staging: wilc1000: remove braces around single statement blocks

index e11d3d3..ff7266c 100644
@@ -171,9 +171,9 @@ static struct txq_entry_t *wilc_wlan_txq_remove_from_head(void)
 	if (p->txq_head) {
 		tqe = p->txq_head;
 		p->txq_head = tqe->next;
-		if (p->txq_head) {
+		if (p->txq_head)
 			p->txq_head->prev = NULL;
-		}
+
 		p->txq_entries -= 1;
 
 

@@ -312,9 +312,8 @@ static inline int add_TCP_track_session(u32 src_prt, u32 dst_prt, u32 seq)
 static inline int Update_TCP_track_session(u32 index, u32 Ack)
 {
 
-	if (Ack > Acks_keep_track_info[index].Bigger_Ack_num) {
+	if (Ack > Acks_keep_track_info[index].Bigger_Ack_num)
 		Acks_keep_track_info[index].Bigger_Ack_num = Ack;
-	}
 	return 0;
 
 }

@@ -388,9 +387,9 @@ static inline int tcp_process(struct txq_entry_t *tqe)
 						break;
 					}
 				}
-				if (i == Opened_TCP_session) {
+				if (i == Opened_TCP_session)
 					add_TCP_track_session(0, 0, seq_no);
-				}
+
 				add_TCP_Pending_Ack(Ack_no, i, tqe);
 
 

@@ -671,9 +670,9 @@ static inline void chip_wakeup(void)
 				usleep_range(2 * 1000, 2 * 1000);
 				/* Make sure chip is awake. This is an extra step that can be removed */
 				/* later to avoid the bus access overhead */
-				if ((wilc_get_chipid(true) == 0)) {
+				if ((wilc_get_chipid(true) == 0))
 					wilc_debug(N_ERR, "Couldn't read chip id. Wake up failed\n");
-				}
+
 			} while ((wilc_get_chipid(true) == 0) && ((++trials % 3) == 0));
 
 		} while (wilc_get_chipid(true) == 0);

@@ -697,9 +696,9 @@ static inline void chip_wakeup(void)
 				/* later to avoid the bus access overhead */
 				g_wlan.hif_func.hif_read_reg(0xf1, &clk_status_reg);
 
-				if ((clk_status_reg & 0x1) == 0) {
+				if ((clk_status_reg & 0x1) == 0)
 					wilc_debug(N_ERR, "clocks still OFF. Wake up failed\n");
-				}
+
 			}
 			/* in case of failure, Reset the wakeup bit to introduce a new edge on the next loop */
 			if ((clk_status_reg & 0x1) == 0) {

@@ -761,9 +760,9 @@ static inline void chip_wakeup(void)
 
 			/* Make sure chip is awake. This is an extra step that can be removed */
 			/* later to avoid the bus access overhead */
-			if ((wilc_get_chipid(true) == 0)) {
+			if ((wilc_get_chipid(true) == 0))
 				wilc_debug(N_ERR, "Couldn't read chip id. Wake up failed\n");
-			}
+
 		} while ((wilc_get_chipid(true) == 0) && ((++trials % 3) == 0));
 
 	} while (wilc_get_chipid(true) == 0);

@@ -850,23 +849,23 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount)
 		do {
 			if ((tqe != NULL) && (i < (WILC_VMM_TBL_SIZE - 1)) /* reserve last entry to 0 */) {
 
-				if (tqe->type == WILC_CFG_PKT) {
+				if (tqe->type == WILC_CFG_PKT)
 					vmm_sz = ETH_CONFIG_PKT_HDR_OFFSET;
-				}
-				else if (tqe->type == WILC_NET_PKT) {
+
+				else if (tqe->type == WILC_NET_PKT)
 					vmm_sz = ETH_ETHERNET_HDR_OFFSET;
-				}
-				else {
+
+				else
 					vmm_sz = HOST_HDR_OFFSET;
-				}
+
 				vmm_sz += tqe->buffer_size;
 				PRINT_D(TX_DBG, "VMM Size before alignment = %d\n", vmm_sz);
 				if (vmm_sz & 0x3) {                                                                                                     /* has to be word aligned */
 					vmm_sz = (vmm_sz + 4) & ~0x3;
 				}
-				if ((sum + vmm_sz) > LINUX_TX_SIZE) {
+				if ((sum + vmm_sz) > LINUX_TX_SIZE)
 					break;
-				}
+
 				PRINT_D(TX_DBG, "VMM Size AFTER alignment = %d\n", vmm_sz);
 				vmm_table[i] = vmm_sz / 4;                                                                                /* table take the word size */
 				PRINT_D(TX_DBG, "VMMTable entry size = %d\n", vmm_table[i]);

@@ -929,9 +928,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount)
 			}
 		} while (!p->quit);
 
-		if (!ret) {
+		if (!ret)
 			goto _end_;
-		}
 
 		timeout = 200;
 		do {

@@ -983,9 +981,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount)
 				break;
 			}
 
-			if (!ret) {
+			if (!ret)
 				break;
-			}
 
 			if (entries == 0) {
 				PRINT_WRN(GENERIC_DBG, "[wilc txq]: no more buffer in the chip (reg: %08x), retry later [[ %d, %x ]]\n", reg, i, vmm_table[i - 1]);

@@ -1008,9 +1005,9 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount)
 			}
 		} while (1);
 
-		if (!ret) {
+		if (!ret)
 			goto _end_;
-		}
+
 		if (entries == 0) {
 			ret = WILC_TX_ERR_NO_BUF;
 			goto _end_;

@@ -1066,9 +1063,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount)
 				if (tqe->tx_complete_func)
 					tqe->tx_complete_func(tqe->priv, tqe->status);
 				#ifdef TCP_ACK_FILTER
-				if (tqe->tcp_PendingAck_index != NOT_TCP_ACK) {
+				if (tqe->tcp_PendingAck_index != NOT_TCP_ACK)
 					Pending_Acks_info[tqe->tcp_PendingAck_index].txqe = NULL;
-				}
 				#endif
 				kfree(tqe);
 			} else {

@@ -1197,9 +1193,8 @@ static void wilc_wlan_handle_rxq(void)
 						 *      wake up the waiting task...
 						 **/
 						PRINT_D(RX_DBG, "p->cfg_seq_no = %d - rsp.seq_no = %d\n", p->cfg_seq_no, rsp.seq_no);
-						if (p->cfg_seq_no == rsp.seq_no) {
+						if (p->cfg_seq_no == rsp.seq_no)
 							up(&g_linux_wlan->cfg_event);
-						}
 					} else if (rsp.type == WILC_CFG_RSP_STATUS) {
 						/**
 						 *      Call back to indicate status...

@@ -1222,9 +1217,9 @@ static void wilc_wlan_handle_rxq(void)
 #endif
 		kfree(rqe);
 
-		if (has_packet) {
+		if (has_packet)
 			linux_wlan_rx_complete();
-		}
+
 	} while (1);
 
 	p->rxq_exit = 1;

@@ -1365,9 +1360,9 @@ void wilc_handle_isr(void)
 	acquire_bus(ACQUIRE_AND_WAKEUP);
 	g_wlan.hif_func.hif_read_int(&int_status);
 
-	if (int_status & PLL_INT_EXT) {
+	if (int_status & PLL_INT_EXT)
 		wilc_pllupdate_isr_ext(int_status);
-	}
+
 	if (int_status & DATA_INT_EXT) {
 		wilc_wlan_handle_isr_ext(int_status);
 	#ifndef WILC_OPTIMIZE_SLEEP_INT

@@ -1375,9 +1370,8 @@ void wilc_handle_isr(void)
 		genuChipPSstate = CHIP_WAKEDUP;
 	#endif
 	}
-	if (int_status & SLEEP_INT_EXT) {
+	if (int_status & SLEEP_INT_EXT)
 		wilc_sleeptimer_isr_ext(int_status);
-	}
 
 	if (!(int_status & (ALL_INT_EXT))) {
 #ifdef WILC_SDIO

@@ -2052,9 +2046,8 @@ u16 Set_machw_change_vir_if(bool bValue)
 	/*Reset WILC_CHANGING_VIR_IF register to allow adding futrue keys to CE H/W*/
 	mutex_lock(&g_linux_wlan->hif_cs);
 	ret = (&g_wlan)->hif_func.hif_read_reg(WILC_CHANGING_VIR_IF, &reg);
-	if (!ret) {
+	if (!ret)
 		PRINT_ER("Error while Reading reg WILC_CHANGING_VIR_IF\n");
-	}
 
 	if (bValue)
 		reg |= BIT(31);

@@ -2063,9 +2056,9 @@ u16 Set_machw_change_vir_if(bool bValue)
 
 	ret = (&g_wlan)->hif_func.hif_write_reg(WILC_CHANGING_VIR_IF, reg);
 
-	if (!ret) {
+	if (!ret)
 		PRINT_ER("Error while writing reg WILC_CHANGING_VIR_IF\n");
-	}
+
 	mutex_unlock(&g_linux_wlan->hif_cs);
 
 	return ret;