configs: Add support for Toradex Colibri Vybrid modules
RFC PATCH 1/1 configs: Add support for Toradex Colibri Vybrid modules
This is a minimal default configuration for Colibri Vybrid modules tested on Colibri Vybrid VF50 and VF61.
Vybrid is well supported in mainline kernel by Toradex however we use the custom git branches maintained by Toradex. The configuration only builds a minimal root filesystem and u-boot plus flash scripts support is not added at the moment.
Signed-off-by Sanchayan Maity <[email protected]>
--- board/toradex/colibri-vf/readme.txt | 21 +++++++++++++++++++++ configs/colibri_vf_defconfig | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) create mode 100644 board/toradex/colibri-vf/readme.txt create mode 100644 configs/colibri_vf_defconfig
board/toradex/colibri-vf/readme.txt new file +21 -0
@@ -0,0 +1,21 @@ +Build instructions +------------------ + +As a regular user configure and then build: + +$ make colibri_vf_defconfig +$ make + +This configuration will use a linux kernel from the git trees +maintained by Toradex and build a minimal root file system. + +Flashing the board +------------------ + +Details can be found at: +http://developer.toradex.com/knowledge-base/flashing-linux-on-vybrid-modules + +The above configuration would result in building of rootfs.ubifs image. After +preparing the SD card as per the instructions on the above article, replace the +ubifs.img file in the SD card with rootfs.ubifs image file, renaming it to +ubifs.img and follow the updation procedure on the above article.
configs/colibri_vf_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +BR2_arm=y +BR2_cortex_a5=y +BR2_ARM_EABIHF=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_FPU_NEON_VFPV4=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_PACKAGE_HOST_GDB=y +BR2_PACKAGE_HOST_GDB_PYTHON=y +BR2_GDB_VERSION_7_8=y +BR2_ENABLE_LOCALE_PURGE=y +BR2_TARGET_OPTIMIZATION="-pipe" +BR2_TARGET_GENERIC_HOSTNAME="colibri-vf" +BR2_TARGET_GENERIC_ISSUE="Colibri VF 20151007" +BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.toradex.com/linux-toradex.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db509ca6ce2a4c04fe0d2a2e0611bb917ebe4aa8" +BR2_LINUX_KERNEL_DEFCONFIG="colibri_vf" +BR2_LINUX_KERNEL_ZIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="vf610-colibri-eval-v3 vf500-colibri-eval-v3" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_IPROUTE2=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x800 +BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=8112 +BR2_TARGET_ROOTFS_UBIFS_RT_LZO=y +BR2_TARGET_ROOTFS_UBIFS_NONE=y +BR2_TARGET_ROOTFS_UBIFS_OPTS="--space-fixup" +BR2_TARGET_ROOTFS_UBI=y +BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x20000 +BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048 +BR2_TARGET_ROOTFS_UBI_OPTS=""
Signature · 1 line
2.6.1
RFC PATCH 1/1 configs: Add support for Toradex Colibri Vybrid modules
Hello,
Quoted 50 lines · Sanchayan Maity
This is a minimal default configuration for Colibri Vybrid modules tested on Colibri Vybrid VF50 and VF61.
Vybrid is well supported in mainline kernel by Toradex however we use the custom git branches maintained by Toradex. The configuration only builds a minimal root filesystem and u-boot plus flash scripts support is not added at the moment.
Signed-off-by Sanchayan Maity <[email protected]>--- board/toradex/colibri-vf/readme.txt | 21 +++++++++++++++++++++ configs/colibri_vf_defconfig | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) create mode 100644 board/toradex/colibri-vf/readme.txt create mode 100644 configs/colibri_vf_defconfigboard/toradex/colibri-vf/readme.txt new file +21
-0@@ -0,0 +1,21 @@ +Build instructions +------------------ + +As a regular user configure and then build: + +$ make colibri_vf_defconfig +$ make + +This configuration will use a linux kernel from the git trees +maintained by Toradex and build a minimal root file system. + +Flashing the board +------------------ + +Details can be found at: +http://developer.toradex.com/knowledge-base/flashing-linux-on-vybrid-modules + +The above configuration would result in building of rootfs.ubifs image. After +preparing the SD card as per the instructions on the above article, replace the +ubifs.img file in the SD card with rootfs.ubifs image file, renaming it to +ubifs.img and follow the updation procedure on the above article.configs/colibri_vf_defconfig new file +1
-0@@ -0,0 +1,36 @@ +BR2_arm=y
configs/colibri_vf_defconfig line 11
Quoted 10 lines
configs/colibri_vf_defconfig new file +10
-0+BR2_cortex_a5=y +BR2_ARM_EABIHF=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_FPU_NEON_VFPV4=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_PACKAGE_HOST_GDB=y +BR2_PACKAGE_HOST_GDB_PYTHON=y +BR2_GDB_VERSION_7_8=y +BR2_ENABLE_LOCALE_PURGE=y +BR2_TARGET_OPTIMIZATION="-pipe"
I believe these last two should be removed?. I had plans of removing it but forgot before sending the patch.
Will take care of it in the next version once additional comments are made on this one.
Thanks & Regards,
Sanchayan.
Quoted 28 lines
configs/colibri_vf_defconfig new file +25
-0+BR2_TARGET_GENERIC_HOSTNAME="colibri-vf" +BR2_TARGET_GENERIC_ISSUE="Colibri VF 20151007" +BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.toradex.com/linux-toradex.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="db509ca6ce2a4c04fe0d2a2e0611bb917ebe4aa8" +BR2_LINUX_KERNEL_DEFCONFIG="colibri_vf" +BR2_LINUX_KERNEL_ZIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="vf610-colibri-eval-v3 vf500-colibri-eval-v3" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_IPROUTE2=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x800 +BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=8112 +BR2_TARGET_ROOTFS_UBIFS_RT_LZO=y +BR2_TARGET_ROOTFS_UBIFS_NONE=y +BR2_TARGET_ROOTFS_UBIFS_OPTS="--space-fixup" +BR2_TARGET_ROOTFS_UBI=y +BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x20000 +BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048 +BR2_TARGET_ROOTFS_UBI_OPTS=""Signature · 1 line
2.6.1