ARM: dts: sun6i: Add support for Sinlinx A31s SDK board

The Sinlinx A31s SDK is a A31s based module/baseboard development kit.

The core module has the SoC, PMIC, DRAM, eMMC and supporting components. There are also pads for UART0, JTAG and I2S.

The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0 hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume buttons, RS232 style UART and USB OTG (though VBUS is not connected). Various headers are available for other addon modules, such as SDIO WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.

---

Changes since v2:

- Dropped i2c0 and i2c1

---
 arch/arm/boot/dts/Makefile                     |   1 +
 arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 140 ++++++++++++++++++++++
 arch/arm/boot/dts/sun6i-a31s-sina31s.dts       | 153 +++++++++++++++++++++++++
 3 files changed, 294 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
 create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s.dts

index 71f965504391..9df431dc1d16 100644
@@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-m9.dtb \
 	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-sina31s.dtb \
 	sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \

2.6.1

Applied, thanks!
Maxime

Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151019/35dac508/attachment.sig>