simplify block layer based on immutable biovecs
Subsystems (24)
v6 cover simplify block layer based on immutable biovecs
Hi Jens,
Neil/Mike/Martin have acked/reviewed PATCH 1. Now it's ready. Could you please apply this series?
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
Please note that, for discard, we cap the size at 2G. We'll change it to UINT_MAX after the splitting code in DM thinp is rewritten.
v6:
- rebase on top of 4.2-rc6+
- fix discard/write_same 32bit bi_size overflow issue
- add ACKs/Review from Mike/Christoph/Martin/Steven
v5:
- rebase on top of 4.2-rc1
- reorder patch 6,7
- add NeilBrown's ACKs
- fix memory leak: free "bio_split" bioset in blk_release_queue()
v4:
- rebase on top of 4.1-rc4
- use BIO_POOL_SIZE instead of number 4 for bioset_create()
- call blk_queue_split() in blk_mq_make_request()
- call blk_queue_split() in zram_make_request()
- add patch "block: remove bio_get_nr_vecs()"
- remove split code in blkdev_issue_discard()
- drop patch "md/raid10: make sync_request_write() call bio_copy_data()". NeilBrown queued it.
- drop patch "block: allow __blk_queue_bounce() to handle bios larger than BIO_MAX_PAGES". Will send it seperately
v3:
- rebase on top of 4.1-rc2
- support for QUEUE_FLAG_SG_GAPS
- update commit logs of patch 2&4
- split bio for chunk_aligned_read
v2: https://lkml.org/lkml/2015/4/28/28
v1: https://lkml.org/lkml/2014/12/22/128
This is the 6th attempt of simplifying block layer based on immutable biovecs. Immutable biovecs, implemented by Kent Overstreet, have been available in mainline since v3.14. Its original goal was actually making generic_make_request() accept arbitrarily sized bios, and pushing the splitting down to the drivers or wherever it's required. See also discussions in the past, [1] [2] [3].
This will bring not only performance improvements, but also a great amount of reduction in code complexity all over the block layer. Performance gain is possible due to the fact that bio_add_page() does not have to check unnecesary conditions such as queue limits or if biovecs are mergeable. Those will be delegated to the driver level. Kent already said that he actually benchmarked the impact of this with fio on a micron p320h, which showed definitely a positive impact.
Moreover, this patchset also allows a lot of code to be deleted, mainly because of removal of merge_bvec_fn() callbacks. We have been aware that it has been always a delicate issue for stacking block drivers (e.g. md and bcache) to handle merging bio consistently. This simplication will help every individual block driver avoid having such an issue.
Patches are against 4.2-rc6+. These are also available in my git repo at:
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
git://git.kernel.org/pub/scm/linux/kernel/git/mlin/linux.git block-generic-req
This patchset is a prerequisite of other consecutive patchsets, e.g. multipage biovecs, rewriting plugging, or rewriting direct-IO, which are excluded this time. That means, this patchset should not bring any regression to end-users.
Comments are welcome.
Ming
[1] https://lkml.org/lkml/2014/11/23/263
[2] https://lkml.org/lkml/2013/11/25/732
[3] https://lkml.org/lkml/2014/2/26/618
Dongsu Park (1):
Documentation: update notes in biovecs about arbitrarily sized bios
Kent Overstreet (8):
block: make generic_make_request handle arbitrarily sized bios
block: simplify bio_add_page()
bcache: remove driver private bio splitting code
btrfs: remove bio splitting and merge_bvec_fn() calls md/raid5: get rid of bio_fits_rdev()
block: kill merge_bvec_fn() completely
fs: use helper bio_add_page() instead of open coding on bi_io_vec
block: remove bio_get_nr_vecs()
Ming Lin (2):
block: remove split code in blkdev_issue_{discard,write_same} md/raid5: split bio for chunk_aligned_read
Documentation/block/biovecs.txt | 10 +- block/bio.c | 152 ++++++++++------------------ block/blk-core.c | 19 ++-- block/blk-lib.c | 47 ++------- block/blk-merge.c | 148 +++++++++++++++++++++++++-- block/blk-mq.c | 4 + block/blk-settings.c | 22 ---- block/blk-sysfs.c | 3 + drivers/block/drbd/drbd_int.h | 1 - drivers/block/drbd/drbd_main.c | 1 - drivers/block/drbd/drbd_req.c | 37 +------ drivers/block/pktcdvd.c | 27 +---- drivers/block/ps3vram.c | 2 + drivers/block/rbd.c | 47 --------- drivers/block/rsxx/dev.c | 2 + drivers/block/umem.c | 2 + drivers/block/zram/zram_drv.c | 2 + drivers/md/bcache/bcache.h | 18 ---- drivers/md/bcache/io.c | 101 +----------------- drivers/md/bcache/journal.c | 4 +- drivers/md/bcache/request.c | 16 +-- drivers/md/bcache/super.c | 32 +----- drivers/md/bcache/util.h | 5 +- drivers/md/bcache/writeback.c | 4 +- drivers/md/dm-cache-target.c | 21 ---- drivers/md/dm-crypt.c | 16 --- drivers/md/dm-era-target.c | 15 --- drivers/md/dm-flakey.c | 16 --- drivers/md/dm-io.c | 2 +- drivers/md/dm-linear.c | 16 --- drivers/md/dm-log-writes.c | 16 --- drivers/md/dm-raid.c | 19 ---- drivers/md/dm-snap.c | 15 --- drivers/md/dm-stripe.c | 21 ---- drivers/md/dm-table.c | 8 -- drivers/md/dm-thin.c | 31 ------ drivers/md/dm-verity.c | 16 --- drivers/md/dm.c | 125 +---------------------- drivers/md/dm.h | 2 - drivers/md/linear.c | 43 -------- drivers/md/md.c | 28 +---- drivers/md/md.h | 12 --- drivers/md/multipath.c | 21 ---- drivers/md/raid0.c | 56 ---------- drivers/md/raid0.h | 2 - drivers/md/raid1.c | 58 +---------- drivers/md/raid10.c | 121 +--------------------- drivers/md/raid5.c | 92 ++++++----------- drivers/s390/block/dcssblk.c | 2 + drivers/s390/block/xpram.c | 2 + drivers/staging/lustre/lustre/llite/lloop.c | 2 + fs/btrfs/compression.c | 5 +- fs/btrfs/extent_io.c | 9 +- fs/btrfs/inode.c | 3 +- fs/btrfs/scrub.c | 18 +--- fs/btrfs/volumes.c | 72 ------------- fs/buffer.c | 7 +- fs/direct-io.c | 2 +- fs/ext4/page-io.c | 3 +- fs/ext4/readpage.c | 2 +- fs/f2fs/data.c | 2 +- fs/gfs2/lops.c | 9 +- fs/jfs/jfs_logmgr.c | 14 +-- fs/logfs/dev_bdev.c | 4 +- fs/mpage.c | 4 +- fs/nilfs2/segbuf.c | 2 +- fs/xfs/xfs_aops.c | 3 +- include/linux/bio.h | 1 - include/linux/blkdev.h | 13 +-- include/linux/device-mapper.h | 4 - mm/page_io.c | 8 +- 71 files changed, 337 insertions(+), 1332 deletions(-)
PATCH v6 1/11 block: make generic_make_request handle arbitrarily sized bios
From: Kent Overstreet <[email protected]>
The way the block layer is currently written, it goes to great lengths to avoid having to split bios; upper layer code (such as bio_add_page()) checks what the underlying device can handle and tries to always create bios that don't need to be split.
But this approach becomes unwieldy and eventually breaks down with stacked devices and devices with dynamic limits, and it adds a lot of complexity. If the block layer could split bios as needed, we could eliminate a lot of complexity elsewhere - particularly in stacked drivers. Code that creates bios can then create whatever size bios are convenient, and more importantly stacked drivers don't have to deal with both their own bio size limitations and the limitations of the (potentially multiple) devices underneath them. In the future this will let us delete merge_bvec_fn and a bunch of other code.
We do this by adding calls to blk_queue_split() to the various make_request functions that need it - a few can already handle arbitrary size bios. Note that we add the call _after_ any call to blk_queue_bounce(); this means that blk_queue_split() and blk_recalc_rq_segments() don't need to be concerned with bouncing affecting segment merging.
Some make_request_fn() callbacks were simple enough to audit and verify they don't need blk_queue_split() calls. The skipped ones are:
* nfhd_make_request (arch/m68k/emu/nfblock.c)
* axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
* simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
* brd_make_request (ramdisk - drivers/block/brd.c)
* mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
* loop_make_request
* null_queue_bio
* bcache's make_request fns
Some others are almost certainly safe to remove now, but will be left for future patches.
--- block/blk-core.c | 19 ++-- block/blk-merge.c | 159 ++++++++++++++++++++++++++-- block/blk-mq.c | 4 + block/blk-sysfs.c | 3 + drivers/block/drbd/drbd_req.c | 2 + drivers/block/pktcdvd.c | 6 +- drivers/block/ps3vram.c | 2 + drivers/block/rsxx/dev.c | 2 + drivers/block/umem.c | 2 + drivers/block/zram/zram_drv.c | 2 + drivers/md/dm.c | 2 + drivers/md/md.c | 2 + drivers/s390/block/dcssblk.c | 2 + drivers/s390/block/xpram.c | 2 + drivers/staging/lustre/lustre/llite/lloop.c | 2 + include/linux/blkdev.h | 3 + 16 files changed, 192 insertions(+), 22 deletions(-)
block/blk-core.c +9 -10
@@ -645,6 +645,10 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)if (q->id <0 ) goto fail_q; + q->bio_split =bioset_create (BIO_POOL_SIZE ,0 ); +if (!q->bio_split) + goto fail_id; + q->backing_dev_info.ra_pages = (VM_MAX_READAHEAD *1024 ) /PAGE_CACHE_SIZE ; q->backing_dev_info.capabilities =BDI_CAP_CGROUP_WRITEBACK ;
@@ -653,7 +657,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) err =bdi_init (&q->backing_dev_info);if (err) - goto fail_id; + goto fail_split;setup_timer (&q->backing_dev_info.laptop_mode_wb_timer, laptop_mode_timer_fn, (unsigned long ) q);
@@ -695,6 +699,8 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) fail_bdi:bdi_destroy (&q->backing_dev_info); +fail_split: +bioset_free (q->bio_split); fail_id:ida_simple_remove (&blk_queue_ida, q->id); fail_q:
@@ -1612,6 +1618,8 @@ static void blk_queue_bio(struct request_queue *q, struct bio *bio)struct request *req;unsigned int request_count =0 ; +blk_queue_split (q, &bio, q->bio_split); +/* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even
@@ -1832,15 +1840,6 @@ generic_make_request_checks(struct bio *bio) goto end_io; } -if (likely (bio_is_rw (bio) && - nr_sectors >queue_max_hw_sectors (q))) { -printk (KERN_ERR "bio too big device %s (%u > %u)\n" , -bdevname (bio->bi_bdev, b), -bio_sectors (bio), -queue_max_hw_sectors (q)); - goto end_io; - } - part = bio->bi_bdev->bd_part;if (should_fail_request (part, bio->bi_iter.bi_size) || should_fail_request(&part_to_disk(part)->part0,
block/blk-merge.c +149 -10
189 lines not on this page · raw message
block/blk-mq.c +4 -0
@@ -1287,6 +1287,8 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)return ; } +blk_queue_split (q, &bio, q->bio_split); +if (!is_flush_fua && !blk_queue_nomerges (q) &&blk_attempt_plug_merge (q, bio, &request_count, &same_queue_rq))return ;
@@ -1372,6 +1374,8 @@ static void blk_sq_make_request(struct request_queue *q, struct bio *bio)return ; } +blk_queue_split (q, &bio, q->bio_split); +if (!is_flush_fua && !blk_queue_nomerges (q) &&blk_attempt_plug_merge (q, bio, &request_count,NULL ))return ;
block/blk-sysfs.c +3 -0
@@ -523,6 +523,9 @@ static void blk_release_queue(struct kobject *kobj)blk_trace_shutdown (q); +if (q->bio_split) +bioset_free (q->bio_split); +ida_simple_remove (&blk_queue_ida, q->id);call_rcu (&q->rcu_head, blk_free_queue_rcu); }
drivers/block/drbd/drbd_req.c +2 -0
@@ -1497,6 +1497,8 @@ void drbd_make_request(struct request_queue *q, struct bio *bio)struct drbd_device *device = (struct drbd_device *) q->queuedata;unsigned long start_jif; +blk_queue_split (q, &bio, q->bio_split); + start_jif = jiffies;/*
drivers/block/pktcdvd.c +4 -2
@@ -2447,6 +2447,10 @@ static void pkt_make_request(struct request_queue *q, struct bio *bio)char b[BDEVNAME_SIZE ];struct bio *split; +blk_queue_bounce (q, &bio); + +blk_queue_split (q, &bio, q->bio_split); + pd = q->queuedata;if (!pd) { pr_err("%s incorrect request queue\n",
@@ -2477,8 +2481,6 @@ static void pkt_make_request(struct request_queue *q, struct bio *bio) goto end_io; } -blk_queue_bounce (q, &bio); - do { sector_t zone = get_zone(bio->bi_iter.bi_sector, pd); sector_t last_zone = get_zone(bio_end_sector(bio) - 1, pd);
drivers/block/ps3vram.c +2 -0
@@ -605,6 +605,8 @@ static void ps3vram_make_request(struct request_queue *q, struct bio *bio)dev_dbg (&dev->core,"%s\n" , __func__); +blk_queue_split (q, &bio, q->bio_split); +spin_lock_irq (&priv->lock); busy = !bio_list_empty (&priv->list);bio_list_add (&priv->list, bio);
drivers/block/rsxx/dev.c +2 -0
@@ -148,6 +148,8 @@ static void rsxx_make_request(struct request_queue *q, struct bio *bio)struct rsxx_bio_meta *bio_meta;int st = -EINVAL ; +blk_queue_split (q, &bio, q->bio_split); +might_sleep ();if (!card)
drivers/block/umem.c +2 -0
@@ -531,6 +531,8 @@ static void mm_make_request(struct request_queue *q, struct bio *bio) (unsigned long long )bio->bi_iter.bi_sector, bio->bi_iter.bi_size); +blk_queue_split (q, &bio, q->bio_split); +spin_lock_irq (&card->lock); *card->biotail = bio; bio->bi_next =NULL ;
drivers/block/zram/zram_drv.c +2 -0
@@ -901,6 +901,8 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)if (unlikely (!zram_meta_get (zram))) goto error; +blk_queue_split (queue, &bio, queue->bio_split); +if (!valid_io_request (zram, bio->bi_iter.bi_sector, bio->bi_iter.bi_size)) {atomic64_inc (&zram->stats.invalid_io);
drivers/md/dm.c +2 -0
@@ -1789,6 +1789,8 @@ static void dm_make_request(struct request_queue *q, struct bio *bio) map =dm_get_live_table (md, &srcu_idx); +blk_queue_split (q, &bio, q->bio_split); +generic_start_io_acct (rw,bio_sectors (bio), &dm_disk (md)->part0);/* if we're suspended, we have to queue this io for later */
drivers/md/md.c +2 -0
@@ -257,6 +257,8 @@ static void md_make_request(struct request_queue *q, struct bio *bio)unsigned int sectors;int cpu; +blk_queue_split (q, &bio, q->bio_split); +if (mddev ==NULL || mddev->pers ==NULL || !mddev->ready) {bio_io_error (bio);
drivers/s390/block/dcssblk.c +2 -0
@@ -826,6 +826,8 @@ dcssblk_make_request(struct request_queue *q, struct bio *bio)unsigned long source_addr;unsigned long bytes_done; +blk_queue_split (q, &bio, q->bio_split); + bytes_done =0 ; dev_info = bio->bi_bdev->bd_disk->private_data;if (dev_info ==NULL )
drivers/s390/block/xpram.c +2 -0
@@ -190,6 +190,8 @@ static void xpram_make_request(struct request_queue *q, struct bio *bio)unsigned long page_addr;unsigned long bytes; +blk_queue_split (q, &bio, q->bio_split); +if ((bio->bi_iter.bi_sector &7 ) !=0 || (bio->bi_iter.bi_size &4095 ) !=0 )/* Request is not page-aligned. */
drivers/staging/lustre/lustre/llite/lloop.c +2 -0
@@ -340,6 +340,8 @@ static void loop_make_request(struct request_queue *q, struct bio *old_bio)int rw =bio_rw (old_bio);int inactive; +blk_queue_split (q, &old_bio, q->bio_split); +if (!lo) goto err;
include/linux/blkdev.h +3 -0
@@ -462,6 +462,7 @@ struct request_queue {struct blk_mq_tag_set *tag_set;struct list_head tag_set_list; +struct bio_set *bio_split; };#define QUEUE_FLAG_QUEUED 1/* uses generic tag queueing */
@@ -782,6 +783,8 @@ extern void blk_rq_unprep_clone(struct request *rq);extern int blk_insert_cloned_request (struct request_queue *q,struct request *rq);extern void blk_delay_queue (struct request_queue *,unsigned long ); +extern void blk_queue_split (struct request_queue *,struct bio **, +struct bio_set *);extern void blk_recount_segments (struct request_queue *,struct bio *);extern int scsi_verify_blk_ioctl (struct block_device *,unsigned int ); extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t,
Signature · 1 line
2.1.4
PATCH v6 2/11 block: simplify bio_add_page()
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
Since generic_make_request() can now handle arbitrary size bios, all we have to do is make sure the bvec array doesn't overflow. __bio_add_page() doesn't need to call ->merge_bvec_fn(), where we can get rid of unnecessary code paths.
Removing the call to ->merge_bvec_fn() is also fine, as no driver that implements support for BLOCK_PC commands even has a ->merge_bvec_fn() method.
[dpark: rebase and resolve merge conflicts, change a couple of comments,
make bio_add_page() warn once upon a cloned bio.]
--- block/bio.c | 135 +++++++++++++++++++++++++----------------------------------- 1 file changed, 55 insertions(+), 80 deletions(-)
block/bio.c +55 -80
@@ -714,9 +714,23 @@ int bio_get_nr_vecs(struct block_device *bdev) }EXPORT_SYMBOL (bio_get_nr_vecs); -static int __bio_add_page (struct request_queue *q,struct bio *bio,struct page - *page,unsigned int len,unsigned int offset, -unsigned int max_sectors) +/** +* bio_add_pc_page - attempt to add page to bio +* @q: the target queue +* @bio: destination bio +* @page: page to add +* @len: vec entry length +* @offset: vec entry offset +* +* Attempt to add a page to the bio_vec maplist. This can fail for a +* number of reasons, such as the bio being full or target block device +* limitations. The target block device must allow bio's up to PAGE_SIZE, +* so it is always possible to add a single page to an empty bio. +* +* This should only be used by REQ_PC bios. +*/ +int bio_add_pc_page (struct request_queue *q,struct bio *bio,struct page + *page,unsigned int len,unsigned int offset) {int retried_segments =0 ;struct bio_vec *bvec;
@@ -727,7 +741,7 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct pageif (unlikely (bio_flagged (bio,BIO_CLONED )))return 0 ; -if (((bio->bi_iter.bi_size + len) >>9 ) > max_sectors) +if (((bio->bi_iter.bi_size + len) >>9 ) >queue_max_hw_sectors (q))return 0 ;/*
@@ -740,28 +754,7 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct pageif (page == prev->bv_page && offset == prev->bv_offset + prev->bv_len) { -unsigned int prev_bv_len = prev->bv_len; prev->bv_len += len; - -if (q->merge_bvec_fn) { -struct bvec_merge_data bvm = { -/* prev_bvec is already charged in -bi_size, discharge it in order to -simulate merging updated prev_bvec -as new bvec. */ - .bi_bdev = bio->bi_bdev, - .bi_sector = bio->bi_iter.bi_sector, - .bi_size = bio->bi_iter.bi_size - - prev_bv_len, - .bi_rw = bio->bi_rw, - }; - -if (q->merge_bvec_fn (q, &bvm, prev) < prev->bv_len) { - prev->bv_len -= len; -return 0 ; - } - } - bio->bi_iter.bi_size += len; goto done; }
@@ -804,27 +797,6 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct pageblk_recount_segments (q, bio); } -/* -* if queue has other restrictions (eg varying max sector size -* depending on offset), it can specify a merge_bvec_fn in the -* queue to get further control -*/ -if (q->merge_bvec_fn) { -struct bvec_merge_data bvm = { - .bi_bdev = bio->bi_bdev, - .bi_sector = bio->bi_iter.bi_sector, - .bi_size = bio->bi_iter.bi_size - len, - .bi_rw = bio->bi_rw, - }; - -/* -* merge_bvec_fn() returns number of bytes it can accept -* at this offset -*/ -if (q->merge_bvec_fn (q, &bvm, bvec) < bvec->bv_len) - goto failed; - } -/* If we may be able to merge these biovecs, force a recount */ if (bio->bi_vcnt >1 && (BIOVEC_PHYS_MERGEABLE (bvec-1 , bvec))) bio->bi_flags &= ~(1 <<BIO_SEG_VALID );
@@ -841,28 +813,6 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct pageblk_recount_segments (q, bio);return 0 ; } - -/** -* bio_add_pc_page - attempt to add page to bio -* @q: the target queue -* @bio: destination bio -* @page: page to add -* @len: vec entry length -* @offset: vec entry offset -* -* Attempt to add a page to the bio_vec maplist. This can fail for a -* number of reasons, such as the bio being full or target block device -* limitations. The target block device must allow bio's up to PAGE_SIZE, -* so it is always possible to add a single page to an empty bio. -* -* This should only be used by REQ_PC bios. -*/ -int bio_add_pc_page (struct request_queue *q,struct bio *bio,struct page *page, -unsigned int len,unsigned int offset) -{ -return __bio_add_page (q, bio, page, len, offset, -queue_max_hw_sectors (q)); -}EXPORT_SYMBOL (bio_add_pc_page);/**
@@ -872,22 +822,47 @@ EXPORT_SYMBOL(bio_add_pc_page);* @len: vec entry length * @offset: vec entry offset * -* Attempt to add a page to the bio_vec maplist. This can fail for a -* number of reasons, such as the bio being full or target block device -* limitations. The target block device must allow bio's up to PAGE_SIZE, -* so it is always possible to add a single page to an empty bio. +* Attempt to add a page to the bio_vec maplist. This will only fail +* if either bio->bi_vcnt == bio->bi_max_vecs or it's a cloned bio. */ -int bio_add_page (struct bio *bio,struct page *page,unsigned int len, -unsigned int offset) +int bio_add_page (struct bio *bio,struct page *page, +unsigned int len,unsigned int offset) { -struct request_queue *q =bdev_get_queue (bio->bi_bdev); -unsigned int max_sectors; +struct bio_vec *bv; - max_sectors =blk_max_size_offset (q, bio->bi_iter.bi_sector); -if ((max_sectors < (len >>9 )) && !bio->bi_iter.bi_size) - max_sectors = len >>9 ; +/* +* cloned bio must not modify vec list +*/ +if (WARN_ON_ONCE (bio_flagged (bio,BIO_CLONED ))) +return 0 ; -return __bio_add_page (q, bio, page, len, offset, max_sectors); +/* +* For filesystems with a blocksize smaller than the pagesize +* we will often be called with the same page as last time and +* a consecutive offset. Optimize this special case. +*/ +if (bio->bi_vcnt >0 ) { + bv = &bio->bi_io_vec[bio->bi_vcnt -1 ]; + +if (page == bv->bv_page && + offset == bv->bv_offset + bv->bv_len) { + bv->bv_len += len; + goto done; + } + } + +if (bio->bi_vcnt >= bio->bi_max_vecs) +return 0 ; + + bv = &bio->bi_io_vec[bio->bi_vcnt]; + bv->bv_page = page; + bv->bv_len = len; + bv->bv_offset = offset; + + bio->bi_vcnt++; +done: + bio->bi_iter.bi_size += len; +return len; }EXPORT_SYMBOL (bio_add_page);
Signature · 1 line
2.1.4
PATCH v6 3/11 bcache: remove driver private bio splitting code
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
The bcache driver has always accepted arbitrarily large bios and split them internally. Now that every driver must accept arbitrarily large bios this code isn't nessecary anymore.
--- drivers/md/bcache/bcache.h | 18 -------- drivers/md/bcache/io.c | 101 +----------------------------------------- drivers/md/bcache/journal.c | 4 +- drivers/md/bcache/request.c | 16 +++---- drivers/md/bcache/super.c | 32 +------------ drivers/md/bcache/util.h | 5 ++- drivers/md/bcache/writeback.c | 4 +- 7 files changed, 18 insertions(+), 162 deletions(-)
drivers/md/bcache/bcache.h +0 -18
@@ -243,19 +243,6 @@ struct keybuf { DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR); }; -struct bio_split_pool { -struct bio_set *bio_split; -mempool_t *bio_split_hook; -}; - -struct bio_split_hook { -struct closure cl; -struct bio_split_pool *p; -struct bio *bio; -bio_end_io_t *bi_end_io; -void *bi_private; -}; -struct bcache_device {struct closure cl;
@@ -288,8 +275,6 @@ struct bcache_device {int (*cache_miss)(struct btree *,struct search *,struct bio *,unsigned );int (*ioctl) (struct bcache_device *,fmode_t ,unsigned ,unsigned long ); - -struct bio_split_pool bio_split_hook; };struct io {
@@ -454,8 +439,6 @@ struct cache {atomic_long_t meta_sectors_written;atomic_long_t btree_sectors_written;atomic_long_t sectors_written; - -struct bio_split_pool bio_split_hook; };struct gc_stat {
@@ -873,7 +856,6 @@ void bch_bbio_endio(struct cache_set *, struct bio *, int, const char *);void bch_bbio_free (struct bio *,struct cache_set *);struct bio *bch_bbio_alloc (struct cache_set *); -void bch_generic_make_request (struct bio *,struct bio_split_pool *);void __bch_submit_bbio (struct bio *,struct cache_set *);void bch_submit_bbio (struct bio *,struct cache_set *,struct bkey *,unsigned );
drivers/md/bcache/io.c +1 -100
113 lines not on this page · raw message
drivers/md/bcache/journal.c +2 -2
@@ -61,7 +61,7 @@ reread: left = ca->sb.bucket_size - offset; bio->bi_private = &cl;bch_bio_map (bio, data); -closure_bio_submit (bio, &cl, ca); +closure_bio_submit (bio, &cl);closure_sync (&cl);/* This function could be simpler now since we no longer write
@@ -648,7 +648,7 @@ static void journal_write_unlocked(struct closure *cl)spin_unlock (&c->journal.lock);while ((bio =bio_list_pop (&list))) -closure_bio_submit (bio, cl, c->cache[0 ]); +closure_bio_submit (bio, cl);continue_at (cl, journal_write_done,NULL ); }
drivers/md/bcache/request.c +8 -8
@@ -718,7 +718,7 @@ static void cached_dev_read_error(struct closure *cl)/* XXX: invalidate cache */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }continue_at (cl, cached_dev_cache_miss_done,NULL );
@@ -841,7 +841,7 @@ static int cached_dev_cache_miss(struct btree *b, struct search *s, s->cache_miss = miss; s->iop.bio = cache_bio;bio_get (cache_bio); -closure_bio_submit (cache_bio, &s->cl, s->d); +closure_bio_submit (cache_bio, &s->cl);return ret; out_put:
@@ -849,7 +849,7 @@ out_put: out_submit: miss->bi_end_io = request_endio; miss->bi_private = &s->cl; -closure_bio_submit (miss, &s->cl, s->d); +closure_bio_submit (miss, &s->cl);return ret; }
@@ -914,7 +914,7 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s)if (!(bio->bi_rw &REQ_DISCARD ) ||blk_queue_discard (bdev_get_queue (dc->bdev))) -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }else if (s->iop.writeback) {bch_writeback_add (dc); s->iop.bio = bio;
@@ -929,12 +929,12 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s) flush->bi_end_io = request_endio; flush->bi_private = cl; -closure_bio_submit (flush, cl, s->d); +closure_bio_submit (flush, cl); } }else { s->iop.bio =bio_clone_fast (bio,GFP_NOIO , dc->disk.bio_split); -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }closure_call (&s->iop.cl, bch_data_insert,NULL , cl);
@@ -950,7 +950,7 @@ static void cached_dev_nodata(struct closure *cl)bch_journal_meta (s->iop.c, cl);/* If it's a flush, we send the flush to the backing device too */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl);continue_at (cl, cached_dev_bio_complete,NULL ); }
@@ -994,7 +994,7 @@ static void cached_dev_make_request(struct request_queue *q, struct bio *bio) !blk_queue_discard(bdev_get_queue(dc->bdev)))bio_endio (bio,0 ); else - bch_generic_make_request(bio, &d->bio_split_hook); +generic_make_request (bio ); } }
drivers/md/bcache/super.c +2 -30
@@ -59,29 +59,6 @@ struct workqueue_struct *bcache_wq;#define BTREE_MAX_PAGES (256 * 1024 / PAGE_SIZE) -static void bio_split_pool_free (struct bio_split_pool *p) -{ -if (p->bio_split_hook) -mempool_destroy (p->bio_split_hook); - -if (p->bio_split) -bioset_free (p->bio_split); -} - -static int bio_split_pool_init (struct bio_split_pool *p) -{ - p->bio_split =bioset_create (4 ,0 ); -if (!p->bio_split) -return -ENOMEM ; - - p->bio_split_hook =mempool_create_kmalloc_pool (4 , -sizeof (struct bio_split_hook )); -if (!p->bio_split_hook) -return -ENOMEM ; - -return 0 ; -} -/* Superblock */ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
@@ -537,7 +514,7 @@ static void prio_io(struct cache *ca, uint64_t bucket, unsigned long rw) bio->bi_private = ca;bch_bio_map (bio, ca->disk_buckets); -closure_bio_submit (bio, &ca->prio, ca); +closure_bio_submit (bio, &ca->prio);closure_sync (cl); }
@@ -757,7 +734,6 @@ static void bcache_device_free(struct bcache_device *d)put_disk (d->disk); } -bio_split_pool_free (&d->bio_split_hook);if (d->bio_split)bioset_free (d->bio_split);kvfree (d->full_dirty_stripes);
@@ -804,7 +780,6 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size,return minor;if (!(d->bio_split =bioset_create (4 , offsetof(struct bbio , bio))) || -bio_split_pool_init (&d->bio_split_hook) || !(d->disk =alloc_disk (1 ))) {ida_simple_remove (&bcache_minor, minor);return -ENOMEM ;
@@ -1793,8 +1768,6 @@ void bch_cache_release(struct kobject *kobj) ca->set->cache[ca->sb.nr_this_dev] =NULL ; } -bio_split_pool_free (&ca->bio_split_hook); -free_pages ((unsigned long ) ca->disk_buckets,ilog2 (bucket_pages (ca)));kfree (ca->prio_buckets);vfree (ca->buckets);
@@ -1839,8 +1812,7 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) ca->sb.nbuckets)) || !(ca->prio_buckets =kzalloc (sizeof (uint64_t ) *prio_buckets (ca) *2 ,GFP_KERNEL )) || - !(ca->disk_buckets =alloc_bucket_pages (GFP_KERNEL , ca)) || - bio_split_pool_init(&ca->bio_split_hook)) + !(ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca))) return -ENOMEM; ca->prio_last_buckets = ca->prio_buckets +prio_buckets (ca);
drivers/md/bcache/util.h +3 -2
@@ -4,6 +4,7 @@#include <linux/blkdev.h> #include <linux/errno.h> +#include <linux/blkdev.h> #include <linux/kernel.h> #include <linux/llist.h> #include <linux/ratelimit.h>
@@ -570,10 +571,10 @@ static inline sector_t bdev_sectors(struct block_device *bdev)return bdev->bd_inode->i_size >>9 ; } -#define closure_bio_submit (bio, cl, dev) \ +#define closure_bio_submit (bio, cl) \ do { \ closure_get(cl); \ - bch_generic_make_request(bio, &(dev)->bio_split_hook); \ + generic_make_request(bio); \ } while (0)uint64_t bch_crc64_update (uint64_t ,const void *,size_t );
drivers/md/bcache/writeback.c +2 -2
@@ -188,7 +188,7 @@ static void write_dirty(struct closure *cl) io->bio.bi_bdev = io->dc->bdev; io->bio.bi_end_io = dirty_endio; -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty_finish, system_wq); }
@@ -208,7 +208,7 @@ static void read_dirty_submit(struct closure *cl) { struct dirty_io *io = container_of(cl, struct dirty_io, cl); -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty, system_wq); }
Signature · 1 line
2.1.4
Re: bcache: remove driver private bio splitting code
Quoted 4 lines
From: Kent Overstreet Wed, 12 Aug 2015 00:07:13 -0700
The bcache driver has always accepted arbitrarily large bios and split them internally. Now that every driver must accept arbitrarily large bios this code isn't nessecary anymore.
Hi Kent,
Does your patch below make any kernel version assumptions about bio splitting? That doesn't appear so based on the commit message, but thought I'd double-check.
If there is a kernel dependency, then, how far back should this be safe? I'd like to apply to 3.17-rc1 like the other stable commits and stamp it with Cc: stable@ so it will merge forward into 3.18 and onward if it fixes my problem below:
This question comes up because I'm getting the following (discard-related?) backtrace and would like to try the patch. If it fixes the problem I'll stamp it with stable and get it to Jens. Note that bch_generic_make_request() doesn't even exist after this patch, so this backtrace would at least be simplified and possibly fixed:
[ 294.059255] [<ffffffffa049a20d>] bch_generic_make_request+0x15d/0x1f0 [bcache] [ 294.059578] [<ffffffffa049a3b9>] __bch_submit_bbio+0x79/0x80 [bcache] [ 294.059794] [<ffffffffa049a3eb>] bch_submit_bbio+0x2b/0x30 [bcache] [ 294.059983] [<ffffffffa049fabb>] bch_data_insert_start+0xcb/0x5a0 [bcache] [ 294.060169] [<ffffffffa049ffe1>] bch_data_insert+0x51/0xc0 [bcache] [ 294.060354] [<ffffffffa04a0cc4>] cached_dev_make_request+0xbe4/0xdf0 [bcache] [ 294.060652] [<ffffffff81317c20>] generic_make_request+0xe0/0x130 [ 294.060830] [<ffffffff81317ce7>] submit_bio+0x77/0x150 [ 294.061012] [<ffffffff81312906>] ? bio_alloc_bioset+0x1d6/0x330 [ 294.061194] [<ffffffffa04cef90>] ? le64_dec+0x20/0x20 [dm_persistent_data] [ 294.061377] [<ffffffffa04e49be>] __blkdev_issue_discard_async.constprop.59+0x17e/0x210 [dm_thin_pool] [ 294.061695] [<ffffffffa04e55dc>] process_prepared_discard_passdown+0x9c/0x230 [dm_thin_pool] [ 294.062007] [<ffffffff811ac73f>] ? mempool_free+0x2f/0x90 [ 294.062207] [<ffffffffa04e0772>] process_prepared+0x92/0xc0 [dm_thin_pool] [ 294.062404] [<ffffffffa04e5f78>] do_worker+0xb8/0x880 [dm_thin_pool] [ 294.062606] [<ffffffff81014693>] ? __switch_to+0x1e3/0x580 [ 294.062796] [<ffffffff810dc71c>] ? put_prev_task_fair+0x2c/0x40 [ 294.062989] [<ffffffff810ba18d>] process_one_work+0x14d/0x420 [ 294.063171] [<ffffffff810ba952>] worker_thread+0x112/0x520 [ 294.063355] [<ffffffff810ba840>] ? rescuer_thread+0x3e0/0x3e0 [ 294.063560] [<ffffffff810c06a8>] kthread+0xd8/0xf0 [ 294.063737] [<ffffffff810c05d0>] ? kthread_create_on_node+0x1b0/0x1b0 [ 294.063943] [<ffffffff816e4aa2>] ret_from_fork+0x42/0x70 [ 294.064133] [<ffffffff810c05d0>] ? kthread_create_on_node+0x1b0/0x1b0
Thanks!
-Eric
Quoted 412 lines
Signed-off-by Kent Overstreet <[email protected]>[dpark: add more description in commit message]Signed-off-by Dongsu Park <[email protected]>Signed-off-by Ming Lin <[email protected]>--- drivers/md/bcache/bcache.h | 18 -------- drivers/md/bcache/io.c | 101 +----------------------------------------- drivers/md/bcache/journal.c | 4 +- drivers/md/bcache/request.c | 16 +++---- drivers/md/bcache/super.c | 32 +------------ drivers/md/bcache/util.h | 5 ++- drivers/md/bcache/writeback.c | 4 +- 7 files changed, 18 insertions(+), 162 deletions(-)drivers/md/bcache/bcache.h +0
-18@@ -243,19 +243,6 @@ struct keybuf { DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR); }; -struct bio_split_pool { -struct bio_set *bio_split; -mempool_t *bio_split_hook; -}; - -struct bio_split_hook { -struct closure cl; -struct bio_split_pool *p; -struct bio *bio; -bio_end_io_t *bi_end_io; -void *bi_private; -}; -struct bcache_device {struct closure cl;@@ -288,8 +275,6 @@ struct bcache_device {int (*cache_miss)(struct btree *,struct search *,struct bio *,unsigned );int (*ioctl) (struct bcache_device *,fmode_t ,unsigned ,unsigned long ); - -struct bio_split_pool bio_split_hook; };struct io {@@ -454,8 +439,6 @@ struct cache {atomic_long_t meta_sectors_written;atomic_long_t btree_sectors_written;atomic_long_t sectors_written; - -struct bio_split_pool bio_split_hook; };struct gc_stat {@@ -873,7 +856,6 @@ void bch_bbio_endio(struct cache_set *, struct bio *, int, const char *);void bch_bbio_free (struct bio *,struct cache_set *);struct bio *bch_bbio_alloc (struct cache_set *); -void bch_generic_make_request (struct bio *,struct bio_split_pool *);void __bch_submit_bbio (struct bio *,struct cache_set *);void bch_submit_bbio (struct bio *,struct cache_set *,struct bkey *,unsigned );drivers/md/bcache/io.c +1
-100@@ -11,105 +11,6 @@#include <linux/blkdev.h> -static unsigned bch_bio_max_sectors (struct bio *bio) -{ -struct request_queue *q =bdev_get_queue (bio->bi_bdev); -struct bio_vec bv; -struct bvec_iter iter; -unsigned ret =0 , seg =0 ; - -if (bio->bi_rw &REQ_DISCARD ) -return min (bio_sectors (bio), q->limits.max_discard_sectors); - -bio_for_each_segment (bv, bio, iter) { -struct bvec_merge_data bvm = { - .bi_bdev = bio->bi_bdev, - .bi_sector = bio->bi_iter.bi_sector, - .bi_size = ret <<9 , - .bi_rw = bio->bi_rw, - }; - -if (seg ==min_t (unsigned,BIO_MAX_PAGES , -queue_max_segments (q))) -break ; - -if (q->merge_bvec_fn && - q->merge_bvec_fn (q, &bvm, &bv) < (int ) bv.bv_len) -break ; - - seg++; - ret += bv.bv_len >>9 ; - } - - ret =min (ret,queue_max_sectors (q)); - -WARN_ON (!ret); - ret =max_t (int, ret,bio_iovec (bio).bv_len >>9 ); - -return ret; -} - -static void bch_bio_submit_split_done (struct closure *cl) -{ - struct bio_split_hook *s = container_of(cl, struct bio_split_hook, cl); - - s->bio->bi_end_io = s->bi_end_io; - s->bio->bi_private = s->bi_private; -bio_endio (s->bio,0 ); - -closure_debug_destroy (&s->cl); -mempool_free (s, s->p->bio_split_hook); -} - -static void bch_bio_submit_split_endio (struct bio *bio,int error) -{ -struct closure *cl = bio->bi_private; - struct bio_split_hook *s = container_of(cl, struct bio_split_hook, cl); - -if (error) -clear_bit (BIO_UPTODATE , &s->bio->bi_flags); - -bio_put (bio); -closure_put (cl); -} - -void bch_generic_make_request (struct bio *bio,struct bio_split_pool *p) -{ -struct bio_split_hook *s; -struct bio *n; - -if (!bio_has_data (bio) && !(bio->bi_rw &REQ_DISCARD )) - goto submit; - -if (bio_sectors (bio) <=bch_bio_max_sectors (bio)) - goto submit; - - s =mempool_alloc (p->bio_split_hook,GFP_NOIO ); -closure_init (&s->cl,NULL ); - - s->bio = bio; - s->p = p; - s->bi_end_io = bio->bi_end_io; - s->bi_private = bio->bi_private; -bio_get (bio); - -do { - n =bio_next_split (bio,bch_bio_max_sectors (bio), -GFP_NOIO , s->p->bio_split); - - n->bi_end_io = bch_bio_submit_split_endio; - n->bi_private = &s->cl; - -closure_get (&s->cl); -generic_make_request (n); - }while (n != bio); - -continue_at (&s->cl, bch_bio_submit_split_done,NULL ); -return ; -submit: -generic_make_request (bio); -} -/* Bios with headers */ void bch_bbio_free (struct bio *bio,struct cache_set *c)@@ -139,7 +40,7 @@ void __bch_submit_bbio(struct bio *bio, struct cache_set *c) bio->bi_bdev =PTR_CACHE (c, &b->key,0 )->bdev; b->submit_time_us =local_clock_us (); -closure_bio_submit (bio, bio->bi_private,PTR_CACHE (c, &b->key,0 )); +closure_bio_submit (bio, bio->bi_private); } void bch_submit_bbio(struct bio *bio, struct cache_set *c,drivers/md/bcache/journal.c +2
-2@@ -61,7 +61,7 @@ reread: left = ca->sb.bucket_size - offset; bio->bi_private = &cl;bch_bio_map (bio, data); -closure_bio_submit (bio, &cl, ca); +closure_bio_submit (bio, &cl);closure_sync (&cl);/* This function could be simpler now since we no longer write @@ -648,7 +648,7 @@ static void journal_write_unlocked(struct closure *cl)spin_unlock (&c->journal.lock);while ((bio =bio_list_pop (&list))) -closure_bio_submit (bio, cl, c->cache[0 ]); +closure_bio_submit (bio, cl);continue_at (cl, journal_write_done,NULL ); }drivers/md/bcache/request.c +8
-8@@ -718,7 +718,7 @@ static void cached_dev_read_error(struct closure *cl)/* XXX: invalidate cache */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }continue_at (cl, cached_dev_cache_miss_done,NULL );@@ -841,7 +841,7 @@ static int cached_dev_cache_miss(struct btree *b, struct search *s, s->cache_miss = miss; s->iop.bio = cache_bio;bio_get (cache_bio); -closure_bio_submit (cache_bio, &s->cl, s->d); +closure_bio_submit (cache_bio, &s->cl);return ret; out_put:@@ -849,7 +849,7 @@ out_put: out_submit: miss->bi_end_io = request_endio; miss->bi_private = &s->cl; -closure_bio_submit (miss, &s->cl, s->d); +closure_bio_submit (miss, &s->cl);return ret; }@@ -914,7 +914,7 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s)if (!(bio->bi_rw &REQ_DISCARD ) ||blk_queue_discard (bdev_get_queue (dc->bdev))) -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }else if (s->iop.writeback) {bch_writeback_add (dc); s->iop.bio = bio;@@ -929,12 +929,12 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s) flush->bi_end_io = request_endio; flush->bi_private = cl; -closure_bio_submit (flush, cl, s->d); +closure_bio_submit (flush, cl); } }else { s->iop.bio =bio_clone_fast (bio,GFP_NOIO , dc->disk.bio_split); -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }closure_call (&s->iop.cl, bch_data_insert,NULL , cl);@@ -950,7 +950,7 @@ static void cached_dev_nodata(struct closure *cl)bch_journal_meta (s->iop.c, cl);/* If it's a flush, we send the flush to the backing device too */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl);continue_at (cl, cached_dev_bio_complete,NULL ); }@@ -994,7 +994,7 @@ static void cached_dev_make_request(struct request_queue *q, struct bio *bio) !blk_queue_discard(bdev_get_queue(dc->bdev)))bio_endio (bio,0 ); else - bch_generic_make_request(bio, &d->bio_split_hook); +generic_make_request (bio ); } }drivers/md/bcache/super.c +2
-30@@ -59,29 +59,6 @@ struct workqueue_struct *bcache_wq;#define BTREE_MAX_PAGES (256 * 1024 / PAGE_SIZE) -static void bio_split_pool_free (struct bio_split_pool *p) -{ -if (p->bio_split_hook) -mempool_destroy (p->bio_split_hook); - -if (p->bio_split) -bioset_free (p->bio_split); -} - -static int bio_split_pool_init (struct bio_split_pool *p) -{ - p->bio_split =bioset_create (4 ,0 ); -if (!p->bio_split) -return -ENOMEM ; - - p->bio_split_hook =mempool_create_kmalloc_pool (4 , -sizeof (struct bio_split_hook )); -if (!p->bio_split_hook) -return -ENOMEM ; - -return 0 ; -} -/* Superblock */ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,@@ -537,7 +514,7 @@ static void prio_io(struct cache *ca, uint64_t bucket, unsigned long rw) bio->bi_private = ca;bch_bio_map (bio, ca->disk_buckets); -closure_bio_submit (bio, &ca->prio, ca); +closure_bio_submit (bio, &ca->prio);closure_sync (cl); }@@ -757,7 +734,6 @@ static void bcache_device_free(struct bcache_device *d)put_disk (d->disk); } -bio_split_pool_free (&d->bio_split_hook);if (d->bio_split)bioset_free (d->bio_split);kvfree (d->full_dirty_stripes);@@ -804,7 +780,6 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size,return minor;if (!(d->bio_split =bioset_create (4 , offsetof(struct bbio , bio))) || -bio_split_pool_init (&d->bio_split_hook) || !(d->disk =alloc_disk (1 ))) {ida_simple_remove (&bcache_minor, minor);return -ENOMEM ;@@ -1793,8 +1768,6 @@ void bch_cache_release(struct kobject *kobj) ca->set->cache[ca->sb.nr_this_dev] =NULL ; } -bio_split_pool_free (&ca->bio_split_hook); -free_pages ((unsigned long ) ca->disk_buckets,ilog2 (bucket_pages (ca)));kfree (ca->prio_buckets);vfree (ca->buckets);@@ -1839,8 +1812,7 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) ca->sb.nbuckets)) || !(ca->prio_buckets =kzalloc (sizeof (uint64_t ) *prio_buckets (ca) *2 ,GFP_KERNEL )) || - !(ca->disk_buckets =alloc_bucket_pages (GFP_KERNEL , ca)) || - bio_split_pool_init(&ca->bio_split_hook)) + !(ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca))) return -ENOMEM; ca->prio_last_buckets = ca->prio_buckets +prio_buckets (ca);drivers/md/bcache/util.h +3
-2@@ -4,6 +4,7 @@#include <linux/blkdev.h> #include <linux/errno.h> +#include <linux/blkdev.h> #include <linux/kernel.h> #include <linux/llist.h> #include <linux/ratelimit.h> @@ -570,10 +571,10 @@ static inline sector_t bdev_sectors(struct block_device *bdev)return bdev->bd_inode->i_size >>9 ; } -#define closure_bio_submit (bio, cl, dev) \ +#define closure_bio_submit (bio, cl) \ do { \ closure_get(cl); \ - bch_generic_make_request(bio, &(dev)->bio_split_hook); \ + generic_make_request(bio); \ } while (0)uint64_t bch_crc64_update (uint64_t ,const void *,size_t );drivers/md/bcache/writeback.c +2
-2@@ -188,7 +188,7 @@ static void write_dirty(struct closure *cl) io->bio.bi_bdev = io->dc->bdev; io->bio.bi_end_io = dirty_endio; -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty_finish, system_wq); }@@ -208,7 +208,7 @@ static void read_dirty_submit(struct closure *cl) { struct dirty_io *io = container_of(cl, struct dirty_io, cl); -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty, system_wq); }Signature · 6 lines
2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-bcache" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: bcache: remove driver private bio splitting code
Hi Vojtěch,
Have you tested the patch below in SLE12-* when bcache is backed by md raid5/6?
FYI: I was compared the drivers/md/bcache/io.c functions in the various branches here:
https://github.com/openSUSE/kernel
I compared the presence of bch_generic_make_request() (which the patch below removes). It looks like the branch SLE12-SP2 has the patch, but version before SLE12-SP2 and openSUSE-* do not (as they still have bch_generic_make_request).
Since the patch does exist in SLE12-SP2, I'm guessing that is been tested, though I am curious if it has been tested specifically when being backed by md raid5/6 so that queue->limits->partial_stripes_expensive is nonzero.
If you have and it is stable, then I want to get it to Kent and Jens for upstream integration.
Thanks!
-Eric
--
Eric Wheeler, President eWheeler, Inc. dba Global Linux Security 888-LINUX26 (888-546-8926) Fax: 503-716-3878 PO Box 25107 www.GlobalLinuxSecurity.pro Linux since 1996! Portland, OR 97298
Quoted 469 lines · Eric Wheeler
Quoted 4 lines
From: Kent Overstreet Wed, 12 Aug 2015 00:07:13 -0700
The bcache driver has always accepted arbitrarily large bios and split them internally. Now that every driver must accept arbitrarily large bios this code isn't nessecary anymore.Hi Kent,
Does your patch below make any kernel version assumptions about bio splitting? That doesn't appear so based on the commit message, but thought I'd double-check.
If there is a kernel dependency, then, how far back should this be safe? I'd like to apply to 3.17-rc1 like the other stable commits and stamp it with Cc: stable@ so it will merge forward into 3.18 and onward if it fixes my problem below:
This question comes up because I'm getting the following (discard-related?) backtrace and would like to try the patch. If it fixes the problem I'll stamp it with stable and get it to Jens. Note that
bch_generic_make_request()doesn't even exist after this patch, so this backtrace would at least be simplified and possibly fixed:[ 294.059255] [<ffffffffa049a20d>] bch_generic_make_request+0x15d/0x1f0 [bcache] [ 294.059578] [<ffffffffa049a3b9>] __bch_submit_bbio+0x79/0x80 [bcache] [ 294.059794] [<ffffffffa049a3eb>] bch_submit_bbio+0x2b/0x30 [bcache] [ 294.059983] [<ffffffffa049fabb>] bch_data_insert_start+0xcb/0x5a0 [bcache] [ 294.060169] [<ffffffffa049ffe1>] bch_data_insert+0x51/0xc0 [bcache] [ 294.060354] [<ffffffffa04a0cc4>] cached_dev_make_request+0xbe4/0xdf0 [bcache] [ 294.060652] [<ffffffff81317c20>] generic_make_request+0xe0/0x130 [ 294.060830] [<ffffffff81317ce7>] submit_bio+0x77/0x150 [ 294.061012] [<ffffffff81312906>] ? bio_alloc_bioset+0x1d6/0x330 [ 294.061194] [<ffffffffa04cef90>] ? le64_dec+0x20/0x20 [dm_persistent_data] [ 294.061377] [<ffffffffa04e49be>] __blkdev_issue_discard_async.constprop.59+0x17e/0x210 [dm_thin_pool] [ 294.061695] [<ffffffffa04e55dc>] process_prepared_discard_passdown+0x9c/0x230 [dm_thin_pool] [ 294.062007] [<ffffffff811ac73f>] ? mempool_free+0x2f/0x90 [ 294.062207] [<ffffffffa04e0772>] process_prepared+0x92/0xc0 [dm_thin_pool] [ 294.062404] [<ffffffffa04e5f78>] do_worker+0xb8/0x880 [dm_thin_pool] [ 294.062606] [<ffffffff81014693>] ? __switch_to+0x1e3/0x580 [ 294.062796] [<ffffffff810dc71c>] ? put_prev_task_fair+0x2c/0x40 [ 294.062989] [<ffffffff810ba18d>] process_one_work+0x14d/0x420 [ 294.063171] [<ffffffff810ba952>] worker_thread+0x112/0x520 [ 294.063355] [<ffffffff810ba840>] ? rescuer_thread+0x3e0/0x3e0 [ 294.063560] [<ffffffff810c06a8>] kthread+0xd8/0xf0 [ 294.063737] [<ffffffff810c05d0>] ? kthread_create_on_node+0x1b0/0x1b0 [ 294.063943] [<ffffffff816e4aa2>] ret_from_fork+0x42/0x70 [ 294.064133] [<ffffffff810c05d0>] ? kthread_create_on_node+0x1b0/0x1b0Thanks!
-Eric
Quoted 412 lines
Signed-off-by Kent Overstreet <[email protected]>[dpark: add more description in commit message]Signed-off-by Dongsu Park <[email protected]>Signed-off-by Ming Lin <[email protected]>--- drivers/md/bcache/bcache.h | 18 -------- drivers/md/bcache/io.c | 101 +----------------------------------------- drivers/md/bcache/journal.c | 4 +- drivers/md/bcache/request.c | 16 +++---- drivers/md/bcache/super.c | 32 +------------ drivers/md/bcache/util.h | 5 ++- drivers/md/bcache/writeback.c | 4 +- 7 files changed, 18 insertions(+), 162 deletions(-)drivers/md/bcache/bcache.h +0
-18@@ -243,19 +243,6 @@ struct keybuf { DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR); }; -struct bio_split_pool { -struct bio_set *bio_split; -mempool_t *bio_split_hook; -}; - -struct bio_split_hook { -struct closure cl; -struct bio_split_pool *p; -struct bio *bio; -bio_end_io_t *bi_end_io; -void *bi_private; -}; -struct bcache_device {struct closure cl;@@ -288,8 +275,6 @@ struct bcache_device {int (*cache_miss)(struct btree *,struct search *,struct bio *,unsigned );int (*ioctl) (struct bcache_device *,fmode_t ,unsigned ,unsigned long ); - -struct bio_split_pool bio_split_hook; };struct io {@@ -454,8 +439,6 @@ struct cache {atomic_long_t meta_sectors_written;atomic_long_t btree_sectors_written;atomic_long_t sectors_written; - -struct bio_split_pool bio_split_hook; };struct gc_stat {@@ -873,7 +856,6 @@ void bch_bbio_endio(struct cache_set *, struct bio *, int, const char *);void bch_bbio_free (struct bio *,struct cache_set *);struct bio *bch_bbio_alloc (struct cache_set *); -void bch_generic_make_request (struct bio *,struct bio_split_pool *);void __bch_submit_bbio (struct bio *,struct cache_set *);void bch_submit_bbio (struct bio *,struct cache_set *,struct bkey *,unsigned );drivers/md/bcache/io.c +1
-100@@ -11,105 +11,6 @@#include <linux/blkdev.h> -static unsigned bch_bio_max_sectors (struct bio *bio) -{ -struct request_queue *q =bdev_get_queue (bio->bi_bdev); -struct bio_vec bv; -struct bvec_iter iter; -unsigned ret =0 , seg =0 ; - -if (bio->bi_rw &REQ_DISCARD ) -return min (bio_sectors (bio), q->limits.max_discard_sectors); - -bio_for_each_segment (bv, bio, iter) { -struct bvec_merge_data bvm = { - .bi_bdev = bio->bi_bdev, - .bi_sector = bio->bi_iter.bi_sector, - .bi_size = ret <<9 , - .bi_rw = bio->bi_rw, - }; - -if (seg ==min_t (unsigned,BIO_MAX_PAGES , -queue_max_segments (q))) -break ; - -if (q->merge_bvec_fn && - q->merge_bvec_fn (q, &bvm, &bv) < (int ) bv.bv_len) -break ; - - seg++; - ret += bv.bv_len >>9 ; - } - - ret =min (ret,queue_max_sectors (q)); - -WARN_ON (!ret); - ret =max_t (int, ret,bio_iovec (bio).bv_len >>9 ); - -return ret; -} - -static void bch_bio_submit_split_done (struct closure *cl) -{ - struct bio_split_hook *s = container_of(cl, struct bio_split_hook, cl); - - s->bio->bi_end_io = s->bi_end_io; - s->bio->bi_private = s->bi_private; -bio_endio (s->bio,0 ); - -closure_debug_destroy (&s->cl); -mempool_free (s, s->p->bio_split_hook); -} - -static void bch_bio_submit_split_endio (struct bio *bio,int error) -{ -struct closure *cl = bio->bi_private; - struct bio_split_hook *s = container_of(cl, struct bio_split_hook, cl); - -if (error) -clear_bit (BIO_UPTODATE , &s->bio->bi_flags); - -bio_put (bio); -closure_put (cl); -} - -void bch_generic_make_request (struct bio *bio,struct bio_split_pool *p) -{ -struct bio_split_hook *s; -struct bio *n; - -if (!bio_has_data (bio) && !(bio->bi_rw &REQ_DISCARD )) - goto submit; - -if (bio_sectors (bio) <=bch_bio_max_sectors (bio)) - goto submit; - - s =mempool_alloc (p->bio_split_hook,GFP_NOIO ); -closure_init (&s->cl,NULL ); - - s->bio = bio; - s->p = p; - s->bi_end_io = bio->bi_end_io; - s->bi_private = bio->bi_private; -bio_get (bio); - -do { - n =bio_next_split (bio,bch_bio_max_sectors (bio), -GFP_NOIO , s->p->bio_split); - - n->bi_end_io = bch_bio_submit_split_endio; - n->bi_private = &s->cl; - -closure_get (&s->cl); -generic_make_request (n); - }while (n != bio); - -continue_at (&s->cl, bch_bio_submit_split_done,NULL ); -return ; -submit: -generic_make_request (bio); -} -/* Bios with headers */ void bch_bbio_free (struct bio *bio,struct cache_set *c)@@ -139,7 +40,7 @@ void __bch_submit_bbio(struct bio *bio, struct cache_set *c) bio->bi_bdev =PTR_CACHE (c, &b->key,0 )->bdev; b->submit_time_us =local_clock_us (); -closure_bio_submit (bio, bio->bi_private,PTR_CACHE (c, &b->key,0 )); +closure_bio_submit (bio, bio->bi_private); } void bch_submit_bbio(struct bio *bio, struct cache_set *c,drivers/md/bcache/journal.c +2
-2@@ -61,7 +61,7 @@ reread: left = ca->sb.bucket_size - offset; bio->bi_private = &cl;bch_bio_map (bio, data); -closure_bio_submit (bio, &cl, ca); +closure_bio_submit (bio, &cl);closure_sync (&cl);/* This function could be simpler now since we no longer write @@ -648,7 +648,7 @@ static void journal_write_unlocked(struct closure *cl)spin_unlock (&c->journal.lock);while ((bio =bio_list_pop (&list))) -closure_bio_submit (bio, cl, c->cache[0 ]); +closure_bio_submit (bio, cl);continue_at (cl, journal_write_done,NULL ); }drivers/md/bcache/request.c +8
-8@@ -718,7 +718,7 @@ static void cached_dev_read_error(struct closure *cl)/* XXX: invalidate cache */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }continue_at (cl, cached_dev_cache_miss_done,NULL );@@ -841,7 +841,7 @@ static int cached_dev_cache_miss(struct btree *b, struct search *s, s->cache_miss = miss; s->iop.bio = cache_bio;bio_get (cache_bio); -closure_bio_submit (cache_bio, &s->cl, s->d); +closure_bio_submit (cache_bio, &s->cl);return ret; out_put:@@ -849,7 +849,7 @@ out_put: out_submit: miss->bi_end_io = request_endio; miss->bi_private = &s->cl; -closure_bio_submit (miss, &s->cl, s->d); +closure_bio_submit (miss, &s->cl);return ret; }@@ -914,7 +914,7 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s)if (!(bio->bi_rw &REQ_DISCARD ) ||blk_queue_discard (bdev_get_queue (dc->bdev))) -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }else if (s->iop.writeback) {bch_writeback_add (dc); s->iop.bio = bio;@@ -929,12 +929,12 @@ static void cached_dev_write(struct cached_dev *dc, struct search *s) flush->bi_end_io = request_endio; flush->bi_private = cl; -closure_bio_submit (flush, cl, s->d); +closure_bio_submit (flush, cl); } }else { s->iop.bio =bio_clone_fast (bio,GFP_NOIO , dc->disk.bio_split); -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl); }closure_call (&s->iop.cl, bch_data_insert,NULL , cl);@@ -950,7 +950,7 @@ static void cached_dev_nodata(struct closure *cl)bch_journal_meta (s->iop.c, cl);/* If it's a flush, we send the flush to the backing device too */ -closure_bio_submit (bio, cl, s->d); +closure_bio_submit (bio, cl);continue_at (cl, cached_dev_bio_complete,NULL ); }@@ -994,7 +994,7 @@ static void cached_dev_make_request(struct request_queue *q, struct bio *bio) !blk_queue_discard(bdev_get_queue(dc->bdev)))bio_endio (bio,0 ); else - bch_generic_make_request(bio, &d->bio_split_hook); +generic_make_request (bio ); } }drivers/md/bcache/super.c +2
-30@@ -59,29 +59,6 @@ struct workqueue_struct *bcache_wq;#define BTREE_MAX_PAGES (256 * 1024 / PAGE_SIZE) -static void bio_split_pool_free (struct bio_split_pool *p) -{ -if (p->bio_split_hook) -mempool_destroy (p->bio_split_hook); - -if (p->bio_split) -bioset_free (p->bio_split); -} - -static int bio_split_pool_init (struct bio_split_pool *p) -{ - p->bio_split =bioset_create (4 ,0 ); -if (!p->bio_split) -return -ENOMEM ; - - p->bio_split_hook =mempool_create_kmalloc_pool (4 , -sizeof (struct bio_split_hook )); -if (!p->bio_split_hook) -return -ENOMEM ; - -return 0 ; -} -/* Superblock */ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,@@ -537,7 +514,7 @@ static void prio_io(struct cache *ca, uint64_t bucket, unsigned long rw) bio->bi_private = ca;bch_bio_map (bio, ca->disk_buckets); -closure_bio_submit (bio, &ca->prio, ca); +closure_bio_submit (bio, &ca->prio);closure_sync (cl); }@@ -757,7 +734,6 @@ static void bcache_device_free(struct bcache_device *d)put_disk (d->disk); } -bio_split_pool_free (&d->bio_split_hook);if (d->bio_split)bioset_free (d->bio_split);kvfree (d->full_dirty_stripes);@@ -804,7 +780,6 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size,return minor;if (!(d->bio_split =bioset_create (4 , offsetof(struct bbio , bio))) || -bio_split_pool_init (&d->bio_split_hook) || !(d->disk =alloc_disk (1 ))) {ida_simple_remove (&bcache_minor, minor);return -ENOMEM ;@@ -1793,8 +1768,6 @@ void bch_cache_release(struct kobject *kobj) ca->set->cache[ca->sb.nr_this_dev] =NULL ; } -bio_split_pool_free (&ca->bio_split_hook); -free_pages ((unsigned long ) ca->disk_buckets,ilog2 (bucket_pages (ca)));kfree (ca->prio_buckets);vfree (ca->buckets);@@ -1839,8 +1812,7 @@ static int cache_alloc(struct cache_sb *sb, struct cache *ca) ca->sb.nbuckets)) || !(ca->prio_buckets =kzalloc (sizeof (uint64_t ) *prio_buckets (ca) *2 ,GFP_KERNEL )) || - !(ca->disk_buckets =alloc_bucket_pages (GFP_KERNEL , ca)) || - bio_split_pool_init(&ca->bio_split_hook)) + !(ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca))) return -ENOMEM; ca->prio_last_buckets = ca->prio_buckets +prio_buckets (ca);drivers/md/bcache/util.h +3
-2@@ -4,6 +4,7 @@#include <linux/blkdev.h> #include <linux/errno.h> +#include <linux/blkdev.h> #include <linux/kernel.h> #include <linux/llist.h> #include <linux/ratelimit.h> @@ -570,10 +571,10 @@ static inline sector_t bdev_sectors(struct block_device *bdev)return bdev->bd_inode->i_size >>9 ; } -#define closure_bio_submit (bio, cl, dev) \ +#define closure_bio_submit (bio, cl) \ do { \ closure_get(cl); \ - bch_generic_make_request(bio, &(dev)->bio_split_hook); \ + generic_make_request(bio); \ } while (0)uint64_t bch_crc64_update (uint64_t ,const void *,size_t );drivers/md/bcache/writeback.c +2
-2@@ -188,7 +188,7 @@ static void write_dirty(struct closure *cl) io->bio.bi_bdev = io->dc->bdev; io->bio.bi_end_io = dirty_endio; -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty_finish, system_wq); }@@ -208,7 +208,7 @@ static void read_dirty_submit(struct closure *cl) { struct dirty_io *io = container_of(cl, struct dirty_io, cl); -closure_bio_submit (&io->bio, cl, &io->dc->disk); +closure_bio_submit (&io->bio, cl);continue_at (cl, write_dirty, system_wq); }Signature · 6 lines
2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-bcache" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: bcache: remove driver private bio splitting code
On Tue, Jan 12, 2016 at 06:00:49PM -0800, Eric Wheeler wrote:
Hello Eric,
Quoted 11 lines
Have you tested the patch below in SLE12-* when bcache is backed by md raid5/6?
FYI: I was compared the
drivers/md/bcache/io.cfunctions in the various branches here:
https://github.com/openSUSE/kernel
I compared the presence ofbch_generic_make_request()(which the patch below removes). It looks like the branch SLE12-SP2 has the patch, but version before SLE12-SP2 and openSUSE-* do not (as they still havebch_generic_make_request).
Quoted 6 lines
Since the patch does exist in SLE12-SP2, I'm guessing that is been tested, though I am curious if it has been tested specifically when being backed by md raid5/6 so that
queue->limits->partial_stripes_expensiveis nonzero.If you have and it is stable, then I want to get it to Kent and Jens for upstream integration.
The SLES12-SP2 kernel branch is very fresh, created this week. So while the patch was tested by Johannes before adding it, and by our per-commit automated tests, it didn't go through fully qualified QA test cycle yet. So I won't say it's proven stable just yet.
Signature · 2 lines
Vojtech Pavlik Director SUSE Labs
Re: bcache: remove driver private bio splitting code
Quoted 19 lines · Eric Wheeler
Hello Eric,
Quoted 15 lines
Have you tested the patch below in SLE12-* when bcache is backed by md raid5/6?
FYI: I was compared the
drivers/md/bcache/io.cfunctions in the various branches here:
https://github.com/openSUSE/kernel
I compared the presence ofbch_generic_make_request()(which the patch below removes). It looks like the branch SLE12-SP2 has the patch, but version before SLE12-SP2 and openSUSE-* do not (as they still havebch_generic_make_request).Since the patch does exist in SLE12-SP2, I'm guessing that is been tested, though I am curious if it has been tested specifically when being backed by md raid5/6 so that
queue->limits->partial_stripes_expensiveis nonzero.
Quoted 7 lines
Quoted 2 lines
If you have and it is stable, then I want to get it to Kent and Jens for upstream integration.
The SLES12-SP2 kernel branch is very fresh, created this week. So while the patch was tested by Johannes before adding it, and by our per-commit automated tests, it didn't go through fully qualified QA test cycle yet. So I won't say it's proven stable just yet.
Good to know, thank you for that!
I encourage you to include md-based raid5/6 backed bcache volumes in your testing if it is not already. This particular patch may affect that use case. Please keep us posted, I look forward to learning about the bcache-specific test cycle results.
-Eric
Quoted 9 lines
Signature · 7 lines
-- Vojtech Pavlik Director SUSE Labs -- To unsubscribe from this list: send the line "unsubscribe linux-bcache" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v6 4/11 btrfs: remove bio splitting and merge_bvec_fn() calls
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
Btrfs has been doing bio splitting from btrfs_map_bio(), by checking device limits as well as calling ->merge_bvec_fn() etc. That is not necessary any more, because generic_make_request() is now able to handle arbitrarily sized bios. So clean up unnecessary code paths.
--- fs/btrfs/volumes.c | 72 ------------------------------------------------------ 1 file changed, 72 deletions(-)
fs/btrfs/volumes.c +0 -72
@@ -5871,34 +5871,6 @@ static noinline void btrfs_schedule_bio(struct btrfs_root *root, &device->work); } -static int bio_size_ok (struct block_device *bdev,struct bio *bio, -sector_t sector) -{ -struct bio_vec *prev; -struct request_queue *q =bdev_get_queue (bdev); -unsigned int max_sectors =queue_max_sectors (q); -struct bvec_merge_data bvm = { - .bi_bdev = bdev, - .bi_sector = sector, - .bi_rw = bio->bi_rw, - }; - -if (WARN_ON (bio->bi_vcnt ==0 )) -return 1 ; - - prev = &bio->bi_io_vec[bio->bi_vcnt -1 ]; -if (bio_sectors (bio) > max_sectors) -return 0 ; - -if (!q->merge_bvec_fn) -return 1 ; - - bvm.bi_size = bio->bi_iter.bi_size - prev->bv_len; -if (q->merge_bvec_fn (q, &bvm, prev) < prev->bv_len) -return 0 ; -return 1 ; -} -static void submit_stripe_bio (struct btrfs_root *root,struct btrfs_bio *bbio,struct bio *bio,u64 physical,int dev_nr,int rw,int async)
@@ -5932,38 +5904,6 @@ static void submit_stripe_bio(struct btrfs_root *root, struct btrfs_bio *bbio,btrfsic_submit_bio (rw, bio); } -static int breakup_stripe_bio (struct btrfs_root *root,struct btrfs_bio *bbio, -struct bio *first_bio,struct btrfs_device *dev, -int dev_nr,int rw,int async) -{ -struct bio_vec *bvec = first_bio->bi_io_vec; -struct bio *bio; -int nr_vecs =bio_get_nr_vecs (dev->bdev); -u64 physical = bbio->stripes[dev_nr].physical; - -again: - bio =btrfs_bio_alloc (dev->bdev, physical >>9 , nr_vecs,GFP_NOFS ); -if (!bio) -return -ENOMEM ; - -while (bvec <= (first_bio->bi_io_vec + first_bio->bi_vcnt -1 )) { -if (bio_add_page (bio, bvec->bv_page, bvec->bv_len, - bvec->bv_offset) < bvec->bv_len) { -u64 len = bio->bi_iter.bi_size; - -atomic_inc (&bbio->stripes_pending); -submit_stripe_bio (root, bbio, bio, physical, dev_nr, - rw, async); - physical += len; - goto again; - } - bvec++; - } - -submit_stripe_bio (root, bbio, bio, physical, dev_nr, rw, async); -return 0 ; -} -static void bbio_error (struct btrfs_bio *bbio,struct bio *bio,u64 logical) {atomic_inc (&bbio->error);
@@ -6036,18 +5976,6 @@ int btrfs_map_bio(struct btrfs_root *root, int rw, struct bio *bio,continue ; } -/* -* Check and see if we're ok with this bio based on it's size -* and offset with the given device. -*/ -if (!bio_size_ok (dev->bdev, first_bio, - bbio->stripes[dev_nr].physical >>9 )) { - ret =breakup_stripe_bio (root, bbio, first_bio, dev, - dev_nr, rw, async_submit); -BUG_ON (ret); -continue ; - } -if (dev_nr < total_devs -1 ) { bio =btrfs_bio_clone (first_bio,GFP_NOFS );BUG_ON (!bio);/* -ENOMEM */
Signature · 1 line
2.1.4
PATCH v6 5/11 block: remove split code in blkdev_issue_{discard,write_same}
In reply to Ming LinFrom: Ming Lin <[email protected]>
The split code in blkdev_issue_{discard,write_same} can go away now that any driver that cares does the split. We have to make sure bio size doesn't overflow.
For discard, we set max discard sectors to (1<<31)>>9 to ensure it doesn't overflow bi_size and hopefully it is of the proper granularity as long as the granularity is a power of two.
--- block/blk-lib.c | 47 +++++++++++------------------------------------ 1 file changed, 11 insertions(+), 36 deletions(-)
block/blk-lib.c +11 -36
@@ -26,6 +26,13 @@ static void bio_batch_end_io(struct bio *bio, int err)bio_put (bio); } +/* +* Ensure that max discard sectors doesn't overflow bi_size and hopefully +* it is of the proper granularity as long as the granularity is a power +* of two. +*/ +#define MAX_BIO_SECTORS ((1U << 31) >> 9) +/** * blkdev_issue_discard - queue a discard * @bdev: blockdev to issue discard for
@@ -43,8 +50,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,DECLARE_COMPLETION_ONSTACK (wait);struct request_queue *q =bdev_get_queue (bdev);int type =REQ_WRITE |REQ_DISCARD ; -unsigned int max_discard_sectors, granularity; -int alignment;struct bio_batch bb;struct bio *bio;int ret =0 ;
@@ -56,21 +61,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,if (!blk_queue_discard (q))return -EOPNOTSUPP ; -/* Zero-sector (unknown) and one-sector granularities are the same. */ - granularity =max (q->limits.discard_granularity >>9 ,1U ); - alignment = (bdev_discard_alignment (bdev) >>9 ) % granularity; - -/* -* Ensure that max_discard_sectors is of the proper -* granularity, so that requests stay aligned after a split. -*/ - max_discard_sectors =min (q->limits.max_discard_sectors,UINT_MAX >>9 ); - max_discard_sectors -= max_discard_sectors % granularity; -if (unlikely (!max_discard_sectors)) { -/* Avoid infinite loop below. Being cautious never hurts. */ -return -EOPNOTSUPP ; - } -if (flags &BLKDEV_DISCARD_SECURE ) {if (!blk_queue_secdiscard (q))return -EOPNOTSUPP ;
@@ -84,7 +74,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,blk_start_plug (&plug);while (nr_sects) {unsigned int req_sects; -sector_t end_sect, tmp; +sector_t end_sect; bio =bio_alloc (gfp_mask,1 );if (!bio) {
@@ -92,21 +82,8 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects, max_discard_sectors); - -/* -* If splitting a request, and the next starting sector would be -* misaligned, stop the discard at the previous aligned sector. -*/ + req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); end_sect = sector + req_sects; - tmp = end_sect; -if (req_sects < nr_sects && -sector_div (tmp, granularity) != alignment) { - end_sect = end_sect - alignment; -sector_div (end_sect, granularity); - end_sect = end_sect * granularity + alignment; - req_sects = end_sect - sector; - } bio->bi_iter.bi_sector = sector; bio->bi_end_io = bio_batch_end_io;
@@ -166,10 +143,8 @@ int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,if (!q)return -ENXIO ; - max_write_same_sectors = q->limits.max_write_same_sectors; - -if (max_write_same_sectors ==0 ) -return -EOPNOTSUPP ; +/* Ensure that max_write_same_sectors doesn't overflow bi_size */ + max_write_same_sectors =UINT_MAX >>9 ;atomic_set (&bb.done,1 ); bb.flags =1 <<BIO_UPTODATE ;
Signature · 1 line
2.1.4
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 9 lines · Ming Lin
From: Ming Lin <ming.l at ssi.samsung.com>
The split code in blkdev_issue_{discard,write_same} can go away now that any driver that cares does the split. We have to make sure bio size doesn't overflow.
For discard, we set max discard sectors to (1<<31)>>9 to ensure it doesn't overflow
bi_sizeand hopefully it is of the proper granularity as long as the granularity is a power of two.
This ends up breaking discard on NVMe devices for a me. An mkfs.xfs which does a discard of the whole device now hangs the system. Something in here makes it send discard command that the device doesn't like and the aborts don't seem to help either, although that might be an issue with the abort handling in the driver.
Just a heads up for now, once I get a bit more time I'll try to collect a blktrace to figure out how the commands sent to the driver look different before and after the patch.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 17 lines · Christoph Hellwig
Quoted 9 lines · Ming Lin
From: Ming Lin <ming.l at ssi.samsung.com>
The split code in blkdev_issue_{discard,write_same} can go away now that any driver that cares does the split. We have to make sure bio size doesn't overflow.
For discard, we set max discard sectors to (1<<31)>>9 to ensure it doesn't overflow
bi_sizeand hopefully it is of the proper granularity as long as the granularity is a power of two.This ends up breaking discard on NVMe devices for a me. An mkfs.xfs which does a discard of the whole device now hangs the system. Something in here makes it send discard command that the device doesn't like and the aborts don't seem to help either, although that might be an issue with the abort handling in the driver.
Quoted 3 lines
Just a heads up for now, once I get a bit more time I'll try to collect a blktrace to figure out how the commands sent to the driver look different before and after the patch.
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H]
.. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]
So discards are smaller, but better aligned. Now if I tweak a single line in blk-lib.c to be able to use all of bi_size I get the old I/O pattern back and everything works fine again:
block/blk-lib.c +1 -1
@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects; bio->bi_iter.bi_sector = sector;
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}B
Quoted 25 lines · Christoph Hellwig
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]
Quoted 3 lines
So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:
I see why the proposal is an improvement, but I don't understand why the current situation results in a hang. Are we missing some kind of error recovery in the driver?
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}B
Quoted 3 lines · Keith Busch
I see why the proposal is an improvement, but I don't understand why the current situation results in a hang. Are we missing some kind of error recovery in the driver?
The driver tries to abort the commands and eventually gets into a death spiral. I'm still trying to understand what exactly is going on.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
In reply to Christoph HellwigQuoted 42 lines · Christoph Hellwig
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:block/blk-lib.c +0
-0
block/blk-lib.c int blkdev_issue_discard(struct block_device *bdev, sector_t sector, · line 88
Quoted 8 lines
block/blk-lib.c +1
-1@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects; bio->bi_iter.bi_sector = sector;
Can we change UINT_MAX >> 9 to rounddown to the first factor of minimum_io_size?
That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Mike
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 52 lines · Mike Snitzer
Quoted 49 lines · Christoph Hellwig
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:block/blk-lib.c +1
-1@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects;
Quoted 8 lines
block/blk-lib.c int blkdev_issue_discard(struct block_device *bdev, sector_t sector, · line 88
Quoted 1 line
block/blk-lib.c +0
-0bio->bi_iter.bi_sector = sector;Can we change
UINT_MAX>> 9 to rounddown to the first factor ofminimum_io_size?That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Jeff Moyer pointed out having req_sects be a factor of discard_granularity makes more sense. And I agree. Same difference in the end (since dm-thinp sets discard_granularity to the thinp blocksize).
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mike" == Mike Snitzer <snitzer at redhat.com> writes:
That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Mike> Jeff Moyer pointed out having req_sects be a factor of Mike> discard_granularity makes more sense.
Absolutely!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
In reply to Mike SnitzerQuoted 60 lines · Mike Snitzer
Quoted 57 lines · Mike Snitzer
Quoted 42 lines · Christoph Hellwig
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:block/blk-lib.c +0
-0block/blk-lib.c int blkdev_issue_discard(struct block_device *bdev, sector_t sector, · line 88
Quoted 8 lines
block/blk-lib.c +1
-1@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects; bio->bi_iter.bi_sector = sector;Can we change
UINT_MAX>> 9 to rounddown to the first factor ofminimum_io_size?
Quoted 8 lines
Quoted 3 lines
That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Jeff Moyer pointed out having
req_sectsbe a factor ofdiscard_granularitymakes more sense. And I agree. Same difference in the end (since dm-thinp setsdiscard_granularityto the thinp blocksize).
An old version of this patch did use discard_granularity
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.html
But you didn't agree.
https://www.redhat.com/archives/dm-devel/2015-August/msg00001.html
Maybe we can re-add discard_granularity now?
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 70 lines · Ming Lin
Quoted 60 lines · Mike Snitzer
Quoted 57 lines · Mike Snitzer
Quoted 42 lines · Christoph Hellwig
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:block/blk-lib.c +0
-0block/blk-lib.c int blkdev_issue_discard(struct block_device *bdev, sector_t sector, · line 88
Quoted 8 lines
block/blk-lib.c +1
-1@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects; bio->bi_iter.bi_sector = sector;Can we change
UINT_MAX>> 9 to rounddown to the first factor ofminimum_io_size?Quoted 8 lines
Quoted 3 lines
That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Jeff Moyer pointed out having
req_sectsbe a factor ofdiscard_granularitymakes more sense. And I agree. Same difference in the end (since dm-thinp setsdiscard_granularityto the thinp blocksize).
Quoted 7 lines
An old version of this patch did use
discard_granularity
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.htmlBut you didn't agree.
https://www.redhat.com/archives/dm-devel/2015-August/msg00001.htmlMaybe we can re-add
discard_granularitynow?
I disagreed on a more generic level than discard_granularity shaping the split boundary.
But we are where we are. If we're going to split (due to 32-bit limits in bio->bi_iter.bi_size) then we should at least do so in terms of the support discard_granularity.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 79 lines · Mike Snitzer
Quoted 76 lines · Ming Lin
Quoted 60 lines · Mike Snitzer
Quoted 57 lines · Mike Snitzer
Quoted 42 lines · Christoph Hellwig
Quoted 4 lines · Ming Lin
I just did a quick test with a Samsung 900G NVMe device. mkfs.xfs is OK on 4.3-rc5.
What's your device model? I may find a similar one to try.
This is a HGST Ultrastar SN100
Analsys and tentativ fix below:
blktrace for before the commit:
259,0 1 2 0.000002543 2394 G D 0 + 8388607 [mkfs.xfs] 259,0 1 3 0.000008230 2394 I D 0 + 8388607 [mkfs.xfs] 259,0 1 4 0.000031090 207 D D 0 + 8388607 [kworker/1:1H] 259,0 1 5 0.000044869 2394 Q D 8388607 + 8388607 [mkfs.xfs] 259,0 1 6 0.000045992 2394 G D 8388607 + 8388607 [mkfs.xfs] 259,0 1 7 0.000049559 2394 I D 8388607 + 8388607 [mkfs.xfs] 259,0 1 8 0.000061551 207 D D 8388607 + 8388607 [kworker/1:1H].. and so on.
blktrace with the commit:
259,0 2 1 0.000000000 1228 Q D 0 + 4194304 [mkfs.xfs] 259,0 2 2 0.000002543 1228 G D 0 + 4194304 [mkfs.xfs] 259,0 2 3 0.000010080 1228 I D 0 + 4194304 [mkfs.xfs] 259,0 2 4 0.000082187 267 D D 0 + 4194304 [kworker/2:1H] 259,0 2 5 0.000224869 1228 Q D 4194304 + 4194304 [mkfs.xfs] 259,0 2 6 0.000225835 1228 G D 4194304 + 4194304 [mkfs.xfs] 259,0 2 7 0.000229457 1228 I D 4194304 + 4194304 [mkfs.xfs] 259,0 2 8 0.000238507 267 D D 4194304 + 4194304 [kworker/2:1H]So discards are smaller, but better aligned. Now if I tweak a single line in
blk-lib.cto be able to use all ofbi_sizeI get the old I/O pattern back and everything works fine again:block/blk-lib.c +0
-0block/blk-lib.c int blkdev_issue_discard(struct block_device *bdev, sector_t sector, · line 88
Quoted 8 lines
block/blk-lib.c +1
-1@@ -82,7 +82,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); end_sect = sector + req_sects; bio->bi_iter.bi_sector = sector;Can we change
UINT_MAX>> 9 to rounddown to the first factor ofminimum_io_size?Quoted 8 lines
Quoted 3 lines
That should work for all devices and for dm-thinp (and dm-cache) in particular will ensure that all discards that are issued will be a multiple of the underlying device's blocksize.
Jeff Moyer pointed out having
req_sectsbe a factor ofdiscard_granularitymakes more sense. And I agree. Same difference in the end (since dm-thinp setsdiscard_granularityto the thinp blocksize).An old version of this patch did use
discard_granularity
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.htmlBut you didn't agree.
https://www.redhat.com/archives/dm-devel/2015-August/msg00001.html
Quoted 8 lines
Quoted 1 line
Maybe we can re-add
discard_granularitynow?I disagreed on a more generic level than
discard_granularityshaping the split boundary.But we are where we are. If we're going to split (due to 32-bit limits in
bio->bi_iter.bi_size) then we should at least do so in terms of the supportdiscard_granularity.
How about below?
It actually reverts commit b49a0871 and adds patch at
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.html
Christoph, could you help to try it?
commit 122bf0a43cb1611ed62aaf945f25b649c27a71ed
Author: Ming Lin <mlin at kernel.org> Date: Wed Oct 21 11:24:48 2015 -0700
block: check discard_granularity and alignment
--- block/blk-lib.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
block/blk-lib.c +22 -9
@@ -26,13 +26,6 @@ static void bio_batch_end_io(struct bio *bio)bio_put (bio); } -/* -* Ensure that max discard sectors doesn't overflow bi_size and hopefully -* it is of the proper granularity as long as the granularity is a power -* of two. -*/ -#define MAX_BIO_SECTORS ((1U << 31) >> 9) -/** * blkdev_issue_discard - queue a discard * @bdev: blockdev to issue discard for
@@ -50,6 +43,8 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,DECLARE_COMPLETION_ONSTACK (wait);struct request_queue *q =bdev_get_queue (bdev);int type =REQ_WRITE |REQ_DISCARD ; +unsigned int granularity; +int alignment;struct bio_batch bb;struct bio *bio;int ret =0 ;
@@ -61,6 +56,10 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,if (!blk_queue_discard (q))return -EOPNOTSUPP ; +/* Zero-sector (unknown) and one-sector granularities are the same. */ + granularity =max (q->limits.discard_granularity >>9 ,1U ); + alignment = (bdev_discard_alignment (bdev) >>9 ) % granularity; +if (flags &BLKDEV_DISCARD_SECURE ) {if (!blk_queue_secdiscard (q))return -EOPNOTSUPP ;
@@ -74,7 +73,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,blk_start_plug (&plug);while (nr_sects) {unsigned int req_sects; -sector_t end_sect; +sector_t end_sect, tmp; bio =bio_alloc (gfp_mask,1 );if (!bio) {
@@ -82,8 +81,22 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,break ; } - req_sects =min_t (sector_t, nr_sects,MAX_BIO_SECTORS ); +/* Make sure bi_size doesn't overflow */ + req_sects =min_t (sector_t, nr_sects,UINT_MAX >>9 ); + +/* +* If splitting a request, and the next starting sector would be +* misaligned, stop the discard at the previous aligned sector. +*/ end_sect = sector + req_sects; + tmp = end_sect; +if (req_sects < nr_sects && +sector_div (tmp, granularity) != alignment) { + end_sect = end_sect - alignment; +sector_div (end_sect, granularity); + end_sect = end_sect * granularity + alignment; + req_sects = end_sect - sector; + } bio->bi_iter.bi_sector = sector; bio->bi_end_io = bio_batch_end_io;
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 5 lines · Ming Lin
How about below?
It actually reverts commitb49a0871and adds patch at
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.htmlChristoph, could you help to try it?
Still causes hickups with my controller unfortunately.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 7 lines · Christoph Hellwig
Quoted 5 lines
How about below?
It actually reverts commitb49a0871and adds patch at
https://www.redhat.com/archives/dm-devel/2015-August/msg00000.htmlChristoph, could you help to try it?
Still causes hickups with my controller unfortunately.
Turns out I booted into the wrong kernel. This actually works fine now thay I've actually tested the right code:
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
In reply to Ming LinJens, Ming:
are you fine with the one liner change to get back to the old I/O pattern? While it looks like the cards fault I'd like to avoid this annoying regression.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 5 lines · Christoph Hellwig
Jens, Ming:
are you fine with the one liner change to get back to the old I/O pattern? While it looks like the cards fault I'd like to avoid this annoying regression.
I'm not Jens or Ming, but your patch looks fine to me, though you'll want to remove the MAX_BIO_SECTORS definition since it's now unused. It's not clear to me why the limit was lowered in the first place.
You can add my Reviewed-by: Jeff Moyer <jmoyer at redhat.com> if you resend the patch.
-Jeff
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 11 lines · Jeff Moyer
Quoted 5 lines · Christoph Hellwig
Jens, Ming:
are you fine with the one liner change to get back to the old I/O pattern? While it looks like the cards fault I'd like to avoid this annoying regression.
I'm not Jens or Ming, but your patch looks fine to me, though you'll want to remove the
MAX_BIO_SECTORSdefinition since it's now unused. It's not clear to me why the limit was lowered in the first place.
UINT_MAX >> 9 is not power of 2 and it causes dm-thinp discard fails.
At the lengthy discussion:
[PATCH v5 01/11] block: make generic_make_request handle arbitrarily sized bios We agreed to cap discard to 2G as an interim solution for 4.3 until the dm-thinp discard code is rewritten.
Hi Mike,
Will the dm-thinp discard rewritten ready for 4.4?
Thanks,
Ming
Quoted 5 lines
You can add my Reviewed-by: Jeff Moyer <jmoyer at redhat.com> if you resend the patch.
-Jeff
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 13 lines · Ming Lin
Quoted 11 lines · Jeff Moyer
Quoted 5 lines · Christoph Hellwig
Jens, Ming:
are you fine with the one liner change to get back to the old I/O pattern? While it looks like the cards fault I'd like to avoid this annoying regression.
I'm not Jens or Ming, but your patch looks fine to me, though you'll want to remove the
MAX_BIO_SECTORSdefinition since it's now unused. It's not clear to me why the limit was lowered in the first place.
Quoted 6 lines
UINT_MAX>> 9 is not power of 2 and it causes dm-thinp discard fails.At the lengthy discussion:
[PATCH v5 01/11] block: makegeneric_make_requesthandle arbitrarily sized bios We agreed to cap discard to 2G as an interim solution for 4.3 until the dm-thinp discard code is rewritten.
But did Jens ever commit that change to cap at 2G? I don't recall seeing it.
Quoted 3 lines
Hi Mike,
Will the dm-thinp discard rewritten ready for 4.4?
No. I'm not clear what needs changing in dm-thinp. I'll have to revisit the thread to refresh my memory.
BTW, DM thinp can easily handle discards that aren't a power-of-2 so long as the requested discard is a factor of the thinp blocksize.
Re: [PATCH v6 05/11] block: remove split code in blkdev_issue_{discard,write_same}
Quoted 18 lines · Mike Snitzer
Quoted 15 lines · Ming Lin
Quoted 11 lines · Jeff Moyer
Quoted 5 lines · Christoph Hellwig
Jens, Ming:
are you fine with the one liner change to get back to the old I/O pattern? While it looks like the cards fault I'd like to avoid this annoying regression.
I'm not Jens or Ming, but your patch looks fine to me, though you'll want to remove the
MAX_BIO_SECTORSdefinition since it's now unused. It's not clear to me why the limit was lowered in the first place.
UINT_MAX>> 9 is not power of 2 and it causes dm-thinp discard fails.
Quoted 7 lines
Quoted 4 lines
At the lengthy discussion:
[PATCH v5 01/11] block: makegeneric_make_requesthandle arbitrarily sized bios We agreed to cap discard to 2G as an interim solution for 4.3 until the dm-thinp discard code is rewritten.But did Jens ever commit that change to cap at 2G? I don't recall seeing it.
Yes, commit b49a0871
Quoted 10 lines
Quoted 4 lines
Hi Mike,
Will the dm-thinp discard rewritten ready for 4.4?
No. I'm not clear what needs changing in dm-thinp. I'll have to revisit the thread to refresh my memory.
BTW, DM thinp can easily handle discards that aren't a power-of-2 so long as the requested discard is a factor of the thinp blocksize.
You are right. It's not about power-of-2.
Copy my old post here about why dm-thinp discard may fail with "UINT_MAX
Quoted 1 line
Quoted 1 line
9".
4G: 8388608 sectors
UINT_MAX: 8388607 sectors
dm-thinp block size = default discard granularity = 128 sectors
blkdev_issue_discard(sector=0, nr_sectors=8388608)
[start_sector, end_sector]
[0, 8388607]
[0, 8388606], then dm-thinp splits it to 2 bios
[0, 8388479]
[8388480, 8388606] ---> this has problem in process_discard_bio(),
because the discard size(7 sectors) covers less than a block(128 sectors)
[8388607, 8388607] ---> same problem PATCH v6 6/11 md/raid5: split bio for chunk_aligned_read
In reply to Ming LinFrom: Ming Lin <[email protected]>
If a read request fits entirely in a chunk, it will be passed directly to the underlying device (providing it hasn't failed of course). If it doesn't fit, the slightly less efficient path that uses the stripe_cache is used. Requests that get to the stripe cache are always completely split up as necessary.
So with RAID5, ripping out the merge_bvec_fn doesn't cause it to stop work, but could cause it to take the less efficient path more often.
All that is needed to manage this is for 'chunk_aligned_read' do some bio splitting, much like the RAID0 code does.
--- drivers/md/raid5.c | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-)
drivers/md/raid5.c +32 -5
@@ -4806,7 +4806,7 @@ static int bio_fits_rdev(struct bio *bi)return 1 ; } -static int chunk_aligned_read (struct mddev *mddev,struct bio * raid_bio) +static int raid5_read_one_chunk (struct mddev *mddev,struct bio *raid_bio) {struct r5conf *conf = mddev->private;int dd_idx;
@@ -4815,7 +4815,7 @@ static int chunk_aligned_read(struct mddev *mddev, struct bio * raid_bio)sector_t end_sector;if (!in_chunk_boundary (mddev, raid_bio)) { -pr_debug ("chunk_aligned_read : non aligned\n" ); +pr_debug ("%s: non aligned\n" , __func__);return 0 ; }/*
@@ -4892,6 +4892,31 @@ static int chunk_aligned_read(struct mddev *mddev, struct bio * raid_bio) } } +static struct bio *chunk_aligned_read (struct mddev *mddev,struct bio *raid_bio) +{ +struct bio *split; + +do { +sector_t sector = raid_bio->bi_iter.bi_sector; +unsigned chunk_sects = mddev->chunk_sectors; +unsigned sectors = chunk_sects - (sector & (chunk_sects-1 )); + +if (sectors <bio_sectors (raid_bio)) { + split =bio_split (raid_bio, sectors,GFP_NOIO , fs_bio_set); +bio_chain (split, raid_bio); + }else + split = raid_bio; + +if (!raid5_read_one_chunk (mddev, split)) { +if (split != raid_bio) +generic_make_request (raid_bio); +return split; + } + }while (split != raid_bio); + +return NULL ; +} +/* __get_priority_stripe - get the next stripe to process * * Full stripe writes are allowed to pass preread active stripes up until
@@ -5169,9 +5194,11 @@ static void make_request(struct mddev *mddev, struct bio * bi)* data on failed drives. */ if (rw ==READ && mddev->degraded ==0 && - mddev->reshape_position == MaxSector && -chunk_aligned_read (mddev,bi)) -return ; + mddev->reshape_position == MaxSector) { + bi =chunk_aligned_read (mddev, bi); +if (!bi) +return ; + }if (unlikely (bi->bi_rw &REQ_DISCARD )) {make_discard_request (mddev, bi);
Signature · 1 line
2.1.4
PATCH v6 7/11 md/raid5: get rid of bio_fits_rdev()
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
Remove bio_fits_rdev() as sufficient merge_bvec_fn() handling is now performed by blk_queue_split() in md_make_request().
--- drivers/md/raid5.c | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-)
drivers/md/raid5.c +1 -22
@@ -4787,25 +4787,6 @@ static void raid5_align_endio(struct bio *bi, int error)add_bio_to_retry (raid_bi, conf); } -static int bio_fits_rdev (struct bio *bi) -{ -struct request_queue *q =bdev_get_queue (bi->bi_bdev); - -if (bio_sectors (bi) >queue_max_sectors (q)) -return 0 ; -blk_recount_segments (q, bi); -if (bi->bi_phys_segments >queue_max_segments (q)) -return 0 ; - -if (q->merge_bvec_fn) -/* it's too hard to apply the merge_bvec_fn at this stage, -* just just give up -*/ -return 0 ; - -return 1 ; -} -static int raid5_read_one_chunk (struct mddev *mddev,struct bio *raid_bio) {struct r5conf *conf = mddev->private;
@@ -4859,11 +4840,9 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio) align_bi->bi_bdev = rdev->bdev;__clear_bit (BIO_SEG_VALID , &align_bi->bi_flags); -if (!bio_fits_rdev (align_bi) || -is_badblock (rdev, align_bi->bi_iter.bi_sector, +if (is_badblock (rdev, align_bi->bi_iter.bi_sector,bio_sectors (align_bi), &first_bad, &bad_sectors)) { -/* too big in some way, or has a known bad block */ bio_put (align_bi);rdev_dec_pending (rdev, mddev);return 0 ;
Signature · 1 line
2.1.4
PATCH v6 8/11 block: kill merge_bvec_fn() completely
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely.
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
dm-era-target, and resolve merge conflicts]
--- block/blk-merge.c | 17 +----- block/blk-settings.c | 22 -------- drivers/block/drbd/drbd_int.h | 1 - drivers/block/drbd/drbd_main.c | 1 - drivers/block/drbd/drbd_req.c | 35 ------------ drivers/block/pktcdvd.c | 21 ------- drivers/block/rbd.c | 47 ---------------- drivers/md/dm-cache-target.c | 21 ------- drivers/md/dm-crypt.c | 16 ------ drivers/md/dm-era-target.c | 15 ----- drivers/md/dm-flakey.c | 16 ------ drivers/md/dm-linear.c | 16 ------ drivers/md/dm-log-writes.c | 16 ------ drivers/md/dm-raid.c | 19 ------- drivers/md/dm-snap.c | 15 ----- drivers/md/dm-stripe.c | 21 ------- drivers/md/dm-table.c | 8 --- drivers/md/dm-thin.c | 31 ----------- drivers/md/dm-verity.c | 16 ------ drivers/md/dm.c | 123 +---------------------------------------- drivers/md/dm.h | 2 - drivers/md/linear.c | 43 -------------- drivers/md/md.c | 26 --------- drivers/md/md.h | 12 ---- drivers/md/multipath.c | 21 ------- drivers/md/raid0.c | 56 ------------------- drivers/md/raid0.h | 2 - drivers/md/raid1.c | 58 +------------------ drivers/md/raid10.c | 121 +--------------------------------------- drivers/md/raid5.c | 32 ----------- include/linux/blkdev.h | 10 ---- include/linux/device-mapper.h | 4 -- 32 files changed, 9 insertions(+), 855 deletions(-)
block/blk-merge.c +3 -14
@@ -69,24 +69,13 @@ static struct bio *blk_bio_segment_split(struct request_queue *q,struct bio *split;struct bio_vec bv, bvprv;struct bvec_iter iter; -unsigned seg_size =0 , nsegs =0 ; +unsigned seg_size =0 , nsegs =0 , sectors =0 ;int prev =0 ; -struct bvec_merge_data bvm = { - .bi_bdev = bio->bi_bdev, - .bi_sector = bio->bi_iter.bi_sector, - .bi_size =0 , - .bi_rw = bio->bi_rw, - }; -bio_for_each_segment (bv, bio, iter) { -if (q->merge_bvec_fn && - q->merge_bvec_fn (q, &bvm, &bv) < (int ) bv.bv_len) - goto split; - - bvm.bi_size += bv.bv_len; + sectors += bv.bv_len >>9 ; -if (bvm.bi_size >>9 >queue_max_sectors (q)) +if (sectors >queue_max_sectors (q)) goto split;/*
block/blk-settings.c +0 -22
@@ -53,28 +53,6 @@ void blk_queue_unprep_rq(struct request_queue *q, unprep_rq_fn *ufn) }EXPORT_SYMBOL (blk_queue_unprep_rq); -/** -* blk_queue_merge_bvec - set a merge_bvec function for queue -* @q: queue -* @mbfn: merge_bvec_fn -* -* Usually queues have static limitations on the max sectors or segments that -* we can put in a request. Stacking drivers may have some settings that -* are dynamic, and thus we have to query the queue whether it is ok to -* add a new bio_vec to a bio at a given offset or not. If the block device -* has such limitations, it needs to register a merge_bvec_fn to control -* the size of bio's sent to it. Note that a block device *must* allow a -* single page to be added to an empty bio. The block device driver may want -* to use the bio_split() function to deal with these bio's. By default -* no merge_bvec_fn is defined for a queue, and only the fixed limits are -* honored. -*/ -void blk_queue_merge_bvec (struct request_queue *q,merge_bvec_fn *mbfn) -{ - q->merge_bvec_fn = mbfn; -} -EXPORT_SYMBOL (blk_queue_merge_bvec); -void blk_queue_softirq_done (struct request_queue *q,softirq_done_fn *fn) { q->softirq_done_fn = fn;
drivers/block/drbd/drbd_int.h +0 -1
@@ -1450,7 +1450,6 @@ extern void do_submit(struct work_struct *ws);extern void __drbd_make_request (struct drbd_device *,struct bio *,unsigned long );extern void drbd_make_request (struct request_queue *q,struct bio *bio);extern int drbd_read_remote (struct drbd_device *device,struct drbd_request *req); -extern int drbd_merge_bvec (struct request_queue *q,struct bvec_merge_data *bvm,struct bio_vec *bvec);extern int is_valid_ar_handle (struct drbd_request *,sector_t );
drivers/block/drbd/drbd_main.c +0 -1
@@ -2774,7 +2774,6 @@ enum drbd_ret_code drbd_create_device(struct drbd_config_context *adm_ctx, unsigThis triggers a max_bio_size message upon first attach or connect */ blk_queue_max_hw_sectors (q,DRBD_MAX_BIO_SIZE_SAFE >>8 );blk_queue_bounce_limit (q,BLK_BOUNCE_ANY ); -blk_queue_merge_bvec (q, drbd_merge_bvec); q->queue_lock = &resource->req_lock; device->md_io.page =alloc_page (GFP_KERNEL );
drivers/block/drbd/drbd_req.c +0 -35
@@ -1510,41 +1510,6 @@ void drbd_make_request(struct request_queue *q, struct bio *bio)__drbd_make_request (device, bio, start_jif); } -/* This is called by bio_add_page(). -* -* q->max_hw_sectors and other global limits are already enforced there. -* -* We need to call down to our lower level device, -* in case it has special restrictions. -* -* We also may need to enforce configured max-bio-bvecs limits. -* -* As long as the BIO is empty we have to allow at least one bvec, -* regardless of size and offset, so no need to ask lower levels. -*/ -int drbd_merge_bvec (struct request_queue *q,struct bvec_merge_data *bvm,struct bio_vec *bvec) -{ -struct drbd_device *device = (struct drbd_device *) q->queuedata; -unsigned int bio_size = bvm->bi_size; -int limit =DRBD_MAX_BIO_SIZE ; -int backing_limit; - -if (bio_size &&get_ldev (device)) { -unsigned int max_hw_sectors =queue_max_hw_sectors (q); -struct request_queue *const b = - device->ldev->backing_bdev->bd_disk->queue; -if (b->merge_bvec_fn) { - bvm->bi_bdev = device->ldev->backing_bdev; - backing_limit = b->merge_bvec_fn (b, bvm, bvec); - limit =min (limit, backing_limit); - } -put_ldev (device); -if ((limit >>9 ) > max_hw_sectors) - limit = max_hw_sectors <<9 ; - } -return limit; -} -void request_timer_fn (unsigned long data) {struct drbd_device *device = (struct drbd_device *) data;
drivers/block/pktcdvd.c +0 -21
@@ -2506,26 +2506,6 @@ end_io: -static int pkt_merge_bvec (struct request_queue *q,struct bvec_merge_data *bmd, -struct bio_vec *bvec) -{ -struct pktcdvd_device *pd = q->queuedata; -sector_t zone =get_zone (bmd->bi_sector, pd); -int used = ((bmd->bi_sector - zone) <<9 ) + bmd->bi_size; -int remaining = (pd->settings.size <<9 ) - used; -int remaining2; - -/* -* A bio <= PAGE_SIZE must be allowed. If it crosses a packet -* boundary, pkt_make_request() will split the bio. -*/ - remaining2 =PAGE_SIZE - bmd->bi_size; - remaining =max (remaining, remaining2); - -BUG_ON (remaining <0 ); -return remaining; -} -static void pkt_init_queue (struct pktcdvd_device *pd) {struct request_queue *q = pd->disk->queue;
@@ -2533,7 +2513,6 @@ static void pkt_init_queue(struct pktcdvd_device *pd)blk_queue_make_request (q, pkt_make_request);blk_queue_logical_block_size (q,CD_FRAMESIZE );blk_queue_max_hw_sectors (q,PACKET_MAX_SECTORS ); -blk_queue_merge_bvec (q, pkt_merge_bvec); q->queuedata = pd; }
drivers/block/rbd.c +0 -47
59 lines not on this page · raw message
drivers/md/dm-cache-target.c +0 -21
@@ -3778,26 +3778,6 @@ static int cache_iterate_devices(struct dm_target *ti,return r; } -/* -* We assume I/O is going to the origin (which is the volume -* more likely to have restrictions e.g. by being striped). -* (Looking up the exact location of the data would be expensive -* and could always be out of date by the time the bio is submitted.) -*/ -static int cache_bvec_merge (struct dm_target *ti, -struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct cache *cache = ti->private; -struct request_queue *q =bdev_get_queue (cache->origin_dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = cache->origin_dev->bdev; -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static void set_discard_limits (struct cache *cache,struct queue_limits *limits) {/*
@@ -3841,7 +3821,6 @@ static struct target_type cache_target = { .status = cache_status, .message = cache_message, .iterate_devices = cache_iterate_devices, - .merge = cache_bvec_merge, .io_hints = cache_io_hints, };
drivers/md/dm-crypt.c +0 -16
@@ -2035,21 +2035,6 @@ error:return -EINVAL ; } -static int crypt_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct crypt_config *cc = ti->private; -struct request_queue *q =bdev_get_queue (cc->dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = cc->dev->bdev; - bvm->bi_sector = cc->start +dm_target_offset (ti, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int crypt_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {
@@ -2070,7 +2055,6 @@ static struct target_type crypt_target = { .preresume = crypt_preresume, .resume = crypt_resume, .message = crypt_message, - .merge = crypt_merge, .iterate_devices = crypt_iterate_devices, };
drivers/md/dm-era-target.c +0 -15
@@ -1673,20 +1673,6 @@ static int era_iterate_devices(struct dm_target *ti,return fn (ti, era->origin_dev,0 ,get_dev_size (era->origin_dev), data); } -static int era_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct era *era = ti->private; -struct request_queue *q =bdev_get_queue (era->origin_dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = era->origin_dev->bdev; - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static void era_io_hints (struct dm_target *ti,struct queue_limits *limits) {struct era *era = ti->private;
@@ -1717,7 +1703,6 @@ static struct target_type era_target = { .status = era_status, .message = era_message, .iterate_devices = era_iterate_devices, - .merge = era_merge, .io_hints = era_io_hints };
drivers/md/dm-flakey.c +0 -16
@@ -387,21 +387,6 @@ static int flakey_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arreturn r ? :__blkdev_driver_ioctl (dev->bdev, dev->mode, cmd, arg); } -static int flakey_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct flakey_c *fc = ti->private; -struct request_queue *q =bdev_get_queue (fc->dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = fc->dev->bdev; - bvm->bi_sector =flakey_map_sector (ti, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int flakey_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {struct flakey_c *fc = ti->private;
@@ -419,7 +404,6 @@ static struct target_type flakey_target = { .end_io = flakey_end_io, .status = flakey_status, .ioctl = flakey_ioctl, - .merge = flakey_merge, .iterate_devices = flakey_iterate_devices, };
drivers/md/dm-linear.c +0 -16
@@ -130,21 +130,6 @@ static int linear_ioctl(struct dm_target *ti, unsigned int cmd,return r ? :__blkdev_driver_ioctl (dev->bdev, dev->mode, cmd, arg); } -static int linear_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct linear_c *lc = ti->private; -struct request_queue *q =bdev_get_queue (lc->dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = lc->dev->bdev; - bvm->bi_sector =linear_map_sector (ti, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int linear_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {
@@ -162,7 +147,6 @@ static struct target_type linear_target = { .map = linear_map, .status = linear_status, .ioctl = linear_ioctl, - .merge = linear_merge, .iterate_devices = linear_iterate_devices, };
drivers/md/dm-log-writes.c +0 -16
@@ -728,21 +728,6 @@ static int log_writes_ioctl(struct dm_target *ti, unsigned int cmd,return r ? :__blkdev_driver_ioctl (dev->bdev, dev->mode, cmd, arg); } -static int log_writes_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct log_writes_c *lc = ti->private; -struct request_queue *q =bdev_get_queue (lc->dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = lc->dev->bdev; - bvm->bi_sector =dm_target_offset (ti, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int log_writes_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data)
@@ -796,7 +781,6 @@ static struct target_type log_writes_target = { .end_io = normal_end_io, .status = log_writes_status, .ioctl = log_writes_ioctl, - .merge = log_writes_merge, .message = log_writes_message, .iterate_devices = log_writes_iterate_devices, .io_hints = log_writes_io_hints,
drivers/md/dm-raid.c +0 -19
@@ -1717,24 +1717,6 @@ static void raid_resume(struct dm_target *ti)mddev_resume (&rs->md); } -static int raid_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct raid_set *rs = ti->private; -struct md_personality *pers = rs->md.pers; - -if (pers && pers->mergeable_bvec) -return min (max_size, pers->mergeable_bvec (&rs->md, bvm, biovec)); - -/* -* In case we can't request the personality because -* the raid set is not running yet -* -* -> return safe minimum -*/ -return rs->md.chunk_sectors; -} -static struct target_type raid_target = { .name ="raid" , .version = {1 ,7 ,0 },
@@ -1749,7 +1731,6 @@ static struct target_type raid_target = { .presuspend = raid_presuspend, .postsuspend = raid_postsuspend, .resume = raid_resume, - .merge = raid_merge, };static int __init dm_raid_init (void )
drivers/md/dm-snap.c +0 -15
@@ -2330,20 +2330,6 @@ static void origin_status(struct dm_target *ti, status_type_t type, } } -static int origin_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct dm_origin *o = ti->private; -struct request_queue *q =bdev_get_queue (o->dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = o->dev->bdev; - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int origin_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {
@@ -2362,7 +2348,6 @@ static struct target_type origin_target = { .resume = origin_resume, .postsuspend = origin_postsuspend, .status = origin_status, - .merge = origin_merge, .iterate_devices = origin_iterate_devices, };
drivers/md/dm-stripe.c +0 -21
@@ -412,26 +412,6 @@ static void stripe_io_hints(struct dm_target *ti,blk_limits_io_opt (limits, chunk_size * sc->stripes); } -static int stripe_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct stripe_c *sc = ti->private; -sector_t bvm_sector = bvm->bi_sector; -uint32_t stripe; -struct request_queue *q; - -stripe_map_sector (sc, bvm_sector, &stripe, &bvm_sector); - - q =bdev_get_queue (sc->stripe[stripe].dev->bdev); -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = sc->stripe[stripe].dev->bdev; - bvm->bi_sector = sc->stripe[stripe].physical_start + bvm_sector; - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static struct target_type stripe_target = { .name ="striped" , .version = {1 ,5 ,1 },
@@ -443,7 +423,6 @@ static struct target_type stripe_target = { .status = stripe_status, .iterate_devices = stripe_iterate_devices, .io_hints = stripe_io_hints, - .merge = stripe_merge, };int __init dm_stripe_init (void )
drivers/md/dm-table.c +0 -8
@@ -440,14 +440,6 @@ static int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, q->limits.alignment_offset, (unsigned long long) start << SECTOR_SHIFT); -/* -* Check if merge fn is supported. -* If not we'll force DM to use PAGE_SIZE or -* smaller I/O, just to be safe. -*/ -if (dm_queue_merge_is_compulsory (q) && !ti->type->merge) -blk_limits_max_hw_sectors (limits, - (unsigned int ) (PAGE_SIZE >>9 ));return 0 ; }
drivers/md/dm-thin.c +0 -31
@@ -3875,20 +3875,6 @@ static int pool_iterate_devices(struct dm_target *ti,return fn (ti, pt->data_dev,0 , ti->len, data); } -static int pool_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct pool_c *pt = ti->private; -struct request_queue *q =bdev_get_queue (pt->data_dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = pt->data_dev->bdev; - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static void pool_io_hints (struct dm_target *ti,struct queue_limits *limits) {struct pool_c *pt = ti->private;
@@ -3965,7 +3951,6 @@ static struct target_type pool_target = { .resume = pool_resume, .message = pool_message, .status = pool_status, - .merge = pool_merge, .iterate_devices = pool_iterate_devices, .io_hints = pool_io_hints, };
@@ -4292,21 +4277,6 @@ err:DMEMIT ("Error" ); } -static int thin_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct thin_c *tc = ti->private; -struct request_queue *q =bdev_get_queue (tc->pool_dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = tc->pool_dev->bdev; - bvm->bi_sector =dm_target_offset (ti, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int thin_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {
@@ -4350,7 +4320,6 @@ static struct target_type thin_target = { .presuspend = thin_presuspend, .postsuspend = thin_postsuspend, .status = thin_status, - .merge = thin_merge, .iterate_devices = thin_iterate_devices, .io_hints = thin_io_hints, };
drivers/md/dm-verity.c +0 -16
@@ -648,21 +648,6 @@ static int verity_ioctl(struct dm_target *ti, unsigned cmd, cmd, arg); } -static int verity_merge (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size) -{ -struct dm_verity *v = ti->private; -struct request_queue *q =bdev_get_queue (v->data_dev->bdev); - -if (!q->merge_bvec_fn) -return max_size; - - bvm->bi_bdev = v->data_dev->bdev; - bvm->bi_sector =verity_map_sector (v, bvm->bi_sector); - -return min (max_size, q->merge_bvec_fn (q, bvm, biovec)); -} -static int verity_iterate_devices (struct dm_target *ti,iterate_devices_callout_fn fn,void *data) {
@@ -995,7 +980,6 @@ static struct target_type verity_target = { .map = verity_map, .status = verity_status, .ioctl = verity_ioctl, - .merge = verity_merge, .iterate_devices = verity_iterate_devices, .io_hints = verity_io_hints, };
drivers/md/dm.c +2 -121
170 lines not on this page · raw message
drivers/md/dm.h +0 -2
@@ -78,8 +78,6 @@ bool dm_table_mq_request_based(struct dm_table *t);void dm_table_free_md_mempools (struct dm_table *t);struct dm_md_mempools *dm_table_get_md_mempools (struct dm_table *t); -int dm_queue_merge_is_compulsory (struct request_queue *q); -void dm_lock_md_type (struct mapped_device *md);void dm_unlock_md_type (struct mapped_device *md);void dm_set_md_type (struct mapped_device *md,unsigned type);
drivers/md/linear.c +0 -43
55 lines not on this page · raw message
drivers/md/md.c +0 -26
@@ -352,29 +352,6 @@ static int md_congested(void *data, int bits)return mddev_congested (mddev, bits); } -static int md_mergeable_bvec (struct request_queue *q, -struct bvec_merge_data *bvm, -struct bio_vec *biovec) -{ -struct mddev *mddev = q->queuedata; -int ret; -rcu_read_lock (); -if (mddev->suspended) { -/* Must always allow one vec */ -if (bvm->bi_size ==0 ) - ret = biovec->bv_len; -else - ret =0 ; - }else { -struct md_personality *pers = mddev->pers; -if (pers && pers->mergeable_bvec) - ret = pers->mergeable_bvec (mddev, bvm, biovec); -else - ret = biovec->bv_len; - } -rcu_read_unlock (); -return ret; -}/* * Generic flush handling for md */
@@ -5188,7 +5165,6 @@ int md_run(struct mddev *mddev)if (mddev->queue) { mddev->queue->backing_dev_info.congested_data = mddev; mddev->queue->backing_dev_info.congested_fn = md_congested; -blk_queue_merge_bvec (mddev->queue, md_mergeable_bvec); }if (pers->sync_request) { if (mddev->kobj.sd &&
@@ -5317,7 +5293,6 @@ static void md_clean(struct mddev *mddev) mddev->degraded =0 ; mddev->safemode =0 ; mddev->private =NULL ; - mddev->merge_check_needed =0 ; mddev->bitmap_info.offset =0 ; mddev->bitmap_info.default_offset =0 ; mddev->bitmap_info.default_space =0 ;
@@ -5516,7 +5491,6 @@ static int do_md_stop(struct mddev *mddev, int mode,__md_stop_writes (mddev);__md_stop (mddev); - mddev->queue->merge_bvec_fn =NULL ; mddev->queue->backing_dev_info.congested_fn =NULL ;/* tell userspace to handle 'inactive' */
drivers/md/md.h +0 -12
@@ -134,10 +134,6 @@ enum flag_bits { Bitmap_sync,/* ..actually, not quite In_sync. Need a * bitmap-based recovery to get fully in sync */ - Unmerged,/* device is being added to array and should -* be considerred for bvec_merge_fn but not -* yet for actual IO -*/ WriteMostly,/* Avoid reading if at all possible */ AutoDetected,/* added by auto-detect */ Blocked, /* An error occurred but has not yet
@@ -374,10 +370,6 @@ struct mddev {int degraded;/* whether md should consider * adding a spare */ -int merge_check_needed;/* at least one -* member device -* has a -* merge_bvec_fn */ atomic_t recovery_active;/* blocks scheduled, but not written */ wait_queue_head_t recovery_wait;
@@ -532,10 +524,6 @@ struct md_personality/* congested implements bdi.congested_fn(). * Will not be called while array is 'suspended' */ int (*congested)(struct mddev *mddev,int bits); -/* mergeable_bvec is use to implement ->merge_bvec_fn */ -int (*mergeable_bvec)(struct mddev *mddev, -struct bvec_merge_data *bvm, -struct bio_vec *biovec); };struct md_sysfs_entry {
drivers/md/multipath.c +0 -21
@@ -257,18 +257,6 @@ static int multipath_add_disk(struct mddev *mddev, struct md_rdev *rdev)disk_stack_limits (mddev->gendisk, rdev->bdev, rdev->data_offset <<9 ); -/* as we don't honour merge_bvec_fn, we must never risk -* violating it, so limit ->max_segments to one, lying -* within a single page. -* (Note: it is very unlikely that a device with -* merge_bvec_fn will be involved in multipath.) -*/ -if (q->merge_bvec_fn) { -blk_queue_max_segments (mddev->queue,1 ); -blk_queue_segment_boundary (mddev->queue, -PAGE_CACHE_SIZE -1 ); - } -spin_lock_irq (&conf->device_lock); mddev->degraded--; rdev->raid_disk = path;
@@ -432,15 +420,6 @@ static int multipath_run (struct mddev *mddev)disk_stack_limits (mddev->gendisk, rdev->bdev, rdev->data_offset <<9 ); -/* as we don't honour merge_bvec_fn, we must never risk -* violating it, not that we ever expect a device with -* a merge_bvec_fn to be involved in multipath */ -if (rdev->bdev->bd_disk->queue->merge_bvec_fn) { -blk_queue_max_segments (mddev->queue,1 ); -blk_queue_segment_boundary (mddev->queue, -PAGE_CACHE_SIZE -1 ); - } -if (!test_bit (Faulty, &rdev->flags)) working_disks++; }
drivers/md/raid0.c +0 -56
74 lines not on this page · raw message
drivers/md/raid0.h +0 -2
@@ -12,8 +12,6 @@ struct r0conf {struct md_rdev **devlist;/* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; -int has_merge_bvec;/* at least one member has - * a merge_bvec_fn */ };#endif
drivers/md/raid1.c +1 -57
106 lines not on this page · raw message
drivers/md/raid10.c +3 -118
185 lines not on this page · raw message
drivers/md/raid5.c +0 -32
@@ -4669,35 +4669,6 @@ static int raid5_congested(struct mddev *mddev, int bits)return 0 ; } -/* We want read requests to align with chunks where possible, -* but write requests don't need to. -*/ -static int raid5_mergeable_bvec (struct mddev *mddev, -struct bvec_merge_data *bvm, -struct bio_vec *biovec) -{ -sector_t sector = bvm->bi_sector +get_start_sect (bvm->bi_bdev); -int max; -unsigned int chunk_sectors = mddev->chunk_sectors; -unsigned int bio_sectors = bvm->bi_size >>9 ; - -/* -* always allow writes to be mergeable, read as well if array -* is degraded as we'll go through stripe cache anyway. -*/ -if ((bvm->bi_rw &1 ) ==WRITE || mddev->degraded) -return biovec->bv_len; - -if (mddev->new_chunk_sectors < mddev->chunk_sectors) - chunk_sectors = mddev->new_chunk_sectors; - max = (chunk_sectors - ((sector & (chunk_sectors -1 )) + bio_sectors)) <<9 ; -if (max <0 ) max =0 ; -if (max <= biovec->bv_len && bio_sectors ==0 ) -return biovec->bv_len; -else -return max; -} -static int in_chunk_boundary (struct mddev *mddev,struct bio *bio) {sector_t sector = bio->bi_iter.bi_sector +get_start_sect (bio->bi_bdev);
@@ -7785,7 +7756,6 @@ static struct md_personality raid6_personality = .quiesce = raid5_quiesce, .takeover = raid6_takeover, .congested = raid5_congested, - .mergeable_bvec = raid5_mergeable_bvec, };static struct md_personality raid5_personality = {
@@ -7809,7 +7779,6 @@ static struct md_personality raid5_personality = .quiesce = raid5_quiesce, .takeover = raid5_takeover, .congested = raid5_congested, - .mergeable_bvec = raid5_mergeable_bvec, }; static struct md_personality raid4_personality =
@@ -7834,7 +7803,6 @@ static struct md_personality raid4_personality = .quiesce = raid5_quiesce, .takeover = raid4_takeover, .congested = raid5_congested, - .mergeable_bvec = raid5_mergeable_bvec, };static int __init raid5_init (void )
include/linux/blkdev.h +0 -10
@@ -213,14 +213,6 @@ typedef int (prep_rq_fn) (struct request_queue *, struct request *);typedef void (unprep_rq_fn ) (struct request_queue *,struct request *);struct bio_vec ; -struct bvec_merge_data { -struct block_device *bi_bdev; -sector_t bi_sector; -unsigned bi_size; -unsigned long bi_rw; -}; -typedef int (merge_bvec_fn ) (struct request_queue *,struct bvec_merge_data *, -struct bio_vec *);typedef void (softirq_done_fn )(struct request *);typedef int (dma_drain_needed_fn )(struct request *);typedef int (lld_busy_fn ) (struct request_queue *q);
@@ -305,7 +297,6 @@ struct request_queue {make_request_fn *make_request_fn;prep_rq_fn *prep_rq_fn;unprep_rq_fn *unprep_rq_fn; -merge_bvec_fn *merge_bvec_fn;softirq_done_fn *softirq_done_fn;rq_timed_out_fn *rq_timed_out_fn;dma_drain_needed_fn *dma_drain_needed;
@@ -991,7 +982,6 @@ extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);extern void blk_queue_segment_boundary (struct request_queue *,unsigned long );extern void blk_queue_prep_rq (struct request_queue *,prep_rq_fn *pfn);extern void blk_queue_unprep_rq (struct request_queue *,unprep_rq_fn *ufn); -extern void blk_queue_merge_bvec (struct request_queue *,merge_bvec_fn *);extern void blk_queue_dma_alignment (struct request_queue *,int );extern void blk_queue_update_dma_alignment (struct request_queue *,int );extern void blk_queue_softirq_done (struct request_queue *,softirq_done_fn *);
include/linux/device-mapper.h +0 -4
@@ -82,9 +82,6 @@ typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);typedef int (*dm_ioctl_fn ) (struct dm_target *ti,unsigned int cmd,unsigned long arg); -typedef int (*dm_merge_fn ) (struct dm_target *ti,struct bvec_merge_data *bvm, -struct bio_vec *biovec,int max_size); -/* * These iteration functions are typically used to check (and combine) * properties of underlying devices.
@@ -160,7 +157,6 @@ struct target_type {dm_status_fn status;dm_message_fn message;dm_ioctl_fn ioctl; -dm_merge_fn merge;dm_busy_fn busy;dm_iterate_devices_fn iterate_devices;dm_io_hints_fn io_hints;
Signature · 1 line
2.1.4
PATCH v6 9/11 fs: use helper bio_add_page() instead of open coding on bi_io_vec
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
Call pre-defined helper bio_add_page() instead of open coding for iterating through bi_io_vec[]. Doing that, it's possible to make some parts in filesystems and mm/page_io.c simpler than before.
--- fs/buffer.c | 7 ++----- fs/jfs/jfs_logmgr.c | 14 ++++---------- mm/page_io.c | 8 +++----- 3 files changed, 9 insertions(+), 20 deletions(-)
fs/buffer.c +2 -5
@@ -3046,12 +3046,9 @@ static int submit_bh_wbc(int rw, struct buffer_head *bh, bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >>9 ); bio->bi_bdev = bh->b_bdev; - bio->bi_io_vec[0 ].bv_page = bh->b_page; - bio->bi_io_vec[0 ].bv_len = bh->b_size; - bio->bi_io_vec[0 ].bv_offset =bh_offset (bh); - bio->bi_vcnt =1 ; - bio->bi_iter.bi_size = bh->b_size; +bio_add_page (bio, bh->b_page, bh->b_size,bh_offset (bh)); +BUG_ON (bio->bi_iter.bi_size != bh->b_size); bio->bi_end_io = end_bio_bh_io_sync; bio->bi_private = bh;
fs/jfs/jfs_logmgr.c +4 -10
@@ -1999,12 +1999,9 @@ static int lbmRead(struct jfs_log * log, int pn, struct lbuf ** bpp) bio->bi_iter.bi_sector = bp->l_blkno << (log->l2bsize -9 ); bio->bi_bdev = log->bdev; - bio->bi_io_vec[0 ].bv_page = bp->l_page; - bio->bi_io_vec[0 ].bv_len =LOGPSIZE ; - bio->bi_io_vec[0 ].bv_offset = bp->l_offset; - bio->bi_vcnt =1 ; - bio->bi_iter.bi_size =LOGPSIZE ; +bio_add_page (bio, bp->l_page,LOGPSIZE , bp->l_offset); +BUG_ON (bio->bi_iter.bi_size !=LOGPSIZE ); bio->bi_end_io = lbmIODone; bio->bi_private = bp;
@@ -2145,12 +2142,9 @@ static void lbmStartIO(struct lbuf * bp) bio =bio_alloc (GFP_NOFS ,1 ); bio->bi_iter.bi_sector = bp->l_blkno << (log->l2bsize -9 ); bio->bi_bdev = log->bdev; - bio->bi_io_vec[0 ].bv_page = bp->l_page; - bio->bi_io_vec[0 ].bv_len =LOGPSIZE ; - bio->bi_io_vec[0 ].bv_offset = bp->l_offset; - bio->bi_vcnt =1 ; - bio->bi_iter.bi_size =LOGPSIZE ; +bio_add_page (bio, bp->l_page,LOGPSIZE , bp->l_offset); +BUG_ON (bio->bi_iter.bi_size !=LOGPSIZE ); bio->bi_end_io = lbmIODone; bio->bi_private = bp;
mm/page_io.c +3 -5
@@ -33,12 +33,10 @@ static struct bio *get_swap_bio(gfp_t gfp_flags,if (bio) { bio->bi_iter.bi_sector =map_swap_page (page, &bio->bi_bdev); bio->bi_iter.bi_sector <<=PAGE_SHIFT -9 ; - bio->bi_io_vec[0 ].bv_page = page; - bio->bi_io_vec[0 ].bv_len =PAGE_SIZE ; - bio->bi_io_vec[0 ].bv_offset =0 ; - bio->bi_vcnt =1 ; - bio->bi_iter.bi_size =PAGE_SIZE ; bio->bi_end_io = end_io; + +bio_add_page (bio, page,PAGE_SIZE ,0 ); +BUG_ON (bio->bi_iter.bi_size !=PAGE_SIZE ); }return bio; }
Signature · 1 line
2.1.4
PATCH v6 10/11 block: remove bio_get_nr_vecs()
In reply to Ming LinFrom: Kent Overstreet <[email protected]>
We can always fill up the bio now, no need to estimate the possible size based on queue parameters.
--- block/bio.c | 23 ----------------------- drivers/md/dm-io.c | 2 +- fs/btrfs/compression.c | 5 +---- fs/btrfs/extent_io.c | 9 ++------- fs/btrfs/inode.c | 3 +-- fs/btrfs/scrub.c | 18 ++---------------- fs/direct-io.c | 2 +- fs/ext4/page-io.c | 3 +-- fs/ext4/readpage.c | 2 +- fs/f2fs/data.c | 2 +- fs/gfs2/lops.c | 9 +-------- fs/logfs/dev_bdev.c | 4 ++-- fs/mpage.c | 4 ++-- fs/nilfs2/segbuf.c | 2 +- fs/xfs/xfs_aops.c | 3 +-- include/linux/bio.h | 1 - 16 files changed, 18 insertions(+), 74 deletions(-)
block/bio.c +0 -23
@@ -692,29 +692,6 @@ integrity_clone:EXPORT_SYMBOL (bio_clone_bioset);/** -* bio_get_nr_vecs - return approx number of vecs -* @bdev: I/O target -* -* Return the approximate number of pages we can send to this target. -* There's no guarantee that you will be able to fit this number of pages -* into a bio, it does not account for dynamic restrictions that vary -* on offset. -*/ -int bio_get_nr_vecs (struct block_device *bdev) -{ -struct request_queue *q =bdev_get_queue (bdev); -int nr_pages; - - nr_pages =min_t (unsigned, -queue_max_segments (q), -queue_max_sectors (q) / (PAGE_SIZE >>9 ) +1 ); - -return min_t (unsigned, nr_pages,BIO_MAX_PAGES ); - -} -EXPORT_SYMBOL (bio_get_nr_vecs); - -/** * bio_add_pc_page - attempt to add page to bio * @q: the target queue * @bio: destination bio
drivers/md/dm-io.c +1 -1
@@ -314,7 +314,7 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,if ((rw &REQ_DISCARD ) || (rw &REQ_WRITE_SAME )) num_bvecs =1 ;else - num_bvecs =min_t (int,bio_get_nr_vecs (where->bdev), + num_bvecs =min_t (int,BIO_MAX_PAGES ,dm_sector_div_up (remaining, (PAGE_SIZE >>SECTOR_SHIFT ))); bio =bio_alloc_bioset (GFP_NOIO , num_bvecs, io->client->bios);
fs/btrfs/compression.c +1 -4
@@ -97,10 +97,7 @@ static inline int compressed_bio_size(struct btrfs_root *root,static struct bio *compressed_bio_alloc (struct block_device *bdev,u64 first_byte,gfp_t gfp_flags) { -int nr_vecs; - - nr_vecs =bio_get_nr_vecs (bdev); -return btrfs_bio_alloc (bdev, first_byte >>9 , nr_vecs, gfp_flags); +return btrfs_bio_alloc (bdev, first_byte >>9 ,BIO_MAX_PAGES , gfp_flags); } static int check_compressed_csum(struct inode *inode,
fs/btrfs/extent_io.c +2 -7
@@ -2802,9 +2802,7 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree, {int ret =0 ;struct bio *bio; -int nr;int contig =0 ; -int this_compressed = bio_flags &EXTENT_BIO_COMPRESSED ;int old_compressed = prev_bio_flags &EXTENT_BIO_COMPRESSED ;size_t page_size =min_t (size_t, size,PAGE_CACHE_SIZE );
@@ -2829,12 +2827,9 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree,return 0 ; } } -if (this_compressed) - nr =BIO_MAX_PAGES ; -else - nr =bio_get_nr_vecs (bdev); - bio =btrfs_bio_alloc (bdev, sector, nr,GFP_NOFS | __GFP_HIGH); + bio =btrfs_bio_alloc (bdev, sector,BIO_MAX_PAGES , +GFP_NOFS | __GFP_HIGH);if (!bio)return -ENOMEM ;
fs/btrfs/inode.c +1 -2
@@ -7957,8 +7957,7 @@ out:static struct bio *btrfs_dio_bio_alloc (struct block_device *bdev,u64 first_sector,gfp_t gfp_flags) { -int nr_vecs =bio_get_nr_vecs (bdev); -return btrfs_bio_alloc (bdev, first_sector, nr_vecs, gfp_flags); +return btrfs_bio_alloc (bdev, first_sector,BIO_MAX_PAGES , gfp_flags); } static inline int btrfs_lookup_and_bind_dio_csum(struct btrfs_root *root,
fs/btrfs/scrub.c +2 -16
@@ -454,27 +454,14 @@ struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace)struct scrub_ctx *sctx;int i;struct btrfs_fs_info *fs_info = dev->dev_root->fs_info; -int pages_per_rd_bio;int ret; -/* -* the setting of pages_per_rd_bio is correct for scrub but might -* be wrong for the dev_replace code where we might read from -* different devices in the initial huge bios. However, that -* code is able to correctly handle the case when adding a page -* to a bio fails. -*/ -if (dev->bdev) - pages_per_rd_bio =min_t (int,SCRUB_PAGES_PER_RD_BIO , -bio_get_nr_vecs (dev->bdev)); -else - pages_per_rd_bio =SCRUB_PAGES_PER_RD_BIO ; sctx =kzalloc (sizeof (*sctx),GFP_NOFS );if (!sctx) goto nomem;atomic_set (&sctx->refs,1 ); sctx->is_dev_replace = is_dev_replace; - sctx->pages_per_rd_bio = pages_per_rd_bio; + sctx->pages_per_rd_bio =SCRUB_PAGES_PER_RD_BIO ; sctx->curr =-1 ; sctx->dev_root = dev->dev_root;for (i =0 ; i <SCRUB_BIOS_PER_SCTX ; ++i) {
@@ -3896,8 +3883,7 @@ static int scrub_setup_wr_ctx(struct scrub_ctx *sctx,return 0 ;WARN_ON (!dev->bdev); - wr_ctx->pages_per_wr_bio =min_t (int,SCRUB_PAGES_PER_WR_BIO , -bio_get_nr_vecs (dev->bdev)); + wr_ctx->pages_per_wr_bio =SCRUB_PAGES_PER_WR_BIO ; wr_ctx->tgtdev = dev;atomic_set (&wr_ctx->flush_all_writes,0 );return 0 ;
fs/direct-io.c +1 -1
@@ -653,7 +653,7 @@ static inline int dio_new_bio(struct dio *dio, struct dio_submit *sdio,if (ret) goto out; sector = start_sector << (sdio->blkbits -9 ); - nr_pages =min (sdio->pages_in_io,bio_get_nr_vecs (map_bh->b_bdev)); + nr_pages =min (sdio->pages_in_io,BIO_MAX_PAGES );BUG_ON (nr_pages <=0 );dio_bio_alloc (dio, sdio, map_bh->b_bdev, sector, nr_pages); sdio->boundary =0 ;
fs/ext4/page-io.c +1 -2
@@ -375,10 +375,9 @@ void ext4_io_submit_init(struct ext4_io_submit *io,static int io_submit_init_bio (struct ext4_io_submit *io,struct buffer_head *bh) { -int nvecs =bio_get_nr_vecs (bh->b_bdev);struct bio *bio; - bio =bio_alloc (GFP_NOIO ,min (nvecs,BIO_MAX_PAGES )); + bio =bio_alloc (GFP_NOIO ,BIO_MAX_PAGES );if (!bio)return -ENOMEM ; bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >>9 );
fs/ext4/readpage.c +1 -1
@@ -284,7 +284,7 @@ int ext4_mpage_readpages(struct address_space *mapping, goto set_error_page; } bio =bio_alloc (GFP_KERNEL , -min_t (int, nr_pages,bio_get_nr_vecs (bdev))); +min_t (int, nr_pages,BIO_MAX_PAGES ));if (!bio) {if (ctx)ext4_release_crypto_ctx (ctx);
fs/f2fs/data.c +1 -1
@@ -1552,7 +1552,7 @@ submit_and_realloc: } bio =bio_alloc (GFP_KERNEL , -min_t (int, nr_pages,bio_get_nr_vecs (bdev))); +min_t (int, nr_pages,BIO_MAX_PAGES ));if (!bio) {if (ctx)f2fs_release_crypto_ctx (ctx);
fs/gfs2/lops.c +1 -8
@@ -261,18 +261,11 @@ void gfs2_log_flush_bio(struct gfs2_sbd *sdp, int rw)static struct bio *gfs2_log_alloc_bio (struct gfs2_sbd *sdp,u64 blkno) {struct super_block *sb = sdp->sd_vfs; -unsigned nrvecs =bio_get_nr_vecs (sb->s_bdev);struct bio *bio;BUG_ON (sdp->sd_log_bio); -while (1 ) { - bio =bio_alloc (GFP_NOIO , nrvecs); -if (likely (bio)) -break ; - nrvecs =max (nrvecs/2 ,1U ); - } - + bio =bio_alloc (GFP_NOIO ,BIO_MAX_PAGES ); bio->bi_iter.bi_sector = blkno * (sb->s_blocksize >>9 ); bio->bi_bdev = sb->s_bdev; bio->bi_end_io = gfs2_end_log_write;
fs/logfs/dev_bdev.c +2 -2
@@ -83,7 +83,7 @@ static int __bdev_writeseg(struct super_block *sb, u64 ofs, pgoff_t index,unsigned int max_pages;int i; - max_pages =min (nr_pages, (size_t )bio_get_nr_vecs (super->s_bdev)); + max_pages =min (nr_pages,BIO_MAX_PAGES ); bio =bio_alloc (GFP_NOFS , max_pages);BUG_ON (!bio);
@@ -175,7 +175,7 @@ static int do_erase(struct super_block *sb, u64 ofs, pgoff_t index,unsigned int max_pages;int i; - max_pages =min (nr_pages, (size_t )bio_get_nr_vecs (super->s_bdev)); + max_pages =min (nr_pages,BIO_MAX_PAGES ); bio =bio_alloc (GFP_NOFS , max_pages);BUG_ON (!bio);
fs/mpage.c +2 -2
@@ -277,7 +277,7 @@ alloc_new: goto out; } bio =mpage_alloc (bdev, blocks[0 ] << (blkbits -9 ), -min_t (int, nr_pages,bio_get_nr_vecs (bdev)), +min_t (int, nr_pages,BIO_MAX_PAGES ),GFP_KERNEL );if (bio ==NULL ) goto confused;
@@ -602,7 +602,7 @@ alloc_new: } } bio =mpage_alloc (bdev, blocks[0 ] << (blkbits -9 ), -bio_get_nr_vecs (bdev),GFP_NOFS |__GFP_HIGH); +BIO_MAX_PAGES ,GFP_NOFS |__GFP_HIGH);if (bio ==NULL ) goto confused;
fs/nilfs2/segbuf.c +1 -1
@@ -415,7 +415,7 @@ static void nilfs_segbuf_prepare_write(struct nilfs_segment_buffer *segbuf, { wi->bio =NULL ; wi->rest_blocks = segbuf->sb_sum.nblocks; - wi->max_pages =bio_get_nr_vecs (wi->nilfs->ns_bdev); + wi->max_pages =BIO_MAX_PAGES ; wi->nr_vecs =min (wi->max_pages, wi->rest_blocks); wi->start = wi->end =0 ; wi->blocknr = segbuf->sb_pseg_start;
fs/xfs/xfs_aops.c +1 -2
@@ -382,8 +382,7 @@ STATIC struct bio *xfs_alloc_ioend_bio ( struct buffer_head *bh) { -int nvecs =bio_get_nr_vecs (bh->b_bdev); -struct bio *bio =bio_alloc (GFP_NOIO , nvecs); +struct bio *bio =bio_alloc (GFP_NOIO ,BIO_MAX_PAGES );ASSERT (bio->bi_private ==NULL ); bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >>9 );
include/linux/bio.h +0 -1
@@ -440,7 +440,6 @@ void bio_chain(struct bio *, struct bio *);extern int bio_add_page (struct bio *,struct page *,unsigned int ,unsigned int );extern int bio_add_pc_page (struct request_queue *,struct bio *,struct page *,unsigned int ,unsigned int ); -extern int bio_get_nr_vecs (struct block_device *);struct rq_map_data ;extern struct bio *bio_map_user_iov (struct request_queue *,const struct iov_iter *,gfp_t );
Signature · 1 line
2.1.4
PATCH v6 11/11 Documentation: update notes in biovecs about arbitrarily sized bios
In reply to Ming LinFrom: Dongsu Park <[email protected]>
Update block/biovecs.txt so that it includes a note on what kind of effects arbitrarily sized bios would bring to the block layer. Also fix a trivial typo, bio_iter_iovec.
--- Documentation/block/biovecs.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
Documentation/block/biovecs.txt +9 -1
@@ -24,7 +24,7 @@ particular, presenting the illusion of partially completed biovecs so that normal code doesn't have to deal with bi_bvec_done. * Driver code should no longer refer to biovecs directly; we now have - bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs, + bio_iovec() and bio_iter_iovec() macros that return literal struct biovecs, constructed from the raw biovecs but taking into account bi_bvec_done and bi_size.
@@ -109,3 +109,11 @@ Other implications: over all the biovecs in the new bio - which is silly as it's not needed. So, don't use bi_vcnt anymore. + + * The current interface allows the block layer to split bios as needed, so we + could eliminate a lot of complexity particularly in stacked drivers. Code + that creates bios can then create whatever size bios are convenient, and + more importantly stacked drivers don't have to deal with both their own bio + size limitations and the limitations of the underlying devices. Thus + there's no need to define ->merge_bvec_fn() callbacks for individual block + drivers.
Signature · 1 line
2.1.4
Jens Axboe
maintainerQuoted 7 lines · Ming Lin
Hi Jens,
Neil/Mike/Martin have acked/reviewed PATCH 1. Now it's ready. Could you please apply this series?
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
Quoted 8 lines
Please note that, for discard, we cap the size at 2G. We'll change it to
UINT_MAXafter the splitting code in DM thinp is rewritten.v6:
- rebase on top of 4.2-rc6+
- fix discard/write_same 32bitbi_sizeoverflow issue
- add ACKs/Review from Mike/Christoph/Martin/Steven
Why did you rebase it on top of 4.2-rc6+? If you had kept it at 4.2-rc1, it would have applied to for-4.3/core a lot more easily. Care to respin on top of that?
Signature · 1 line
Jens Axboe
Quoted 12 lines · Jens Axboe
Quoted 11 lines · Ming Lin
Hi Jens,
Neil/Mike/Martin have acked/reviewed PATCH 1. Now it's ready. Could you please apply this series?
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
Please note that, for discard, we cap the size at 2G. We'll change it to
UINT_MAXafter the splitting code in DM thinp is rewritten.
Quoted 8 lines
Quoted 4 lines
v6:
- rebase on top of 4.2-rc6+
- fix discard/write_same 32bitbi_sizeoverflow issue
- add ACKs/Review from Mike/Christoph/Martin/StevenWhy did you rebase it on top of 4.2-rc6+? If you had kept it at 4.2-rc1, it would have applied to for-4.3/core a lot more easily. Care to respin on top of that?
Because commit bd4aaf8 "dm: fix dm_merge_bvec regression on 32 bit systems" in 4.2-rc6 conflicted with PATCH 6.
Sure, I can respin on top of 4.2-rc1.
Should I re-post new series to mail list or just update my tree?
Jens Axboe
maintainerQuoted 22 lines · Ming Lin
Quoted 12 lines · Jens Axboe
Quoted 11 lines · Ming Lin
Hi Jens,
Neil/Mike/Martin have acked/reviewed PATCH 1. Now it's ready. Could you please apply this series?
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
Please note that, for discard, we cap the size at 2G. We'll change it to
UINT_MAXafter the splitting code in DM thinp is rewritten.Quoted 8 lines
Quoted 4 lines
v6:
- rebase on top of 4.2-rc6+
- fix discard/write_same 32bitbi_sizeoverflow issue
- add ACKs/Review from Mike/Christoph/Martin/StevenWhy did you rebase it on top of 4.2-rc6+? If you had kept it at 4.2-rc1, it would have applied to for-4.3/core a lot more easily. Care to respin on top of that?
Quoted 6 lines
Because commit bd4aaf8 "dm: fix
dm_merge_bvecregression on 32 bit systems" in 4.2-rc6 conflicted with PATCH 6.Sure, I can respin on top of 4.2-rc1.
Should I re-post new series to mail list or just update my tree?
Just repost to me, if you don't want to spam the list again.
Signature · 1 line
Jens Axboe
Quoted 23 lines · Jens Axboe
Quoted 22 lines · Ming Lin
Quoted 20 lines · Jens Axboe
Quoted 7 lines · Ming Lin
Hi Jens,
Neil/Mike/Martin have acked/reviewed PATCH 1. Now it's ready. Could you please apply this series?
https://git.kernel.org/cgit/linux/kernel/git/mlin/linux.git/log/?h=block-generic-req
Quoted 8 lines
Please note that, for discard, we cap the size at 2G. We'll change it to
UINT_MAXafter the splitting code in DM thinp is rewritten.v6:
- rebase on top of 4.2-rc6+
- fix discard/write_same 32bitbi_sizeoverflow issue
- add ACKs/Review from Mike/Christoph/Martin/StevenWhy did you rebase it on top of 4.2-rc6+? If you had kept it at 4.2-rc1, it would have applied to for-4.3/core a lot more easily. Care to respin on top of that?
Quoted 8 lines
Quoted 6 lines
Because commit bd4aaf8 "dm: fix
dm_merge_bvecregression on 32 bit systems" in 4.2-rc6 conflicted with PATCH 6.Sure, I can respin on top of 4.2-rc1.
Should I re-post new series to mail list or just update my tree?
Just repost to me, if you don't want to spam the list again.
Already reposted to you off list.
Thanks.