toolchain/external: bump Linaro ARM, ARMEB and AArch64 toolchains (branch yem/toolchain-linaro-2015.08)

PATCH Superseded Yann E. MORIN 3 participants 8 messages Oct 26, 2015 – Nov 3, 2015

lore

Share & tools

lore

Yann E. MORIN

author

2015-10-26 23:49 UTC #0 lore raw

v3 cover toolchain/external: bump Linaro ARM, ARMEB and AArch64 toolchains (branch yem/toolchain-linaro-2015.08)

Hello All!

This series bumps the Linaro toolchains for ARM, ARMEB andAArch64 to the latst release advertised on their toolchain page, 2015.08.

These new toolchains (like all those produced after 2014.09) are only available for x86_64 hosts. So, we keep the previous 2014.09 toolchains for x86 hosts, and add the new ones for x86_64 hosts.

To this effect:
- we keep the same Kconfig symbol for both variants (x86 or x86_64

    host),

- we duplicate the symbol, each entry depending on an x86 or x86_64 host.

Since we have two entries, we can give them different prompts and different help texts.

Changes v2 -> v3:
- bump further
- don't add legacy symbols, don;t add versioned symbols (no longer needed)

Regards,
Yann E. MORIN.

The following changes since commit 3c79446dc7ffff50974dd67496b84c5a605d8e11:

xorg-server: bump to version 1.17.3 (2015-10-26 23:30:23 +0100)

are available in the git repository at:

git://git.busybox.net/~ymorin/git/buildroot yem/toolchain-linaro-2015.08

for you to fetch changes up to 0ec78e8e5fe8005a752826731f86055aff3bdce3:

toolchain/external: bump Linaro AArch64 to 2015.08 (2015-10-27 00:39:04 +0100)

----------------------------------------------------------------
Yann E. MORIN (3):
toolchain/external: bump Linaro ARM to 2015.08 toolchain/external: bump Linaro ARMEB to 2015.08 toolchain/external: bump Linaro AArch64 to 2015.08

 toolchain/toolchain-external/Config.in             | 73 ++++++++++++++++++++--
 .../toolchain-external/toolchain-external.hash     |  3 +
 toolchain/toolchain-external/toolchain-external.mk | 15 +++++
 3 files changed, 85 insertions(+), 6 deletions(-)

Signature · 6 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

Yann E. MORIN

author

2015-10-26 23:49 UTC #1 lore raw

PATCH v3 1/3 toolchain/external: bump Linaro ARM to 2015.08

That toolchain is built for an x86_64 host, so we make it available only for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.

To avoid dealing with legacy symbols and introduce versioned options, we reuse the same symbol for both toolchains. Thanks to the different depednencies (on the host), we can give them different prompts and different help texts.

Signed-off-by "Yann E. MORIN" <[email protected]>

Cc Thomas Petazzoni <[email protected]>

Cc Arnout Vandecappelle <[email protected]>

---
 toolchain/toolchain-external/Config.in             | 28 ++++++++++++++++++++--
 .../toolchain-external/toolchain-external.hash     |  1 +
 toolchain/toolchain-external/toolchain-external.mk |  5 ++++
 3 files changed, 32 insertions(+), 2 deletions(-)

toolchain/toolchain-external/Config.in +26 -2

index 4291394..3b1db79 100644
@@ -11,17 +11,19 @@ comment "Linaro toolchains available for Cortex-A + EABIhf"
 	depends on !BR2_ARM_CPU_ARMV7A || !BR2_ARM_EABIHF
 	depends on !BR2_STATIC_LIBS
 
+# Note: we use the same symbol for both Linaro toolchains.
+# Since they have different dependencies (the host), we can
+# give them different prompts and different help texts.
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
 	bool "Linaro ARM 2014.09"
 	depends on BR2_arm
 	depends on BR2_ARM_CPU_ARMV7A
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	depends on BR2_HOSTARCH = "x86"
 	depends on BR2_ARM_EABIHF
 	depends on !BR2_STATIC_LIBS
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
 	select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
 	help

@@ -33,6 +35,28 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
 	  with the hard floating point calling convention, and uses
 	  the VFPv3-D16 FPU instructions.
 
+# See the note above.
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
+	bool "Linaro ARM 2015.08"
+	depends on BR2_arm
+	depends on BR2_ARM_CPU_ARMV7A
+	depends on BR2_HOSTARCH = "x86_64"
+	depends on BR2_ARM_EABIHF
+	depends on !BR2_STATIC_LIBS
+	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_INSTALL_LIBSTDCPP
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
+	select BR2_TOOLCHAIN_GCC_AT_LEAST_5
+	help
+	  Linaro toolchain for the ARM architecture. It uses Linaro
+	  GCC 2015.08 (based on gcc 5.1), Linaro GDB 2015.08 (based on
+	  GDB 7.10), eglibc 2.21, Binutils 2015.10 (based on 2.25). It
+	  generates code that runs on all Cortex-A profile devices,
+	  but tuned for the Cortex-A9. The code generated is Thumb 2,
+	  with the hard floating point calling convention, and uses
+	  the VFPv3-D16 FPU instructions.
+
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
 	bool "Linaro armeb 2014.09"
 	depends on BR2_armeb

toolchain/toolchain-external/toolchain-external.hash +1 -0

index 8424dca..d9c73b4 100644
@@ -50,6 +50,7 @@ sha256 254af7d02eb3bcc8345c78e131700bc995d65b68232caaed21150a5fd1456070  arago-2
 
 # ARM and Aarch64 toolchains from Linaro
 sha256 0cffac0caea0eb3c8bdddfa14be011ce366680f40aeddbefc7cf23cb6d4f1891  gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
+sha256 34812c5d0556db86259ac6eb3f8bcf4ce8eca3fa8d7180875958492a42e9853f  gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.tar.xz
 sha256 4bc9d86390f8fa67a693ba4768ba5b12faaf7dd37c706c05ccd9321e765226e4  gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
 sha256 3954f496ab01de67241109e82abfaa9b7625fdab4f05e79e7902e9814a07b832  gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz

toolchain/toolchain-external/toolchain-external.mk +5 -0

index 4e12a1c..b745ed7 100644
@@ -312,8 +312,13 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
 	rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
 endef
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
+ifeq ($(HOSTARCH),x86)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
+else
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/arm-linux-gnueabihf
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.tar.xz
+endif
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries

Signature · 1 line

1.9.1

Baruch Siach

2015-10-27 04:33 UTC #2 lore raw

PATCH v3 1/3 toolchain/external: bump Linaro ARM to 2015.08

Hi Yann,

toolchain/toolchain-external/Config.in config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM · line 54

Quoted 4 lines · Yann E. MORIN

toolchain/toolchain-external/Config.in +4 -0

+	help
+	  Linaro toolchain for the ARM architecture. It uses Linaro
+	  GCC 2015.08 (based on gcc 5.1), Linaro GDB 2015.08 (based on
+	  GDB 7.10), eglibc 2.21, Binutils 2015.10 (based on 2.25). It

glibc most likely, not eglibc.

toolchain/toolchain-external/Config.in config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM · line 58

Quoted 4 lines

toolchain/toolchain-external/Config.in +4 -0

+	  generates code that runs on all Cortex-A profile devices,
+	  but tuned for the Cortex-A9. The code generated is Thumb 2,
+	  with the hard floating point calling convention, and uses
+	  the VFPv3-D16 FPU instructions.

baruch

Signature · 3 lines

     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

Yann E. MORIN

author

2015-10-27 12:52 UTC #3 lore raw

PATCH v3 1/3 toolchain/external: bump Linaro ARM to 2015.08

Baruch, All,

On 2015-10-27 06:33 +0200, Baruch Siach spake thusly:

Quoted 7 lines · Yann E. MORIN

toolchain/toolchain-external/Config.in config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM · line 54
Quoted 4 lines
toolchain/toolchain-external/Config.in +4 -0
+	help
+	  Linaro toolchain for the ARM architecture. It uses Linaro
+	  GCC 2015.08 (based on gcc 5.1), Linaro GDB 2015.08 (based on
+	  GDB 7.10), eglibc 2.21, Binutils 2015.10 (based on 2.25). It
glibc most likely, not eglibc.

Good catch. Thanks! :-)

Regards,
Yann E. MORIN.

Signature · 6 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

Yann E. MORIN

author

2015-10-26 23:49 UTC #4 lore raw

PATCH v3 2/3 toolchain/external: bump Linaro ARMEB to 2015.08

In reply to Yann E. MORIN

That toolchain is built for an x86_64 host, so we make it available only for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.

Signed-off-by "Yann E. MORIN" <[email protected]>

Cc Thomas Petazzoni <[email protected]>

Cc Arnout Vandecappelle <[email protected]>

---
 toolchain/toolchain-external/Config.in             | 26 ++++++++++++++++++++--
 .../toolchain-external/toolchain-external.hash     |  1 +
 toolchain/toolchain-external/toolchain-external.mk |  5 +++++
 3 files changed, 30 insertions(+), 2 deletions(-)

toolchain/toolchain-external/Config.in +24 -2

index 3b1db79..fb38c68 100644
@@ -57,17 +57,17 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
 	  with the hard floating point calling convention, and uses
 	  the VFPv3-D16 FPU instructions.
 
+# See the note above.
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
 	bool "Linaro armeb 2014.09"
 	depends on BR2_armeb
 	depends on BR2_ARM_CPU_ARMV7A
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	depends on BR2_HOSTARCH = "x86"
 	depends on BR2_ARM_EABIHF
 	depends on !BR2_STATIC_LIBS
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
 	select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
 	help

@@ -79,6 +79,28 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
 	  generated is Thumb 2, with the hard floating point calling
 	  convention, and uses the VFPv3-D16 FPU instructions.
 
+# See the note above.
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
+	bool "Linaro armeb 2015.08"
+	depends on BR2_armeb
+	depends on BR2_ARM_CPU_ARMV7A
+	depends on BR2_HOSTARCH = "x86_64"
+	depends on BR2_ARM_EABIHF
+	depends on !BR2_STATIC_LIBS
+	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_INSTALL_LIBSTDCPP
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
+	select BR2_TOOLCHAIN_GCC_AT_LEAST_5
+	help
+	  Linaro toolchain for the ARM big endian architecture. It
+	  uses Linaro GCC 2014.09 (based on gcc 4.9), Linaro GDB
+	  2013.10 (based on GDB 7.6), eglibc 2.19, Binutils 2014.09
+	  (based on 2.24). It generates code that runs on all Cortex-A
+	  profile devices, but tuned for the Cortex-A9. The code
+	  generated is Thumb 2, with the hard floating point calling
+	  convention, and uses the VFPv3-D16 FPU instructions.
+
 config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201405
 	bool "Sourcery CodeBench ARM 2014.05"
 	depends on BR2_arm

toolchain/toolchain-external/toolchain-external.hash +1 -0

index d9c73b4..422cf21 100644
@@ -52,6 +52,7 @@ sha256 254af7d02eb3bcc8345c78e131700bc995d65b68232caaed21150a5fd1456070  arago-2
 sha256 0cffac0caea0eb3c8bdddfa14be011ce366680f40aeddbefc7cf23cb6d4f1891  gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
 sha256 34812c5d0556db86259ac6eb3f8bcf4ce8eca3fa8d7180875958492a42e9853f  gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.tar.xz
 sha256 4bc9d86390f8fa67a693ba4768ba5b12faaf7dd37c706c05ccd9321e765226e4  gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
+sha256 24b86799a6c64380c740bf31a700b46e854fc0a821da2341e9868f0196c864de  gcc-linaro-5.1-2015.08-x86_64_armeb-linux-gnueabihf.tar.xz
 sha256 3954f496ab01de67241109e82abfaa9b7625fdab4f05e79e7902e9814a07b832  gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
 
 # Synopsys DesignWare ARC toolchains

toolchain/toolchain-external/toolchain-external.mk +5 -0

index b745ed7..c9405a4 100644
@@ -321,8 +321,13 @@ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.ta
 endif
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
+ifeq ($(HOSTARCH),x86)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
+else
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/armeb-linux-gnueabihf
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_armeb-linux-gnueabihf.tar.xz
+endif
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu

Signature · 1 line

1.9.1

Yann E. MORIN

author

2015-10-26 23:49 UTC #5 lore raw

PATCH v3 3/3 toolchain/external: bump Linaro AArch64 to 2015.08

In reply to Yann E. MORIN

That toolchain is built for an x86_64 host, so we make it available only for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.

Signed-off-by "Yann E. MORIN" <[email protected]>

Cc Thomas Petazzoni <[email protected]>

Cc Arnout Vandecappelle <[email protected]>

---
 toolchain/toolchain-external/Config.in               | 19 +++++++++++++++++--
 toolchain/toolchain-external/toolchain-external.hash |  1 +
 toolchain/toolchain-external/toolchain-external.mk   |  5 +++++
 3 files changed, 23 insertions(+), 2 deletions(-)

toolchain/toolchain-external/Config.in +17 -2

index fb38c68..0413a37 100644
@@ -836,14 +836,14 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
 	  Toolchain for the Blackfin architecture, from
 	  http://blackfin.uclinux.org.
 
+# See note about Linar ARM/ARMEB toolchains, above.
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
 	bool "Linaro AArch64 14.09"
 	depends on BR2_aarch64
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	depends on BR2_HOSTARCH = "x86"
 	depends on !BR2_STATIC_LIBS
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
 	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
 	select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9

@@ -851,6 +851,21 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
 	  Toolchain for the AArch64 architecture, from
 	  http://www.linaro.org/engineering/armv8/
 
+# See note about Linar ARM/ARMEB toolchains, above.
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
+	bool "Linaro AArch64 2015.08"
+	depends on BR2_aarch64
+	depends on BR2_HOSTARCH = "x86_64"
+	depends on !BR2_STATIC_LIBS
+	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+	select BR2_INSTALL_LIBSTDCPP
+	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
+	select BR2_TOOLCHAIN_GCC_AT_LEAST_5
+	help
+	  Toolchain for the AArch64 architecture, from
+	  http://www.linaro.org/engineering/armv8/
+
 config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64
 	bool "CodeSourcery AArch64 2014.05"
 	depends on BR2_aarch64

toolchain/toolchain-external/toolchain-external.hash +1 -0

index 422cf21..2d41389 100644
@@ -54,6 +54,7 @@ sha256 34812c5d0556db86259ac6eb3f8bcf4ce8eca3fa8d7180875958492a42e9853f  gcc-lin
 sha256 4bc9d86390f8fa67a693ba4768ba5b12faaf7dd37c706c05ccd9321e765226e4  gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
 sha256 24b86799a6c64380c740bf31a700b46e854fc0a821da2341e9868f0196c864de  gcc-linaro-5.1-2015.08-x86_64_armeb-linux-gnueabihf.tar.xz
 sha256 3954f496ab01de67241109e82abfaa9b7625fdab4f05e79e7902e9814a07b832  gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
+sha256 b9137008744d9009877f662dbac7481d673cdcb1798e727e325a37c98a0f63da  gcc-linaro-5.1-2015.08-x86_64_aarch64-linux-gnu.tar.xz
 
 # Synopsys DesignWare ARC toolchains
 sha256 1fa4ea2c8616623205f1c7beca02ea31b019099528a7433e5b020b0876b93bf3  arc_gnu_2014.12_prebuilt_uclibc_le_arc700_linux_install.tar.gz

toolchain/toolchain-external/toolchain-external.mk +5 -0

index c9405a4..0f818b4 100644
@@ -385,8 +385,13 @@ TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain
 TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
+ifeq ($(HOSTARCH),x86)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
+else
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/aarch64-linux-gnu
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_aarch64-linux-gnu.tar.xz
+endif
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-linux-gnu

Signature · 1 line

1.9.1

Thomas Petazzoni

2015-11-03 21:11 UTC #6 lore raw

v3 cover toolchain/external: bump Linaro ARM, ARMEB and AArch64 toolchains (branch yem/toolchain-linaro-2015.08)

In reply to Yann E. MORIN

Dear Yann E. MORIN,

Quoted 4 lines · Yann E. MORIN

Yann E. MORIN (3):
toolchain/external: bump Linaro ARM to 2015.08 toolchain/external: bump Linaro ARMEB to 2015.08 toolchain/external: bump Linaro AArch64 to 2015.08

All three applied, thanks!

On the first patch, I fixed the s/eglibc/glibc/ typo noticed by Baruch.

On the second patch, I rewrote the Config.in help text, since it was not referring to the proper Linaro toolchain version (you copy/pasted from the wrong place it seems).

Thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Yann E. MORIN

author

2015-11-03 21:20 UTC #7 lore raw

v3 cover toolchain/external: bump Linaro ARM, ARMEB and AArch64 toolchains (branch yem/toolchain-linaro-2015.08)

Thomas, All,

On 2015-11-03 22:11 +0100, Thomas Petazzoni spake thusly:

Quoted 9 lines · Yann E. MORIN

Quoted 4 lines
Yann E. MORIN (3):
toolchain/external: bump Linaro ARM to 2015.08 toolchain/external: bump Linaro ARMEB to 2015.08 toolchain/external: bump Linaro AArch64 to 2015.08
All three applied, thanks!
On the first patch, I fixed the s/eglibc/glibc/ typo noticed by Baruch.

Meh...

Quoted 3 lines

On the second patch, I rewrote the Config.in help text, since it was not referring to the proper Linaro toolchain version (you copy/pasted from the wrong place it seems).

Meh again...

Thanks! :-)

Regards,
Yann E. MORIN.

Signature · 6 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'