Skip to contentSkip to conversation

i40e: Look up MAC address in Open Firmware or IDPROM

PATCH Superseded Sowmini Varadhan 1 participant 1 message Oct 30, 2015

Subsystems (3)

v2 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 i40e: Look up MAC address in Open Firmware or IDPROM

This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC address in Open Firmware or IDPROM").

As with that fix, attempt to look up the MAC address in Open Firmware on systems that support it, and use IDPROM on SPARC if no OF address is found.

---
v2: review comments from Andy Shevchenko

 drivers/net/ethernet/intel/i40e/i40e_common.c |   32 +++++++++++++++++++++++++
 1 files changed, 32 insertions(+), 0 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_common.c +32 -0
index 2d74c6e..5b3e377 100644
@@ -24,6 +24,14 @@
  *
  ******************************************************************************/
 
+#include <linux/etherdevice.h>
+#include <linux/of_net.h>
+#include <linux/pci.h>
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#include <asm/prom.h>
+#endif
+#include "i40e.h"
 #include "i40e_type.h"
 #include "i40e_adminq.h"
 #include "i40e_prototype.h"
@@ -1008,6 +1016,27 @@ i40e_status i40e_aq_mac_address_write(struct i40e_hw *hw,
 	return status;
 }
 
+static int i40e_get_platform_mac_addr(struct i40e_hw *hw, u8 *mac_addr)
+{
+#ifdef CONFIG_OF
+	struct i40e_pf *pf = hw->back;
+	struct device_node *dp = pci_device_to_OF_node(pf->pdev);
+	const unsigned char *addr;
+
+	addr = of_get_mac_address(dp);
+	if (addr) {
+		ether_addr_copy(mac_addr, addr);
+		return 0;
+	}
+#endif /* CONFIG_OF */
+
+#ifdef CONFIG_SPARC
+	ether_addr_copy(mac_addr, idprom->id_ethaddr);
+	return 0;
+#endif /* CONFIG_SPARC */
+	return 1;
+}
+
 /**
  * i40e_get_mac_addr - get MAC address
  * @hw: pointer to the HW structure
@@ -1021,6 +1050,9 @@ i40e_status i40e_get_mac_addr(struct i40e_hw *hw, u8 *mac_addr)
 	i40e_status status;
 	u16 flags = 0;
 
+	if (!i40e_get_platform_mac_addr(hw, mac_addr))
+		return I40E_SUCCESS;
+
 	status = i40e_aq_mac_address_read(hw, &flags, &addrs, NULL);
 
 	if (flags & I40E_AQC_LAN_ADDR_VALID)
Signature · 1 line
1.7.1