Skip to contentSkip to conversation

xen: sched: fix locking of {insert, remove}_vcpu()

PATCH In review Dario Faggioli 5 participants 17 messages Nov 4, 2015 – Nov 24, 2015

lore
Share & tools
lore
#0 lore raw

v4 cover xen: sched: fix locking of {insert, remove}_vcpu()

Hi,

This series, improves how inserting vCPUs in schedulers runqueues is done, including fixing a couple of bugs, and paving the way for more improvement in Credit2 runqueue handling (will be submitted as a separate series).

v3 is here:
http://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03278.html
Message-Id: <[email protected]>

Only patch 1 really changed from v3, and patches 1 and 2 are the only one that seem to me to be missing suitable Ack-s.

There is a git branch for this series here:
git://xenbits.xen.org/people/dariof/xen.git rel/sched/fix-vcpu-ins-rem-v4

Regards,
Dario
---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

 xen/common/cpupool.c       |    7 -----
 xen/common/sched_credit.c  |   18 ++++++++-----
 xen/common/sched_credit2.c |   55 ++++++++++++++--------------------------
 xen/common/sched_rt.c      |   61 ++++++++++++++++++++++----------------------
 xen/common/schedule.c      |   57 +++++++++++++++++++++++++++++++----------
 5 files changed, 103 insertions(+), 95 deletions(-)

--
<<This happens because I choose it to happen!>> (Raistlin Majere)
-----------------------------------------------------------------
Dario Faggioli, Ph.D, http://about.me/dario.faggioli
Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK)

#1 lore raw

PATCH v4 1/6 xen: sched: fix locking of remove_vcpu() in credit1

In fact, csched_vcpu_remove() (i.e., the credit1 implementation of remove_vcpu()) manipulates runqueues, so holding the runqueue lock is necessary.

However, the vCPU just can't be on the runqueue, when the function is called. We can therefore ASSERT() that, and avoid doing any runqueue manipulations (rather than adding the runqueue locking around it).

Also, while there, *_lock_irq() (for the private lock) is enough, there is no need to *_lock_irqsave().

---
Cc: George Dunlap <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Jan Beulich <[email protected]>
---
Changes from v3:
* instead of adding locking, get rid of __runq_remove(), and add an ASSERT() about vCPU not being in runq already, as suggested during review.

Changes from the other series:
* split the patch (wrt the original patch, in the original series), and take care, in this one, only of remove_vcpu();
* removed pointless parentheses.
---
The fact that vCPU can't be in runqueue when calling remove_vcpu() is true for other schedulers as well. In them, though, there isn't any race condition to fix. Therefore, taking care of the other schedulers will happen in a followup series.

---
 xen/common/sched_credit.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
xen/common/sched_credit.c +4 -7
index 1b30e67..6dfcff6 100644
@@ -934,28 +934,25 @@ csched_vcpu_remove(const struct scheduler *ops, struct vcpu *vc)
     struct csched_private *prv = CSCHED_PRIV(ops);
     struct csched_vcpu * const svc = CSCHED_VCPU(vc);
     struct csched_dom * const sdom = svc->sdom;
-    unsigned long flags;
 
     SCHED_STAT_CRANK(vcpu_remove);
 
+    ASSERT(!__vcpu_on_runq(svc));
+
     if ( test_and_clear_bit(CSCHED_FLAG_VCPU_PARKED, &svc->flags) )
     {
         SCHED_STAT_CRANK(vcpu_unpark);
         vcpu_unpause(svc->vcpu);
     }
 
-    if ( __vcpu_on_runq(svc) )
-        __runq_remove(svc);
-
-    spin_lock_irqsave(&(prv->lock), flags);
+    spin_lock_irq(&prv->lock);
 
     if ( !list_empty(&svc->active_vcpu_elem) )
         __csched_vcpu_acct_stop_locked(prv, svc);
 
-    spin_unlock_irqrestore(&(prv->lock), flags);
+    spin_unlock_irq(&prv->lock);
 
     BUG_ON( sdom == NULL );
-    BUG_ON( !list_empty(&svc->runq_elem) );
 }
 
 static void
Reviewed-by on v4 1/6
#2 lore raw

Re: [PATCH v4 1/6] xen: sched: fix locking of remove_vcpu() in credit1

Quoted 9 lines · Dario Faggioli

In fact, csched_vcpu_remove() (i.e., the credit1 implementation of remove_vcpu()) manipulates runqueues, so holding the runqueue lock is necessary.

However, the vCPU just can't be on the runqueue, when the function is called. We can therefore ASSERT() that, and avoid doing any runqueue manipulations (rather than adding the runqueue locking around it).

Quoted 4 lines

Also, while there, *_lock_irq() (for the private lock) is enough, there is no need to *_lock_irqsave().

Quoted 61 lines

---
Cc: George Dunlap <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Jan Beulich <[email protected]>
---
Changes from v3:
* instead of adding locking, get rid of __runq_remove(), and add an ASSERT() about vCPU not being in runq already, as suggested during review.

Changes from the other series:
* split the patch (wrt the original patch, in the original series), and take care, in this one, only of remove_vcpu();
* removed pointless parentheses.
---
The fact that vCPU can't be in runqueue when calling remove_vcpu() is true for other schedulers as well. In them, though, there isn't any race condition to fix. Therefore, taking care of the other schedulers will happen in a followup series.

---
 xen/common/sched_credit.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
xen/common/sched_credit.c +4 -7
index 1b30e67..6dfcff6 100644
@@ -934,28 +934,25 @@ csched_vcpu_remove(const struct scheduler *ops, struct vcpu *vc)
     struct csched_private *prv = CSCHED_PRIV(ops);
     struct csched_vcpu * const svc = CSCHED_VCPU(vc);
     struct csched_dom * const sdom = svc->sdom;
-    unsigned long flags;
 
     SCHED_STAT_CRANK(vcpu_remove);
 
+    ASSERT(!__vcpu_on_runq(svc));
+
     if ( test_and_clear_bit(CSCHED_FLAG_VCPU_PARKED, &svc->flags) )
     {
         SCHED_STAT_CRANK(vcpu_unpark);
         vcpu_unpause(svc->vcpu);
     }
 
-    if ( __vcpu_on_runq(svc) )
-        __runq_remove(svc);
-
-    spin_lock_irqsave(&(prv->lock), flags);
+    spin_lock_irq(&prv->lock);
 
     if ( !list_empty(&svc->active_vcpu_elem) )
         __csched_vcpu_acct_stop_locked(prv, svc);
 
-    spin_unlock_irqrestore(&(prv->lock), flags);
+    spin_unlock_irq(&prv->lock);
 
     BUG_ON( sdom == NULL );
-    BUG_ON( !list_empty(&svc->runq_elem) );
 }
 
 static void
#3 lore raw

PATCH v4 2/6 xen: sched: fix locking for insert_vcpu() in credit1 and RTDS

In reply to Dario Faggioli

The insert_vcpu() hook is handled with inconsistent locking. In fact, schedule_cpu_switch() calls the hook with runqueue lock held, while sched_move_domain() relies on the hook implementations to take the lock themselves (and, since that is not done in Credit1 and RTDS, such operation is not safe in those cases).

This is fixed as follows:
- take the lock in the hook implementations, in specific schedulers' code;
- avoid calling insert_vcpu(), for the idle vCPU, in schedule_cpu_switch(). In fact, idle vCPUs are set to run immediately, and the various schedulers won't insert them in their runqueues anyway, even when explicitly asked to.

While there, still in schedule_cpu_switch(), locking with _irq() is enough (there's no need to do *_irqsave()).

---
Cc: George Dunlap <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Jan Beulich <[email protected]>
---
Cahnges from v2:
* locking in schedule_cpu_switch() is left in place (but turned to just _irq(), instead than *_irqsave());
* call to insert_vcpu() in schedule_cpu_switch() is removed in this patch (rather than later in the series).

Changes from v1 (of this series):
* in Credit1, the lock wants to be an _irqsave() one. If not, the ASSERT() in _spin_lock_irq() will trigger when the hook is called, during boot, from sched_init_vcpu();
* reprhased the changelog (to be less verbose);
* add a few words, in the changelog, about why it is safe to get rid of the locking in schedule_cpu_switch(). Proper commentary and ASSERT()-s about that will come in another patch.

Changes from the other series:
* split the patch (wrt the original patch, in the original series), and take care, in this one, only of insert_vcpu();

---
 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----
 3 files changed, 11 insertions(+), 4 deletions(-)
xen/common/sched_credit.c +6 -0
index 6dfcff6..0e26986 100644
@@ -911,10 +911,16 @@ static void
 csched_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct csched_vcpu *svc = vc->sched_priv;
+    spinlock_t *lock;
+    unsigned long flags;
+
+    lock = vcpu_schedule_lock_irqsave(vc, &flags);
 
     if ( !__vcpu_on_runq(svc) && vcpu_runnable(vc) && !vc->is_running )
         __runq_insert(vc->processor, svc);
 
+    vcpu_schedule_unlock_irqrestore(lock, flags, vc);
+
     SCHED_STAT_CRANK(vcpu_insert);
 }
 
xen/common/sched_rt.c +3 -0
index 822f23c..3a66c9a 100644
@@ -622,16 +622,19 @@ rt_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct rt_vcpu *svc = rt_vcpu(vc);
     s_time_t now = NOW();
+    spinlock_t *lock;
 
     /* not addlocate idle vcpu to dom vcpu list */
     if ( is_idle_vcpu(vc) )
         return;
 
+    lock = vcpu_schedule_lock_irq(vc);
     if ( now >= svc->cur_deadline )
         rt_update_deadline(now, svc);
 
     if ( !__vcpu_on_q(svc) && vcpu_runnable(vc) && !vc->is_running )
         __runq_insert(ops, svc);
+    vcpu_schedule_unlock_irq(lock, vc);
 
     /* add rt_vcpu svc to scheduler-specific vcpu list of the dom */
     list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
xen/common/schedule.c +2 -4
index 292e9a0..88e456f 100644
@@ -1488,7 +1488,6 @@ void __init scheduler_init(void)
 
 int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
 {
-    unsigned long flags;
     struct vcpu *idle;
     spinlock_t *lock;
     void *ppriv, *ppriv_old, *vpriv, *vpriv_old;
@@ -1509,7 +1508,7 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
         return -ENOMEM;
     }
 
-    lock = pcpu_schedule_lock_irqsave(cpu, &flags);
+    lock = pcpu_schedule_lock_irq(cpu);
 
     SCHED_OP(old_ops, tick_suspend, cpu);
     vpriv_old = idle->sched_priv;
@@ -1518,9 +1517,8 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
     ppriv_old = per_cpu(schedule_data, cpu).sched_priv;
     per_cpu(schedule_data, cpu).sched_priv = ppriv;
     SCHED_OP(new_ops, tick_resume, cpu);
-    SCHED_OP(new_ops, insert_vcpu, idle);
 
-    pcpu_schedule_unlock_irqrestore(lock, flags, cpu);
+    pcpu_schedule_unlock_irq(lock, cpu);
 
     SCHED_OP(old_ops, free_vdata, vpriv_old);
     SCHED_OP(old_ops, free_pdata, ppriv_old, cpu);
Reviewed-by on v4 2/6
#4 lore raw

Re: [PATCH v4 2/6] xen: sched: fix locking for insert_vcpu() in credit1 and RTDS

Quoted 15 lines · Dario Faggioli

The insert_vcpu() hook is handled with inconsistent locking. In fact, schedule_cpu_switch() calls the hook with runqueue lock held, while sched_move_domain() relies on the hook implementations to take the lock themselves (and, since that is not done in Credit1 and RTDS, such operation is not safe in those cases).

This is fixed as follows:
- take the lock in the hook implementations, in specific schedulers' code;
- avoid calling insert_vcpu(), for the idle vCPU, in schedule_cpu_switch(). In fact, idle vCPUs are set to run immediately, and the various schedulers won't insert them in their runqueues anyway, even when explicitly asked to.

Quoted 5 lines

While there, still in schedule_cpu_switch(), locking with _irq() is enough (there's no need to do *_irqsave()).

Quoted 113 lines

---
Cc: George Dunlap <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Jan Beulich <[email protected]>
---
Cahnges from v2:
* locking in schedule_cpu_switch() is left in place (but turned to just _irq(), instead than *_irqsave());
* call to insert_vcpu() in schedule_cpu_switch() is removed in this patch (rather than later in the series).

Changes from v1 (of this series):
* in Credit1, the lock wants to be an _irqsave() one. If not, the ASSERT() in _spin_lock_irq() will trigger when the hook is called, during boot, from sched_init_vcpu();
* reprhased the changelog (to be less verbose);
* add a few words, in the changelog, about why it is safe to get rid of the locking in schedule_cpu_switch(). Proper commentary and ASSERT()-s about that will come in another patch.

Changes from the other series:
* split the patch (wrt the original patch, in the original series), and take care, in this one, only of insert_vcpu();

---
 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----
 3 files changed, 11 insertions(+), 4 deletions(-)
xen/common/sched_credit.c +6 -0
index 6dfcff6..0e26986 100644
@@ -911,10 +911,16 @@ static void
 csched_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct csched_vcpu *svc = vc->sched_priv;
+    spinlock_t *lock;
+    unsigned long flags;
+
+    lock = vcpu_schedule_lock_irqsave(vc, &flags);
 
     if ( !__vcpu_on_runq(svc) && vcpu_runnable(vc) && !vc->is_running )
         __runq_insert(vc->processor, svc);
 
+    vcpu_schedule_unlock_irqrestore(lock, flags, vc);
+
     SCHED_STAT_CRANK(vcpu_insert);
 }
 
xen/common/sched_rt.c +3 -0
index 822f23c..3a66c9a 100644
@@ -622,16 +622,19 @@ rt_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct rt_vcpu *svc = rt_vcpu(vc);
     s_time_t now = NOW();
+    spinlock_t *lock;
 
     /* not addlocate idle vcpu to dom vcpu list */
     if ( is_idle_vcpu(vc) )
         return;
 
+    lock = vcpu_schedule_lock_irq(vc);
     if ( now >= svc->cur_deadline )
         rt_update_deadline(now, svc);
 
     if ( !__vcpu_on_q(svc) && vcpu_runnable(vc) && !vc->is_running )
         __runq_insert(ops, svc);
+    vcpu_schedule_unlock_irq(lock, vc);
 
     /* add rt_vcpu svc to scheduler-specific vcpu list of the dom */
     list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
xen/common/schedule.c +2 -4
index 292e9a0..88e456f 100644
@@ -1488,7 +1488,6 @@ void __init scheduler_init(void)
 
 int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
 {
-    unsigned long flags;
     struct vcpu *idle;
     spinlock_t *lock;
     void *ppriv, *ppriv_old, *vpriv, *vpriv_old;
@@ -1509,7 +1508,7 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
         return -ENOMEM;
     }
 
-    lock = pcpu_schedule_lock_irqsave(cpu, &flags);
+    lock = pcpu_schedule_lock_irq(cpu);
 
     SCHED_OP(old_ops, tick_suspend, cpu);
     vpriv_old = idle->sched_priv;
@@ -1518,9 +1517,8 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
     ppriv_old = per_cpu(schedule_data, cpu).sched_priv;
     per_cpu(schedule_data, cpu).sched_priv = ppriv;
     SCHED_OP(new_ops, tick_resume, cpu);
-    SCHED_OP(new_ops, insert_vcpu, idle);
 
-    pcpu_schedule_unlock_irqrestore(lock, flags, cpu);
+    pcpu_schedule_unlock_irq(lock, cpu);
 
     SCHED_OP(old_ops, free_vdata, vpriv_old);
     SCHED_OP(old_ops, free_pdata, ppriv_old, cpu);

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#5 lore raw

PATCH v4 3/6 xen: sched: clarify use cases of schedule_cpu_switch()

In reply to Dario Faggioli

schedule_cpu_switch() is meant to be only used for moving pCPUs from a cpupool to no cpupool, and from there back to a cpupool, *not* to move them directly from one cpupool to another.

This is something inherent to the way the function is implemented and called, but is not that clear, just by the look of it.

Make it more evident by:
- adding commentary and ASSERT()s;
- update the cpupool per-CPU variable (mapping pCPUs to pools) directly in schedule_cpu_switch(), rather than in various places in cpupool.c.

---
Cc: Jan Beulich <[email protected]>
---
Changes from v2:
* updating of per_cpu(cpupool, cpu) is now done in schedule_cpu_switch(), as suggested during review.

Changes from v1:
* new patch, was not there in v1;

---
 xen/common/cpupool.c  |    7 -------
 xen/common/schedule.c |   31 ++++++++++++++++++++++++++++++-
 2 files changed, 30 insertions(+), 8 deletions(-)
xen/common/cpupool.c +0 -7
index e79850b..8e7b723 100644
@@ -261,19 +261,13 @@ int cpupool_move_domain(struct domain *d, struct cpupool *c)
 static int cpupool_assign_cpu_locked(struct cpupool *c, unsigned int cpu)
 {
     int ret;
-    struct cpupool *old;
     struct domain *d;
 
     if ( (cpupool_moving_cpu == cpu) && (c != cpupool_cpu_moving) )
         return -EBUSY;
-    old = per_cpu(cpupool, cpu);
-    per_cpu(cpupool, cpu) = c;
     ret = schedule_cpu_switch(cpu, c);
     if ( ret )
-    {
-        per_cpu(cpupool, cpu) = old;
         return ret;
-    }
 
     cpumask_clear_cpu(cpu, &cpupool_free_cpus);
     if (cpupool_moving_cpu == cpu)
@@ -326,7 +320,6 @@ static long cpupool_unassign_cpu_helper(void *info)
             cpumask_clear_cpu(cpu, &cpupool_free_cpus);
             goto out;
         }
-        per_cpu(cpupool, cpu) = NULL;
         cpupool_moving_cpu = -1;
         cpupool_put(cpupool_cpu_moving);
         cpupool_cpu_moving = NULL;
xen/common/schedule.c +30 -1
index 88e456f..1512d79 100644
@@ -1486,6 +1486,17 @@ void __init scheduler_init(void)
         BUG();
 }
 
+/*
+ * Move a pCPU outside of the influence of the scheduler of its current
+ * cpupool, or subject it to the scheduler of a new cpupool.
+ *
+ * For the pCPUs that are removed from their cpupool, their scheduler becomes
+ * &ops (the default scheduler, selected at boot, which also services the
+ * default cpupool). However, as these pCPUs are not really part of any pool,
+ * there won't be any scheduling event on them, not even from the default
+ * scheduler. Basically, they will just sit idle until they are explicitly
+ * added back to a cpupool.
+ */
 int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
 {
     struct vcpu *idle;
@@ -1493,9 +1504,24 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
     void *ppriv, *ppriv_old, *vpriv, *vpriv_old;
     struct scheduler *old_ops = per_cpu(scheduler, cpu);
     struct scheduler *new_ops = (c == NULL) ? &ops : c->sched;
+    struct cpupool *old_pool = per_cpu(cpupool, cpu);
+
+    /*
+     * pCPUs only move from a valid cpupool to free (i.e., out of any pool),
+     * or from free to a valid cpupool. In the former case (which happens when
+     * c is NULL), we want the CPU to have been marked as free already, as
+     * well as to not be valid for the source pool any longer, when we get to
+     * here. In the latter case (which happens when c is a valid cpupool), we
+     * want the CPU to still be marked as free, as well as to not yet be valid
+     * for the destination pool.
+     */
+    ASSERT(c != old_pool && (c != NULL || old_pool != NULL));
+    ASSERT(cpumask_test_cpu(cpu, &cpupool_free_cpus));
+    ASSERT((c == NULL && !cpumask_test_cpu(cpu, old_pool->cpu_valid)) ||
+           (c != NULL && !cpumask_test_cpu(cpu, c->cpu_valid)));
 
     if ( old_ops == new_ops )
-        return 0;
+        goto out;
 
     idle = idle_vcpu[cpu];
     ppriv = SCHED_OP(new_ops, alloc_pdata, cpu);
@@ -1523,6 +1549,9 @@ int schedule_cpu_switch(unsigned int cpu, struct cpupool *c)
     SCHED_OP(old_ops, free_vdata, vpriv_old);
     SCHED_OP(old_ops, free_pdata, ppriv_old, cpu);
 
+ out:
+    per_cpu(cpupool, cpu) = c;
+
     return 0;
 }
#6 lore raw

PATCH v4 4/6 xen: sched: better handle (not) inserting idle vCPUs in runqueues

In reply to Dario Faggioli

Idle vCPUs are set to run immediately, as a part of their own initialization, so we shouldn't even try to put them in a runqueue. In fact, no scheduler does that, even when asked to (that is rather explicit in Credit2 and RTDS, a bit less evident in Credit1).

Let's make things look as follows:
- in generic code, explicitly avoid even trying to insert idle vCPUs in runqueues;
- in specific schedulers' code, enforce that.

Note that, as csched_vcpu_insert() is no longer being called, during boot (from sched_init_vcpu()) we can safely avoid saving the flags when taking the runqueue lock.

---
Changes from v1:
* changelog: updated and made a little bit less verbose.

---
 xen/common/sched_credit.c  |    7 ++++---
 xen/common/sched_credit2.c |   25 ++++++++++---------------
 xen/common/sched_rt.c      |    4 +---
 xen/common/schedule.c      |   20 +++++++++++---------
 4 files changed, 26 insertions(+), 30 deletions(-)
xen/common/sched_credit.c +4 -3
index 0e26986..021a9dd 100644
@@ -912,14 +912,15 @@ csched_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct csched_vcpu *svc = vc->sched_priv;
     spinlock_t *lock;
-    unsigned long flags;
 
-    lock = vcpu_schedule_lock_irqsave(vc, &flags);
+    BUG_ON( is_idle_vcpu(vc) );
+
+    lock = vcpu_schedule_lock_irq(vc);
 
     if ( !__vcpu_on_runq(svc) && vcpu_runnable(vc) && !vc->is_running )
         __runq_insert(vc->processor, svc);
 
-    vcpu_schedule_unlock_irqrestore(lock, flags, vc);
+    vcpu_schedule_unlock_irq(lock, vc);
 
     SCHED_STAT_CRANK(vcpu_insert);
 }
xen/common/sched_credit2.c +10 -15
index fc51a75..556ca0f 100644
@@ -868,30 +868,25 @@ csched2_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 {
     struct csched2_vcpu *svc = vc->sched_priv;
     struct csched2_dom * const sdom = svc->sdom;
+    spinlock_t *lock;
 
     printk("%s: Inserting %pv\n", __func__, vc);
 
-    /* NB: On boot, idle vcpus are inserted before alloc_pdata() has
-     * been called for that cpu.
-     */
-    if ( ! is_idle_vcpu(vc) )
-    {
-        spinlock_t *lock;
+    BUG_ON(is_idle_vcpu(vc));
 
-        /* FIXME: Do we need the private lock here? */
-        list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
+    /* FIXME: Do we need the private lock here? */
+    list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
 
-        /* Add vcpu to runqueue of initial processor */
-        lock = vcpu_schedule_lock_irq(vc);
+    /* Add vcpu to runqueue of initial processor */
+    lock = vcpu_schedule_lock_irq(vc);
 
-        runq_assign(ops, vc);
+    runq_assign(ops, vc);
 
-        vcpu_schedule_unlock_irq(lock, vc);
+    vcpu_schedule_unlock_irq(lock, vc);
 
-        sdom->nr_vcpus++;
+    sdom->nr_vcpus++;
 
-        SCHED_STAT_CRANK(vcpu_insert);
-    }
+    SCHED_STAT_CRANK(vcpu_insert);
 
     CSCHED2_VCPU_CHECK(vc);
 }
xen/common/sched_rt.c +1 -3
index 3a66c9a..cbe7b17 100644
@@ -624,9 +624,7 @@ rt_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
     s_time_t now = NOW();
     spinlock_t *lock;
 
-    /* not addlocate idle vcpu to dom vcpu list */
-    if ( is_idle_vcpu(vc) )
-        return;
+    BUG_ON( is_idle_vcpu(vc) );
 
     lock = vcpu_schedule_lock_irq(vc);
     if ( now >= svc->cur_deadline )
xen/common/schedule.c +11 -9
index 1512d79..e3582d1 100644
@@ -240,20 +240,22 @@ int sched_init_vcpu(struct vcpu *v, unsigned int processor)
     init_timer(&v->poll_timer, poll_timer_fn,
                v, v->processor);
 
-    /* Idle VCPUs are scheduled immediately. */
+    v->sched_priv = SCHED_OP(DOM2OP(d), alloc_vdata, v, d->sched_priv);
+    if ( v->sched_priv == NULL )
+        return 1;
+
+    TRACE_2D(TRC_SCHED_DOM_ADD, v->domain->domain_id, v->vcpu_id);
+
+    /* Idle VCPUs are scheduled immediately, so don't put them in runqueue. */
     if ( is_idle_domain(d) )
     {
         per_cpu(schedule_data, v->processor).curr = v;
         v->is_running = 1;
     }
-
-    TRACE_2D(TRC_SCHED_DOM_ADD, v->domain->domain_id, v->vcpu_id);
-
-    v->sched_priv = SCHED_OP(DOM2OP(d), alloc_vdata, v, d->sched_priv);
-    if ( v->sched_priv == NULL )
-        return 1;
-
-    SCHED_OP(DOM2OP(d), insert_vcpu, v);
+    else
+    {
+        SCHED_OP(DOM2OP(d), insert_vcpu, v);
+    }
 
     return 0;
 }
#7 lore raw

PATCH v4 5/6 xen: sched: get rid of the per domain vCPU list in RTDS

In reply to Dario Faggioli

As, curently, there is no reason for bothering having it and keeping it updated.

In fact, it is only used for dumping and changing vCPUs parameters, but that can be achieved easily with for_each_vcpu.

While there, take care of the case when XEN_DOMCTL_SCHEDOP_getinfo is called but no vCPUs have been allocated yet (by returning the default scheduling parameters).

---
Cc: George Dunlap <[email protected]>
Cc: Andrew Cooper <[email protected]>
---
Changes from v1:
* address the case when d->vcpu[] has not been allocated yet, as requested during review;
* style: space before brackets of for_each_vcpu, as requested during review;
* used 'v' instead of 'vc' for 'vcpu' (in new code).

---
 xen/common/sched_rt.c |   54 ++++++++++++++++++++++++-------------------------
 1 file changed, 26 insertions(+), 28 deletions(-)
xen/common/sched_rt.c +26 -28
index cbe7b17..3f1d047 100644
@@ -160,7 +160,6 @@ struct rt_private {
  */
 struct rt_vcpu {
     struct list_head q_elem;    /* on the runq/depletedq list */
-    struct list_head sdom_elem; /* on the domain VCPU list */
 
     /* Up-pointers */
     struct rt_dom *sdom;
@@ -182,7 +181,6 @@ struct rt_vcpu {
  * Domain
  */
 struct rt_dom {
-    struct list_head vcpu;      /* link its VCPUs */
     struct list_head sdom_elem; /* link list on rt_priv */
     struct domain *dom;         /* pointer to upper domain */
 };
@@ -290,7 +288,7 @@ rt_dump_pcpu(const struct scheduler *ops, int cpu)
 static void
 rt_dump(const struct scheduler *ops)
 {
-    struct list_head *iter_sdom, *iter_svc, *runq, *depletedq, *iter;
+    struct list_head *runq, *depletedq, *iter;
     struct rt_private *prv = rt_priv(ops);
     struct rt_vcpu *svc;
     struct rt_dom *sdom;
@@ -319,14 +317,16 @@ rt_dump(const struct scheduler *ops)
     }
 
     printk("Domain info:\n");
-    list_for_each( iter_sdom, &prv->sdom )
+    list_for_each( iter, &prv->sdom )
     {
-        sdom = list_entry(iter_sdom, struct rt_dom, sdom_elem);
+        struct vcpu *v;
+
+        sdom = list_entry(iter, struct rt_dom, sdom_elem);
         printk("\tdomain: %d\n", sdom->dom->domain_id);
 
-        list_for_each( iter_svc, &sdom->vcpu )
+        for_each_vcpu ( sdom->dom, v )
         {
-            svc = list_entry(iter_svc, struct rt_vcpu, sdom_elem);
+            svc = rt_vcpu(v);
             rt_dump_vcpu(ops, svc);
         }
     }
@@ -527,7 +527,6 @@ rt_alloc_domdata(const struct scheduler *ops, struct domain *dom)
     if ( sdom == NULL )
         return NULL;
 
-    INIT_LIST_HEAD(&sdom->vcpu);
     INIT_LIST_HEAD(&sdom->sdom_elem);
     sdom->dom = dom;
 
@@ -587,7 +586,6 @@ rt_alloc_vdata(const struct scheduler *ops, struct vcpu *vc, void *dd)
         return NULL;
 
     INIT_LIST_HEAD(&svc->q_elem);
-    INIT_LIST_HEAD(&svc->sdom_elem);
     svc->flags = 0U;
     svc->sdom = dd;
     svc->vcpu = vc;
@@ -614,8 +612,7 @@ rt_free_vdata(const struct scheduler *ops, void *priv)
  * This function is called in sched_move_domain() in schedule.c
  * When move a domain to a new cpupool.
  * It inserts vcpus of moving domain to the scheduler's RunQ in
- * dest. cpupool; and insert rt_vcpu svc to scheduler-specific
- * vcpu list of the dom
+ * dest. cpupool.
  */
 static void
 rt_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
@@ -634,15 +631,11 @@ rt_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
         __runq_insert(ops, svc);
     vcpu_schedule_unlock_irq(lock, vc);
 
-    /* add rt_vcpu svc to scheduler-specific vcpu list of the dom */
-    list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
-
     SCHED_STAT_CRANK(vcpu_insert);
 }
 
 /*
- * Remove rt_vcpu svc from the old scheduler in source cpupool; and
- * Remove rt_vcpu svc from scheduler-specific vcpu list of the dom
+ * Remove rt_vcpu svc from the old scheduler in source cpupool.
  */
 static void
 rt_vcpu_remove(const struct scheduler *ops, struct vcpu *vc)
@@ -659,9 +652,6 @@ rt_vcpu_remove(const struct scheduler *ops, struct vcpu *vc)
     if ( __vcpu_on_q(svc) )
         __q_remove(svc);
     vcpu_schedule_unlock_irq(lock, vc);
-
-    if ( !is_idle_vcpu(vc) )
-        list_del_init(&svc->sdom_elem);
 }
 
 /*
@@ -1135,20 +1125,28 @@ rt_dom_cntl(
     struct xen_domctl_scheduler_op *op)
 {
     struct rt_private *prv = rt_priv(ops);
-    struct rt_dom * const sdom = rt_dom(d);
     struct rt_vcpu *svc;
-    struct list_head *iter;
+    struct vcpu *v;
     unsigned long flags;
     int rc = 0;
 
     switch ( op->cmd )
     {
     case XEN_DOMCTL_SCHEDOP_getinfo:
-        spin_lock_irqsave(&prv->lock, flags);
-        svc = list_entry(sdom->vcpu.next, struct rt_vcpu, sdom_elem);
-        op->u.rtds.period = svc->period / MICROSECS(1); /* transfer to us */
-        op->u.rtds.budget = svc->budget / MICROSECS(1);
-        spin_unlock_irqrestore(&prv->lock, flags);
+        if ( d->max_vcpus > 0 )
+        {
+            spin_lock_irqsave(&prv->lock, flags);
+            svc = rt_vcpu(d->vcpu[0]);
+            op->u.rtds.period = svc->period / MICROSECS(1);
+            op->u.rtds.budget = svc->budget / MICROSECS(1);
+            spin_unlock_irqrestore(&prv->lock, flags);
+        }
+        else
+        {
+            /* If we don't have vcpus yet, let's just return the defaults. */
+            op->u.rtds.period = RTDS_DEFAULT_PERIOD;
+            op->u.rtds.budget = RTDS_DEFAULT_BUDGET;
+        }
         break;
     case XEN_DOMCTL_SCHEDOP_putinfo:
         if ( op->u.rtds.period == 0 || op->u.rtds.budget == 0 )
@@ -1157,9 +1155,9 @@ rt_dom_cntl(
             break;
         }
         spin_lock_irqsave(&prv->lock, flags);
-        list_for_each( iter, &sdom->vcpu )
+        for_each_vcpu ( d, v )
         {
-            svc = list_entry(iter, struct rt_vcpu, sdom_elem);
+            svc = rt_vcpu(v);
             svc->period = MICROSECS(op->u.rtds.period); /* transfer to nanosec */
             svc->budget = MICROSECS(op->u.rtds.budget);
         }
#8 lore raw

PATCH v4 6/6 xen: sched: get rid of the per domain vCPU list in Credit2

In reply to Dario Faggioli

As, curently, there is no reason for bothering having it and keeping it updated.

In fact, it is only used for dumping and changing vCPUs parameters, but that can be achieved easily with for_each_vcpu.

While there, improve alignment of comments, ad add a const qualifier to a pointer, making things more consistent with what happens everywhere else in the source file.

This also allows us to kill one of the remaining FIXMEs in the code, which is always good.

---
Cc: Andrew Cooper <[email protected]>
---
Changes from v1:
* removed spurious hunk about sched_rt.c, as noted during review;
* fixed the BUG_ON inside csched2_dom_destroy(), as noted during review;
* used 'v' instead of 'vc' for 'vcpu' (in new code), as suggested during review.

---
 xen/common/sched_credit2.c |   34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)
xen/common/sched_credit2.c +11 -23
index 556ca0f..3c49ffa 100644
@@ -234,9 +234,8 @@ struct csched2_private {
  * Virtual CPU
  */
 struct csched2_vcpu {
-    struct list_head rqd_elem;  /* On the runqueue data list */
-    struct list_head sdom_elem; /* On the domain vcpu list */
-    struct list_head runq_elem; /* On the runqueue         */
+    struct list_head rqd_elem;         /* On the runqueue data list  */
+    struct list_head runq_elem;        /* On the runqueue            */
     struct csched2_runqueue_data *rqd; /* Up-pointer to the runqueue */
 
     /* Up-pointers */
@@ -261,7 +260,6 @@ struct csched2_vcpu {
  * Domain
  */
 struct csched2_dom {
-    struct list_head vcpu;
     struct list_head sdom_elem;
     struct domain *dom;
     uint16_t weight;
@@ -770,7 +768,6 @@ csched2_alloc_vdata(const struct scheduler *ops, struct vcpu *vc, void *dd)
         return NULL;
 
     INIT_LIST_HEAD(&svc->rqd_elem);
-    INIT_LIST_HEAD(&svc->sdom_elem);
     INIT_LIST_HEAD(&svc->runq_elem);
 
     svc->sdom = dd;
@@ -874,9 +871,6 @@ csched2_vcpu_insert(const struct scheduler *ops, struct vcpu *vc)
 
     BUG_ON(is_idle_vcpu(vc));
 
-    /* FIXME: Do we need the private lock here? */
-    list_add_tail(&svc->sdom_elem, &svc->sdom->vcpu);
-
     /* Add vcpu to runqueue of initial processor */
     lock = vcpu_schedule_lock_irq(vc);
 
@@ -921,10 +915,6 @@ csched2_vcpu_remove(const struct scheduler *ops, struct vcpu *vc)
 
         vcpu_schedule_unlock_irq(lock, vc);
 
-        /* Remove from sdom list.  Don't need a lock for this, as it's called
-         * syncronously when nothing else can happen. */
-        list_del_init(&svc->sdom_elem);
-
         svc->sdom->nr_vcpus--;
     }
 }
@@ -1441,7 +1431,7 @@ csched2_dom_cntl(
 
         if ( op->u.credit2.weight != 0 )
         {
-            struct list_head *iter;
+            struct vcpu *v;
             int old_weight;
 
             old_weight = sdom->weight;
@@ -1449,9 +1439,9 @@ csched2_dom_cntl(
             sdom->weight = op->u.credit2.weight;
 
             /* Update weights for vcpus, and max_weight for runqueues on which they reside */
-            list_for_each ( iter, &sdom->vcpu )
+            for_each_vcpu ( d, v )
             {
-                struct csched2_vcpu *svc = list_entry(iter, struct csched2_vcpu, sdom_elem);
+                struct csched2_vcpu *svc = CSCHED2_VCPU(v);
 
                 /* NB: Locking order is important here.  Because we grab this lock here, we
                  * must never lock csched2_priv.lock if we're holding a runqueue lock.
@@ -1485,7 +1475,6 @@ csched2_alloc_domdata(const struct scheduler *ops, struct domain *dom)
         return NULL;
 
     /* Initialize credit and weight */
-    INIT_LIST_HEAD(&sdom->vcpu);
     INIT_LIST_HEAD(&sdom->sdom_elem);
     sdom->dom = dom;
     sdom->weight = CSCHED2_DEFAULT_WEIGHT;
@@ -1537,9 +1526,7 @@ csched2_free_domdata(const struct scheduler *ops, void *data)
 static void
 csched2_dom_destroy(const struct scheduler *ops, struct domain *dom)
 {
-    struct csched2_dom *sdom = CSCHED2_DOM(dom);
-
-    BUG_ON(!list_empty(&sdom->vcpu));
+    BUG_ON(CSCHED2_DOM(dom)->nr_vcpus > 0);
 
     csched2_free_domdata(ops, CSCHED2_DOM(dom));
 }
@@ -1879,7 +1866,7 @@ csched2_dump_pcpu(const struct scheduler *ops, int cpu)
 static void
 csched2_dump(const struct scheduler *ops)
 {
-    struct list_head *iter_sdom, *iter_svc;
+    struct list_head *iter_sdom;
     struct csched2_private *prv = CSCHED2_PRIV(ops);
     unsigned long flags;
     int i, loop;
@@ -1924,6 +1911,8 @@ csched2_dump(const struct scheduler *ops)
     list_for_each( iter_sdom, &prv->sdom )
     {
         struct csched2_dom *sdom;
+        struct vcpu *v;
+
         sdom = list_entry(iter_sdom, struct csched2_dom, sdom_elem);
 
         printk("\tDomain: %d w %d v %d\n",
@@ -1931,12 +1920,11 @@ csched2_dump(const struct scheduler *ops)
                sdom->weight,
                sdom->nr_vcpus);
 
-        list_for_each( iter_svc, &sdom->vcpu )
+        for_each_vcpu( sdom->dom, v )
         {
-            struct csched2_vcpu *svc;
+            struct csched2_vcpu * const svc = CSCHED2_VCPU(v);
             spinlock_t *lock;
 
-            svc = list_entry(iter_svc, struct csched2_vcpu, sdom_elem);
             lock = vcpu_schedule_lock(svc->vcpu);
 
             printk("\t%3d: ", ++loop);
#9 lore raw
In reply to Dario Faggioli
Quoted 16 lines · Dario Faggioli

Hi,

This series, improves how inserting vCPUs in schedulers runqueues is done, including fixing a couple of bugs, and paving the way for more improvement in Credit2 runqueue handling (will be submitted as a separate series).

v3 is here:
http://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03278.html
Message-Id: <[email protected]>

Only patch 1 really changed from v3, and patches 1 and 2 are the only one that seem to me to be missing suitable Ack-s.

There is a git branch for this series here:
git://xenbits.xen.org/people/dariof/xen.git rel/sched/fix-vcpu-ins-rem-v4

Quoted 10 lines

Regards,
Dario
---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

Committers,

It looks to me like this series has all the Acks and Reviews it needs to be checked in, but (as far as I can see) hasn't yet. Can someone double-check and check it in? (See the git tree above if you want to make it easier.)

Thanks,
-George

#10 lore raw
Quoted 10 lines
Quoted 9 lines
Quoted 1 line · On 23.11.15 at 15:03, <[email protected]> wrote:

---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

Quoted 6 lines

Committers,

It looks to me like this series has all the Acks and Reviews it needs to be checked in, but (as far as I can see) hasn't yet. Can someone double-check and check it in? (See the git tree above if you want to make it easier.)

I've been waiting for an ack on patch 2 (and I've just checked again and still can't find any); with this diffstat

 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----

Meng's alone isn't sufficient afaict. I've once made an attempt to commit later patches in this series, but failed and then didn't want to waste time retrying.

Jan

#11 lore raw
Quoted 20 lines · Jan Beulich
Quoted 10 lines
Quoted 9 lines
Quoted 1 line · On 23.11.15 at 15:03, <[email protected]> wrote:

---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

Quoted 6 lines

Committers,

It looks to me like this series has all the Acks and Reviews it needs to be checked in, but (as far as I can see) hasn't yet. Can someone double-check and check it in? (See the git tree above if you want to make it easier.)

I've been waiting for an ack on patch 2 (and I've just checked again and still can't find any); with this diffstat

Quoted 7 lines
 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----

Meng's alone isn't sufficient afaict. I've once made an attempt to commit later patches in this series, but failed and then didn't want to waste time retrying.

What are the rules again, then? Dario is a scheduler maintainer, and Meng is an established contributor. I thought that was enough.

-George

#12 lore raw
Quoted 26 lines
Quoted 1 line
Quoted 1 line · On 23.11.15 at 15:50, <[email protected]> wrote:
Quoted 24 lines · Jan Beulich
Quoted 10 lines
Quoted 9 lines
Quoted 1 line · On 23.11.15 at 15:03, <[email protected]> wrote:

---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

Quoted 6 lines

Committers,

It looks to me like this series has all the Acks and Reviews it needs to be checked in, but (as far as I can see) hasn't yet. Can someone double-check and check it in? (See the git tree above if you want to make it easier.)

I've been waiting for an ack on patch 2 (and I've just checked again and still can't find any); with this diffstat

 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----
Quoted 6 lines
Quoted 3 lines

Meng's alone isn't sufficient afaict. I've once made an attempt to commit later patches in this series, but failed and then didn't want to waste time retrying.

What are the rules again, then? Dario is a scheduler maintainer, and Meng is an established contributor. I thought that was enough.

My understanding is that patches by maintainers need an ack by another maintainer as long as there is one. When there's none, things become more fuzzy.

Jan

#13 lore raw

If I can jump in the conversion...

2015-11-23 10:00 GMT-05:00 Jan Beulich <[email protected]>:

Quoted 22 lines
Quoted 22 lines
Quoted 1 line
Quoted 1 line · On 23.11.15 at 15:50, <[email protected]> wrote:
Quoted 20 lines · Jan Beulich
Quoted 10 lines
Quoted 9 lines
Quoted 1 line · On 23.11.15 at 15:03, <[email protected]> wrote:

---
Dario Faggioli (6):
xen: sched: fix locking of remove_vcpu() in credit1
xen: sched: fix locking for insert_vcpu() in credit1 and RTDS
xen: sched: clarify use cases of schedule_cpu_switch()
xen: sched: better handle (not) inserting idle vCPUs in runqueues
xen: sched: get rid of the per domain vCPU list in RTDS
xen: sched: get rid of the per domain vCPU list in Credit2

Quoted 6 lines

Committers,

It looks to me like this series has all the Acks and Reviews it needs to be checked in, but (as far as I can see) hasn't yet. Can someone double-check and check it in? (See the git tree above if you want to make it easier.)

I've been waiting for an ack on patch 2 (and I've just checked again and still can't find any); with this diffstat

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
 xen/common/sched_credit.c |    6 ++++++
 xen/common/sched_rt.c     |    3 +++
 xen/common/schedule.c     |    6 ++----

Meng's alone isn't sufficient afaict. I've once made an attempt to commit later patches in this series, but failed and then didn't want to waste time retrying.

Hmm, I can help do some quick tests on the patch. At least, make sure it has no problem in applying on the latest commit point.

Quoted 7 lines
Quoted 3 lines

What are the rules again, then? Dario is a scheduler maintainer, and Meng is an established contributor. I thought that was enough.

My understanding is that patches by maintainers need an ack by another maintainer as long as there is one. When there's none, things become more fuzzy.

I think George is the maintainer for the whole scheduler. If George could ack, it may be enough?

Best,

Meng

-----------
Meng Xu
PhD Student in Computer and Information Science
University of Pennsylvania
http://www.cis.upenn.edu/~mengxu/

#14 lore raw
Quoted 6 lines
Quoted 1 line
Quoted 1 line · On 24.11.15 at 04:27, <[email protected]> wrote:

2015-11-23 10:00 GMT-05:00 Jan Beulich <[email protected]>:

Quoted 4 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line · On 23.11.15 at 15:50, <[email protected]> wrote:

What are the rules again, then? Dario is a scheduler maintainer, and Meng is an established contributor. I thought that was enough.

Quoted 6 lines
Quoted 3 lines

My understanding is that patches by maintainers need an ack by another maintainer as long as there is one. When there's none, things become more fuzzy.

I think George is the maintainer for the whole scheduler. If George could ack, it may be enough?

Yes, that's precisely what I am still waiting for.

Jan

#15 lore raw
In reply to Dario Faggioli
Quoted 10 lines · Dario Faggioli

Hi,

This series, improves how inserting vCPUs in schedulers runqueues is done, including fixing a couple of bugs, and paving the way for more improvement in Credit2 runqueue handling (will be submitted as a separate series).

v3 is here:
http://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03278.html
Message-Id: <[email protected]>

Quoted 5 lines

Only patch 1 really changed from v3, and patches 1 and 2 are the only one that seem to me to be missing suitable Ack-s.

There is a git branch for this series here:
git://xenbits.xen.org/people/dariof/xen.git rel/sched/fix-vcpu-ins-rem-v4

BTW this branch somehow got named "dario/rel/sched/fix-vcpu-ins-rem-v4", if anyone else wants to look for it. :-)

-George

#16 lore raw
Quoted 11 lines · George Dunlap
Quoted 4 lines · Dario Faggioli


There is a git branch for this series here:
 git://xenbits.xen.org/people/dariof/xen.git  rel/sched/fix-vcpu-
ins-rem-v4

BTW this branch somehow got named "dario/rel/sched/fix-vcpu-ins-rem-v4", if anyone else wants to look for it. :-)

Ah, indeed! Sorry for this. :-/

I must have fat fingered something while pushing, and the remote name ended up in the branch name! :-(

Glad you manage to find the branch anyway, and thanks for looking at it.

Regards,
Dario

Signature · 4 lines
<<This happens because I choose it to happen!>> (Raistlin Majere)
-----------------------------------------------------------------
Dario Faggioli, Ph.D, http://about.me/dario.faggioli
Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK)

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel