Skip to contentSkip to conversation

Zynq changes

GIT PULL Michal Simek 2 participants 2 messages Nov 4, 2015

lore
Share & tools
lore
#0 lore raw

Hi Tom,

please pull these patches to your tree. They are enabling DM for Zynq and ZynqMP targets and also they are fixing compilation error which is currently in the tree.
Also as I have promised I am removing zc70x target from u-boot and only zc702 and zc706 will be used.

There will be some others pull request for fixing stuff when they are properly reviewed.

Thanks,
Michal

The following changes since commit 83bf005710a1e01341de5e2f44a3ce082717e313:

arm: at91: reworked meesc board support (2015-11-03 14:21:32 +0100)

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 1e370ef7e7a4fb0b801a848e190c01e06a2fbfce:

ARM: zynq: Remove zc70x target (2015-11-04 14:49:53 +0100)

----------------------------------------------------------------
Michal Simek (3):
ARM: zynqmp: Add DTS for ep108 board
ARM: zynqmp: Enable DM and OF binding
ARM: zynq: Remove zc70x target

Simon Glass (13):
fdt: Add a function to look up a /chosen property
fdt: Correct handling of alias regions
fdtgrep: Simplify the alias generation code
dm: serial: Deal with stdout-path with an alias
dm: spl: Generate u-boot-spl-dtb.bin only when enabled
dm: spl: Support device tree when BSS is in a different section
arm: zynq: Use separate device tree instead of embedded
arm: zynq: Drop unnecessary code in SPL board_init_f()
arm: zynq: Support the debug UART
dm: arm: zynq: Enable device tree control in SPL
arm: zynq: dts: Add U-Boot device tree additions
arm: zynq: serial: Drop non-device-tree serial driver portions
arm: zynq: Move serial driver to driver model

Siva Durga Prasad Paladugu (1):
zynq-common: Define CONFIG_SYS_I2C_ZYNQ based on board config

 Kconfig                            |  10 +++
 arch/arm/Kconfig                   |   7 ++
 arch/arm/dts/Makefile              |   2 +
 arch/arm/dts/zynq-7000.dtsi        |   1 +
 arch/arm/dts/zynq-microzed.dts     |   5 ++
 arch/arm/dts/zynq-picozed.dts      |   5 ++
 arch/arm/dts/zynq-zc702.dts        |   1 +
 arch/arm/dts/zynq-zc706.dts        |   1 +
 arch/arm/dts/zynq-zc770-xm010.dts  |   1 +
 arch/arm/dts/zynq-zc770-xm011.dts  |   1 +
 arch/arm/dts/zynq-zc770-xm012.dts  |   1 +
 arch/arm/dts/zynq-zc770-xm013.dts  |   1 +
 arch/arm/dts/zynq-zed.dts          |   1 +
 arch/arm/dts/zynq-zybo.dts         |   1 +
 arch/arm/dts/zynqmp-ep108-clk.dtsi | 119 +++++++++++++++++++++++++++++++++
 arch/arm/dts/zynqmp-ep108.dts      | 174
++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/zynqmp.dtsi           | 668
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-zynq/Kconfig         |  10 +--
 arch/arm/mach-zynq/spl.c           |  12 ++--
 arch/arm/mach-zynq/u-boot-spl.lds  |  10 ++-
 board/xilinx/zynq/Makefile         |  10 ---
 configs/xilinx_zynqmp_ep_defconfig |   3 +-
 configs/zynq_microzed_defconfig    |   2 +-
 configs/zynq_picozed_defconfig     |   2 +-
 configs/zynq_zc702_defconfig       |   2 +-
 configs/zynq_zc706_defconfig       |   2 +-
 configs/zynq_zc70x_defconfig       |  15 -----
 configs/zynq_zc770_xm010_defconfig |   2 +-
 configs/zynq_zc770_xm011_defconfig |   2 +-
 configs/zynq_zc770_xm012_defconfig |   2 +-
 configs/zynq_zc770_xm013_defconfig |   2 +-
 configs/zynq_zed_defconfig         |   2 +-
 configs/zynq_zybo_defconfig        |   6 +-
 drivers/serial/Kconfig             |   7 ++
 drivers/serial/serial-uclass.c     |  30 +++++++--
 drivers/serial/serial_zynq.c       | 203
++++++++++++++++++++++++++++----------------------------
 include/asm-generic/sections.h     |   1 +
 include/configs/xilinx_zynqmp.h    |   4 +-
 include/configs/xilinx_zynqmp_ep.h |   1 -
 include/configs/zynq-common.h      |   9 ++-
 include/configs/zynq_microzed.h    |   1 -
 include/configs/zynq_picozed.h     |   1 -
 include/configs/zynq_zc70x.h       |   1 -
 include/configs/zynq_zc770.h       |   6 --
 include/configs/zynq_zed.h         |   1 -
 include/configs/zynq_zybo.h        |   1 -
 include/fdtdec.h                   |  11 +++-
 lib/fdtdec.c                       |  22 +++++--
 lib/libfdt/fdt_region.c            |   2 +-
 scripts/Makefile.spl               |   2 +
 tools/fdtgrep.c                    |  32 +++------
 51 files changed, 1212 insertions(+), 206 deletions(-)
 create mode 100644 arch/arm/dts/zynqmp-ep108-clk.dtsi
 create mode 100644 arch/arm/dts/zynqmp-ep108.dts
 create mode 100644 arch/arm/dts/zynqmp.dtsi
 delete mode 100644 configs/zynq_zc70x_defconfig
#1 lore raw
Quoted 19 lines · Michal Simek

Hi Tom,

please pull these patches to your tree. They are enabling DM for Zynq and ZynqMP targets and also they are fixing compilation error which is currently in the tree.
Also as I have promised I am removing zc70x target from u-boot and only zc702 and zc706 will be used.

There will be some others pull request for fixing stuff when they are properly reviewed.

Thanks,
Michal

The following changes since commit 83bf005710a1e01341de5e2f44a3ce082717e313:

arm: at91: reworked meesc board support (2015-11-03 14:21:32 +0100)

Quoted 8 lines

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 1e370ef7e7a4fb0b801a848e190c01e06a2fbfce:

ARM: zynq: Remove zc70x target (2015-11-04 14:49:53 +0100)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151104/73674480/attachment.sig>