Skip to contentSkip to conversation

BUG: DPDK i40e does not work with VFIO

DISCUSSION Stephen Hemminger 2 participants 2 messages Nov 5, 2015 – Nov 6, 2015

lore
Share & tools
lore
#0 lore raw

On my machine, i40e will not startup if using VFIO.

PMD: rte_i40evf_pmd_init(): >>
PMD: rte_i40e_pmd_init(): >>
PMD: eth_i40e_dev_init(): >>
PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has already been disabled
PMD: eth_i40e_dev_init(): Failed to init adminq: -54

The normal Linux driver works correctly. Firmware has been updated to the latest version.

Like my earlier experience with fm10k, I suspect that Intel never tests i40e with IOMMU, and only tested with igb_uio.

#1 lore raw
Quoted 8 lines · On Thu, 5 Nov 2015 09:19:25 -0800 Stephen Hemminger <[email protected]>…

On my machine, i40e will not startup if using VFIO.

PMD: rte_i40evf_pmd_init(): >>
PMD: rte_i40e_pmd_init(): >>
PMD: eth_i40e_dev_init(): >>
PMD: i40e_set_symmetric_hash_enable_per_port(): Symmetric hash has already been disabled
PMD: eth_i40e_dev_init(): Failed to init adminq: -54

Quoted 4 lines

The normal Linux driver works correctly. Firmware has been updated to the latest version.

Like my earlier experience with fm10k, I suspect that Intel never tests i40e with IOMMU, and only tested with igb_uio.

I found the issue. It was a problem with older version of Xen DOM0 patches which were still outstanding in the internal development package.