unicore32: nb0916: Use PWM lookup table
PATCH 1/1 unicore32: nb0916: Use PWM lookup table
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed.
Cc Guan Xuetao <[email protected]>
Signed-off-by Thierry Reding <[email protected]>
--- arch/unicore32/kernel/puv3-nb0916.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
arch/unicore32/kernel/puv3-nb0916.c +8 -1
@@ -19,6 +19,7 @@#include <linux/reboot.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/gpio_keys.h>
@@ -49,8 +50,12 @@ static struct resource puv3_i2c_resources[] = { } }; +static struct pwm_lookup nb0916_pwm_lookup[] = { +PWM_LOOKUP ("PKUnity-v3-PWM" ,0 ,"pwm-backlight" ,NULL ,0 , +PWM_POLARITY_NORMAL ), +}; +static struct platform_pwm_backlight_data nb0916_backlight_data = { - .pwm_id =0 , .max_brightness =100 , .dft_brightness =100 , .pwm_period_ns =70 *1024 ,
@@ -112,6 +117,8 @@ int __init mach_nb0916_init(void)platform_device_register_simple ("PKUnity-v3-I2C" ,-1 , puv3_i2c_resources,ARRAY_SIZE (puv3_i2c_resources)); +pwm_add_table (nb0916_pwm_lookup,ARRAY_SIZE (nb0916_pwm_lookup)); +platform_device_register_data (NULL ,"pwm-backlight" ,-1 , &nb0916_backlight_data,sizeof (nb0916_backlight_data));
Signature · 1 line
2.5.0
Quoted 10 lines · Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed.
Cc Guan Xuetao <[email protected]>Signed-off-by Thierry Reding <[email protected]>--- arch/unicore32/kernel/puv3-nb0916.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
Guan, I've applied this to my PWM tree since you haven't responded to this. The change is low-risk and badly needed to clean up PWM consumer drivers.
Thierry