ixgbe: do not report 2.5 Gbps as supported
Subsystems (2)
PATCH 1/1 ixgbe: do not report 2.5 Gbps as supported
Some X550 devices can connect at 2.5Gbps during fail-over, but only with certain link partners. Also setting the advertised speed will not work so we do not report it as supported to avoid confusion.
--- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +0 -4
@@ -166,8 +166,6 @@ static int ixgbe_get_settings(struct net_device *netdev,/* set the supported link speeds */ if (supported_link &IXGBE_LINK_SPEED_10GB_FULL ) ecmd->supported |= SUPPORTED_10000baseT_Full; -if (supported_link &IXGBE_LINK_SPEED_2_5GB_FULL ) - ecmd->supported |= SUPPORTED_2500baseX_Full;if (supported_link &IXGBE_LINK_SPEED_1GB_FULL ) ecmd->supported |= SUPPORTED_1000baseT_Full;if (supported_link &IXGBE_LINK_SPEED_100_FULL )
@@ -179,8 +177,6 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_100baseT_Full;if (hw->phy.autoneg_advertised &IXGBE_LINK_SPEED_10GB_FULL ) ecmd->advertising |= ADVERTISED_10000baseT_Full; -if (hw->phy.autoneg_advertised &IXGBE_LINK_SPEED_2_5GB_FULL ) - ecmd->advertising |= ADVERTISED_2500baseX_Full;if (hw->phy.autoneg_advertised &IXGBE_LINK_SPEED_1GB_FULL ) ecmd->advertising |= ADVERTISED_1000baseT_Full; }else {
Schmitt
PATCH 1/1 ixgbe: do not report 2.5 Gbps as supported
Quoted 9 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Emil Tantilov
Sent: Friday, November 06, 2015 4:35 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH] ixgbe: do not report 2.5 Gbps as supported
Quoted 5 lines
Some X550 devices can connect at 2.5Gbps during fail-over, but only with certain link partners. Also setting the advertised speed will not work so we do not report it as supported to avoid confusion.
Signed-off-by Emil Tantilov <[email protected]>