board/ti/am335x: beaglebone stop muxing i2c1_pin_mux
PATCH 1/1 board/ti/am335x: beaglebone stop muxing i2c1_pin_mux
On the BeagleBone these i2c1 pins are routed to the expanasion header, where they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1
Signed-off-by Robert Nelson <[email protected]>
Reported-by Matthijs van Duin <[email protected]>
CC Tom Rini <[email protected]>
--- board/ti/am335x/mux.c | 2 -- 1 file changed, 2 deletions(-)
board/ti/am335x/mux.c +0 -2
@@ -317,7 +317,6 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)/* Do board-specific muxes. */ if (board_is_bone (header)) {/* Beaglebone pinmux */ -configure_module_pin_mux (i2c1_pin_mux);configure_module_pin_mux (mii1_pin_mux);configure_module_pin_mux (mmc0_pin_mux);#if defined(CONFIG_NAND )
@@ -356,7 +355,6 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)configure_module_pin_mux (mmc0_pin_mux_sk_evm); }else if (board_is_bone_lt (header)) {/* Beaglebone LT pinmux */ -configure_module_pin_mux (i2c1_pin_mux);configure_module_pin_mux (mii1_pin_mux);configure_module_pin_mux (mmc0_pin_mux);#if defined(CONFIG_NAND ) && defined(CONFIG_EMMC_BOOT )
Signature · 1 line
2.6.1
Quoted 8 lines · robertcnelson at gmail.com
On the BeagleBone these i2c1 pins are routed to the expanasion header, where they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1
Signed-off-by Robert Nelson <[email protected]>Reported-by Matthijs van Duin <[email protected]>CC Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151112/258f6397/attachment.sig>