Skip to contentSkip to conversation

perf x86 intel: Question about pebs_data_source data

RFC In review Jiri Olsa 3 participants 3 messages Nov 9, 2015 – Nov 14, 2015

Subsystems (2)
lore
Share & tools
lore

Jiri Olsa

author
#0 lore raw

RFC 1/1 perf x86 intel: Question about pebs_data_source data

hi,
I was checking with SDM (September 2015) and I'd like if you guys could help me with understanding of following array elements

I'm reffering to Table 18-19. Data Source Encoding for Load Latency Record

- element 5
SDM says:

05H L3 HIT. Local or Remote home requests that hit the L3 cache and was serviced by another processor core with a cross core snoop where no modified copies were found. (clean).

and we have L3 SNOOP MISS:

     OP_LH | P(LVL, L3)  | P(SNOOP, MISS),   /* 0x05: L3 hit, snoop miss */

while the SDM indicates HIT

- element 6
SDM says:

L3 HIT. Local or Remote home requests that hit the L3 cache and was serviced by another processor core with a cross core snoop where modified copies were found. (HITM).

and we have L3 SNOOP HIT:

     OP_LH | P(LVL, L3)  | P(SNOOP, HIT),    /* 0x06: L3 hit, snoop hit */

while the SDM indicates HITM

I'm probably misunderstanding SDM (wouldn't be the first time) what do I miss?

thanks for comments,
jirka

---

arch/x86/kernel/cpu/perf_event_intel_ds.c +2 -2
index 5db1c7755548..000ab82d09e7 100644
@@ -57,8 +57,8 @@ static const u64 pebs_data_source[] = {
 	OP_LH | P(LVL, LFB) | P(SNOOP, NONE),	/* 0x02: LFB hit */
 	OP_LH | P(LVL, L2)  | P(SNOOP, NONE),	/* 0x03: L2 hit */
 	OP_LH | P(LVL, L3)  | P(SNOOP, NONE),	/* 0x04: L3 hit */
-	OP_LH | P(LVL, L3)  | P(SNOOP, MISS),	/* 0x05: L3 hit, snoop miss */
-	OP_LH | P(LVL, L3)  | P(SNOOP, HIT),	/* 0x06: L3 hit, snoop hit */
+	OP_LH | P(LVL, L3)  | P(SNOOP, HIT),	/* 0x05: L3 hit, snoop hit */
+	OP_LH | P(LVL, L3)  | P(SNOOP, HITM),	/* 0x06: L3 hit, snoop hitm */
 	OP_LH | P(LVL, L3)  | P(SNOOP, HITM),	/* 0x07: L3 hit, snoop hitm */
 	OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HIT),  /* 0x08: L3 miss snoop hit */
 	OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HITM), /* 0x09: L3 miss snoop hitm*/
#1 lore raw
Quoted 22 lines · Jiri Olsa

hi,
I was checking with SDM (September 2015) and I'd like if you guys could help me with understanding of following array elements

I'm reffering to Table 18-19. Data Source Encoding for Load Latency Record

- element 5
SDM says:

05H L3 HIT. Local or Remote home requests that hit the L3 cache and was serviced by another processor core with a cross core snoop where no modified copies were found. (clean).

and we have L3 SNOOP MISS:

     OP_LH | P(LVL, L3)  | P(SNOOP, MISS),   /* 0x05: L3 hit, snoop miss */

while the SDM indicates HIT

- element 6
SDM says:

Quoted 9 lines

L3 HIT. Local or Remote home requests that hit the L3 cache and was serviced by another processor core with a cross core snoop where modified copies were found. (HITM).

and we have L3 SNOOP HIT:

     OP_LH | P(LVL, L3)  | P(SNOOP, HIT),    /* 0x06: L3 hit, snoop hit */

while the SDM indicates HITM

I seem to recall there was something incorrect in the SDM and that's why I had it
this way. But it would be useful to double-check with Intel again. Andi?

Quoted 22 lines

I'm probably misunderstanding SDM (wouldn't be the first time) what do I miss?

thanks for comments,
jirka

---

arch/x86/kernel/cpu/perf_event_intel_ds.c +2 -2
index 5db1c7755548..000ab82d09e7 100644
@@ -57,8 +57,8 @@ static const u64 pebs_data_source[] = {
        OP_LH | P(LVL, LFB) | P(SNOOP, NONE),   /* 0x02: LFB hit */
        OP_LH | P(LVL, L2)  | P(SNOOP, NONE),   /* 0x03: L2 hit */
        OP_LH | P(LVL, L3)  | P(SNOOP, NONE),   /* 0x04: L3 hit */
-       OP_LH | P(LVL, L3)  | P(SNOOP, MISS),   /* 0x05: L3 hit, snoop miss */
-       OP_LH | P(LVL, L3)  | P(SNOOP, HIT),    /* 0x06: L3 hit, snoop hit */
+       OP_LH | P(LVL, L3)  | P(SNOOP, HIT),    /* 0x05: L3 hit, snoop hit */
+       OP_LH | P(LVL, L3)  | P(SNOOP, HITM),   /* 0x06: L3 hit, snoop hitm */
        OP_LH | P(LVL, L3)  | P(SNOOP, HITM),   /* 0x07: L3 hit, snoop hitm */
        OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HIT),  /* 0x08: L3 miss snoop hit */
        OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HITM), /* 0x09: L3 miss snoop hitm*/
#2 lore raw
In reply to Jiri Olsa
Quoted 1 line

I'm probably misunderstanding SDM (wouldn't be the first time) what do I miss?

Hi Jiri,

We checked the history, and it appears the SDM was not updated when the definition of the bits changed (around Sandy Bridge, possibly Westmere). So perf is correct for newer CPUs, but not for older, and we have to fork the table. I'll work on a patch and also see that the SDM gets fixed.

-Andi