ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
PATCH v2 1/1 ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and a lot of IO pins.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++ arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
V2: Sort the DT nodes alphabetically.
arch/arm/boot/dts/Makefile +1 -0
@@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ + socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \
arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi new file +33 -0
@@ -0,0 +1,33 @@ +/* + * Copyright (C) 2015 Marek Vasut <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "DENX MCV"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1 GiB */ + }; +}; + +&mmc0 { /* On-SoM eMMC */ + bus-width = <8>; +};
arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts new file +94 -0
94 lines not on this page · raw message
Signature · 1 line
2.1.4
Dinh Nguyen
AppliedPATCH v2 1/1 ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
Hi Marek,
Quoted 26 lines · Marek Vasut
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and a lot of IO pins.
Signed-off-by Marek Vasut <[email protected]>Cc Vince Bridgers <[email protected]>Cc Alan Tull <[email protected]>Cc Thor Thayer <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Olof Johansson <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++ arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dtsV2: Sort the DT nodes alphabetically.
arch/arm/boot/dts/Makefile +0
-0
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ · line 561
Quoted 7 lines
arch/arm/boot/dts/Makefile +1
-0@@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ + socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \
I've applied this to my tree.
Thanks,
Dinh
PATCH v2 1/1 ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
Quoted 1 line · Dinh Nguyen
Hi Marek,
Hi!
Quoted 34 lines · Marek Vasut
Quoted 33 lines
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and a lot of IO pins.
Signed-off-by Marek Vasut <[email protected]>Cc Vince Bridgers <[email protected]>Cc Alan Tull <[email protected]>Cc Thor Thayer <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Olof Johansson <[email protected]>---
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++ arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dtsV2: Sort the DT nodes alphabetically.
arch/arm/boot/dts/Makefile +0
-0@@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \
Quoted 7 lines
Quoted 5 lines
arch/arm/boot/dts/Makefile +1
-0+ socfpga_cyclone5_mcvevk.dtb \socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \I've applied this to my tree.
Cool, thanks!
Best regards,
Marek Vasut
PATCH v2 1/1 ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
In reply to Dinh NguyenQuoted 36 lines · Dinh Nguyen
Hi Marek,
Quoted 33 lines · Marek Vasut
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and a lot of IO pins.
Signed-off-by Marek Vasut <[email protected]>Cc Vince Bridgers <[email protected]>Cc Alan Tull <[email protected]>Cc Thor Thayer <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Olof Johansson <[email protected]>---
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++ arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dtsV2: Sort the DT nodes alphabetically.
arch/arm/boot/dts/Makefile +0
-0@@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \
Quoted 7 lines
Quoted 5 lines
arch/arm/boot/dts/Makefile +1
-0+ socfpga_cyclone5_mcvevk.dtb \socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \I've applied this to my tree.
Hi,
I just found this in linux-next, but all the tabs in the original patch submission are replaced with spaces in the DTS files. What happened ?
Thanks
Best regards,
Marek Vasut