configs/qemu: cleanup and capitalization
Subsystems (2)
PATCH 1/2 configs/qemu: cleanup and capitalization
Capitalize comments in a consistent way.
Cleanup redundant entries.
Drop global patch dir for sparc ss10 since it's not required any more.
--- configs/qemu_arm_nuri_defconfig | 2 -- configs/qemu_arm_versatile_defconfig | 5 ++--- configs/qemu_arm_vexpress_defconfig | 2 -- configs/qemu_mips_malta_defconfig | 2 +- configs/qemu_mipsel_malta_defconfig | 2 +- configs/qemu_ppc64_pseries_defconfig | 1 - configs/qemu_ppc_g3beige_defconfig | 2 +- configs/qemu_ppc_mpc8544ds_defconfig | 2 +- configs/qemu_sh4_r2d_defconfig | 5 ++--- configs/qemu_sh4eb_r2d_defconfig | 5 ++--- configs/qemu_sparc64_sun4u_defconfig | 2 +- configs/qemu_sparc_ss10_defconfig | 4 +--- configs/qemu_x86_64_defconfig | 5 ++--- configs/qemu_x86_defconfig | 5 ++--- configs/qemu_xtensa_lx60_defconfig | 1 + 15 files changed, 17 insertions(+), 28 deletions(-)
configs/qemu_arm_nuri_defconfig +0 -2
@@ -5,8 +5,6 @@ BR2_ARM_ENABLE_NEON=y BR2_ARM_FPU_VFPV3D16=y # System -BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y -BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttySAC1" # Filesystem
configs/qemu_arm_versatile_defconfig +2 -3
@@ -2,11 +2,10 @@ BR2_arm=y BR2_arm926t=y -# system -BR2_TARGET_GENERIC_GETTY=y +# System BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_arm_vexpress_defconfig +0 -2
@@ -5,8 +5,6 @@ BR2_ARM_ENABLE_NEON=y BR2_ARM_FPU_VFPV3D16=y # System -BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y -BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem
configs/qemu_mips_malta_defconfig +1 -1
@@ -2,7 +2,7 @@ BR2_mips=y BR2_mips_32r2=y -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_mipsel_malta_defconfig +1 -1
@@ -2,7 +2,7 @@ BR2_mipsel=y BR2_mips_32r2=y -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_ppc64_pseries_defconfig +0 -1
@@ -3,7 +3,6 @@ BR2_powerpc64=y BR2_powerpc_power7=y # System -BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="hvc0" # Filesystem
configs/qemu_ppc_g3beige_defconfig +1 -1
@@ -2,7 +2,7 @@ BR2_powerpc=y BR2_powerpc_750=y -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_ppc_mpc8544ds_defconfig +1 -1
@@ -2,7 +2,7 @@ BR2_powerpc=y BR2_powerpc_8548=y -# filesystem +# Filesystem # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y
configs/qemu_sh4_r2d_defconfig +2 -3
@@ -2,11 +2,10 @@ BR2_sh=y BR2_sh4=y -# system -BR2_TARGET_GENERIC_GETTY=y +# System BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_sh4eb_r2d_defconfig +2 -3
@@ -2,11 +2,10 @@ BR2_sh=y BR2_sh4eb=y -# system -BR2_TARGET_GENERIC_GETTY=y +# System BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_sparc64_sun4u_defconfig +1 -1
@@ -2,7 +2,7 @@ BR2_sparc64=y BR2_sparc_v9=y -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_sparc_ss10_defconfig +1 -3
@@ -2,9 +2,7 @@ BR2_sparc=y BR2_sparc_v8=y -BR2_GLOBAL_PATCH_DIR="board/qemu/sparc-ss10" - -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_x86_64_defconfig +2 -3
@@ -1,11 +1,10 @@ # Architecture BR2_x86_64=y -# system -BR2_TARGET_GENERIC_GETTY=y +# System BR2_TARGET_GENERIC_GETTY_PORT="tty1" -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_x86_defconfig +2 -3
@@ -2,11 +2,10 @@ BR2_i386=y BR2_x86_pentiumpro=y -# system -BR2_TARGET_GENERIC_GETTY=y +# System BR2_TARGET_GENERIC_GETTY_PORT="tty1" -# filesystem +# Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_xtensa_lx60_defconfig +1 -0
@@ -5,6 +5,7 @@ BR2_XTENSA_CUSTOM_NAME="dc232b" BR2_XTENSA_CORE_NAME="lx60" BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60" +# Patches BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60" # System
Signature · 1 line
2.4.10
PATCH 2/2 configs/qemu: enable dhcp on network interfaces
Enable dhcp networking for qemu configs considered good enough for testing purposes.
This excludes:arm_nuri - emulation doesn't seem 100% correct for networking. ppc_virtex_ml507 - doesn't emulate networking.
sh4eb - emulation doesn't seem 100% correct for the NIC.
--- configs/qemu_aarch64_virt_defconfig | 1 + configs/qemu_arm_versatile_defconfig | 1 + configs/qemu_arm_vexpress_defconfig | 1 + configs/qemu_microblazebe_mmu_defconfig | 1 + configs/qemu_microblazeel_mmu_defconfig | 1 + configs/qemu_mips64_malta_defconfig | 3 +++ configs/qemu_mips64el_malta_defconfig | 3 +++ configs/qemu_mips_malta_defconfig | 3 +++ configs/qemu_mipsel_malta_defconfig | 3 +++ configs/qemu_ppc64_pseries_defconfig | 1 + configs/qemu_ppc_g3beige_defconfig | 3 +++ configs/qemu_ppc_mpc8544ds_defconfig | 3 +++ configs/qemu_sh4_r2d_defconfig | 1 + configs/qemu_sparc64_sun4u_defconfig | 3 +++ configs/qemu_sparc_ss10_defconfig | 3 +++ configs/qemu_x86_64_defconfig | 1 + configs/qemu_x86_defconfig | 1 + configs/qemu_xtensa_lx60_defconfig | 1 + 18 files changed, 34 insertions(+)
configs/qemu_aarch64_virt_defconfig +1 -0
@@ -2,6 +2,7 @@ BR2_aarch64=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem
configs/qemu_arm_versatile_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_arm=y BR2_arm926t=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem
configs/qemu_arm_vexpress_defconfig +1 -0
@@ -5,6 +5,7 @@ BR2_ARM_ENABLE_NEON=y BR2_ARM_FPU_VFPV3D16=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem
configs/qemu_microblazebe_mmu_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_microblaze=y BR2_microblazebe=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # Filesystem
configs/qemu_microblazeel_mmu_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_microblaze=y BR2_microblazeel=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # Filesystem
configs/qemu_mips64_malta_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_mips64=y BR2_MIPS_NABI64=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_mips64el_malta_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_mips64el=y BR2_MIPS_NABI64=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_mips_malta_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_mips=y BR2_mips_32r2=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_mipsel_malta_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_mipsel=y BR2_mips_32r2=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_ppc64_pseries_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_powerpc64=y BR2_powerpc_power7=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="hvc0" # Filesystem
configs/qemu_ppc_g3beige_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_powerpc=y BR2_powerpc_750=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_ppc_mpc8544ds_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_powerpc=y BR2_powerpc_8548=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y
configs/qemu_sh4_r2d_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_sh=y BR2_sh4=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" # Filesystem
configs/qemu_sparc64_sun4u_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_sparc64=y BR2_sparc_v9=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_sparc_ss10_defconfig +3 -0
@@ -2,6 +2,9 @@ BR2_sparc=y BR2_sparc_v8=y +# System +BR2_SYSTEM_DHCP="eth0" + # Filesystem BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set
configs/qemu_x86_64_defconfig +1 -0
@@ -2,6 +2,7 @@ BR2_x86_64=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="tty1" # Filesystem
configs/qemu_x86_defconfig +1 -0
@@ -3,6 +3,7 @@ BR2_i386=y BR2_x86_pentiumpro=y # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="tty1" # Filesystem
configs/qemu_xtensa_lx60_defconfig +1 -0
@@ -9,6 +9,7 @@ BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60" BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60" # System +BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # Filesystem
Signature · 1 line
2.4.10
PATCH 2/2 configs/qemu: enable dhcp on network interfaces
Dear Gustavo Zacarias,
Quoted 21 lines · Gustavo Zacarias
Enable dhcp networking for qemu configs considered good enough for testing purposes.
This excludes:
arm_nuri- emulation doesn't seem 100% correct for networking.ppc_virtex_ml507- doesn't emulate networking.
sh4eb - emulation doesn't seem 100% correct for the NIC.Signed-off-by Gustavo Zacarias <[email protected]>--- configs/qemu_aarch64_virt_defconfig | 1 + configs/qemu_arm_versatile_defconfig | 1 + configs/qemu_arm_vexpress_defconfig | 1 + configs/qemu_microblazebe_mmu_defconfig | 1 + configs/qemu_microblazeel_mmu_defconfig | 1 + configs/qemu_mips64_malta_defconfig | 3 +++ configs/qemu_mips64el_malta_defconfig | 3 +++ configs/qemu_mips_malta_defconfig | 3 +++ configs/qemu_mipsel_malta_defconfig | 3 +++ configs/qemu_ppc64_pseries_defconfig | 1 + configs/qemu_ppc_g3beige_defconfig | 3 +++
Quoted 8 lines
configs/qemu_ppc_mpc8544ds_defconfig | 3 +++ configs/qemu_sh4_r2d_defconfig | 1 + configs/qemu_sparc64_sun4u_defconfig | 3 +++ configs/qemu_sparc_ss10_defconfig | 3 +++ configs/qemu_x86_64_defconfig | 1 + configs/qemu_x86_defconfig | 1 + configs/qemu_xtensa_lx60_defconfig | 1 + 18 files changed, 34 insertions(+)
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/2 configs/qemu: cleanup and capitalization
In reply to Gustavo ZacariasDear Gustavo Zacarias,
Quoted 14 lines · Gustavo Zacarias
Capitalize comments in a consistent way.
Cleanup redundant entries.
Drop global patch dir for sparc ss10 since it's not required any more.Signed-off-by Gustavo Zacarias <[email protected]>--- configs/qemu_arm_nuri_defconfig | 2 -- configs/qemu_arm_versatile_defconfig | 5 ++--- configs/qemu_arm_vexpress_defconfig | 2 -- configs/qemu_mips_malta_defconfig | 2 +- configs/qemu_mipsel_malta_defconfig | 2 +- configs/qemu_ppc64_pseries_defconfig | 1 - configs/qemu_ppc_g3beige_defconfig | 2 +- configs/qemu_ppc_mpc8544ds_defconfig | 2 +-
Quoted 8 lines
configs/qemu_sh4_r2d_defconfig | 5 ++--- configs/qemu_sh4eb_r2d_defconfig | 5 ++--- configs/qemu_sparc64_sun4u_defconfig | 2 +- configs/qemu_sparc_ss10_defconfig | 4 +--- configs/qemu_x86_64_defconfig | 5 ++--- configs/qemu_x86_defconfig | 5 ++--- configs/qemu_xtensa_lx60_defconfig | 1 + 15 files changed, 17 insertions(+), 28 deletions(-)
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/2 configs/qemu: cleanup and capitalization
In reply to Gustavo ZacariasQuoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Capitalize comments in a consistent way.
Cleanup redundant entries.
Drop global patch dir for sparc ss10 since it's not required any more.
These are not strictly bugfixes, but they seem quite safe and having them on master will make it easier to merge next - So committed both, thanks!
Signature · 1 line
Bye, Peter Korsgaard