Skip to contentSkip to conversation

Basic GPIO support for r8a7795

PATCH New Simon Horman 3 participants 5 messages Oct 28, 2015 – Nov 20, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v3 cover Basic GPIO support for r8a7795

Hi,

this is an update of work by Takeshi Kihara, posted by me, then Ulrich Hecht and now me again. Ulrich, I would be most grateful if you could look over this and repost if there are problems.

Changes:

* v3
- Correction to gpio-ranges as suggested by Geert Uytterhoeven
* v2
- Update to new CPG/MSSR bindings via Geert Uytterhoeven

Base:

* "[PATCH v12 0/7] arm64: renesas: Add Renesas R8A7795 SoC support". This can be found in the topic/arm64-rcar-gen3-v12 branch of my renesas tree on kernel.org.

Run-time dependencies:

* The base
* The new GPG driver
"[PATCH/RFC v4 0/5] clk: shmobile: Add new Renesas CPG/MSSR DT bindings" and its dependencies. This may be found in the topic/cpg-mssr-v4 branch of
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers
along with an earlier version of this patchset which updates applied.

Availability:
* This patchset is available in the topic/r8a7795-gpio-v3 branch of my renesas tree on kernel.org

Takeshi Kihara (2):
arm64: dts: r8a7795: add GPIO nodes
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC

 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 112 +++++++++++++++++++++++++++++++
 arch/arm64/configs/defconfig             |   1 +
 2 files changed, 113 insertions(+)
Signature · 1 line
2.1.4
#1 lore raw

PATCH v3 1/2 arm64: dts: r8a7795: add GPIO nodes

From: Takeshi Kihara <[email protected]>

---

v3 [Simon Horman]
* Corrected gpio-ranges as suggested by Geert Uytterhoeven

v2 [Simon Horman]
* Update for new CPG/MSSR bindings via Geert Uytterhoeven

v1 [Ulrich Hecht]
* Corrected gpio 6/7 clocks

v0 [Simon Horman]
* Broke out of lager patch
* Moved gpio nodes to soc node

---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 112 +++++++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +112 -0
index b94e5a9e2c3b..b5eee9ff7229 100644
@@ -59,6 +59,118 @@
 					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		gpio0: gpio at e6050000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&cpg>;
+		};
+
+		gpio1: gpio at e6051000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&cpg>;
+		};
+
+		gpio2: gpio at e6052000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&cpg>;
+		};
+
+		gpio3: gpio at e6053000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&cpg>;
+		};
+
+		gpio4: gpio at e6054000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&cpg>;
+		};
+
+		gpio5: gpio at e6055000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&cpg>;
+		};
+
+		gpio6: gpio at e6055400 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&cpg>;
+		};
+
+		gpio7: gpio at e6055800 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&cpg>;
+		};
+
 		timer {
 			compatible = "arm,armv8-timer";
 			interrupts = <GIC_PPI 13
Signature · 1 line
2.1.4
#2 lore raw

PATCH v3 1/2 arm64: dts: r8a7795: add GPIO nodes

Quoted 5 lines · Simon Horman

From: Takeshi Kihara <[email protected]>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#3 lore raw

PATCH v3 2/2 arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC

In reply to Simon Horman

From: Takeshi Kihara <[email protected]>

Enable GPIO for Renesas R-Car Gen3 SoC.

---

v3 [Simon Horman]
* Added Ack from Geert Uytterhoeven

v2
* No change

v0 [Simon Horman]
* Only enable GPIO_RCAR

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index dccc685b58ae..d9946384f102 100644
@@ -125,6 +125,7 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XGENE=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
Signature · 1 line
2.1.4
#4 lore raw

v3 cover Basic GPIO support for r8a7795

In reply to Simon Horman
Quoted 5 lines · Simon Horman

Hi,

this is an update of work by Takeshi Kihara, posted by me, then Ulrich Hecht and now me again. Ulrich, I would be most grateful if you could look over this and repost if there are problems.

I have queued this up for v4.5.