Denali NAND driver on SocKit
Hi!
I'm trying to get NAND to work on socdk board... but it looks like neccessary device tree bindings are not there. And when I do add them, they don't seem to work.
Does it work for you? Is there patch I should apply?
Thanks,
Pavel
arch/arm/boot/dts/socfpga.dtsi +40 -0
@@ -582,6 +582,46 @@ status = "disabled"; }; + nand: nand@ff900000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "denali,denali-nand-dt"; + reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 144 4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + have-hw-ecc-fixup; + status = "disabled"; + + partition@nand-boot { + /* 8MB for raw data. */ + label = "NAND Flash Boot Area 8MB"; + reg = <0x0 0x800000>; + }; + partition@nand-rootfs { + /* 128MB jffs2 root filesystem. */ + label = "NAND Flash jffs2 Root Filesystem 128MB"; + reg = <0x800000 0x8000000>; + }; + partition@nand-128 { + label = "NAND Flash 128 MB"; + reg = <0x8800000 0x8000000>; + }; + partition@nand-64 { + label = "NAND Flash 64 MB"; + reg = <0x10800000 0x4000000>; + }; + partition@nand-32 { + label = "NAND Flash 32 MB"; + reg = <0x14800000 0x2000000>; + }; + partition@nand-16 { + label = "NAND Flash 16 MB"; + reg = <0x16800000 0x1000000>; + }; + }; + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>;
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +4 -0
@@ -89,3 +89,7 @@ &usb1 { status = "okay"; }; + +&nand { + status = "okay"; +};
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
CC Graham Moore
Graham should know more about this.
Dinh
Quoted 76 lines · Pavel Machek
Hi!
I'm trying to get NAND to work on socdk board... but it looks like neccessary device tree bindings are not there. And when I do add them, they don't seem to work.
Does it work for you? Is there patch I should apply?
Thanks,
Pavelarch/arm/boot/dts/socfpga.dtsi +40
-0@@ -582,6 +582,46 @@ status = "disabled"; }; + nand: nand@ff900000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "denali,denali-nand-dt"; + reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 144 4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + have-hw-ecc-fixup; + status = "disabled"; + + partition@nand-boot { + /* 8MB for raw data. */ + label = "NAND Flash Boot Area 8MB"; + reg = <0x0 0x800000>; + }; + partition@nand-rootfs { + /* 128MB jffs2 root filesystem. */ + label = "NAND Flash jffs2 Root Filesystem 128MB"; + reg = <0x800000 0x8000000>; + }; + partition@nand-128 { + label = "NAND Flash 128 MB"; + reg = <0x8800000 0x8000000>; + }; + partition@nand-64 { + label = "NAND Flash 64 MB"; + reg = <0x10800000 0x4000000>; + }; + partition@nand-32 { + label = "NAND Flash 32 MB"; + reg = <0x14800000 0x2000000>; + }; + partition@nand-16 { + label = "NAND Flash 16 MB"; + reg = <0x16800000 0x1000000>; + }; + }; + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>;arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +4
-0@@ -89,3 +89,7 @@ &usb1 { status = "okay"; }; + +&nand { + status = "okay"; +};
Hi!
Quoted 3 lines
CC Graham MooreGraham should know more about this.
Ok, I know what went wrong. I got confused. It seems there is no nand connected to denali on sockit board.
Best regards,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html