Skip to contentSkip to conversation

arm64: renesas: r8a7795: add I2C support

PATCH Superseded Simon Horman 3 participants 8 messages Oct 27, 2015 – Dec 2, 2015

Subsystems (3)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover arm64: renesas: r8a7795: add I2C support

Hi,

these patches add i2c support to the r8a7795/Salvator-X.

These patches are an update of work by Kuninori Morimoto, broken out of a larger patchset posted by him.

The main change to the patches themselves since Morimoto-san's v3 posting is to update to new CPG/MSSR bindings via Geert Uytterhoeven.

Morimoto-san, I would be most grateful if you could look over this and repost if there are problems.

Base:

* "[PATCH v12 0/7] arm64: renesas: Add Renesas R8A7795 SoC support". This can be found in the topic/arm64-rcar-gen3-v12 branch of my renesas tree on kernel.org.

Availability:
* This patchset is available in the topic/r8a7795-i2c-v4 branch of my renesas tree on kernel.org

Kuninori Morimoto (3):
arm64: renesas: r8a7795: add I2C support
arm64: renesas: salvator-x: enable I2C
arm64: defconfig: Enable Renesas R-Car I2C Controller

 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 12 +++
 arch/arm64/boot/dts/renesas/r8a7795.dtsi           | 87 ++++++++++++++++++++++
 arch/arm64/configs/defconfig                       |  2 +
 3 files changed, 101 insertions(+)
Signature · 1 line
2.1.4
#1 lore raw

PATCH v4 1/3 arm64: renesas: r8a7795: add I2C support

From: Kuninori Morimoto <[email protected]>

[geert: aAdd clock-output-names properties]

---

v4 [Simon Horman]
* Update for new CPG/MSSR bindings via Geert Uytterhoeven

---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 87 ++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +87 -0
index b94e5a9e2c3b..bccb49d9fb02 100644
@@ -16,6 +16,16 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -168,5 +178,82 @@
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
+
+		i2c0: i2c at e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c4: i2c at e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c5: i2c at e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c6: i2c at e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 };
Signature · 1 line
2.1.4
#2 lore raw

PATCH v4 1/3 arm64: renesas: r8a7795: add I2C support

Quoted 5 lines · Simon Horman

From: Kuninori Morimoto <[email protected]>

[geert: aAdd clock-output-names properties]

As the clock-output-names are no longer valid, please replace the above two lines by

Quoted 1 line

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#3 lore raw

PATCH v4 2/3 arm64: renesas: salvator-x: enable I2C

In reply to Simon Horman

From: Kuninori Morimoto <[email protected]>

---
 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +12 -0
index f522fda7843a..0599b2be90ab 100644
@@ -45,6 +45,11 @@
 		renesas,groups = "scif2_data_a";
 		renesas,function = "scif2";
 	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2_a";
+		renesas,function = "i2c2";
+	};
 };
 
 &scif1 {
@@ -60,3 +65,10 @@
 
 	status = "okay";
 };
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
Signature · 1 line
2.1.4
#4 lore raw

PATCH v4 2/3 arm64: renesas: salvator-x: enable I2C

Quoted 4 lines · Simon Horman

From: Kuninori Morimoto <[email protected]>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#5 lore raw

PATCH v4 3/3 arm64: defconfig: Enable Renesas R-Car I2C Controller

In reply to Simon Horman

From: Kuninori Morimoto <[email protected]>

---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index dccc685b58ae..618f156fb90b 100644
@@ -121,6 +121,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_PINCTRL_MSM8916=y
Signature · 1 line
2.1.4
#6 lore raw

PATCH v4 3/3 arm64: defconfig: Enable Renesas R-Car I2C Controller

Quoted 4 lines · Simon Horman

From: Kuninori Morimoto <[email protected]>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#7 lore raw

v4 cover arm64: renesas: r8a7795: add I2C support

In reply to Simon Horman
Quoted 9 lines · Simon Horman

Hi,

these patches add i2c support to the r8a7795/Salvator-X.

These patches are an update of work by Kuninori Morimoto, broken out of a larger patchset posted by him.

The main change to the patches themselves since Morimoto-san's v3 posting is to update to new CPG/MSSR bindings via Geert Uytterhoeven.

I have queued up these patches for v4.5.