Clean up connman-conf

As reported in YP#8399[1] we currently hack the connman service to try and execute a script which is only installed on qemu targets. This pair of patches changes the connman-conf recipe to install a oneshot systemd unit that is called before ConnMan, removes the ExecStartPre and adds an override to the RRECOMMENDS so that the connman-conf is only installed by default for qemu machines and images for other machines are left with an error in the journal about failing to start a service.

Changes since v1:
* don't explicitly set INHIBIT_DEFAULT_DEPS, allarch.bbclass does that for us

Since the initial RFC submission I've:
* rebased on master
* changed connman-conf to be an allarch recipe
* updated to use the new systemd_system_unitdir variable

The following changes since commit 03f15e51998a3ef65a5b68cb7cbf724f4388c289:

sstate: Ensure siginfo and sig files are also touched (2015-11-25 08:09:00 +0000)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib joshuagl/connman
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=joshuagl/connman

Joshua Lock (3):
connman-conf: convert to systemd oneshot
connman-conf: mark as allarch
connman: tidy up connman-conf usage

 meta/recipes-connectivity/connman/connman-conf.bb              |  9 ++++++++-
 .../connman/connman-conf/qemuall/wired-connection.service      | 10 ++++++++++
 meta/recipes-connectivity/connman/connman.inc                  |  5 -----
 meta/recipes-connectivity/connman/connman_1.30.bb              |  3 +--
 4 files changed, 19 insertions(+), 8 deletions(-)
 create mode 100644 meta/recipes-connectivity/connman/connman-conf/qemuall/wired-connection.service

--
2.4.3

Install a oneshot unit file that is started before ConnMan to configure a wired network inteface with the wired-setup script rather than requiring this script to be manually run some how.

---
 meta/recipes-connectivity/connman/connman-conf.bb              |  9 ++++++++-
 .../connman/connman-conf/qemuall/wired-connection.service      | 10 ++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-connectivity/connman/connman-conf/qemuall/wired-connection.service

index 9254ed7..bef9237 100644
@@ -4,8 +4,11 @@ network interface for a qemu machine."
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
 
+inherit systemd
+
 SRC_URI_append_qemuall = " file://wired.config \
                            file://wired-setup \
+                           file://wired-connection.service \
 "
 PR = "r2"
 

@@ -17,10 +20,14 @@ FILES_${PN} = "${localstatedir}/* ${datadir}/*"
 
 do_install() {
     #Configure Wired network interface in case of qemu* machines
-    if test -e ${WORKDIR}/wired.config && test -e ${WORKDIR}/wired-setup; then
+    if test -e ${WORKDIR}/wired.config &&
+       test -e ${WORKDIR}/wired-setup &&
+       test -e ${WORKDIR}/wired-connection.service; then
         install -d ${D}${localstatedir}/lib/connman
         install -m 0644 ${WORKDIR}/wired.config ${D}${localstatedir}/lib/connman
         install -d ${D}${datadir}/connman
         install -m 0755 ${WORKDIR}/wired-setup ${D}${datadir}/connman
+        install -d ${D}${systemd_system_unitdir}
+        install -m 0644 ${WORKDIR}/wired-connection.service ${D}${systemd_system_unitdir}
     fi
 }

new file mode 100644
index 0000000..f66d158a
@@ -0,0 +1,10 @@
+[Unit]
+Description=Setup wired interface on qemu machines
+Before=connman.service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/lib/connman/wired-setup
+
+[Install]
+WantedBy=network.target

2.4.3

This recipe just installs some data files and thus is architecture independent and doesn't require a compiler and libc in its DEPENDS.

---
 meta/recipes-connectivity/connman/connman-conf.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bef9237..4c6a2d2 100644
@@ -4,7 +4,7 @@ network interface for a qemu machine."
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
 
-inherit systemd
+inherit systemd allarch
 
 SRC_URI_append_qemuall = " file://wired.config \
                            file://wired-setup \

2.4.3

Sorry I didn't notice it before, but this recipe is meant to provide MACHINE specific configuration, like the qemuall overrides does few lines below, so this cannot be allarch.

Martin 'JaMa' Jansa     jabber: [email protected]

connman-conf is now a systemd oneshot so need not be sed'ed in to the ConnMan service file.

Furthermore add connman-conf as RRECCOMENDS only for qemu machines.

This cleans up connman-conf so that it is not automatically installed and unconditionally calling a script that doesn't exist for most machines.

Note: this doesn't affect sysvinit where we provide the ConnMan init script which checks for the presence of the wired-networking script and if it exists executes it as part of the connman init.

[YOCTO #8399]

---
 meta/recipes-connectivity/connman/connman.inc     | 5 -----
 meta/recipes-connectivity/connman/connman_1.30.bb | 3 +--
 2 files changed, 1 insertion(+), 7 deletions(-)

index 6324d7a..40880ad 100644
@@ -68,11 +68,6 @@ python __anonymous () {
 
 SYSTEMD_SERVICE_${PN} = "connman.service"
 SYSTEMD_SERVICE_${PN}-vpn = "connman-vpn.service"
-SYSTEMD_WIRED_SETUP = "ExecStartPre=-${datadir}/connman/wired-setup"
-
-do_compile_append() {
-	sed -i "s#ExecStart=#${SYSTEMD_WIRED_SETUP}\nExecStart=#" ${B}/src/connman.service
-}
 
 do_install_append() {
 	if ${@bb.utils.contains('DISTRO_FEATURES','sysvinit','true','false',d)}; then

index 7d65ac9..7f7f5c3 100644
@@ -10,5 +10,4 @@ SRC_URI  = "${KERNELORG_MIRROR}/linux/network/${BPN}/${BP}.tar.xz \
 SRC_URI[md5sum] = "4a3efdbd6796922db9c6f66da57887fa"
 SRC_URI[sha256sum] = "5c5e464bacc9c27ed4e7269fb9b5059f07947f5be26433b59212133663ffa991"
 
-RRECOMMENDS_${PN} = "connman-conf"
-
+RRECOMMENDS_${PN}_qemuall = "connman-conf"

2.4.3