BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x900/0xe50

DISCUSSION Andrea Gelmini 4 participants 13 messages Dec 1, 2015 – Dec 4, 2015 SCSI

Share & tools

Andrea Gelmini

author

2015-12-01 20:20 UTC #0 lore raw

Hi everybody,
and thanks a lot for your work.

As soon as I plugged an external WD USB hard drive (details in the attached file) into USB3 port, I've got this (much more info in the attached files). Using commit 2255702db4014d1c69d6037ed7bdad2d2e271985

Thanks again,
Andrea

[  542.582204] ==================================================================
[  542.582220] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x900/0xe50 [ses] at addr ffff88038c421c12
[  542.582223] Read of size 1 by task systemd-udevd/4017
[  542.582225] =============================================================================
[  542.582227] BUG kmalloc-8 (Not tainted): kasan: bad access detected
[  542.582228] -----------------------------------------------------------------------------

[  542.582229] Disabling lock debugging due to kernel taint
[  542.582236] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.582243]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.582246]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.582249]  __kmalloc+0x19b/0x1e0
[  542.582253]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.582256]  ses_intf_add+0x9d6/0xe00 [ses]
[  542.582261]  class_interface_register+0x213/0x350
[  542.582264]  scsi_register_interface+0x33/0x40
[  542.582268]  ses_init+0x13/0x1000 [ses]
[  542.582272]  do_one_initcall+0x13c/0x2f0
[  542.582277]  do_init_module+0x1d9/0x5bc
[  542.582280]  load_module+0x6029/0x9230
[  542.582283]  SyS_finit_module+0x103/0x130
[  542.582288]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582293] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.582296]  __slab_free+0x292/0x3d0
[  542.582298]  kfree+0x108/0x120
[  542.582300]  sg_clean+0x12e/0x200
[  542.582302]  usb_sg_wait+0x2ad/0x3d0
[  542.582307]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.582311]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.582315]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.582319]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.582323]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.582327]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.582332]  kthread+0x1c0/0x260
[  542.582335]  ret_from_fork+0x3f/0x70
[  542.582339] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.582341] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.582345] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.582348] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.582354] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.582356] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.582361]  ffff88038c420000 ffff8800ac3ff6c0 ffffffff819c3387 ffff88038e404240
[  542.582365]  ffff8800ac3ff6f0 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.582368]  ffff88038c421c08 0000000000000000 ffff8800ac3ff718 ffffffff813e69bf
[  542.582369] Call Trace:
[  542.582375]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.582378]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.582382]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.582387]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.582392]  [<ffffffffc130842c>] ? ses_recv_diag+0xac/0xe0 [ses]
[  542.582397]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.582401]  [<ffffffffc1309490>] ? ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.582406]  [<ffffffffc1309490>] ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.582412]  [<ffffffff81d5d454>] ? pm_runtime_init+0x364/0x410
[  542.582417]  [<ffffffffc130a806>] ses_intf_add+0x9d6/0xe00 [ses]
[  542.582421]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.582425]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.582429]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.582432]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.582435]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.582439]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.582443]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.582446]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.582450]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582454]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582458]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.582463]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.582466]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.582469]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.582475]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.582479]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.582486]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.582489]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.582492]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.582497]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582498] Memory state around the buggy address:
[  542.582501]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582503]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582506] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582507]                          ^
[  542.582509]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582512]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.582513] ==================================================================
[  542.582514] ==================================================================
[  542.582519] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0xe3b/0xe50 [ses] at addr ffff88038c421c13
[  542.582521] Read of size 1 by task systemd-udevd/4017
[  542.582521] Read of size 1 by task systemd-udevd/4017
[  542.582522] =============================================================================
[  542.582524] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.582525] -----------------------------------------------------------------------------

[  542.582530] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.582533]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.582536]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.582539]  __kmalloc+0x19b/0x1e0
[  542.582542]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.582546]  ses_intf_add+0x9d6/0xe00 [ses]
[  542.582549]  class_interface_register+0x213/0x350
[  542.582551]  scsi_register_interface+0x33/0x40
[  542.582555]  ses_init+0x13/0x1000 [ses]
[  542.582557]  do_one_initcall+0x13c/0x2f0
[  542.582560]  do_init_module+0x1d9/0x5bc
[  542.582562]  load_module+0x6029/0x9230
[  542.582564]  SyS_finit_module+0x103/0x130
[  542.582568]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582571] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.582574]  __slab_free+0x292/0x3d0
[  542.582577]  kfree+0x108/0x120
[  542.582578]  sg_clean+0x12e/0x200
[  542.582580]  usb_sg_wait+0x2ad/0x3d0
[  542.582585]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.582588]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.582592]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.582596]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.582599]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.582603]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.582606]  kthread+0x1c0/0x260
[  542.582610]  ret_from_fork+0x3f/0x70
[  542.582612] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.582614] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.582617] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.582620] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.582623] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.582625] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.582628]  ffff88038c420000 ffff8800ac3ff6c0 ffffffff819c3387 ffff88038e404240
[  542.582632]  ffff8800ac3ff6f0 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.582635]  ffff88038c421c08 0000000000000000 ffff8800ac3ff718 ffffffff813e69bf
[  542.582636] Call Trace:
[  542.582639]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.582642]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.582645]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.582649]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.582654]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.582659]  [<ffffffffc13099cb>] ? ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.582663]  [<ffffffffc13099cb>] ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.582667]  [<ffffffff81d5d454>] ? pm_runtime_init+0x364/0x410
[  542.582672]  [<ffffffffc130a806>] ses_intf_add+0x9d6/0xe00 [ses]
[  542.582676]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.582680]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.582683]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.582686]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.582689]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.582693]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.582696]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.582699]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.582703]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582707]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582711]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.582715]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.582718]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.582721]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.582727]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.582730]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.582735]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.582738]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.582741]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.582746]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582747] Memory state around the buggy address:
[  542.582750]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582752]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582754] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582755]                          ^
[  542.582757]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582759]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.582760] ==================================================================
[  542.584193] ==================================================================
[  542.584206] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x900/0xe50 [ses] at addr ffff88038c421c12
[  542.584209] Read of size 1 by task systemd-udevd/4017
[  542.584210] =============================================================================
[  542.584212] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.584213] -----------------------------------------------------------------------------

[  542.584219] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.584223]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.584226]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.584229]  __kmalloc+0x19b/0x1e0
[  542.584232]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.584236]  ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584239]  ses_intf_add+0xaa0/0xe00 [ses]
[  542.584243]  class_interface_register+0x213/0x350
[  542.584245]  scsi_register_interface+0x33/0x40
[  542.584249]  ses_init+0x13/0x1000 [ses]
[  542.584252]  do_one_initcall+0x13c/0x2f0
[  542.584255]  do_init_module+0x1d9/0x5bc
[  542.584258]  load_module+0x6029/0x9230
[  542.584260]  SyS_finit_module+0x103/0x130
[  542.584264]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584267] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.584270]  __slab_free+0x292/0x3d0
[  542.584273]  kfree+0x108/0x120
[  542.584275]  sg_clean+0x12e/0x200
[  542.584277]  usb_sg_wait+0x2ad/0x3d0
[  542.584281]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.584285]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.584288]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.584292]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.584296]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.584300]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.584303]  kthread+0x1c0/0x260
[  542.584307]  ret_from_fork+0x3f/0x70
[  542.584310] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.584311] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.584315] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.584317] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.584321] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.584323] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.584327]  ffff88038c420000 ffff8800ac3ff5f8 ffffffff819c3387 ffff88038e404240
[  542.584331]  ffff8800ac3ff628 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.584334]  ffff88038c421c08 0000000000000000 ffff8800ac3ff650 ffffffff813e69bf
[  542.584335] Call Trace:
[  542.584338]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.584342]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.584345]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.584349]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.584354]  [<ffffffffc130842c>] ? ses_recv_diag+0xac/0xe0 [ses]
[  542.584358]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.584363]  [<ffffffffc1309490>] ? ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.584367]  [<ffffffffc1309490>] ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.584371]  [<ffffffff813e884a>] ? kasan_report_error+0x46a/0x540
[  542.584376]  [<ffffffffc1309a95>] ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584380]  [<ffffffffc13093b0>] ? ses_enclosure_data_process+0x820/0xe50 [ses]
[  542.584385]  [<ffffffffc13099e0>] ? ses_enclosure_data_process+0xe50/0xe50 [ses]
[  542.584389]  [<ffffffff81dd1a13>] ? __scsi_iterate_devices+0xf3/0x240
[  542.584394]  [<ffffffffc130a8d0>] ses_intf_add+0xaa0/0xe00 [ses]
[  542.584398]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.584402]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.584405]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.584408]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.584411]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.584415]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.584418]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.584421]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.584425]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584429]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584433]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.584438]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.584441]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.584444]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.584450]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.584453]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.584458]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.584461]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.584464]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.584469]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584470] Memory state around the buggy address:
[  542.584473]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584475]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584478] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584479]                          ^
[  542.584481]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584483]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.584484] ==================================================================
[  542.584485] ==================================================================
[  542.584490] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0xe3b/0xe50 [ses] at addr ffff88038c421c13
[  542.584492] Read of size 1 by task systemd-udevd/4017
[  542.584493] =============================================================================
[  542.584495] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.584496] -----------------------------------------------------------------------------

[  542.584501] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.584504]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.584507]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.584510]  __kmalloc+0x19b/0x1e0
[  542.584513]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.584517]  ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584520]  ses_intf_add+0xaa0/0xe00 [ses]
[  542.584523]  class_interface_register+0x213/0x350
[  542.584525]  scsi_register_interface+0x33/0x40
[  542.584529]  ses_init+0x13/0x1000 [ses]
[  542.584531]  do_one_initcall+0x13c/0x2f0
[  542.584534]  do_init_module+0x1d9/0x5bc
[  542.584536]  load_module+0x6029/0x9230
[  542.584538]  SyS_finit_module+0x103/0x130
[  542.584542]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584545] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.584548]  __slab_free+0x292/0x3d0
[  542.584550]  kfree+0x108/0x120
[  542.584552]  sg_clean+0x12e/0x200
[  542.584554]  usb_sg_wait+0x2ad/0x3d0
[  542.584558]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.584562]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.584565]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.584569]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.584573]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.584577]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.584580]  kthread+0x1c0/0x260
[  542.584583]  ret_from_fork+0x3f/0x70
[  542.584585] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.584587] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.584590] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.584592] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.584596] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.584597] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.584601]  ffff88038c420000 ffff8800ac3ff5f8 ffffffff819c3387 ffff88038e404240
[  542.584604]  ffff8800ac3ff628 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.584607]  ffff88038c421c08 0000000000000000 ffff8800ac3ff650 ffffffff813e69bf
[  542.584608] Call Trace:
[  542.584611]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.584614]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.584617]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.584621]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.584626]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.584630]  [<ffffffffc13099cb>] ? ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.584635]  [<ffffffffc13099cb>] ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.584638]  [<ffffffff813e884a>] ? kasan_report_error+0x46a/0x540
[  542.584643]  [<ffffffffc1309a95>] ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584647]  [<ffffffffc13093b0>] ? ses_enclosure_data_process+0x820/0xe50 [ses]
[  542.584652]  [<ffffffffc13099e0>] ? ses_enclosure_data_process+0xe50/0xe50 [ses]
[  542.584655]  [<ffffffff81dd1a13>] ? __scsi_iterate_devices+0xf3/0x240
[  542.584660]  [<ffffffffc130a8d0>] ses_intf_add+0xaa0/0xe00 [ses]
[  542.584664]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.584668]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.584671]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.584674]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.584677]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.584681]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.584684]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.584687]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.584691]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584694]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584698]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.584703]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.584706]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.584709]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.584715]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.584718]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.584723]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.584726]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.584728]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.584733]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584735] Memory state around the buggy address:
[  542.584737]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584739]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584741] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584742]                          ^
[  542.584744]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584747]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.584748] ==================================================================
[  542.585112] ses 6:0:0:1: Attached Enclosure device
[  542.897281] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  542.975864] sd 6:0:0:0: [sdb] Attached SCSI disk

James Bottomley

maintainer

2015-12-02 22:58 UTC #1 lore raw

Quoted 347 lines · Andrea Gelmini

Hi everybody,
and thanks a lot for your work.

Thanks again,
Andrea

[  542.582204] ==================================================================
[  542.582220] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x900/0xe50 [ses] at addr ffff88038c421c12
[  542.582223] Read of size 1 by task systemd-udevd/4017
[  542.582225] =============================================================================
[  542.582227] BUG kmalloc-8 (Not tainted): kasan: bad access detected
[  542.582228] -----------------------------------------------------------------------------

[  542.582229] Disabling lock debugging due to kernel taint
[  542.582236] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.582243]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.582246]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.582249]  __kmalloc+0x19b/0x1e0
[  542.582253]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.582256]  ses_intf_add+0x9d6/0xe00 [ses]
[  542.582261]  class_interface_register+0x213/0x350
[  542.582264]  scsi_register_interface+0x33/0x40
[  542.582268]  ses_init+0x13/0x1000 [ses]
[  542.582272]  do_one_initcall+0x13c/0x2f0
[  542.582277]  do_init_module+0x1d9/0x5bc
[  542.582280]  load_module+0x6029/0x9230
[  542.582283]  SyS_finit_module+0x103/0x130
[  542.582288]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582293] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.582296]  __slab_free+0x292/0x3d0
[  542.582298]  kfree+0x108/0x120
[  542.582300]  sg_clean+0x12e/0x200
[  542.582302]  usb_sg_wait+0x2ad/0x3d0
[  542.582307]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.582311]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.582315]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.582319]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.582323]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.582327]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.582332]  kthread+0x1c0/0x260
[  542.582335]  ret_from_fork+0x3f/0x70
[  542.582339] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.582341] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.582345] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.582348] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.582354] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.582356] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.582361]  ffff88038c420000 ffff8800ac3ff6c0 ffffffff819c3387 ffff88038e404240
[  542.582365]  ffff8800ac3ff6f0 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.582368]  ffff88038c421c08 0000000000000000 ffff8800ac3ff718 ffffffff813e69bf
[  542.582369] Call Trace:
[  542.582375]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.582378]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.582382]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.582387]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.582392]  [<ffffffffc130842c>] ? ses_recv_diag+0xac/0xe0 [ses]
[  542.582397]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.582401]  [<ffffffffc1309490>] ? ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.582406]  [<ffffffffc1309490>] ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.582412]  [<ffffffff81d5d454>] ? pm_runtime_init+0x364/0x410
[  542.582417]  [<ffffffffc130a806>] ses_intf_add+0x9d6/0xe00 [ses]
[  542.582421]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.582425]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.582429]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.582432]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.582435]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.582439]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.582443]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.582446]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.582450]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582454]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582458]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.582463]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.582466]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.582469]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.582475]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.582479]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.582486]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.582489]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.582492]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.582497]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582498] Memory state around the buggy address:
[  542.582501]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582503]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582506] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582507]                          ^
[  542.582509]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582512]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.582513] ==================================================================
[  542.582514] ==================================================================
[  542.582519] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0xe3b/0xe50 [ses] at addr ffff88038c421c13
[  542.582521] Read of size 1 by task systemd-udevd/4017
[  542.582521] Read of size 1 by task systemd-udevd/4017
[  542.582522] =============================================================================
[  542.582524] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.582525] -----------------------------------------------------------------------------

[  542.582530] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.582533]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.582536]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.582539]  __kmalloc+0x19b/0x1e0
[  542.582542]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.582546]  ses_intf_add+0x9d6/0xe00 [ses]
[  542.582549]  class_interface_register+0x213/0x350
[  542.582551]  scsi_register_interface+0x33/0x40
[  542.582555]  ses_init+0x13/0x1000 [ses]
[  542.582557]  do_one_initcall+0x13c/0x2f0
[  542.582560]  do_init_module+0x1d9/0x5bc
[  542.582562]  load_module+0x6029/0x9230
[  542.582564]  SyS_finit_module+0x103/0x130
[  542.582568]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582571] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.582574]  __slab_free+0x292/0x3d0
[  542.582577]  kfree+0x108/0x120
[  542.582578]  sg_clean+0x12e/0x200
[  542.582580]  usb_sg_wait+0x2ad/0x3d0
[  542.582585]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.582588]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.582592]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.582596]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.582599]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.582603]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.582606]  kthread+0x1c0/0x260
[  542.582610]  ret_from_fork+0x3f/0x70
[  542.582612] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.582614] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.582617] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.582620] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.582623] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.582625] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.582628]  ffff88038c420000 ffff8800ac3ff6c0 ffffffff819c3387 ffff88038e404240
[  542.582632]  ffff8800ac3ff6f0 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.582635]  ffff88038c421c08 0000000000000000 ffff8800ac3ff718 ffffffff813e69bf
[  542.582636] Call Trace:
[  542.582639]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.582642]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.582645]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.582649]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.582654]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.582659]  [<ffffffffc13099cb>] ? ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.582663]  [<ffffffffc13099cb>] ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.582667]  [<ffffffff81d5d454>] ? pm_runtime_init+0x364/0x410
[  542.582672]  [<ffffffffc130a806>] ses_intf_add+0x9d6/0xe00 [ses]
[  542.582676]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.582680]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.582683]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.582686]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.582689]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.582693]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.582696]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.582699]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.582703]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582707]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.582711]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.582715]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.582718]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.582721]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.582727]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.582730]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.582735]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.582738]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.582741]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.582746]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.582747] Memory state around the buggy address:
[  542.582750]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582752]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582754] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582755]                          ^
[  542.582757]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.582759]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.582760] ==================================================================
[  542.584193] ==================================================================
[  542.584206] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x900/0xe50 [ses] at addr ffff88038c421c12
[  542.584209] Read of size 1 by task systemd-udevd/4017
[  542.584210] =============================================================================
[  542.584212] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.584213] -----------------------------------------------------------------------------

[  542.584219] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.584223]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.584226]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.584229]  __kmalloc+0x19b/0x1e0
[  542.584232]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.584236]  ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584239]  ses_intf_add+0xaa0/0xe00 [ses]
[  542.584243]  class_interface_register+0x213/0x350
[  542.584245]  scsi_register_interface+0x33/0x40
[  542.584249]  ses_init+0x13/0x1000 [ses]
[  542.584252]  do_one_initcall+0x13c/0x2f0
[  542.584255]  do_init_module+0x1d9/0x5bc
[  542.584258]  load_module+0x6029/0x9230
[  542.584260]  SyS_finit_module+0x103/0x130
[  542.584264]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584267] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.584270]  __slab_free+0x292/0x3d0
[  542.584273]  kfree+0x108/0x120
[  542.584275]  sg_clean+0x12e/0x200
[  542.584277]  usb_sg_wait+0x2ad/0x3d0
[  542.584281]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.584285]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.584288]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.584292]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.584296]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.584300]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.584303]  kthread+0x1c0/0x260
[  542.584307]  ret_from_fork+0x3f/0x70
[  542.584310] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.584311] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.584315] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.584317] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.584321] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.584323] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.584327]  ffff88038c420000 ffff8800ac3ff5f8 ffffffff819c3387 ffff88038e404240
[  542.584331]  ffff8800ac3ff628 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.584334]  ffff88038c421c08 0000000000000000 ffff8800ac3ff650 ffffffff813e69bf
[  542.584335] Call Trace:
[  542.584338]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.584342]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.584345]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.584349]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.584354]  [<ffffffffc130842c>] ? ses_recv_diag+0xac/0xe0 [ses]
[  542.584358]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.584363]  [<ffffffffc1309490>] ? ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.584367]  [<ffffffffc1309490>] ses_enclosure_data_process+0x900/0xe50 [ses]
[  542.584371]  [<ffffffff813e884a>] ? kasan_report_error+0x46a/0x540
[  542.584376]  [<ffffffffc1309a95>] ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584380]  [<ffffffffc13093b0>] ? ses_enclosure_data_process+0x820/0xe50 [ses]
[  542.584385]  [<ffffffffc13099e0>] ? ses_enclosure_data_process+0xe50/0xe50 [ses]
[  542.584389]  [<ffffffff81dd1a13>] ? __scsi_iterate_devices+0xf3/0x240
[  542.584394]  [<ffffffffc130a8d0>] ses_intf_add+0xaa0/0xe00 [ses]
[  542.584398]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.584402]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.584405]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.584408]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.584411]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.584415]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.584418]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.584421]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.584425]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584429]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584433]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.584438]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.584441]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.584444]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.584450]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.584453]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.584458]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.584461]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.584464]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.584469]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584470] Memory state around the buggy address:
[  542.584473]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584475]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584478] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584479]                          ^
[  542.584481]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584483]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.584484] ==================================================================
[  542.584485] ==================================================================
[  542.584490] BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0xe3b/0xe50 [ses] at addr ffff88038c421c13
[  542.584492] Read of size 1 by task systemd-udevd/4017
[  542.584493] =============================================================================
[  542.584495] BUG kmalloc-8 (Tainted: G    B          ): kasan: bad access detected
[  542.584496] -----------------------------------------------------------------------------

[  542.584501] INFO: Allocated in ses_enclosure_data_process+0x1e6/0xe50 [ses] age=1 cpu=2 pid=4017
[  542.584504]  ___slab_alloc.constprop.27+0x379/0x3a0
[  542.584507]  __slab_alloc.isra.24.constprop.26+0x26/0x40
[  542.584510]  __kmalloc+0x19b/0x1e0
[  542.584513]  ses_enclosure_data_process+0x1e6/0xe50 [ses]
[  542.584517]  ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584520]  ses_intf_add+0xaa0/0xe00 [ses]
[  542.584523]  class_interface_register+0x213/0x350
[  542.584525]  scsi_register_interface+0x33/0x40
[  542.584529]  ses_init+0x13/0x1000 [ses]
[  542.584531]  do_one_initcall+0x13c/0x2f0
[  542.584534]  do_init_module+0x1d9/0x5bc
[  542.584536]  load_module+0x6029/0x9230
[  542.584538]  SyS_finit_module+0x103/0x130
[  542.584542]  entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584545] INFO: Freed in sg_clean+0x12e/0x200 age=1 cpu=3 pid=4009
[  542.584548]  __slab_free+0x292/0x3d0
[  542.584550]  kfree+0x108/0x120
[  542.584552]  sg_clean+0x12e/0x200
[  542.584554]  usb_sg_wait+0x2ad/0x3d0
[  542.584558]  usb_stor_bulk_transfer_sglist.part.3+0xc4/0x200 [usb_storage]
[  542.584562]  usb_stor_bulk_srb+0x184/0x280 [usb_storage]
[  542.584565]  usb_stor_Bulk_transport+0x53e/0xf80 [usb_storage]
[  542.584569]  usb_stor_invoke_transport+0xf2/0x1430 [usb_storage]
[  542.584573]  usb_stor_transparent_scsi_command+0x9/0x10 [usb_storage]
[  542.584577]  usb_stor_control_thread+0x530/0xac0 [usb_storage]
[  542.584580]  kthread+0x1c0/0x260
[  542.584583]  ret_from_fork+0x3f/0x70
[  542.584585] INFO: Slab 0xffffea000e310800 objects=26 used=25 fp=0xffff88038c421e78 flags=0x8000000000004080
[  542.584587] INFO: Object 0xffff88038c421c08 @offset=7176 fp=0x0000000000000008

[  542.584590] Bytes b4 ffff88038c421bf8: 01 00 00 00 01 00 00 00 74 97 fd ff 00 00 00 00  ........t.......
[  542.584592] Object ffff88038c421c08: 08 00 00 00 00 00 00 00                          ........
[  542.584596] CPU: 2 PID: 4017 Comm: systemd-udevd Tainted: G    B           4.4.0-rc3KASan-00005-g2255702 #5
[  542.584597] Hardware name: LENOVO 2356LRG/2356LRG, BIOS G7ETA3WW (2.63 ) 04/16/2015
[  542.584601]  ffff88038c420000 ffff8800ac3ff5f8 ffffffff819c3387 ffff88038e404240
[  542.584604]  ffff8800ac3ff628 ffffffff813e22f4 ffff88038e404240 ffffea000e310800
[  542.584607]  ffff88038c421c08 0000000000000000 ffff8800ac3ff650 ffffffff813e69bf
[  542.584608] Call Trace:
[  542.584611]  [<ffffffff819c3387>] dump_stack+0x4b/0x74
[  542.584614]  [<ffffffff813e22f4>] print_trailer+0xf4/0x150
[  542.584617]  [<ffffffff813e69bf>] object_err+0x2f/0x40
[  542.584621]  [<ffffffff813e85fc>] kasan_report_error+0x21c/0x540
[  542.584626]  [<ffffffff813e895e>] __asan_report_load1_noabort+0x3e/0x40
[  542.584630]  [<ffffffffc13099cb>] ? ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.584635]  [<ffffffffc13099cb>] ses_enclosure_data_process+0xe3b/0xe50 [ses]
[  542.584638]  [<ffffffff813e884a>] ? kasan_report_error+0x46a/0x540
[  542.584643]  [<ffffffffc1309a95>] ses_match_to_enclosure+0xb5/0x450 [ses]
[  542.584647]  [<ffffffffc13093b0>] ? ses_enclosure_data_process+0x820/0xe50 [ses]
[  542.584652]  [<ffffffffc13099e0>] ? ses_enclosure_data_process+0xe50/0xe50 [ses]
[  542.584655]  [<ffffffff81dd1a13>] ? __scsi_iterate_devices+0xf3/0x240
[  542.584660]  [<ffffffffc130a8d0>] ses_intf_add+0xaa0/0xe00 [ses]
[  542.584664]  [<ffffffff81d45183>] class_interface_register+0x213/0x350
[  542.584668]  [<ffffffff81d44f70>] ? class_dev_iter_exit+0x10/0x10
[  542.584671]  [<ffffffff819f44a0>] ? kvasprintf+0xf0/0xf0
[  542.584674]  [<ffffffffc1130000>] ? 0xffffffffc1130000
[  542.584677]  [<ffffffff81dff163>] scsi_register_interface+0x33/0x40
[  542.584681]  [<ffffffffc1130013>] ses_init+0x13/0x1000 [ses]
[  542.584684]  [<ffffffff810021ac>] do_one_initcall+0x13c/0x2f0
[  542.584687]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[  542.584691]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584694]  [<ffffffff813e7d06>] ? kasan_unpoison_shadow+0x36/0x50
[  542.584698]  [<ffffffff813e7e17>] ? __asan_register_globals+0x87/0xa0
[  542.584703]  [<ffffffff813199fd>] do_init_module+0x1d9/0x5bc
[  542.584706]  [<ffffffff8124d669>] load_module+0x6029/0x9230
[  542.584709]  [<ffffffff81245430>] ? symbol_put_addr+0x50/0x50
[  542.584715]  [<ffffffff81247640>] ? module_frob_arch_sections+0x20/0x20
[  542.584718]  [<ffffffff8142de90>] ? open_exec+0x50/0x50
[  542.584723]  [<ffffffff8111b9ff>] ? ns_capable+0x4f/0xd0
[  542.584726]  [<ffffffff81250b43>] SyS_finit_module+0x103/0x130
[  542.584728]  [<ffffffff81250a40>] ? SyS_init_module+0x1d0/0x1d0
[  542.584733]  [<ffffffff824c6df6>] entry_SYSCALL_64_fastpath+0x16/0x75
[  542.584735] Memory state around the buggy address:
[  542.584737]  ffff88038c421b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584739]  ffff88038c421b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Quoted 8 lines

[  542.584741] >ffff88038c421c00: fc 05 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584742]                          ^
[  542.584744]  ffff88038c421c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  542.584747]  ffff88038c421d00: fc fc fc fc fc fc fc fc 00 fc fc fc fc fc fc fc
[  542.584748] ==================================================================
[  542.585112] ses 6:0:0:1: Attached Enclosure device
[  542.897281] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  542.975864] sd 6:0:0:0: [sdb] Attached SCSI disk

OK, this looks like some type of problem with a USB enclosure. It's probably misreporting something in the mode pages. can you run sg_ses on whatever /dev/sg<n> the enclosure turns up as?

Thanks,

James

Andrea Gelmini

author

2015-12-03 20:37 UTC #2 lore raw

Quoted 4 lines · James Bottomley

On Tue, 2015-12-01 at 21:20 +0100, Andrea Gelmini wrote:
OK, this looks like some type of problem with a USB enclosure. It's probably misreporting something in the mode pages. can you run sg_ses on whatever /dev/sg<n> the enclosure turns up as?

root@glen:/tmp/report# cat sg_ses_usb_hd.txt 
  WD        My Passport 0820  1007
    disk device (not an enclosure)
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

By the way, same issue with kernel 4.3 (6a13feb9c82803e2b815eca72fa7a9f5561d7861). Attached the dmesg output.

Thanks a lot,
Andrea

James Bottomley

maintainer

2015-12-03 20:59 UTC #3 lore raw

Quoted 7 lines · Andrea Gelmini

Quoted 4 lines · James Bottomley
On Tue, 2015-12-01 at 21:20 +0100, Andrea Gelmini wrote:
OK, this looks like some type of problem with a USB enclosure. It's probably misreporting something in the mode pages. can you run sg_ses on whatever /dev/sg<n> the enclosure turns up as?

Quoted 10 lines

root@glen:/tmp/report# cat sg_ses_usb_hd.txt 
  WD        My Passport 0820  1007
    disk device (not an enclosure)
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Actually, I'm afraid that's the wrong device; it's the disk not the enclosure (that's why sg_ses says not an enclosure)

If you do

sg_map -i

in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

Thanks,

James

Douglas Gilbert

2015-12-03 21:11 UTC #4 lore raw

Quoted 22 lines · James Bottomley

Quoted 7 lines · Andrea Gelmini
Quoted 4 lines · James Bottomley
On Tue, 2015-12-01 at 21:20 +0100, Andrea Gelmini wrote:
OK, this looks like some type of problem with a USB enclosure. It's probably misreporting something in the mode pages. can you run sg_ses on whatever /dev/sg<n> the enclosure turns up as?
Quoted 10 lines
root@glen:/tmp/report# cat sg_ses_usb_hd.txt
   WD        My Passport 0820  1007
     disk device (not an enclosure)
Supported diagnostic pages:
   Supported Diagnostic Pages [sdp] [0x0]
   Short Enclosure Status (SES) [ses] [0x8]
   <unknown> [0x80]
   <unknown> [0x83]
   <unknown> [0x84]
   <unknown> [0x85]
Actually, I'm afraid that's the wrong device; it's the disk not the enclosure (that's why sg_ses says not an enclosure)

Quoted 6 lines

If you do
sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

Or use lsscsi like this and look for lines with 'enclosu' in its output:

  # lsscsi -gs
[3:0:0:0]  disk    ATA     ST3160812AS      D     /dev/sda  /dev/sg0  160GB
[6:0:0:0]  disk    SEAGATE ST200FM0073      0007  /dev/sdb  /dev/sg1  200GB
[6:0:1:0]  enclosu Areca   ARC-802801.13.1D 0113  -         /dev/sg2      -

Then:

  # sg_ses /dev/sg2
  Areca     ARC-802801.13.1D  0113
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Configuration (SES) [cf] [0x1]
  Enclosure Status/Control (SES) [ec,es] [0x2]
  String In/Out (SES) [str] [0x4]
  Threshold In/Out (SES) [th] [0x5]
  Element Descriptor (SES) [ed] [0x7]
  Additional Element Status (SES-2) [aes] [0xa]
  Supported SES Diagnostic Pages (SES-2) [ssp] [0xd]
  Download Microcode (SES-2) [dm] [0xe]
  Subenclosure Nickname (SES-2) [snic] [0xf]
  Protocol Specific (SAS transport) [] [0x3f]

Doug Gilbert

James Bottomley

maintainer

2015-12-03 21:20 UTC #5 lore raw

Quoted 38 lines · Douglas Gilbert

Quoted 22 lines · James Bottomley
Quoted 7 lines · Andrea Gelmini
Quoted 4 lines · James Bottomley
On Tue, 2015-12-01 at 21:20 +0100, Andrea Gelmini wrote:
OK, this looks like some type of problem with a USB enclosure. It's probably misreporting something in the mode pages. can you run sg_ses on whatever /dev/sg<n> the enclosure turns up as?
Quoted 10 lines
root@glen:/tmp/report# cat sg_ses_usb_hd.txt
   WD        My Passport 0820  1007
     disk device (not an enclosure)
Supported diagnostic pages:
   Supported Diagnostic Pages [sdp] [0x0]
   Short Enclosure Status (SES) [ses] [0x8]
   <unknown> [0x80]
   <unknown> [0x83]
   <unknown> [0x84]
   <unknown> [0x85]
Actually, I'm afraid that's the wrong device; it's the disk not the enclosure (that's why sg_ses says not an enclosure)
Quoted 6 lines
If you do
sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.
Or use lsscsi like this and look for lines with 'enclosu' in its output:
   # lsscsi -gs
[3:0:0:0]  disk    ATA     ST3160812AS      D     /dev/sda  /dev/sg0  160GB
[6:0:0:0]  disk    SEAGATE ST200FM0073      0007  /dev/sdb  /dev/sg1  200GB
[6:0:1:0]  enclosu Areca   ARC-802801.13.1D 0113  -         /dev/sg2      -
Then:

Quoted 14 lines

   # sg_ses /dev/sg2
   Areca     ARC-802801.13.1D  0113
Supported diagnostic pages:
   Supported Diagnostic Pages [sdp] [0x0]
   Configuration (SES) [cf] [0x1]
   Enclosure Status/Control (SES) [ec,es] [0x2]
   String In/Out (SES) [str] [0x4]
   Threshold In/Out (SES) [th] [0x5]
   Element Descriptor (SES) [ed] [0x7]
   Additional Element Status (SES-2) [aes] [0xa]
   Supported SES Diagnostic Pages (SES-2) [ssp] [0xd]
   Download Microcode (SES-2) [dm] [0xe]
   Subenclosure Nickname (SES-2) [snic] [0xf]
   Protocol Specific (SAS transport) [] [0x3f]

Actually I need a hex dump of pages 1 7 and 0xa ... how do you get that?

Thanks,

James

Andrea Gelmini

author

2015-12-03 22:20 UTC #6 lore raw

In reply to James Bottomley

Quoted 4 lines · James Bottomley

sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

root@glen:/home/gelma# sg_map -i
/dev/sg0  /dev/sda  ATA       Samsung SSD 850   1B6Q
/dev/sg1  /dev/sr0  HL-DT-ST  DVDRAM GU40N      QX23
/dev/sg2  /dev/sdb  WD        My Passport 0820  1007
/dev/sg3  WD        SES Device        1007

And following Douglas' instructions:

root@glen:/home/gelma# lsscsi -gs
[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda   /dev/sg0   1.02TB
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GU40N     QX23  /dev/sr0   /dev/sg1        -
[8:0:0:0]    disk    WD       My Passport 0820 1007  /dev/sdb   /dev/sg2   2.00TB
[8:0:0:1]    enclosu WD       SES Device       1007  -          /dev/sg3

root@glen:/home/gelma# sg_ses /dev/sg3
  WD        SES Device        1007
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Well, if it's better for you, I can give you root access to a machine with this device connected to.

Thanks a lot for your time,
Andrea

Ewan Milne

2015-12-04 16:58 UTC #7 lore raw

Quoted 31 lines · Andrea Gelmini

Quoted 4 lines · James Bottomley

sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

root@glen:/home/gelma# sg_map -i
/dev/sg0  /dev/sda  ATA       Samsung SSD 850   1B6Q
/dev/sg1  /dev/sr0  HL-DT-ST  DVDRAM GU40N      QX23
/dev/sg2  /dev/sdb  WD        My Passport 0820  1007
/dev/sg3  WD        SES Device        1007

And following Douglas' instructions:

root@glen:/home/gelma# lsscsi -gs
[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda   /dev/sg0   1.02TB
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GU40N     QX23  /dev/sr0   /dev/sg1        -
[8:0:0:0]    disk    WD       My Passport 0820 1007  /dev/sdb   /dev/sg2   2.00TB
[8:0:0:1]    enclosu WD       SES Device       1007  -          /dev/sg3

root@glen:/home/gelma# sg_ses /dev/sg3
  WD        SES Device        1007
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Quoted 5 lines

Well, if it's better for you, I can give you root access to a machine with this device connected to.
Thanks a lot for your time,
Andrea

There seems to be a problem with the ses code if the device only reports Short Enclosure Status. We probably need to do something like:

drivers/scsi/ses.c +10 -0

index eba183c..065a528 100644
@@ -537,6 +537,15 @@ static int ses_intf_add(struct device *cdev,
        if (result)
                goto recv_failed;
 
+       /* If enclosure only supports Short Enclosure Status page (08),
+        * it returns that page regardless of what we requested, and
+        * only returns vendor-specific status.  There is nothing wrong
+        * with such enclosures, we just can't make use of them. */
+       if (hdr_buf[0] == 8) {
+               err = -ENODEV;
+               goto err_init_free_nomsg;
+       }
+
        len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
        buf = kzalloc(len, GFP_KERNEL);
        if (!buf)

@@ -646,9 +655,10 @@ static int ses_intf_add(struct device *cdev,
        kfree(ses_dev->page2);
        kfree(ses_dev->page1);
  err_init_free:
+       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",

err);
+ err_init_free_nomsg:

        kfree(ses_dev);
        kfree(hdr_buf);
-       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",
err);
        return err;

}

Otherwise we go off issuing commands for pages the device says it won't return. I don't see offhand how this would cause KASAN errors though.

-Ewan

James Bottomley

maintainer

2015-12-04 19:16 UTC #8 lore raw

Quoted 75 lines · Ewan Milne

Quoted 31 lines · Andrea Gelmini

Quoted 4 lines · James Bottomley

sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

root@glen:/home/gelma# sg_map -i
/dev/sg0  /dev/sda  ATA       Samsung SSD 850   1B6Q
/dev/sg1  /dev/sr0  HL-DT-ST  DVDRAM GU40N      QX23
/dev/sg2  /dev/sdb  WD        My Passport 0820  1007
/dev/sg3  WD        SES Device        1007

And following Douglas' instructions:

root@glen:/home/gelma# lsscsi -gs
[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda   /dev/sg0   1.02TB
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GU40N     QX23  /dev/sr0   /dev/sg1        -
[8:0:0:0]    disk    WD       My Passport 0820 1007  /dev/sdb   /dev/sg2   2.00TB
[8:0:0:1]    enclosu WD       SES Device       1007  -          /dev/sg3

root@glen:/home/gelma# sg_ses /dev/sg3
  WD        SES Device        1007
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Quoted 5 lines

Well, if it's better for you, I can give you root access to a machine with this device connected to.
Thanks a lot for your time,
Andrea

There seems to be a problem with the ses code if the device only reports Short Enclosure Status. We probably need to do something like:

drivers/scsi/ses.c +11 -1

index eba183c..065a528 100644
@@ -537,6 +537,15 @@ static int ses_intf_add(struct device *cdev,
        if (result)
                goto recv_failed;
 
+       /* If enclosure only supports Short Enclosure Status page (08),
+        * it returns that page regardless of what we requested, and
+        * only returns vendor-specific status.  There is nothing wrong
+        * with such enclosures, we just can't make use of them. */
+       if (hdr_buf[0] == 8) {
+               err = -ENODEV;
+               goto err_init_free_nomsg;
+       }
+
        len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
        buf = kzalloc(len, GFP_KERNEL);
        if (!buf)

@@ -646,9 +655,10 @@ static int ses_intf_add(struct device *cdev,
        kfree(ses_dev->page2);
        kfree(ses_dev->page1);
  err_init_free:
+       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",
 err);
+ err_init_free_nomsg:
        kfree(ses_dev);
        kfree(hdr_buf);
-       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",
 err);
        return err;

}

Quoted 2 lines

Otherwise we go off issuing commands for pages the device says it won't return. I don't see offhand how this would cause KASAN errors though.

I think we have two separate bugs. One is the usual USB devices getting into a new SCSI standard and getting it wrong. The other looks to be an enumeration problem ... possibly because ses2 added an indexed descriptor which current SES doesn't cope with.

Anyway, in concentrating on the USB problem first, I think we need to code a little more defensively, like this.

James

---

drivers/scsi/ses.c +19 -1

index dcb0d76..7d9cec5 100644
@@ -84,6 +84,7 @@ static void init_device_slot_control(unsigned char *dest_desc,
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
+	int ret;
 	unsigned char cmd[] = {
 		RECEIVE_DIAGNOSTIC,
 		1,		/* Set PCV bit */

@@ -92,9 +93,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	unsigned char recv_page_code;
 
-	return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
 				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
+	if (unlikely(!ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
 }
 
 static int ses_send_diag(struct scsi_device *sdev, int page_code,

Ewan Milne

2015-12-04 20:40 UTC #9 lore raw

Quoted 84 lines · James Bottomley

Quoted 75 lines · Ewan Milne

Quoted 31 lines · Andrea Gelmini

Quoted 4 lines · James Bottomley

sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

root@glen:/home/gelma# sg_map -i
/dev/sg0  /dev/sda  ATA       Samsung SSD 850   1B6Q
/dev/sg1  /dev/sr0  HL-DT-ST  DVDRAM GU40N      QX23
/dev/sg2  /dev/sdb  WD        My Passport 0820  1007
/dev/sg3  WD        SES Device        1007

And following Douglas' instructions:

root@glen:/home/gelma# lsscsi -gs
[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda   /dev/sg0   1.02TB
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GU40N     QX23  /dev/sr0   /dev/sg1        -
[8:0:0:0]    disk    WD       My Passport 0820 1007  /dev/sdb   /dev/sg2   2.00TB
[8:0:0:1]    enclosu WD       SES Device       1007  -          /dev/sg3

root@glen:/home/gelma# sg_ses /dev/sg3
  WD        SES Device        1007
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Quoted 5 lines

Well, if it's better for you, I can give you root access to a machine with this device connected to.
Thanks a lot for your time,
Andrea

There seems to be a problem with the ses code if the device only reports Short Enclosure Status. We probably need to do something like:

drivers/scsi/ses.c +11 -1

index eba183c..065a528 100644
@@ -537,6 +537,15 @@ static int ses_intf_add(struct device *cdev,
        if (result)
                goto recv_failed;
 
+       /* If enclosure only supports Short Enclosure Status page (08),
+        * it returns that page regardless of what we requested, and
+        * only returns vendor-specific status.  There is nothing wrong
+        * with such enclosures, we just can't make use of them. */
+       if (hdr_buf[0] == 8) {
+               err = -ENODEV;
+               goto err_init_free_nomsg;
+       }
+
        len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
        buf = kzalloc(len, GFP_KERNEL);
        if (!buf)

@@ -646,9 +655,10 @@ static int ses_intf_add(struct device *cdev,
        kfree(ses_dev->page2);
        kfree(ses_dev->page1);
  err_init_free:
+       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",
 err);
+ err_init_free_nomsg:
        kfree(ses_dev);
        kfree(hdr_buf);
-       sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n",
 err);
        return err;

}

Quoted 2 lines

Otherwise we go off issuing commands for pages the device says it won't return. I don't see offhand how this would cause KASAN errors though.

Quoted 2 lines

Anyway, in concentrating on the USB problem first, I think we need to code a little more defensively, like this.

This could certainly be the case for a USB device, however I have also had a report of this for regular SCSI attached devices with EncServ=1 that only supported Short Enclosure Status. The SES-3 spec 4.3.3 says that in this case, it "...shall always return the Short Enclosure Status diagnostic page, regardless of which SES diagnostic page is requested..." The person who reported the problem wanted to have the error messages removed about all his spec-compliant devices.

Short Enclosure Status appears to be vendor-specific, it doesn't look like we can do anything with it.

But anyway, there's still the other problem...

-Ewan

Quoted 47 lines

James

---

drivers/scsi/ses.c +19 -1

index dcb0d76..7d9cec5 100644
@@ -84,6 +84,7 @@ static void init_device_slot_control(unsigned char *dest_desc,
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
+	int ret;
 	unsigned char cmd[] = {
 		RECEIVE_DIAGNOSTIC,
 		1,		/* Set PCV bit */

@@ -92,9 +93,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	unsigned char recv_page_code;
 
-	return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
 				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
+	if (unlikely(!ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
 }
 
 static int ses_send_diag(struct scsi_device *sdev, int page_code,

James Bottomley

maintainer

2015-12-04 17:09 UTC #10 lore raw

In reply to Andrea Gelmini

Quoted 31 lines · Andrea Gelmini

Quoted 4 lines · James Bottomley

sg_map -i
in your system, you should see something with an inquiry string like enclosure. It's the /dev/sg<n> of that you need to run sg_ses on.

root@glen:/home/gelma# sg_map -i
/dev/sg0  /dev/sda  ATA       Samsung SSD 850   1B6Q
/dev/sg1  /dev/sr0  HL-DT-ST  DVDRAM GU40N      QX23
/dev/sg2  /dev/sdb  WD        My Passport 0820  1007
/dev/sg3  WD        SES Device        1007

And following Douglas' instructions:

root@glen:/home/gelma# lsscsi -gs
[0:0:0:0]    disk    ATA      Samsung SSD 850  1B6Q  /dev/sda   /dev/sg0   1.02TB
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GU40N     QX23  /dev/sr0   /dev/sg1        -
[8:0:0:0]    disk    WD       My Passport 0820 1007  /dev/sdb   /dev/sg2   2.00TB
[8:0:0:1]    enclosu WD       SES Device       1007  -          /dev/sg3

root@glen:/home/gelma# sg_ses /dev/sg3
  WD        SES Device        1007
Supported diagnostic pages:
  Supported Diagnostic Pages [sdp] [0x0]
  Short Enclosure Status (SES) [ses] [0x8]
  <unknown> [0x80]
  <unknown> [0x83]
  <unknown> [0x84]
  <unknown> [0x85]

Quoted 2 lines

Well, if it's better for you, I can give you root access to a machine with this device connected to.

Actually, that would be really helpful, since I only have access to one, very old, enclosure device. My ssh key is

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCnSsL4HoG8CXrJKA2CDAFJi+Ry8EUYgLluzX+zQ21iShnlCelp8djuoe+q+96WX2VGTnxQPJGAYUXNIW+rT9g3g8mgbjLAxYec4AHOgir/LlEBCARHo4SWue9L2if0nl6nLu1PudCQIKM747Pfzj1R4VfWboMU4m6KvkaFgP3rwJkZ96aNHI4ssRDh3EXvlD/vix6DZx0T7UEDpD3icc6ZyA2kmymtGCg1+nAWRTWImsnyhRFTIJvVw+xL7iR6GBoIJND82SpzP13Z95owuLm6QGPWow5Xgp3FLgoh+KezU7qXZh17Wh5ANRbgCNZJDc4fDBhXO+oNZmaU8bc0AW8R

Thanks,

James

Andrea Gelmini

author

2015-12-04 17:46 UTC #11 lore raw

Quoted 2 lines · James Bottomley

Actually, that would be really helpful, since I only have access to one, very old, enclosure device. My ssh key is

Ok.
Do you need same PC/Kernel of the report, or is it enough if I plug the USB in any PC and give you access?

Thanks,
Andrea

James Bottomley

maintainer

2015-12-04 19:04 UTC #12 lore raw

Quoted 6 lines · Andrea Gelmini

Quoted 2 lines · James Bottomley
Actually, that would be really helpful, since I only have access to one, very old, enclosure device. My ssh key is
Ok.
Do you need same PC/Kernel of the report, or is it enough if I plug the USB in any PC and give you access?

I think, since we suspect the device, it's enough to plug it into any PC running a current kernel.

Thanks,

James