spi/spi-fsl-espi.c: Add spi cs polarity support

Add CS polarity flag to be able to set the CS polarity via the DT property spi-cs-high.

---
 drivers/spi/spi-fsl-espi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index c27124a..2dc70953 100644
@@ -495,7 +495,7 @@ static int fsl_espi_setup(struct spi_device *spi)
 			&reg_base->csmode[spi->chip_select]);
 	/* mask out bits we are going to set */
 	cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH
-			 | CSMODE_REV);
+			 | CSMODE_REV | CSMODE_POL_1);
 
 	if (spi->mode & SPI_CPHA)
 		cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK;

@@ -503,6 +503,8 @@ static int fsl_espi_setup(struct spi_device *spi)
 		cs->hw_mode |= CSMODE_CI_INACTIVEHIGH;
 	if (!(spi->mode & SPI_LSB_FIRST))
 		cs->hw_mode |= CSMODE_REV;
+	if (!(spi->mode & SPI_CS_HIGH))
+		cs->hw_mode |= CSMODE_POL_1;
 
 	/* Handle the loop mode */
 	loop_mode = mpc8xxx_spi_read_reg(&reg_base->mode);

2.6.2

Hi,
any comments for this patches?

Regards
Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

Please don't send content free pings and please allow a reasonable time for review. People get busy, go on holiday, attend conferences and so on so unless there is some reason for urgency (like critical bug fixes) please allow at least a couple of weeks for review. Sending content free pings just adds to the mail volume (if they are seen at all) and if something has gone wrong you'll have to resend the patches anyway.