ARM64: dts: cpufreq: mt8173: Migrate mt8173-cpufreq to use OPPv2 bindings
Subsystems (3)
cover ARM64: dts: cpufreq: mt8173: Migrate mt8173-cpufreq to use OPPv2 bindings
This series tries to migrate mt8173-cpufreq driver to use operating-points-v2 bindings and add support for mt8173-cpufreq driver
Pi-Cheng Chen (2):
cpufreq: mt8173: migrate to use operating-points-v2 bindings
ARM64: dts: mt8173: Add CPU OPP, clock and regulator supply properties
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 18 ++++++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 +++++++++++++++++++++++++++++ drivers/cpufreq/mt8173-cpufreq.c | 20 +++++-- 3 files changed, 122 insertions(+), 6 deletions(-)
Signature · 1 line
1.9.1
PATCH 1/2 cpufreq: mt8173: migrate to use operating-points-v2 bindings
Modify mt8173-cpufreq driver to get OPP-sharing information and set up OPP table provided by operating-points-v2 bindings.
---
This patch is based on the series[1] which fixes some issues of mt8173-cpufreq driver.
[1] http://thread.gmane.org/gmane.linux.power-management.general/68692
--- drivers/cpufreq/mt8173-cpufreq.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
drivers/cpufreq/mt8173-cpufreq.c +14 -6
@@ -344,6 +344,9 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)unsigned long rate;int ret; +/* Mark the first owner of this CPU DVFS domain information */ +cpumask_set_cpu (cpu, &info->cpus); + cpu_dev =get_cpu_device (cpu);if (!cpu_dev) {pr_err ("failed to get cpu%d device\n" , cpu);
@@ -390,7 +393,15 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)/* Both presence and absence of sram regulator are valid cases. */ sram_reg =regulator_get_exclusive (cpu_dev,"sram" ); - ret =dev_pm_opp_of_add_table (cpu_dev); +/* Get OPP-sharing information from "operating-points-v2" bindings */ + ret =dev_pm_opp_of_get_sharing_cpus (cpu_dev, &info->cpus); +if (ret) { +pr_err ("failed to get OPP-sharing information for cpu%d\n" , + cpu); + goto out_free_resources; + } + + ret =dev_pm_opp_of_cpumask_add_table (&info->cpus);if (ret) {pr_warn ("no OPP table for cpu%d\n" , cpu); goto out_free_resources;
@@ -421,13 +432,10 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)*/ info->need_voltage_tracking = !IS_ERR (sram_reg); -/* CPUs in the same cluster share a clock and power domain. */ -cpumask_copy (&info->cpus, &cpu_topology[cpu].core_sibling); -return 0 ; out_free_opp_table: -dev_pm_opp_of_remove_table (cpu_dev); +dev_pm_opp_of_cpumask_remove_table (&info->cpus); out_free_resources:if (!IS_ERR (proc_reg))
@@ -453,7 +461,7 @@ static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)if (!IS_ERR (info->inter_clk))clk_put (info->inter_clk); -dev_pm_opp_of_remove_table (info->cpu_dev); +dev_pm_opp_of_cpumask_remove_table (&info->cpus); }static int mtk_cpufreq_init (struct cpufreq_policy *policy)
Signature · 1 line
1.9.1
Viresh Kumar
maintainerPATCH 1/2 cpufreq: mt8173: migrate to use operating-points-v2 bindings
drivers/cpufreq/mt8173-cpufreq.c static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) · line 349
Quoted 11 lines · Pi-Cheng Chen
drivers/cpufreq/mt8173-cpufreq.c +3
-0@@ -344,6 +344,9 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)unsigned long rate;int ret; +/* Mark the first owner of this CPU DVFS domain information */ +cpumask_set_cpu (cpu, &info->cpus); +
This is bad, sorry about that. Please update dev_pm_opp_of_get_sharing_cpus() to update this as well.
Signature · 1 line
viresh
PATCH 1/2 cpufreq: mt8173: migrate to use operating-points-v2 bindings
Quoted 9 lines · Viresh Kumar
Quoted 8 lines · Pi-Cheng Chen
drivers/cpufreq/mt8173-cpufreq.c +0
-0@@ -344,6 +344,9 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)unsigned long rate;int ret;
Quoted 6 lines
drivers/cpufreq/mt8173-cpufreq.c static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) · line 349
Quoted 3 lines
drivers/cpufreq/mt8173-cpufreq.c +3
-0+/* Mark the first owner of this CPU DVFS domain information */ +cpumask_set_cpu (cpu, &info->cpus); +This is bad, sorry about that. Please update
dev_pm_opp_of_get_sharing_cpus()to update this as well.
Hi Viresh,
Thanks for reviewing.
Will do it.
Pi-Cheng
Quoted 3 lines
--
viresh
PATCH 2/2 ARM64: dts: mt8173: Add CPU OPP, clock and regulator supply properties
In reply to Pi-Cheng ChenAdd operating-points-v2, clock, and regulator supply properties required by mt8173-cpufreq driver to enable it.
---
This patch is based on the patch[1] that adds underlying clock MUX for MT8173 which is needed by mt8173-cpufreq driver but not yet picked.
[1] http://article.gmane.org/gmane.linux.kernel.clk/325
--- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 18 ++++++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 +++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+)
arch/arm64/boot/dts/mediatek/mt8173-evb.dts +18 -0
@@ -405,6 +405,24 @@ status = "okay"; }; +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + &uart0 { status = "okay"; };
arch/arm64/boot/dts/mediatek/mt8173.dtsi +90 -0
120 lines not on this page · raw message
Signature · 1 line
1.9.1
Viresh Kumar
maintainerPATCH 2/2 ARM64: dts: mt8173: Add CPU OPP, clock and regulator supply properties
arch/arm64/boot/dts/mediatek/mt8173.dtsi line 30
Quoted 4 lines · Pi-Cheng Chen
arch/arm64/boot/dts/mediatek/mt8173.dtsi +4
-0+ cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp00 {
These have to named like: opp at 50700000, look at linux-next for this.
Signature · 1 line
viresh
PATCH 2/2 ARM64: dts: mt8173: Add CPU OPP, clock and regulator supply properties
Quoted 7 lines · Viresh Kumar
arch/arm64/boot/dts/mediatek/mt8173.dtsi line 30
Quoted 4 lines · Pi-Cheng Chen
arch/arm64/boot/dts/mediatek/mt8173.dtsi +4
-0+ cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp00 {These have to named like: opp at 50700000, look at linux-next for this.
Will do it.
Thanks,
Pi-Cheng
Quoted 3 lines
--
viresh