Skip to contentSkip to conversation

regulator: add regulator_sync_voltage inline dummy

PATCH In review Arnd Bergmann 2 participants 4 messages Dec 8, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: add regulator_sync_voltage inline dummy

Only one driver calls regulator_sync_voltage(), but that driver can currently be built with CONFIG_REGULATOR disabled, producing this build error:

drivers/cpufreq/tegra124-cpufreq.c: In function 'tegra124_cpu_switch_to_pllx':
drivers/cpufreq/tegra124-cpufreq.c:68:2: error: implicit declaration of function 'regulator_sync_voltage' [-Werror=implicit-function-declaration]
regulator_sync_voltage(priv->vdd_cpu_reg);

This modifies the API header so we provide a static inline function with the same prototype as the normal function of this name. This matches what we do for all other regulator API functions and avoids the build error.

---
 include/linux/regulator/consumer.h | 5 +++++
 1 file changed, 5 insertions(+)
include/linux/regulator/consumer.h +5 -0
index 48603506f8de..d45e2e99396a 100644
@@ -458,6 +458,11 @@ static inline int regulator_get_voltage(struct regulator *regulator)
 	return -EINVAL;
 }
 
+static inline int regulator_sync_voltage(struct regulator *regulator)
+{
+	return 0;
+}
+
 static inline int regulator_is_supported_voltage(struct regulator *regulator,
 				   int min_uV, int max_uV)
 {
Signature · 1 line
2.1.0.rc2
maintainer
#1 lore raw
Quoted 4 lines · Arnd Bergmann

This modifies the API header so we provide a static inline function with the same prototype as the normal function of this name. This matches what we do for all other regulator API functions and avoids the build error.

We don't do this for *all* regulator API functions - there's some where
using them strongly suggests that there is actually a dependency on the
regulator API. This does seem like it might be falling into the
specialist category...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151208/488de195/attachment.sig>

#2 lore raw
Quoted 7 lines · On Tuesday 08 December 2015 16:37:39 Mark Brown wrote:
Quoted 4 lines · Arnd Bergmann

This modifies the API header so we provide a static inline function with the same prototype as the normal function of this name. This matches what we do for all other regulator API functions and avoids the build error.

Quoted 5 lines

We don't do this for *all* regulator API functions - there's some where using them strongly suggests that there is actually a dependency on the regulator API. This does seem like it might be falling into the specialist category...

Ok, got it.

I guess we'll want something like the patch below in the cpufreq git, right?

Arnd

drivers/cpufreq/Kconfig.arm +1 -1
index 235a1ba73d92..b1f8a73e5a94 100644
@@ -226,7 +226,7 @@ config ARM_TEGRA20_CPUFREQ
 
 config ARM_TEGRA124_CPUFREQ
 	tristate "Tegra124 CPUFreq support"
-	depends on ARCH_TEGRA && CPUFREQ_DT
+	depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
 	default y
 	help
 	  This adds the CPUFreq driver support for Tegra124 SOCs.
maintainer
#3 lore raw
Quoted 11 lines · Arnd Bergmann
Quoted 6 lines · On Tuesday 08 December 2015 16:37:39 Mark Brown wrote:

On Tue, Dec 08, 2015 at 04:43:35PM +0100, Arnd Bergmann wrote:

We don't do this for *all* regulator API functions - there's some where using them strongly suggests that there is actually a dependency on the regulator API. This does seem like it might be falling into the specialist category...

Ok, got it.

I guess we'll want something like the patch below in the cpufreq git, right?

Yes, exactly - though looking at the code I'm pretty unclear on what the
authors think the use of _sync_voltage() is doing in the first place so
it may be even better to just remove the call. It seems to have been
included in the first commit so there's not changelog explaining things
and there's no comment either. I'd *expect* it to be a noop as far as I
can see.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151208/ee54981d/attachment.sig>