Skip to contentSkip to conversation

ARM: at91/dt: Add Support for the L+G VInCo platform

PATCH Superseded Gregory CLEMENT 2 participants 2 messages Dec 17, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: at91/dt: Add Support for the L+G VInCo platform

The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with:
- an RS-485 port
- 2 Ethernet ports
- a wireless M-BUS
- a 4G modem
- a 4MB SPI flash
- a 4GB eMMC

---
Changelog

v2 -> v3:
- removed bootargs pointed by Alexandre Belloni
- removed leftovers clock definition pointed by Alexandre Belloni

v1 -> v2:
- Fixed rtc compatible name from "rx8900" to "epson,rx8900" as pointed by Alexandre Belloni

 arch/arm/boot/dts/Makefile       |   3 +-
 arch/arm/boot/dts/at91-vinco.dts | 256 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 258 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/at91-vinco.dts
arch/arm/boot/dts/Makefile +2 -1
index 30bbc37..75562ab 100644
@@ -49,7 +49,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	sama5d35ek.dtb \
 	sama5d36ek.dtb \
 	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
 dtb-$(CONFIG_ARCH_ATLAS6) += \
 	atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_ATLAS7) += \
arch/arm/boot/dts/at91-vinco.dts new file +256 -0

256 lines not on this page · raw message

Signature · 1 line
2.5.0
#1 lore raw

PATCH v3 1/1 ARM: at91/dt: Add Support for the L+G VInCo platform

Quoted 10 lines · Gregory CLEMENT

The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with:
- an RS-485 port
- 2 Ethernet ports
- a wireless M-BUS
- a 4G modem
- a 4MB SPI flash
- a 4GB eMMC

Signature · 3 lines
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com