virtio_ring: use smp_store_mb
Subsystems (5)
Michael S. Tsirkin
maintainerPATCH 1/1 virtio_ring: use smp_store_mb
We need a full barrier after writing out event index, using smp_store_mb there seems better than open-coding.
As usual, we need a wrapper to account for strong barriers/non smp.
It's tempting to use this in vhost as well, for that, we'll need a variant of smp_store_mb that works on __user pointers.
---
Seems to give a speedup on my box but I'm less sure about this one. E.g. as xchng faster than mfence on all/most intel CPUs? Anyone has an opinion?
include/linux/virtio_ring.h | 14 ++++++++++++++ drivers/virtio/virtio_ring.c | 15 +++++++++------ 2 files changed, 23 insertions(+), 6 deletions(-)
include/linux/virtio_ring.h +14 -0
@@ -47,6 +47,20 @@ static inline void virtio_wmb(bool weak_barriers)wmb (); } +static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +} +static inline __virtio16 virtio_load_acquire (bool weak_barriers,__virtio16 *p) {if (!weak_barriers) {
drivers/virtio/virtio_ring.c +9 -6
@@ -517,10 +517,10 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len)/* If we expect an interrupt for the next entry, tell host * by writing event index and flush out the write before * the read in the next get_buf call. */ -if (!(vq->avail_flags_shadow &VRING_AVAIL_F_NO_INTERRUPT )) { -vring_used_event (&vq->vring) =cpu_to_virtio16 (_vq->vdev, vq->last_used_idx); -virtio_mb (vq->weak_barriers); - } +if (!(vq->avail_flags_shadow &VRING_AVAIL_F_NO_INTERRUPT )) +virtio_store_mb (vq->weak_barriers, + &vring_used_event (&vq->vring), +cpu_to_virtio16 (_vq->vdev, vq->last_used_idx));#ifdef DEBUG vq->last_add_time_valid = false;
@@ -653,8 +653,11 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) }/* TODO: tune this threshold */ bufs = (u16)(vq->avail_idx_shadow - vq->last_used_idx) *3 /4 ; -vring_used_event (&vq->vring) =cpu_to_virtio16 (_vq->vdev, vq->last_used_idx + bufs); -virtio_mb (vq->weak_barriers); + +virtio_store_mb (vq->weak_barriers, + &vring_used_event (&vq->vring), +cpu_to_virtio16 (_vq->vdev, vq->last_used_idx + bufs)); +if (unlikely ((u16)(virtio16_to_cpu (_vq->vdev, vq->vring.used->idx) - vq->last_used_idx) > bufs)) {END_USE (vq);return false;
Signature · 1 line
MST
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines · Michael S. Tsirkin
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}
This is a different barrier depending on SMP, that seems wrong.
smp_mb(), as (should be) used by smp_store_mb() does not provide a barrier against IO. mb() otoh does.
Since this is virtIO I would expect you always want mb().
Michael S. Tsirkin
maintainerQuoted 16 lines · Peter Zijlstra
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines · Michael S. Tsirkin
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}This is a different barrier depending on SMP, that seems wrong.
Of course it's wrong in the sense that it's suboptimal on UP. What we would really like is to have, on UP, exactly the same barrier as on SMP. This is because a UP guest can run on an SMP host.
But Linux doesn't provide this ability: if CONFIG_SMP is not defined is optimizes most barriers out to a compiler barrier.
Consider for example x86: what we want is xchg (NOT mfence - see below for why) but if built without CONFIG_SMP smp_store_mb does not include this.
Quoted 4 lines
smp_mb(), as (should be) used bysmp_store_mb()does not provide a barrier against IO.mb()otoh does.Since this is virtIO I would expect you always want
mb().
No because it's VIRTio not real io :) It just switches to the hyprevisor mode - kind of like a function call really.
The weak_barriers flag is cleared for when it's used
with real devices with real IO.
All this is explained in some detail at the top of include/linux/virtio.h
Signature · 1 line
MST
Quoted 23 lines · Michael S. Tsirkin
Quoted 16 lines · Peter Zijlstra
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines · Michael S. Tsirkin
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}This is a different barrier depending on SMP, that seems wrong.
Of course it's wrong in the sense that it's suboptimal on UP. What we would really like is to have, on UP, exactly the same barrier as on SMP. This is because a UP guest can run on an SMP host.
Quoted 7 lines
But Linux doesn't provide this ability: if
CONFIG_SMPis not defined is optimizes most barriers out to a compiler barrier.Consider for example x86: what we want is xchg (NOT mfence - see below for why) but if built without
CONFIG_SMPsmp_store_mbdoes not include this.
You could of course go fix that instead of mutilating things into sort-of functional state.
Quoted 7 lines
Quoted 6 lines
smp_mb(), as (should be) used bysmp_store_mb()does not provide a barrier against IO.mb()otoh does.Since this is virtIO I would expect you always want
mb().
Quoted 8 lines
No because it's VIRTio not real io :) It just switches to the hyprevisor mode - kind of like a function call really.
Theweak_barriersflag is cleared for when it's used
with real devices with real IO.All this is explained in some detail at the top of
include/linux/virtio.h
I did read that, it didn't make any sense wrt the code below it.
For instance it seems to imply weak_barriers is for smp like stuff while !weak_barriers is for actual devices.
But then you go use dma_*mb() ops, which are specifially for devices only for weak_barrier.
Michael S. Tsirkin
maintainerQuoted 28 lines · Peter Zijlstra
Quoted 27 lines · Michael S. Tsirkin
Quoted 16 lines · Peter Zijlstra
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines · Michael S. Tsirkin
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}This is a different barrier depending on SMP, that seems wrong.
Of course it's wrong in the sense that it's suboptimal on UP. What we would really like is to have, on UP, exactly the same barrier as on SMP. This is because a UP guest can run on an SMP host.
But Linux doesn't provide this ability: if
CONFIG_SMPis not defined is optimizes most barriers out to a compiler barrier.
Quoted 6 lines
Quoted 3 lines
Consider for example x86: what we want is xchg (NOT mfence - see below for why) but if built without
CONFIG_SMPsmp_store_mbdoes not include this.You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically between CONFIG_SMP and !CONFIG_SMP on all architectures.
Do you think this is something of general usefulness, outside virtio?
Quoted 16 lines
Quoted 7 lines
Quoted 6 lines
smp_mb(), as (should be) used bysmp_store_mb()does not provide a barrier against IO.mb()otoh does.Since this is virtIO I would expect you always want
mb().Quoted 8 lines
No because it's VIRTio not real io :) It just switches to the hyprevisor mode - kind of like a function call really.
Theweak_barriersflag is cleared for when it's used
with real devices with real IO.All this is explained in some detail at the top of
include/linux/virtio.h
Quoted 7 lines
I did read that, it didn't make any sense wrt the code below it.
For instance it seems to imply
weak_barriersis for smp like stuff while !weak_barriers is for actual devices.But then you go use dma_*mb() ops, which are specifially for devices only for
weak_barrier.
Yes the dma_*mb thing is a kind of an interface misuse. It's an optimization for UP introduced here:
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9
Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930
virtio_ring: Update weak barriers to use dma_wmb/rmb
This change makes it so that instead of using smp_wmb/rmb which varies depending on the kernel configuration we can can use dma_wmb/rmb which for most architectures should be equal to or slightly more strict than smp_wmb/rmb.
The advantage to this is that these barriers are available to uniprocessor builds as well so the performance should improve under such a configuration.
but given the confusion this causes, I'm inclined to revert this, and later switch to for cleaner API if that appears. Cc Alexander (at the new address).
Signature · 1 line
MST
Quoted 12 lines · Michael S. Tsirkin
Quoted 3 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.
Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.
Michael S. Tsirkin
maintainerQuoted 19 lines · Peter Zijlstra
Quoted 12 lines · Michael S. Tsirkin
Quoted 3 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
Quoted 8 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.
Thanks, will take a stub at this.
Michael S. Tsirkin
maintainerQuoted 19 lines · Peter Zijlstra
Quoted 12 lines · Michael S. Tsirkin
Quoted 3 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
Quoted 8 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.
Thanks, will take a stub at this.
Michael S. Tsirkin
maintainernew barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Peter ZijlstraQuoted 13 lines · Peter Zijlstra
Quoted 12 lines · Michael S. Tsirkin
Quoted 3 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.
Quoted 5 lines
Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
When I wrote this, I assumed there are no other users, and I'm still not sure there are other users at the moment. Do you see a problem then?
Quoted 3 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
Or another guest kernel on an SMP host.
Quoted 3 lines
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.
So I looked and I was only able to find other another possible user in Xen.
Cc Xen folks.
I noticed that drivers/xen/xenbus/xenbus_comms.c uses full memory barriers to communicate with the other side. For example:
/* Must write data /after/ reading the consumer index. * */
mb();
memcpy(dst, data, avail);
data += avail;
len -= avail;
/* Other side must not see new producer until data is * there. */
wmb();
intf->req_prod += avail;
/* Implies mb(): other side will see the updated producer. */
notify_remote_via_evtchn(xen_store_evtchn);To me, it looks like for guests compiled with CONFIG_SMP, smp_wmb and smp_mb would be sufficient, so mb() and wmb() here are only needed if
a non-SMP guest runs on an SMP host.
Is my analysis correct?
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()
I'd like to get confirmation from Xen folks before posting this patchset.
Comments/suggestions?
--
compile-tested only.
drivers/xen/xenbus/xenbus_comms.c +5 -4
@@ -36,6 +36,7 @@#include <linux/interrupt.h> #include <linux/sched.h> #include <linux/err.h> +#include <linux/virtio_ring.h> #include <xen/xenbus.h> #include <asm/xen/hypervisor.h> #include <xen/events.h>
@@ -123,14 +124,14 @@ int xb_write(const void *data, unsigned len) avail = len;/* Must write data /after/ reading the consumer index. */ -mb (); +virtio_mb (true);memcpy (dst, data, avail); data += avail; len -= avail;/* Other side must not see new producer until data is there. */ -wmb (); +virtio_wmb (true); intf->req_prod += avail;/* Implies mb(): other side will see the updated producer. */
@@ -180,14 +181,14 @@ int xb_read(void *data, unsigned len) avail = len;/* Must read data /after/ reading the producer index. */ -rmb (); +virtio_rmb (true);memcpy (data, src, avail); data += avail; len -= avail;/* Other side must not see free space until we've copied out */ -mb (); +virtio_mb (true); intf->rsp_cons += avail;pr_debug ("Finished read of %i bytes (%i to go)\n" , avail, len);
Signature · 1 line
MST
Re: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
Quoted 49 lines · Michael S. Tsirkin
Quoted 11 lines · Peter Zijlstra
Quoted 10 lines · Michael S. Tsirkin
Quoted 2 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.Quoted 4 lines
Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
When I wrote this, I assumed there are no other users, and I'm still not sure there are other users at the moment. Do you see a problem then?
Quoted 3 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
Or another guest kernel on an SMP host.
Quoted 3 lines
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.So I looked and I was only able to find other another possible user in Xen.
Cc Xen folks.
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);
Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
Correct. The reason full barriers are used is so non-SMP guests still function correctly. It is certainly inefficient.
Quoted 10 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
Quoted 8 lines
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()I'd like to get confirmation from Xen folks before posting this patchset.
Comments/suggestions?
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
~Andrew
Re: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
Quoted 10 lines · Andrew Cooper
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if
CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
So a regular SMP kernel emits the LOCK prefix and will patch it out with a DS prefix (iirc) when it finds but a single CPU. So for those you could easily do this.
However an UP kernel will not emit the LOCK and do no patching.
So if you're willing to make CONFIG_PARAVIRT depend on CONFIG_SMP or similar, this is doable.
I don't see people going to allow emitting the LOCK prefix (and growing the kernel text size) for UP kernels.
Michael S. Tsirkin
maintainerRe: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
Quoted 12 lines · Peter Zijlstra
Quoted 10 lines · Andrew Cooper
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if
CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
Quoted 8 lines
So a regular SMP kernel emits the LOCK prefix and will patch it out with a DS prefix (iirc) when it finds but a single CPU. So for those you could easily do this.
However an UP kernel will not emit the LOCK and do no patching.
So if you're willing to make
CONFIG_PARAVIRTdepend onCONFIG_SMPor similar, this is doable.
One of the uses for virtio is to allow testing an existing kernel on kvm just by loading a module, and this will break this usecase.
Quoted 2 lines
I don't see people going to allow emitting the LOCK prefix (and growing the kernel text size) for UP kernels.
Thinking about this more, maybe __smp_*mb is a better set of names.
The nice thing about it is that we can then have generic code that does basically
#ifdef CONFIG_SMP
#define smp_mb() __smp_mb()
#else
#define smp_mb() barrier()
#endif
and reuse this on all architectures.
So instead of a maintainance burden, we are actually removing code duplication.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Peter ZijlstraQuoted 12 lines · Peter Zijlstra
Quoted 10 lines · Andrew Cooper
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if
CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
Quoted 8 lines
So a regular SMP kernel emits the LOCK prefix and will patch it out with a DS prefix (iirc) when it finds but a single CPU. So for those you could easily do this.
However an UP kernel will not emit the LOCK and do no patching.
So if you're willing to make
CONFIG_PARAVIRTdepend onCONFIG_SMPor similar, this is doable.
One of the uses for virtio is to allow testing an existing kernel on kvm just by loading a module, and this will break this usecase.
Quoted 2 lines
I don't see people going to allow emitting the LOCK prefix (and growing the kernel text size) for UP kernels.
Thinking about this more, maybe __smp_*mb is a better set of names.
The nice thing about it is that we can then have generic code that does basically
#ifdef CONFIG_SMP
#define smp_mb() __smp_mb()
#else
#define smp_mb() barrier()
#endif
and reuse this on all architectures.
So instead of a maintainance burden, we are actually removing code duplication.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRFC PATCH 1/1 smp_store_mb should use smp_mb
On some architectures smp_store_mb() calls mb() which is stronger than implied by both the name and the documentation.
smp_store_mb is only used by core kernel code at the moment, so we know no one mis-uses it for an MMIO barrier.
Make it call smp_mb consistently before some arch-specific code uses it as such by mistake.
---
Note: I'm guessing an ack from arch maintainers will be needed, but I'm working on a bigger cleanup moving a bunch of duplicated code into asm-generic/barrier.h which depends on this, so not Cc'ing widely yet.
Please Ack if appropriate but do not merge yet.
arch/ia64/include/asm/barrier.h +1 -1
@@ -77,7 +77,7 @@ do { \ ___p1; \ }) -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)/* * The group barrier in front of the rsm & ssm are necessary to ensure
arch/powerpc/include/asm/barrier.h +1 -1
@@ -34,7 +34,7 @@#define rmb () __asm__ __volatile__ ("sync" : : : "memory")#define wmb () __asm__ __volatile__ ("sync" : : : "memory") -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#ifdef __SUBARCH_HAS_LWSYNC# define SMPWMB LWSYNC
arch/s390/include/asm/barrier.h +1 -1
@@ -36,7 +36,7 @@#define smp_mb__before_atomic () smp_mb()#define smp_mb__after_atomic () smp_mb() -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#define smp_store_release (p, v) \ do { \
include/asm-generic/barrier.h +1 -1
@@ -93,7 +93,7 @@#endif /* CONFIG_SMP */ #ifndef smp_store_mb -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#endif #ifndef smp_mb__before_atomic
Michael S. Tsirkin
maintainerRFC PATCH 1/1 smp_store_mb should use smp_mb
In reply to Michael S. TsirkinOn some architectures smp_store_mb() calls mb() which is stronger than implied by both the name and the documentation.
smp_store_mb is only used by core kernel code at the moment, so we know no one mis-uses it for an MMIO barrier.
Make it call smp_mb consistently before some arch-specific code uses it as such by mistake.
---
Note: I'm guessing an ack from arch maintainers will be needed, but I'm working on a bigger cleanup moving a bunch of duplicated code into asm-generic/barrier.h which depends on this, so not Cc'ing widely yet.
Please Ack if appropriate but do not merge yet.
arch/ia64/include/asm/barrier.h +1 -1
@@ -77,7 +77,7 @@ do { \ ___p1; \ }) -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)/* * The group barrier in front of the rsm & ssm are necessary to ensure
arch/powerpc/include/asm/barrier.h +1 -1
@@ -34,7 +34,7 @@#define rmb () __asm__ __volatile__ ("sync" : : : "memory")#define wmb () __asm__ __volatile__ ("sync" : : : "memory") -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#ifdef __SUBARCH_HAS_LWSYNC# define SMPWMB LWSYNC
arch/s390/include/asm/barrier.h +1 -1
@@ -36,7 +36,7 @@#define smp_mb__before_atomic () smp_mb()#define smp_mb__after_atomic () smp_mb() -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#define smp_store_release (p, v) \ do { \
include/asm-generic/barrier.h +1 -1
@@ -93,7 +93,7 @@#endif /* CONFIG_SMP */ #ifndef smp_store_mb -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#endif #ifndef smp_mb__before_atomic
Michael S. Tsirkin
maintainerRFC PATCH 1/1 smp_store_mb should use smp_mb
In reply to Michael S. TsirkinOn some architectures smp_store_mb() calls mb() which is stronger than implied by both the name and the documentation.
smp_store_mb is only used by core kernel code at the moment, so we know no one mis-uses it for an MMIO barrier.
Make it call smp_mb consistently before some arch-specific code uses it as such by mistake.
---
Note: I'm guessing an ack from arch maintainers will be needed, but I'm working on a bigger cleanup moving a bunch of duplicated code into asm-generic/barrier.h which depends on this, so not Cc'ing widely yet.
Please Ack if appropriate but do not merge yet.
arch/ia64/include/asm/barrier.h +1 -1
@@ -77,7 +77,7 @@ do { \ ___p1; \ }) -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)/* * The group barrier in front of the rsm & ssm are necessary to ensure
arch/powerpc/include/asm/barrier.h +1 -1
@@ -34,7 +34,7 @@#define rmb () __asm__ __volatile__ ("sync" : : : "memory")#define wmb () __asm__ __volatile__ ("sync" : : : "memory") -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#ifdef __SUBARCH_HAS_LWSYNC# define SMPWMB LWSYNC
arch/s390/include/asm/barrier.h +1 -1
@@ -36,7 +36,7 @@#define smp_mb__before_atomic () smp_mb()#define smp_mb__after_atomic () smp_mb() -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#define smp_store_release (p, v) \ do { \
include/asm-generic/barrier.h +1 -1
@@ -93,7 +93,7 @@#endif /* CONFIG_SMP */ #ifndef smp_store_mb -#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); mb(); } while (0) +#define smp_store_mb (var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)#endif #ifndef smp_mb__before_atomic
Michael S. Tsirkin
maintainerRe: new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Peter ZijlstraQuoted 12 lines · Peter Zijlstra
Quoted 10 lines · Andrew Cooper
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if
CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
Quoted 8 lines
So a regular SMP kernel emits the LOCK prefix and will patch it out with a DS prefix (iirc) when it finds but a single CPU. So for those you could easily do this.
However an UP kernel will not emit the LOCK and do no patching.
So if you're willing to make
CONFIG_PARAVIRTdepend onCONFIG_SMPor similar, this is doable.
One of the uses for virtio is to allow testing an existing kernel on kvm just by loading a module, and this will break this usecase.
Quoted 2 lines
I don't see people going to allow emitting the LOCK prefix (and growing the kernel text size) for UP kernels.
Thinking about this more, maybe __smp_*mb is a better set of names.
The nice thing about it is that we can then have generic code that does basically
#ifdef CONFIG_SMP
#define smp_mb() __smp_mb()
#else
#define smp_mb() barrier()
#endif
and reuse this on all architectures.
So instead of a maintainance burden, we are actually removing code duplication.
Signature · 1 line
MST
Re: new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Andrew CooperQuoted 10 lines · Andrew Cooper
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if
CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
So a regular SMP kernel emits the LOCK prefix and will patch it out with a DS prefix (iirc) when it finds but a single CPU. So for those you could easily do this.
However an UP kernel will not emit the LOCK and do no patching.
So if you're willing to make CONFIG_PARAVIRT depend on CONFIG_SMP or similar, this is doable.
I don't see people going to allow emitting the LOCK prefix (and growing the kernel text size) for UP kernels.
Re: new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Michael S. TsirkinQuoted 49 lines · Michael S. Tsirkin
Quoted 11 lines · Peter Zijlstra
Quoted 10 lines · Michael S. Tsirkin
Quoted 2 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.Quoted 4 lines
Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
When I wrote this, I assumed there are no other users, and I'm still not sure there are other users at the moment. Do you see a problem then?
Quoted 3 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
Or another guest kernel on an SMP host.
Quoted 3 lines
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.So I looked and I was only able to find other another possible user in Xen.
Cc Xen folks.
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);
Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
Correct. The reason full barriers are used is so non-SMP guests still function correctly. It is certainly inefficient.
Quoted 10 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
Quoted 8 lines
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()I'd like to get confirmation from Xen folks before posting this patchset.
Comments/suggestions?
Very much +1 for fixing this.
Those names would be fine, but they do add yet another set of options in an already-complicated area.
An alternative might be to have the regular smp_{w,r,}mb() not revert back to nops if CONFIG_PARAVIRT, or perhaps if pvops have detected a non-native environment. (I don't know how feasible this suggestion is, however.)
~Andrew
Re: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Michael S. TsirkinQuoted 19 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);
Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
Quoted 4 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
Quoted 8 lines
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()
The smp_ prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.
David
Michael S. Tsirkin
maintainerRe: [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
Quoted 41 lines · David Vrabel
Quoted 19 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
Quoted 9 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
Quoted 8 lines
Quoted 3 lines
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()The
smp_prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.David
Guest kernel - yes. But it's only needed because you are running on an SMP host.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to David VrabelQuoted 41 lines · David Vrabel
Quoted 19 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
Quoted 9 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
Quoted 8 lines
Quoted 3 lines
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()The
smp_prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.David
Guest kernel - yes. But it's only needed because you are running on an SMP host.
Signature · 1 line
MST
Re: [Qemu-devel] [Xen-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to David VrabelQuoted 24 lines · David Vrabel
Quoted 23 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.
Quoted 7 lines
Quoted 1 line
Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
inner-shareable barriers are certainly OK. In this case there would be also a switch from dsb to dmb barriers, which I also think should be OK.
What about all the mb() and wmb() in RING_PUSH_REQUESTS and RING_PUSH_RESPONSES in include/xen/interface/io/ring.h ?
Quoted 15 lines
Quoted 4 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
Quoted 8 lines
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()The
smp_prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.
Re: [Qemu-devel] new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to David VrabelQuoted 24 lines · David Vrabel
Quoted 23 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.
Quoted 7 lines
Quoted 1 line
Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
inner-shareable barriers are certainly OK. In this case there would be also a switch from dsb to dmb barriers, which I also think should be OK.
What about all the mb() and wmb() in RING_PUSH_REQUESTS and RING_PUSH_RESPONSES in include/xen/interface/io/ring.h ?
Quoted 15 lines
Quoted 4 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
Quoted 8 lines
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()The
smp_prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.
Re: new barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Michael S. TsirkinQuoted 19 lines · Michael S. Tsirkin
I noticed that
drivers/xen/xenbus/xenbus_comms.cuses full memory barriers to communicate with the other side. For example:/* Must write data /after/ reading the consumer index. * */ mb(); memcpy(dst, data, avail); data += avail; len -= avail; /* Other side must not see new producer until data is * there. */ wmb(); intf->req_prod += avail; /* Implies mb(): other side will see the updated producer. */ notify_remote_via_evtchn(xen_store_evtchn);
Quoted 5 lines
To me, it looks like for guests compiled with
CONFIG_SMP,smp_wmbandsmp_mbwould be sufficient, somb()andwmb()here are only needed if
a non-SMP guest runs on an SMP host.Is my analysis correct?
For x86, yes.
For arm/arm64 I think so, but would prefer one of the Xen arm maintainers to confirm. In particular, whether inner-shareable barriers are sufficient for memory shared with the hypervisor.
Quoted 4 lines
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
Quoted 8 lines
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()
The smp_ prefix doesn't make a lot of sense to me here since these barriers are going to be the same whether the kernel is SMP or not.
David
Michael S. Tsirkin
maintainernew barrier type for paravirt (was Re: [PATCH] virtio_ring: use smp_store_mb)
In reply to Peter ZijlstraQuoted 13 lines · Peter Zijlstra
Quoted 12 lines · Michael S. Tsirkin
Quoted 3 lines · Peter Zijlstra
You could of course go fix that instead of mutilating things into sort-of functional state.
Yes, we'd just need to touch all architectures, all for the sake of UP which almost no one uses. Basically, we need APIs that explicitly are
for talking to another kernel on a different CPU on the same SMP system, and implemented identically betweenCONFIG_SMPand !CONFIG_SMP on all architectures.
Quoted 5 lines
Quoted 2 lines
Do you think this is something of general usefulness, outside virtio?
I'm not aware of any other case, but if there are more parts of virt that need this then I see no problem adding it.
When I wrote this, I assumed there are no other users, and I'm still not sure there are other users at the moment. Do you see a problem then?
Quoted 3 lines
That is, virt in general is the only use-case that I can think of, because this really is an artifact of interfacing with an SMP host while running an UP kernel.
Or another guest kernel on an SMP host.
Quoted 3 lines
But I'm really not familiar with virt, so I do not know if there's more sites outside of virtio that could use this.
Touching all archs is a tad tedious, but its fairly straight forward.
So I looked and I was only able to find other another possible user in Xen.
Cc Xen folks.
I noticed that drivers/xen/xenbus/xenbus_comms.c uses full memory barriers to communicate with the other side. For example:
/* Must write data /after/ reading the consumer index. * */
mb();
memcpy(dst, data, avail);
data += avail;
len -= avail;
/* Other side must not see new producer until data is * there. */
wmb();
intf->req_prod += avail;
/* Implies mb(): other side will see the updated producer. */
notify_remote_via_evtchn(xen_store_evtchn);To me, it looks like for guests compiled with CONFIG_SMP, smp_wmb and smp_mb would be sufficient, so mb() and wmb() here are only needed if
a non-SMP guest runs on an SMP host.
Is my analysis correct?
So what I'm suggesting is something like the below patch, except instead of using virtio directly, a new set of barriers that behaves identically for SMP and non-SMP guests will be introduced.
And of course the weak barriers flag is not needed for Xen - that's a virtio only thing.
For example:
smp_pv_wmb()smp_pv_rmb()smp_pv_mb()
I'd like to get confirmation from Xen folks before posting this patchset.
Comments/suggestions?
--
compile-tested only.
drivers/xen/xenbus/xenbus_comms.c +5 -4
@@ -36,6 +36,7 @@#include <linux/interrupt.h> #include <linux/sched.h> #include <linux/err.h> +#include <linux/virtio_ring.h> #include <xen/xenbus.h> #include <asm/xen/hypervisor.h> #include <xen/events.h>
@@ -123,14 +124,14 @@ int xb_write(const void *data, unsigned len) avail = len;/* Must write data /after/ reading the consumer index. */ -mb (); +virtio_mb (true);memcpy (dst, data, avail); data += avail; len -= avail;/* Other side must not see new producer until data is there. */ -wmb (); +virtio_wmb (true); intf->req_prod += avail;/* Implies mb(): other side will see the updated producer. */
@@ -180,14 +181,14 @@ int xb_read(void *data, unsigned len) avail = len;/* Must read data /after/ reading the producer index. */ -rmb (); +virtio_rmb (true);memcpy (data, src, avail); data += avail; len -= avail;/* Other side must not see free space until we've copied out */ -mb (); +virtio_mb (true); intf->rsp_cons += avail;pr_debug ("Finished read of %i bytes (%i to go)\n" , avail, len);
Signature · 1 line
MST
Quoted 2 lines · Michael S. Tsirkin
Seems to give a speedup on my box but I'm less sure about this one. E.g. as xchng faster than mfence on all/most intel CPUs? Anyone has an opinion?
Would help if you Cc people who would actually know this :-)
Yes, we've recently established that xchg is indeed faster than mfence on at least recent machines, see:
lkml.kernel.org/r/CA+55aFynbkeuUGs9s-q+fLY6MeRBA6MjEyWWbbe7A5AaqsAknw@mail.gmail.com
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}
Note that virtio_mb() is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops for weak_barriers, while virtio_mb() uses smp_mb().
As previously stated, smp_mb() does not cover the same memory domains as dma_mb() would.
Quoted 2 lines · Michael S. Tsirkin
Seems to give a speedup on my box but I'm less sure about this one. E.g. as xchng faster than mfence on all/most intel CPUs? Anyone has an opinion?
Would help if you Cc people who would actually know this :-)
Yes, we've recently established that xchg is indeed faster than mfence on at least recent machines, see:
lkml.kernel.org/r/CA+55aFynbkeuUGs9s-q+fLY6MeRBA6MjEyWWbbe7A5AaqsAknw@mail.gmail.com
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 13 lines
include/linux/virtio_ring.h +13
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + { +WRITE_ONCE (*p, v); +mb (); + } +}
Note that virtio_mb() is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops for weak_barriers, while virtio_mb() uses smp_mb().
As previously stated, smp_mb() does not cover the same memory domains as dma_mb() would.
Michael S. Tsirkin
maintainerQuoted 5 lines · Peter Zijlstra
Quoted 2 lines · Michael S. Tsirkin
Seems to give a speedup on my box but I'm less sure about this one. E.g. as xchng faster than mfence on all/most intel CPUs? Anyone has an opinion?
Would help if you Cc people who would actually know this :-)
Good point. Glad you still saw this. Thanks!
Quoted 14 lines
Yes, we've recently established that xchg is indeed faster than mfence on at least recent machines, see:
lkml.kernel.org/r/CA+55aFynbkeuUGs9s-q+fLY6MeRBA6MjEyWWbbe7A5AaqsAknw@mail.gmail.com
Quoted 9 lines
include/linux/virtio_ring.h +9
-0+static inline void virtio_store_mb (bool weak_barriers, +__virtio16 *p,__virtio16 v) +{ +#ifdef CONFIG_SMP +if (weak_barriers) +smp_store_mb (*p, v); + else +#endif + {
Quoted 8 lines
include/linux/virtio_ring.h static inline void virtio_wmb(bool weak_barriers) · line 62
Quoted 4 lines
include/linux/virtio_ring.h +4
-0+WRITE_ONCE (*p, v); +mb (); + } +}Note that
virtio_mb()is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops forweak_barriers, whilevirtio_mb()usessmp_mb().
It's a hack really. I think I'll clean it up a bit to make it more consistent.
To simplify things, you may consider things before the optimization brought in by
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmb
Quoted 2 lines
As previously stated,
smp_mb()does not cover the same memory domains asdma_mb()would.
I know. We used to consistently do the right thing on SMP, but on UP Linux does not have good portable APIs for us to use. So we hack around with what's available which is typically stronger than what's really needed.
I guess no one cares about UP that much.
The Alexander came and tried to optimize UP using dma_wmb/dma_rmb. I guess he did not find dma_mb so left it as is.
Maybe we should make virtio depend on SMP, and be done with it, but the amount of code to maintain !SMP is small enough to not be worth the potential pain to users (if any).
Signature · 1 line
MST
Quoted 7 lines · Michael S. Tsirkin
Quoted 3 lines
Note that
virtio_mb()is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops forweak_barriers, whilevirtio_mb()usessmp_mb().It's a hack really. I think I'll clean it up a bit to make it more consistent.
Quoted 7 lines
To simplify things, you may consider things before the optimization brought in by
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmb
That commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
the *mb() primitives cover both.
Quoted 7 lines · Michael S. Tsirkin
Quoted 3 lines
Note that
virtio_mb()is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops forweak_barriers, whilevirtio_mb()usessmp_mb().It's a hack really. I think I'll clean it up a bit to make it more consistent.
Quoted 7 lines
To simplify things, you may consider things before the optimization brought in by
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmb
That commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
the *mb() primitives cover both.
Michael S. Tsirkin
maintainerQuoted 14 lines · Peter Zijlstra
Quoted 13 lines · Michael S. Tsirkin
Quoted 3 lines
Note that
virtio_mb()is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops forweak_barriers, whilevirtio_mb()usessmp_mb().It's a hack really. I think I'll clean it up a bit to make it more consistent.
To simplify things, you may consider things before the optimization brought in by
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930
Quoted 8 lines
Quoted 1 line
virtio_ring: Update weak barriers to use dma_wmb/rmbThat commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.
Michael S. Tsirkin
maintainerQuoted 14 lines · Peter Zijlstra
Quoted 13 lines · Michael S. Tsirkin
Quoted 3 lines
Note that
virtio_mb()is weirdly inconsistent with virtio_[rw]mb() in that they use dma_* ops forweak_barriers, whilevirtio_mb()usessmp_mb().It's a hack really. I think I'll clean it up a bit to make it more consistent.
To simplify things, you may consider things before the optimization brought in by
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930
Quoted 8 lines
Quoted 1 line
virtio_ring: Update weak barriers to use dma_wmb/rmbThat commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.
Quoted 8 lines · Michael S. Tsirkin
Quoted 6 lines · Peter Zijlstra
Quoted 5 lines
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmb
Quoted 10 lines
Quoted 6 lines
That commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.
I do not think so, but lets add Will, he dreams this stuff.
Quoted 8 lines · Michael S. Tsirkin
Quoted 6 lines · Peter Zijlstra
Quoted 5 lines
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmb
Quoted 10 lines
Quoted 6 lines
That commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.
I do not think so, but lets add Will, he dreams this stuff.
Quoted 16 lines · Peter Zijlstra
Quoted 15 lines · Michael S. Tsirkin
Quoted 12 lines · Peter Zijlstra
Quoted 5 lines
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmbThat commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Quoted 5 lines
Quoted 3 lines
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.I do not think so, but lets add Will, he dreams this stuff.
Right, and I don't sleep well these days.
Anyway, the outer-shareable domain (osh) is a superset of the inner-shareable domain (ish). The inner-shareable domain contains the CPUs and any peripherals that you and I would call "cache coherent". The outer-shareable domain extends this to cover a strange set of "less cache coherent" devices, which we would just call "not cache coherent" for the purposes of Linux. Normal, non-cacheable memory (i.e. the memory type we use for non-coherent DMA buffers) is outer-shareable.
Since the barrier macros don't know if the device is coherent or not, we use the stronger semantics of outer-shareable.
I've not been following the thread, but I reckon we could add dma_mb() (as dmb(osh) on arm), then use that to build dma_load_acquire and dma_store_release accessors. On arm64, we could probably use the acquire/release instructions directly, since they inherit the shareability domain of the address (which has the nice property of being inner-shareable for coherent devices).
The massive pain with adding new accessors is defining the semantics. memory-barriers.txt is already lacking for the CPU side, and we're struggling to express the kind of transitivity guarantees we provide today, let alone with new primitives :(
Will
Quoted 16 lines · Peter Zijlstra
Quoted 15 lines · Michael S. Tsirkin
Quoted 12 lines · Peter Zijlstra
Quoted 5 lines
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmbThat commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Quoted 5 lines
Quoted 3 lines
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.I do not think so, but lets add Will, he dreams this stuff.
Right, and I don't sleep well these days.
Anyway, the outer-shareable domain (osh) is a superset of the inner-shareable domain (ish). The inner-shareable domain contains the CPUs and any peripherals that you and I would call "cache coherent". The outer-shareable domain extends this to cover a strange set of "less cache coherent" devices, which we would just call "not cache coherent" for the purposes of Linux. Normal, non-cacheable memory (i.e. the memory type we use for non-coherent DMA buffers) is outer-shareable.
Since the barrier macros don't know if the device is coherent or not, we use the stronger semantics of outer-shareable.
I've not been following the thread, but I reckon we could add dma_mb() (as dmb(osh) on arm), then use that to build dma_load_acquire and dma_store_release accessors. On arm64, we could probably use the acquire/release instructions directly, since they inherit the shareability domain of the address (which has the nice property of being inner-shareable for coherent devices).
The massive pain with adding new accessors is defining the semantics. memory-barriers.txt is already lacking for the CPU side, and we're struggling to express the kind of transitivity guarantees we provide today, let alone with new primitives :(
Will
Michael S. Tsirkin
maintainerQuoted 43 lines · Will Deacon
Quoted 16 lines · Peter Zijlstra
Quoted 15 lines · Michael S. Tsirkin
Quoted 12 lines · Peter Zijlstra
Quoted 5 lines
commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Author: Alexander Duyck <[email protected]> Date: Mon Apr 13 21:03:49 2015 +0930 virtio_ring: Update weak barriers to use dma_wmb/rmbThat commit doesn't make any sense. dma_*mb() explicitly does _NOT_ cover the smp_*mb() part.
Again, look at the ARM definitions, the smp_*mb() primitives use the inner coherence stuff, while the dma_*mb() primitives use the outer coherent stuff.
Quoted 5 lines
Quoted 3 lines
Does outer coherent imply inner coherent?
Quoted 1 line
the
*mb()primitives cover both.I do not think so, but lets add Will, he dreams this stuff.
Right, and I don't sleep well these days.
Anyway, the outer-shareable domain (osh) is a superset of the inner-shareable domain (ish). The inner-shareable domain contains the CPUs and any peripherals that you and I would call "cache coherent". The outer-shareable domain extends this to cover a strange set of "less cache coherent" devices, which we would just call "not cache coherent" for the purposes of Linux. Normal, non-cacheable memory (i.e. the memory type we use for non-coherent DMA buffers) is outer-shareable.
Since the barrier macros don't know if the device is coherent or not, we use the stronger semantics of outer-shareable.
I've not been following the thread, but I reckon we could add
dma_mb()(as dmb(osh) on arm), then use that to builddma_load_acquireanddma_store_releaseaccessors. On arm64, we could probably use the acquire/release instructions directly, since they inherit the shareability domain of the address (which has the nice property of being inner-shareable for coherent devices).
Quoted 6 lines
The massive pain with adding new accessors is defining the semantics. memory-barriers.txt is already lacking for the CPU side, and we're struggling to express the kind of transitivity guarantees we provide today, let alone with new primitives :(
Will
Well virtio (might) have wanted dma_mb in the past.
But if are adding barrier stuff anyway, we really want pv_ counterparts to smp_ that do the same on CONFIG_SMP but don't change when CONFIG_SMP is disabled.
Signature · 1 line
MST