devicetree: bindings: Add vendor prefix for Kosagi

From: Sean Cross <[email protected]>

Add a vendor prefix for Sutajio Ko-Usagi PTE Ltd., which goes by the more common name of Kosagi.

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

V2: Rebase on top of linux-next

index 38eeaa2..265ec68 100644
@@ -125,6 +125,7 @@ karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 kinetic Kinetic Technologies
 kyo	Kyocera Corporation
+kosagi	Sutajio Ko-Usagi PTE Ltd.
 lacie	LaCie
 lantiq	Lantiq Semiconductor
 lenovo	Lenovo Group Ltd.

2.1.4

From: Sean Cross <[email protected]>

Novena is an open-hardware laptop/desktop/bare board.

See http://www.kosagi.com/w/index.php?title=Novena_Main_Page

---
 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/imx6q-novena.dts | 785 +++++++++++++++++++++++++++++++++++++
 2 files changed, 786 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-novena.dts

V2: Fix the PCIe regulator, make it always on
Fix the polarity of SD2 WP and CD lines, make them active low. Drop the simple-bus for regulators, put them in /soc instead. Configure the mux of all pins instead of depending on bootloader. Change license to Dual X11/GPLv2+ (Acked by Sean)
Sort the nodes alphabetically.

V3: Drop the spidev node
Drop the fsl,mode = "i2s-slave";
Move regulators into /

V4: Move iomux node to the end of the file
Drop the first level of functions from iomux
Tweak the names of the regulator nodes to reg_nnn: regulator-nnn {}, Remove various newlines
Formatting fixes

V5: Nuke the memory {} node

index 1ccf84a..d5d7670 100644
@@ -329,6 +329,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-hummingboard.dtb \
 	imx6q-nitrogen6x.dtb \
 	imx6q-nitrogen6_max.dtb \
+	imx6q-novena.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \

2.1.4

Applied both, thanks.