Skip to contentSkip to conversation

configs: update PowerPC Kconfig symbols

PATCH Superseded Romain Naour 2 participants 3 messages Dec 26, 2015

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Romain Naour

author
#0 lore raw

PATCH 1/1 configs: update PowerPC Kconfig symbols

The Kconfig symbole BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 has been renamed to BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC in commit [1].

The CS PowerPC 2011.03 toolchain is still used if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC is selected, except if the selected PPC CPU has SPE support. In this cas the CS PowerPC 2012.03 will be used.

[1] https://git.busybox.net/buildroot/commit/?id=fa4214e21b50b791ec365c64897ac2676b45448a
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/148311.html

Signed-off-by Romain Naour <[email protected]>
Cc "Yann E. MORIN" <[email protected]>
---
 web/toolchains/configs/sourcery-powerpc-e500v2.config | 1 -
 web/toolchains/configs/sourcery-powerpc.config        | 2 --
 2 files changed, 3 deletions(-)
web/toolchains/configs/sourcery-powerpc-e500v2.config +0 -1
index f4e3b57..95b88a0 100644
@@ -1,4 +1,3 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
 BR2_TARGET_OPTIMIZATION="-te500v2"
web/toolchains/configs/sourcery-powerpc.config +0 -2
index 532fab5..385ca88 100644
@@ -1,4 +1,2 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
-
Signature · 1 line
2.4.3
#1 lore raw

PATCH 1/1 configs: update PowerPC Kconfig symbols

Romain, All,

On 2015-12-26 13:16 +0100, Romain Naour spake thusly:

Quoted 24 lines

The Kconfig symbole BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 has been renamed to BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC in commit [1].

The CS PowerPC 2011.03 toolchain is still used if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC is selected, except if the selected PPC CPU has SPE support. In this cas the CS PowerPC 2012.03 will be used.

[1] https://git.busybox.net/buildroot/commit/?id=fa4214e21b50b791ec365c64897ac2676b45448a
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/148311.html

Signed-off-by Romain Naour <[email protected]>
Cc "Yann E. MORIN" <[email protected]>
---
 web/toolchains/configs/sourcery-powerpc-e500v2.config | 1 -
 web/toolchains/configs/sourcery-powerpc.config        | 2 --
 2 files changed, 3 deletions(-)
web/toolchains/configs/sourcery-powerpc-e500v2.config +0 -0
index f4e3b57..95b88a0 100644

web/toolchains/configs/sourcery-powerpc-e500v2.config line 3

Quoted 4 lines
web/toolchains/configs/sourcery-powerpc-e500v2.config +0 -1
@@ -1,4 +1,3 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
 BR2_TARGET_OPTIMIZATION="-te500v2"

Not directly your fault, but this config is still broken: it needs BR2_powerpc_8248=y too.

Regards,
Yann E. MORIN.

Quoted 12 lines
web/toolchains/configs/sourcery-powerpc.config +0 -2
index 532fab5..385ca88 100644
@@ -1,4 +1,2 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
-
Signature · 1 line
2.4.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
author
#2 lore raw

PATCH 1/1 configs: update PowerPC Kconfig symbols

Hi Yann,

Le 26/12/2015 15:52, Yann E. MORIN a ?crit :

Quoted 22 lines

Romain, All,

On 2015-12-26 13:16 +0100, Romain Naour spake thusly:

Quoted 19 lines

The Kconfig symbole BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 has been renamed to BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC in commit [1].

The CS PowerPC 2011.03 toolchain is still used if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC is selected, except if the selected PPC CPU has SPE support. In this cas the CS PowerPC 2012.03 will be used.

[1] https://git.busybox.net/buildroot/commit/?id=fa4214e21b50b791ec365c64897ac2676b45448a
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/148311.html

Signed-off-by Romain Naour <[email protected]>
Cc "Yann E. MORIN" <[email protected]>
---
 web/toolchains/configs/sourcery-powerpc-e500v2.config | 1 -
 web/toolchains/configs/sourcery-powerpc.config        | 2 --
 2 files changed, 3 deletions(-)
Quoted 12 lines

web/toolchains/configs/sourcery-powerpc-e500v2.config line 3

Quoted 9 lines
web/toolchains/configs/sourcery-powerpc-e500v2.config +0 -1
index f4e3b57..95b88a0 100644
@@ -1,4 +1,3 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
 BR2_TARGET_OPTIMIZATION="-te500v2"

Not directly your fault, but this config is still broken: it needs BR2_powerpc_8248=y too.

I think with CS PowerPC 2012.03 we can also remove BR2_TARGET_OPTIMIZATION="-te500v2" since there is only one sysroot.

Thanks for the review.

Best regards,
Romain

Quoted 17 lines

Regards,
Yann E. MORIN.

Quoted 12 lines
web/toolchains/configs/sourcery-powerpc.config +0 -2
index 532fab5..385ca88 100644
@@ -1,4 +1,2 @@
 BR2_powerpc=y
 BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103=y
-
Signature · 1 line
2.4.3