Skip to contentSkip to conversation

ARM: dts: sun4i: Add touchscreen node to inet9f-rev03 tablet dts file

PATCH New Hans de Goede 2 participants 6 messages Dec 22, 2015 – Dec 27, 2015

Subsystems (2)
Device tree bindings Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

Hans de Goede

author
#0 lore raw

PATCH v2 1/3 ARM: dts: sun4i: Add touchscreen node to inet9f-rev03 tablet dts file

Add a node describing the focaltech ft5406ee8 touchscreen found on inet-9f-rev03 / qware qw tb-g100 tablets.

Signed-off-by Hans de Goede <[email protected]>

---
Changes in v2:
-Drop unused pinctrl-names = "default";

---
 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +9 -0
index ca49b0d..bba4f9c 100644
@@ -253,6 +253,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	ft5406ee8: touchscreen at 38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
 };
 
 &lradc {
Signature · 1 line
2.5.0
author
#1 lore raw

PATCH v2 2/3 ARM: dts: sun4i: Add touchscreen node to chuwi-v7 dts file

Add a node describing the focaltech ft5306de4 touchscreen found on chuwi-v7-cw0825 tablets.

Signed-off-by Hans de Goede <[email protected]>

---
Changes in v2:
-Drop unused pinctrl-names = "default";

---
 arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +10 -0
index 5366089..023b03e 100644
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Chuwi V7 CW0825";

@@ -88,6 +89,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	ft5306de4: touchscreen at 38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
 };
 
 &lradc {
Signature · 1 line
2.5.0
Applied
#2 lore raw

PATCH v2 2/3 ARM: dts: sun4i: Add touchscreen node to chuwi-v7 dts file

Quoted 4 lines · Hans de Goede

Add a node describing the focaltech ft5306de4 touchscreen found on chuwi-v7-cw0825 tablets.

Signed-off-by Hans de Goede <[email protected]>

Queued for 4.6, thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151227/7e5dc981/attachment.sig>
author
#3 lore raw

PATCH v2 3/3 ARM: dts: sun4i: Add touchscreen node to inet97fv2 dts file

In reply to Hans de Goede

Add a node describing the focaltech ft5306de4 touchscreen found on inet97fv2 tablets.

Signed-off-by Hans de Goede <[email protected]>

---
Changes in v2:
-Drop unused pinctrl-names = "default";

---
 arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +10 -0
index 77c31da..04b0d2d 100644
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "INet-97F Rev 02";

@@ -93,6 +94,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	ft5406ee8: touchscreen at 38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
 };
 
 &lradc {
Signature · 1 line
2.5.0
Applied
#4 lore raw

PATCH v2 3/3 ARM: dts: sun4i: Add touchscreen node to inet97fv2 dts file

Quoted 4 lines · Hans de Goede

Add a node describing the focaltech ft5306de4 touchscreen found on inet97fv2 tablets.

Signed-off-by Hans de Goede <[email protected]>

Queued for 4.6, thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151227/6e0f5a7e/attachment.sig>
Applied
#5 lore raw

PATCH v2 1/3 ARM: dts: sun4i: Add touchscreen node to inet9f-rev03 tablet dts file

In reply to Hans de Goede
Quoted 4 lines · Hans de Goede

Add a node describing the focaltech ft5406ee8 touchscreen found on inet-9f-rev03 / qware qw tb-g100 tablets.

Signed-off-by Hans de Goede <[email protected]>

Queued for 4.6, thanks!

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151227/0ca66068/attachment-0001.sig>