drm/radeon: Update radeon_get_vblank_counter_kms()
Subsystems (2)
PATCH 1/1 drm/radeon: Update radeon_get_vblank_counter_kms()
From: Thierry Reding <[email protected]>
Commit 88e72717c2de ("drm/irq: Use unsigned int pipe in public API") updated the prototype of this function but not the implementation. This wasn't noticed even through compile tests because the prototype is part of the source file that uses it and hence the compiler won't know the prototype when it compiles the implementation.
The right thing would've been to move the prototype to a header that's included in radeon_kms.c so that the implementation signature could be checked against it, but the closest thing would've been radeon_drv.h and including that results in a lot of build errors, so we'll leave it as is for now.
---
Note that this doesn't really need to go into stable because the generated code should be the same.
drivers/gpu/drm/radeon/radeon_kms.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/gpu/drm/radeon/radeon_kms.c +12 -12
@@ -748,19 +748,19 @@ void radeon_driver_preclose_kms(struct drm_device *dev,* radeon_get_vblank_counter_kms - get frame count * * @dev: drm dev pointer -* @crtc: crtc to get the frame count from +* @pipe: crtc to get the frame count from * * Gets the frame count on the requested crtc (all asics). * Returns frame count on success, -EINVAL on failure. */ -u32 radeon_get_vblank_counter_kms (struct drm_device *dev,int crtc) +u32 radeon_get_vblank_counter_kms (struct drm_device *dev,unsigned int pipe) {int vpos, hpos, stat;u32 count;struct radeon_device *rdev = dev->dev_private; -if (crtc <0 || crtc >= rdev->num_crtc) { -DRM_ERROR ("Invalid crtc %d\n" , crtc); +if (pipe <0 || pipe >= rdev->num_crtc) { +DRM_ERROR ("Invalid crtc %u\n" , pipe);return -EINVAL ; }
@@ -772,29 +772,29 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)* and start of vsync, so vpos >= 0 means to bump the hw frame counter * result by 1 to give the proper appearance to caller. */ -if (rdev->mode_info.crtcs[crtc]) { +if (rdev->mode_info.crtcs[pipe]) {/* Repeat readout if needed to provide stable result if * we cross start of vsync during the queries. */ do { - count =radeon_get_vblank_counter (rdev, crtc); + count =radeon_get_vblank_counter (rdev, pipe);/* Ask radeon_get_crtc_scanoutpos to return vpos as * distance to start of vblank, instead of regular * vertical scanout pos. */ stat =radeon_get_crtc_scanoutpos ( - dev, crtc,GET_DISTANCE_TO_VBLANKSTART , + dev, pipe,GET_DISTANCE_TO_VBLANKSTART , &vpos, &hpos,NULL ,NULL , - &rdev->mode_info.crtcs[crtc]->base.hwmode); - }while (count !=radeon_get_vblank_counter (rdev, crtc)); + &rdev->mode_info.crtcs[pipe]->base.hwmode); + }while (count !=radeon_get_vblank_counter (rdev, pipe));if (((stat & (DRM_SCANOUTPOS_VALID |DRM_SCANOUTPOS_ACCURATE )) != (DRM_SCANOUTPOS_VALID |DRM_SCANOUTPOS_ACCURATE ))) {DRM_DEBUG_VBL ("Query failed! stat %d\n" , stat); }else { -DRM_DEBUG_VBL ("crtc %d: dist from vblank start %d\n" , - crtc, vpos); +DRM_DEBUG_VBL ("crtc %u: dist from vblank start %d\n" , + pipe, vpos);/* Bump counter if we are at >= leading edge of vblank, * but before vsync where vpos would turn negative and
@@ -806,7 +806,7 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) }else {/* Fallback to use value as is. */ - count =radeon_get_vblank_counter (rdev, crtc); + count =radeon_get_vblank_counter (rdev, pipe);DRM_DEBUG_VBL ("NULL mode info! Returned count may be wrong.\n" ); }
Signature · 6 lines
2.5.0 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Christian König
maintainerQuoted 8 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Commit
88e72717c2de("drm/irq: Use unsigned int pipe in public API") updated the prototype of this function but not the implementation. This wasn't noticed even through compile tests because the prototype is part of the source file that uses it and hence the compiler won't know the prototype when it compiles the implementation.
Quoted 5 lines
The right thing would've been to move the prototype to a header that's included in
radeon_kms.cso that the implementation signature could be checked against it, but the closest thing would've beenradeon_drv.hand including that results in a lot of build errors, so we'll leave it as is for now.
Yeah, that's because of the old UMS mess. We could probably clean that up now.
Quoted 4 lines
Cc Christian König <[email protected]>Cc Alex Deucher <[email protected]>Signed-off-by Thierry Reding <[email protected]>
Anyway patch is Reviewed-by: Christian König <[email protected]>
Regards,
Christian.
Quoted 73 lines
---
Note that this doesn't really need to go into stable because the generated code should be the same.drivers/gpu/drm/radeon/radeon_kms.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)drivers/gpu/drm/radeon/radeon_kms.c +11
-11@@ -748,19 +748,19 @@ void radeon_driver_preclose_kms(struct drm_device *dev,* radeon_get_vblank_counter_kms - get frame count * * @dev: drm dev pointer -* @crtc: crtc to get the frame count from +* @pipe: crtc to get the frame count from * * Gets the frame count on the requested crtc (all asics). * Returns frame count on success, -EINVAL on failure. */ -u32 radeon_get_vblank_counter_kms (struct drm_device *dev,int crtc) +u32 radeon_get_vblank_counter_kms (struct drm_device *dev,unsigned int pipe) {int vpos, hpos, stat;u32 count;struct radeon_device *rdev = dev->dev_private; -if (crtc <0 || crtc >= rdev->num_crtc) { -DRM_ERROR ("Invalid crtc %d\n" , crtc); +if (pipe <0 || pipe >= rdev->num_crtc) { +DRM_ERROR ("Invalid crtc %u\n" , pipe);return -EINVAL ; }@@ -772,29 +772,29 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)* and start of vsync, so vpos >= 0 means to bump the hw frame counter * result by 1 to give the proper appearance to caller. */ -if (rdev->mode_info.crtcs[crtc]) { +if (rdev->mode_info.crtcs[pipe]) {/* Repeat readout if needed to provide stable result if * we cross start of vsync during the queries. */ do { - count =radeon_get_vblank_counter (rdev, crtc); + count =radeon_get_vblank_counter (rdev, pipe);/* Ask radeon_get_crtc_scanoutpos to return vpos as * distance to start of vblank, instead of regular * vertical scanout pos. */ stat =radeon_get_crtc_scanoutpos ( - dev, crtc,GET_DISTANCE_TO_VBLANKSTART , + dev, pipe,GET_DISTANCE_TO_VBLANKSTART , &vpos, &hpos,NULL ,NULL , - &rdev->mode_info.crtcs[crtc]->base.hwmode); - }while (count !=radeon_get_vblank_counter (rdev, crtc)); + &rdev->mode_info.crtcs[pipe]->base.hwmode); + }while (count !=radeon_get_vblank_counter (rdev, pipe));if (((stat & (DRM_SCANOUTPOS_VALID |DRM_SCANOUTPOS_ACCURATE )) != (DRM_SCANOUTPOS_VALID |DRM_SCANOUTPOS_ACCURATE ))) {DRM_DEBUG_VBL ("Query failed! stat %d\n" , stat); }else { -DRM_DEBUG_VBL ("crtc %d: dist from vblank start %d\n" , - crtc, vpos); +DRM_DEBUG_VBL ("crtc %u: dist from vblank start %d\n" , + pipe, vpos);/* Bump counter if we are at >= leading edge of vblank, * but before vsync where vpos would turn negative and
drivers/gpu/drm/radeon/radeon_kms.c u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) · line 812
Quoted 8 lines
drivers/gpu/drm/radeon/radeon_kms.c +1
-1@@ -806,7 +806,7 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) }else {/* Fallback to use value as is. */ - count =radeon_get_vblank_counter (rdev, crtc); + count =radeon_get_vblank_counter (rdev, pipe);DRM_DEBUG_VBL ("NULL mode info! Returned count may be wrong.\n" ); }
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
drivers/gpu/drm/radeon/radeon_kms.c void radeon_driver_preclose_kms(struct drm_device *dev, · line 763
Quoted 5 lines · Thierry Reding
drivers/gpu/drm/radeon/radeon_kms.c +2
-2-if (crtc <0 || crtc >= rdev->num_crtc) { -DRM_ERROR ("Invalid crtc %d\n" , crtc); +if (pipe <0 || pipe >= rdev->num_crtc) { +DRM_ERROR ("Invalid crtc %u\n" , pipe);
Does it still make sense to test for < 0? Doesn't that generate a compiler warning?
Also, I don't really get the point of the crtc => pipe rename here...
Signature · 6 lines
Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 9 lines · Michel Dänzer
drivers/gpu/drm/radeon/radeon_kms.c void radeon_driver_preclose_kms(struct drm_device *dev, · line 763
Quoted 5 lines · Thierry Reding
drivers/gpu/drm/radeon/radeon_kms.c +2
-2-if (crtc <0 || crtc >= rdev->num_crtc) { -DRM_ERROR ("Invalid crtc %d\n" , crtc); +if (pipe <0 || pipe >= rdev->num_crtc) { +DRM_ERROR ("Invalid crtc %u\n" , pipe);Does it still make sense to test for < 0? Doesn't that generate a compiler warning?
I didn't see a compiler warning in my build tests, but you're right, it's not necessary to check for that because it can't be true. I'll respin with that fixed up.
Quoted 1 line
Also, I don't really get the point of the crtc => pipe rename here...
This is primarily for consistency. That way we can reserve "pipe" for the unsigned integers that denote the DRM index of the CRTC, and keep "crtc" for cases where we deal with struct drm_crtc objects.
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel