Consolidated pull

index fe31f20..e40ae77 100644
@@ -14,7 +14,9 @@ DEPENDS = "xcb-proto xproto libxau xcb-proto-native libpthread-stubs"
 
 SRC_URI = "http://xcb.freedesktop.org/dist/libxcb-${PV}.tar.bz2 \
            file://xcbincludedir.patch \
-           file://disable-check.patch"
+           file://disable-check.patch \
+           file://gcc-mips-pr68302-mips-workaround.patch \
+          "
 
 PACKAGES_DYNAMIC = "^libxcb-.*"
 

new file mode 100644
index 0000000..698d038
@@ -0,0 +1,22 @@
+Reduce debug info for xcb.c since on mips we run into a gcc5 bug
+
+https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68302
+
+This patch is a workaround to get past the gcc bug until its resolved.
+it should have minimal impact on libxcb while make it work.
+
+Upstream-Status: Inappropriate [OE-Specific]
+Signed-off-by: Khem Raj <[email protected]>
+
+Index: libxcb-1.11.1/src/Makefile.am
+===================================================================
+--- libxcb-1.11.1.orig/src/Makefile.am
++++ libxcb-1.11.1/src/Makefile.am
+@@ -188,6 +188,7 @@ EXTSOURCES += xkb.c
+ if BUILD_XKB
+ lib_LTLIBRARIES += libxcb-xkb.la
+ libxcb_xkb_la_LDFLAGS = -version-info 1:0:0 -no-undefined
++CFLAGS += -g1
+ libxcb_xkb_la_LIBADD = $(XCB_LIBS)
+ nodist_libxcb_xkb_la_SOURCES = xkb.c xkb.h
+ endif

index 2661fd3..e91b6f3 100644
@@ -8,6 +8,10 @@ def icu_download_version(d):
 
 ICU_PV = "${@icu_download_version(d)}"
 
+# http://errors.yoctoproject.org/Errors/Details/20486/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"
+
 BASE_SRC_URI = "http://download.icu-project.org/files/icu4c/${PV}/icu4c-${ICU_PV}-src.tgz"
 SRC_URI = "${BASE_SRC_URI} \
            file://icu-pkgdata-large-cmd.patch \

index b84baae..a9dc612 100644
@@ -1,10 +1,9 @@
 require recipes-devtools/gcc/gcc-${PV}.inc
 require gcc-target.inc
 
-# Building with thumb enabled on armv4t fails with
-# | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7438:(.text.unlikely+0x2fa): relocation truncated to fit: R_ARM_THM_CALL against symbol `fancy_abort(char const*, int, char const*)' defined in .glue_7 section in linker stubs
-# | gcc-4.8.1-r0/gcc-4.8.1/gcc/cp/decl.c:7442:(.text.unlikely+0x318): additional relocation overflows omitted from the output
+# http://errors.yoctoproject.org/Errors/Details/20497/
 ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"
 
 BBCLASSEXTEND = "nativesdk"
 

index f455740..98b465b 100644
@@ -119,3 +119,7 @@ guile_sstate_postinst() {
                 find ${STAGING_DIR_TARGET}/${libdir}/guile/2.0/ccache -type f | xargs touch
 	fi
 }
+
+# http://errors.yoctoproject.org/Errors/Details/20491/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"

index a1f115c..60a7d2e 100644
@@ -53,3 +53,7 @@ do_install_append_class-native() {
 FILES_${PN} += "${datadir}/OpenSP/"
 
 BBCLASSEXTEND = "native"
+
+# http://errors.yoctoproject.org/Errors/Details/20489/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"

index ffa9049..c87c582 100644
@@ -41,3 +41,8 @@ EXTRA_OEMAKE = "SENDMAIL=${sbindir}/sendmail IPv6=-DHAVE_IPv6_FUNCS PREFIX=/usr
 # fio.c:56:17: fatal error: ssl.h: No such file or directory
 # #include <ssl.h>
 PARALLEL_MAKE = ""
+
+# Causes gcc to get stuck and eat all available memory in qemuarm builds
+# http://errors.yoctoproject.org/Errors/Details/20488/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"

index 97fc7ec..5d74a2e 100644
@@ -25,3 +25,6 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-os=linux \
 
 S = "${WORKDIR}/gst-libav-${PV}"
 
+# http://errors.yoctoproject.org/Errors/Details/20493/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"

index 8282c1b..29bdf94 100644
@@ -10,3 +10,7 @@ SRC_URI += "\
 
 SRC_URI[md5sum] = "fb4ea2f6fbbe45bf032cd36e586883ce"
 SRC_URI[sha256sum] = "9dfe0fcae2a866de9d3942c66995e4b460230446887dbdab302d41a8aee8d09a"
+
+# http://errors.yoctoproject.org/Errors/Details/20487/
+ARM_INSTRUCTION_SET_armv4 = "arm"
+ARM_INSTRUCTION_SET_armv5 = "arm"

new file mode 100644
index 0000000..d552502
@@ -0,0 +1,61 @@
+From 24484e80b3e329c9edee1995e102f8612eedb79c Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Tue, 13 May 2014 23:32:27 +0200
+Subject: [PATCH] Add AO_REQUIRE_CAS to fix build on ARM < v6
+
+ARM earlier than ARMv6, such as ARMv4 and ARMv5 do not provide
+optimize atomic operations in libatomic_ops. Since libunwind is using
+such operations, it should define AO_REQUIRE_CAS before including
+<atomic_ops.h> so that libatomic_ops knows it should use emulated
+atomic operations instead (even though they are obviously a lot more
+expensive).
+
+Also, while real atomic operations are all inline functions and
+therefore linking against libatomic_ops was not required, the emulated
+atomic operations actually require linking against libatomic_ops, so
+the commented AC_CHECK_LIB test in acinclude.m4 is uncommented to make
+sure we link against libatomic_ops.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+
+Upstream-Status: Pending
+Taken from:
+https://raw.githubusercontent.com/rdnetto/teapot-buildroot/master/package/libunwind/libunwind-02-Add-AO_REQUIRE_CAS-to-fix-build-on-ARM-v6.patch
+
+---
+ acinclude.m4          | 8 +-------
+ include/libunwind_i.h | 1 +
+ 2 files changed, 2 insertions(+), 7 deletions(-)
+
+diff --git a/acinclude.m4 b/acinclude.m4
+index 497f7c2..9c15af1 100644
+--- a/acinclude.m4
++++ b/acinclude.m4
+@@ -22,11 +22,5 @@ fi])
+ AC_DEFUN([CHECK_ATOMIC_OPS],
+ [dnl Check whether the system has the atomic_ops package installed.
+   AC_CHECK_HEADERS(atomic_ops.h)
+-#
+-# Don't link against libatomic_ops for now.  We don't want libunwind
+-# to depend on libatomic_ops.so.  Fortunately, none of the platforms
+-# we care about so far need libatomic_ops.a (everything is done via
+-# inline macros).
+-#
+-#  AC_CHECK_LIB(atomic_ops, main)
++  AC_CHECK_LIB(atomic_ops, main)
+ ])
+diff --git a/include/libunwind_i.h b/include/libunwind_i.h
+index 23f615e..deabdfd 100644
+--- a/include/libunwind_i.h
++++ b/include/libunwind_i.h
+@@ -95,6 +95,7 @@ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+ 	(pthread_mutex_unlock != NULL ? pthread_mutex_unlock (l) : 0)
+ 
+ #ifdef HAVE_ATOMIC_OPS_H
++# define AO_REQUIRE_CAS
+ # include <atomic_ops.h>
+ static inline int
+ cmpxchg_ptr (void *addr, void *old, void *new)
+-- 
+1.9.2
+

index 29bdf94..aa62bcc 100644
@@ -6,6 +6,7 @@ SRC_URI += "\
     file://Fix-test-case-link-failure-on-PowerPC-systems-with-Altivec.patch \
     file://Link-libunwind-to-libgcc_s-rather-than-libgcc.patch \
     file://0001-Invalid-dwarf-opcodes-can-cause-references-beyond-th.patch \
+    file://Add-AO_REQUIRE_CAS-to-fix-build-on-ARM-v6.patch \
 "
 
 SRC_URI[md5sum] = "fb4ea2f6fbbe45bf032cd36e586883ce"

index 47f3f40..4909b10 100644
@@ -25,13 +25,12 @@ PACKAGECONFIG[ogg]     = "--enable-ogg,--disable-ogg,libogg"
 PACKAGECONFIG[theora]  = "--enable-theora,--disable-theora,libtheora"
 PACKAGECONFIG[vorbis]  = "--enable-vorbis,--disable-vorbis,libvorbis"
 PACKAGECONFIG[pango]   = "--enable-pango,--disable-pango,pango"
+# libvisual do not seem to exist anywhere in OE
+PACKAGECONFIG[visual]  = "--enable-libvisual,--disable-libvisual,libvisual"
+PACKAGECONFIG[cdparanoia] = "--enable-cdparanoia,--disable-cdparanoia,cdparanoia"
 
-
-# cdparanoia and libvisual do not seem to exist anywhere in OE
 EXTRA_OECONF += " \
     --disable-freetypetest \
-    --disable-cdparanoia \
-    --disable-libvisual \
 "
 
 FILES_${MLPREFIX}libgsttag-1.0 += "${datadir}/gst-plugins-base/1.0/license-translations.dict"

index 6e316de..0ce4b8f 100644
@@ -31,10 +31,7 @@ PACKAGECONFIG[speex]      = "--enable-speex,--disable-speex,speex"
 PACKAGECONFIG[taglib]     = "--enable-taglib,--disable-taglib,taglib"
 PACKAGECONFIG[vpx]        = "--enable-vpx,--disable-vpx,libvpx"
 PACKAGECONFIG[wavpack]    = "--enable-wavpack,--disable-wavpack,wavpack"
-
-# the 1394 plugins require both libraw1394 and libiec61883
-# the former is included in meta-oe, the latter isn't
-# -> disabled
+PACKAGECONFIG[dv1394]     = "--enable-dv1394,--disable-dv1394,libraw1394 libiec61883 libavc1394"
 
 EXTRA_OECONF += " \
     --enable-oss \

@@ -51,7 +48,6 @@ EXTRA_OECONF += " \
     --disable-libdv \
     --disable-shout2 \
     --disable-examples \
-    --disable-dv1394 \
 "
 
 FILES_${PN}-equalizer += "${datadir}/gstreamer-1.0/presets/*.prs"

index cdedb60..d7aefec 100644
@@ -20,7 +20,7 @@ PACKAGECONFIG ??= " \
     ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', 'bluez', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'directfb', 'directfb', '', d)} \
-    orc curl uvch264 neon sndfile \
+    orc curl neon sndfile \
     hls sbc dash bz2 smoothstreaming \
     "
 

@@ -38,7 +38,7 @@ PACKAGECONFIG[opus]            = "--enable-opus,--disable-opus,libopus"
 PACKAGECONFIG[flite]           = "--enable-flite,--disable-flite,flite-alsa"
 PACKAGECONFIG[opencv]          = "--enable-opencv,--disable-opencv,opencv"
 PACKAGECONFIG[wayland]         = "--enable-wayland --enable-egl,--disable-wayland --disable-egl,wayland virtual/egl"
-PACKAGECONFIG[uvch264]         = "--enable-uvch264,--disable-uvch264,libusb1 udev"
+PACKAGECONFIG[uvch264]         = "--enable-uvch264,--disable-uvch264,libusb1 libgudev"
 PACKAGECONFIG[directfb]        = "--enable-directfb,--disable-directfb,directfb"
 PACKAGECONFIG[neon]            = "--enable-neon,--disable-neon,neon"
 PACKAGECONFIG[openal]          = "--enable-openal,--disable-openal,openal-soft"

index 0ce4b8f..edaafe8 100644
@@ -11,7 +11,7 @@ inherit gettext
 PACKAGECONFIG ??= " \
     ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'pulseaudio', 'pulseaudio', '', d)} \
-    orc cairo flac gdk-pixbuf gudev jpeg libpng soup speex taglib \
+    orc cairo flac gdk-pixbuf jpeg libpng soup speex taglib v4l2\
     "
 
 X11DEPENDS = "virtual/libx11 libsm libxrender libxfixes libxdamage"

@@ -22,7 +22,8 @@ PACKAGECONFIG[pulseaudio] = "--enable-pulse,--disable-pulse,pulseaudio"
 PACKAGECONFIG[cairo]      = "--enable-cairo,--disable-cairo,cairo"
 PACKAGECONFIG[flac]       = "--enable-flac,--disable-flac,flac"
 PACKAGECONFIG[gdk-pixbuf] = "--enable-gdk_pixbuf,--disable-gdk_pixbuf,gdk-pixbuf"
-PACKAGECONFIG[gudev]      = "--with-gudev,--without-gudev,udev"
+PACKAGECONFIG[gudev]      = "--with-gudev,--without-gudev,libgudev"
+PACKAGECONFIG[libv4l2]    = "--with-libv4l2,--without-libv4l2,libv4l2"
 PACKAGECONFIG[jack]       = "--enable-jack,--disable-jack,jack"
 PACKAGECONFIG[jpeg]       = "--enable-jpeg,--disable-jpeg,jpeg"
 PACKAGECONFIG[libpng]     = "--enable-libpng,--disable-libpng,libpng"

@@ -32,11 +33,10 @@ PACKAGECONFIG[taglib]     = "--enable-taglib,--disable-taglib,taglib"
 PACKAGECONFIG[vpx]        = "--enable-vpx,--disable-vpx,libvpx"
 PACKAGECONFIG[wavpack]    = "--enable-wavpack,--disable-wavpack,wavpack"
 PACKAGECONFIG[dv1394]     = "--enable-dv1394,--disable-dv1394,libraw1394 libiec61883 libavc1394"
+PACKAGECONFIG[v4l2]       = "--enable-gst_v4l2,--disable-gst_v4l2"
 
 EXTRA_OECONF += " \
     --enable-oss \
-    --enable-gst_v4l2 \
-    --without-libv4l2 \
     --disable-directsound \
     --disable-waveform \
     --disable-oss4 \

index d7aefec..b4f01af 100644
@@ -55,6 +55,9 @@ PACKAGECONFIG[sndfile]         = "--enable-sndfile,--disable-sndfile,libsndfile1
 PACKAGECONFIG[webp]            = "--enable-webp,--disable-webp,libwebp"
 PACKAGECONFIG[rtmp]            = "--enable-rtmp,--disable-rtmp,rtmpdump"
 PACKAGECONFIG[libssh2]         = "--enable-libssh2,--disable-libssh2,libssh2"
+PACKAGECONFIG[voamrwbenc]      = "--enable-voamrwbenc,--disable-voamrwbenc,vo-amrwbenc"
+PACKAGECONFIG[voaacenc]        = "--enable-voaacenc,--disable-voaacenc,vo-aacenc"
+PACKAGECONFIG[resindvd]        = "--enable-resindvd,--disable-resindvd,libdvdnav libdvdread"
 
 # these plugins have not been ported to 1.0 (yet):
 #   directdraw vcd apexsink dc1394 lv2 linsys musepack mythtv

@@ -66,8 +69,8 @@ PACKAGECONFIG[libssh2]         = "--enable-libssh2,--disable-libssh2,libssh2"
 # these plugins have no corresponding library in OE-core or meta-openembedded:
 #   openni2 winks direct3d directdraw directsound winscreencap osx_video
 #   apple_media android_media avc chromaprint daala dts gme gsm kate ladspa mimic
-#   mpeg2enc mplex ofa openjpeg opensles pvr resindvd rtmp soundtouch spandsp spc
-#   srtp vdpau voaacenc voamrwbenc wasapi zbar
+#   mpeg2enc mplex ofa openjpeg opensles pvr rtmp soundtouch spandsp spc
+#   srtp vdpau wasapi zbar
 
 EXTRA_OECONF += " \
     --enable-dvb \

@@ -106,7 +109,6 @@ EXTRA_OECONF += " \
     --disable-osx_video \
     --disable-pvr \
     --disable-quicktime \
-    --disable-resindvd \
     --disable-sdl \
     --disable-sdltest \
     --disable-sndio \

@@ -118,8 +120,6 @@ EXTRA_OECONF += " \
     --disable-timidity \
     --disable-vcd \
     --disable-vdpau \
-    --disable-voaacenc \
-    --disable-voamrwbenc \
     --disable-wasapi \
     --disable-wildmidi \
     --disable-wininet \

@@ -133,3 +133,4 @@ ARM_INSTRUCTION_SET = "arm"
 
 FILES_gstreamer1.0-plugins-bad-opencv += "${datadir}/gst-plugins-bad/1.0/opencv*"
 
+FILES_${PN}-voamrwbenc += "${datadir}/gstreamer-${LIBV}/presets/GstVoAmrwbEnc.prs"

index 97f64f3..f138f97 100644
@@ -39,7 +39,7 @@ PACKAGECONFIG ??= " \
     ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', 'alsa', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'directfb', 'directfb', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'pulseaudio', 'pulseaudio', '', d)} \
-    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland gles2', '', d)} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} \
 "
 PACKAGECONFIG[alsa]       = "--enable-alsa --disable-alsatest,--disable-alsa,alsa-lib,"

index 964fddc..b9fa6d8 100644
@@ -1471,6 +1471,16 @@ class OpkgPM(PackageManager):
                                         self.d.getVar('FEED_DEPLOYDIR_BASE_URI', True),
                                         arch))
 
+            if self.opkg_dir != '/var/lib/opkg':
+                # There is no command line option for this anymore, we need to add
+                # info_dir and status_file to config file, if OPKGLIBDIR doesn't have
+                # the default value of "/var/lib" as defined in opkg:
+                # libopkg/opkg_conf.h:#define OPKG_CONF_DEFAULT_INFO_DIR      "/var/lib/opkg/info"
+                # libopkg/opkg_conf.h:#define OPKG_CONF_DEFAULT_STATUS_FILE   "/var/lib/opkg/status"
+                cfg_file.write("option info_dir     %s\n" % os.path.join(self.d.getVar('OPKGLIBDIR', True), 'opkg', 'info'))
+                cfg_file.write("option status_file  %s\n" % os.path.join(self.d.getVar('OPKGLIBDIR', True), 'opkg', 'status'))
+
+
     def _create_config(self):
         with open(self.config_file, "w+") as config_file:
             priority = 1

@@ -1486,6 +1496,15 @@ class OpkgPM(PackageManager):
                     config_file.write("src oe-%s file:%s\n" %
                                       (arch, pkgs_dir))
 
+            if self.opkg_dir != '/var/lib/opkg':
+                # There is no command line option for this anymore, we need to add
+                # info_dir and status_file to config file, if OPKGLIBDIR doesn't have
+                # the default value of "/var/lib" as defined in opkg:
+                # libopkg/opkg_conf.h:#define OPKG_CONF_DEFAULT_INFO_DIR      "/var/lib/opkg/info"
+                # libopkg/opkg_conf.h:#define OPKG_CONF_DEFAULT_STATUS_FILE   "/var/lib/opkg/status"
+                config_file.write("option info_dir     %s\n" % os.path.join(self.d.getVar('OPKGLIBDIR', True), 'opkg', 'info'))
+                config_file.write("option status_file  %s\n" % os.path.join(self.d.getVar('OPKGLIBDIR', True), 'opkg', 'status'))
+
     def insert_feeds_uris(self):
         if self.feed_uris == "":
             return

index 8fb715a..a8702cf 100644
@@ -10,7 +10,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
 PROVIDES_append_class-native = " texinfo-replacement-native"
 
 def compress_pkg(d):
-    if "compress_doc" in (d.getVar("INHERIT", True) or "").split():
+    if bb.data.inherits_class('compress_doc', d):
          compress = d.getVar("DOC_COMPRESS", True)
          if compress == "gz":
              return "gzip"

index 446aaea..cbd4014 100644
@@ -22,6 +22,9 @@ S = "${WORKDIR}/DirectFB-${PV}"
 
 LDFLAGS_append =" -lts -lm"
 
+# Workaround for linking issues seen with armv7a + gold
+LDFLAGS_append_armv7a = "${@base_contains('DISTRO_FEATURES', 'ld-is-gold', ' -fuse-ld=bfd ', '', d)}"
+
 BINCONFIG = "${bindir}/directfb-config"
 
 inherit autotools binconfig-disabled pkgconfig

new file mode 100644
index 0000000..8ce255f
@@ -0,0 +1,323 @@
+Upstream-Status: Backport
+
+Signed-off-by: Li Xin <[email protected]>
+
+From https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=6c84109cfa26f35c3dfed3acb97d347361bd5849
+Author: Carlos O'Donell <[email protected]>
+Date:   Thu Oct 8 16:34:53 2015 -0400
+
+    strcoll: Remove incorrect STRDIFF-based optimization (Bug 18589).
+
+    The optimization introduced in commit
+    f13c2a8dff2329c6692a80176262ceaaf8a6f74e, causes regressions in
+    sorting for languages that have digraphs that change sort order, like
+    cs_CZ which sorts ch between h and i.
+
+    My analysis shows the fast-forwarding optimization in STRCOLL advances
+    through a digraph while possibly stopping in the middle which results
+    in a subsequent skipping of the digraph and incorrect sorting. The
+    optimization is incorrect as implemented and because of that I'm
+    removing it for 2.23, and I will also commit this fix for 2.22 where
+    it was originally introduced.
+
+    This patch reverts the optimization, introduces a new bug-strcoll2.c
+    regression test that tests both cs_CZ.UTF-8 and da_DK.ISO-8859-1 and
+    ensures they sort one digraph each correctly. The optimization can't be
+    applied without regressing this test.
+
+    Checked on x86_64, bug-strcoll2.c fails without this patch and passes
+    after. This will also get a fix on 2.22 which has the same bug.
+
+    (cherry picked from commit 87701a58e291bd7ac3b407d10a829dac52c9c16e)
+---
+ locale/C-collate.c           |  4 +-
+ locale/categories.def        |  1 -
+ locale/langinfo.h            |  1 -
+ locale/localeinfo.h          |  7 ----
+ locale/programs/ld-collate.c |  9 -----
+ string/bug-strcoll2.c        | 95 ++++++++++++++++++++++++++++++++++++++++++++
+ string/strcoll_l.c           | 39 +-----------------
+ wcsmbs/wcscoll_l.c           |  1 -
+ 8 files changed, 98 insertions(+), 59 deletions(-)
+ create mode 100644 string/bug-strcoll2.c
+
+diff --git a/locale/C-collate.c b/locale/C-collate.c
+index d7f3c55..06dfdfa 100644
+--- a/locale/C-collate.c
++++ b/locale/C-collate.c
+@@ -144,8 +144,6 @@ const struct __locale_data _nl_C_LC_COLLATE attribute_hidden =
+     /* _NL_COLLATE_COLLSEQWC */
+     { .string = (const char *) collseqwc },
+     /* _NL_COLLATE_CODESET */
+-    { .string = _nl_C_codeset },
+-    /* _NL_COLLATE_ENCODING_TYPE */
+-    { .word = __cet_8bit }
++    { .string = _nl_C_codeset }
+   }
+ };
+diff --git a/locale/categories.def b/locale/categories.def
+index 045489d..a8dda53 100644
+--- a/locale/categories.def
++++ b/locale/categories.def
+@@ -58,7 +58,6 @@ DEFINE_CATEGORY
+   DEFINE_ELEMENT (_NL_COLLATE_COLLSEQMB,        "collate-collseqmb",        std, wstring)
+   DEFINE_ELEMENT (_NL_COLLATE_COLLSEQWC,        "collate-collseqwc",        std, wstring)
+   DEFINE_ELEMENT (_NL_COLLATE_CODESET,		"collate-codeset",	    std, string)
+-  DEFINE_ELEMENT (_NL_COLLATE_ENCODING_TYPE,   "collate-encoding-type",    std, word)
+   ), NO_POSTLOAD)
+ 
+ 
+diff --git a/locale/langinfo.h b/locale/langinfo.h
+index ffc5c7f..a565d9d 100644
+--- a/locale/langinfo.h
++++ b/locale/langinfo.h
+@@ -255,7 +255,6 @@ enum
+   _NL_COLLATE_COLLSEQMB,
+   _NL_COLLATE_COLLSEQWC,
+   _NL_COLLATE_CODESET,
+-  _NL_COLLATE_ENCODING_TYPE,
+   _NL_NUM_LC_COLLATE,
+ 
+   /* LC_CTYPE category: character classification.
+diff --git a/locale/localeinfo.h b/locale/localeinfo.h
+index a7516c0..c076d8e 100644
+--- a/locale/localeinfo.h
++++ b/locale/localeinfo.h
+@@ -110,13 +110,6 @@ enum coll_sort_rule
+   sort_mask
+ };
+ 
+-/* Collation encoding type.  */
+-enum collation_encoding_type
+-{
+-  __cet_other,
+-  __cet_8bit,
+-  __cet_utf8
+-};
+ 
+ /* We can map the types of the entries into a few categories.  */
+ enum value_type
+diff --git a/locale/programs/ld-collate.c b/locale/programs/ld-collate.c
+index 16e9039..3c88c6d 100644
+--- a/locale/programs/ld-collate.c
++++ b/locale/programs/ld-collate.c
+@@ -32,7 +32,6 @@
+ #include "linereader.h"
+ #include "locfile.h"
+ #include "elem-hash.h"
+-#include "../localeinfo.h"
+ 
+ /* Uncomment the following line in the production version.  */
+ /* #define NDEBUG 1 */
+@@ -2130,8 +2129,6 @@ collate_output (struct localedef_t *locale, const struct charmap_t *charmap,
+ 	  /* The words have to be handled specially.  */
+ 	  if (idx == _NL_ITEM_INDEX (_NL_COLLATE_SYMB_HASH_SIZEMB))
+ 	    add_locale_uint32 (&file, 0);
+-	  else if (idx == _NL_ITEM_INDEX (_NL_COLLATE_ENCODING_TYPE))
+-	    add_locale_uint32 (&file, __cet_other);
+ 	  else
+ 	    add_locale_empty (&file);
+ 	}
+@@ -2495,12 +2492,6 @@ collate_output (struct localedef_t *locale, const struct charmap_t *charmap,
+   add_locale_raw_data (&file, collate->mbseqorder, 256);
+   add_locale_collseq_table (&file, &collate->wcseqorder);
+   add_locale_string (&file, charmap->code_set_name);
+-  if (strcmp (charmap->code_set_name, "UTF-8") == 0)
+-    add_locale_uint32 (&file, __cet_utf8);
+-  else if (charmap->mb_cur_max == 1)
+-    add_locale_uint32 (&file, __cet_8bit);
+-  else
+-    add_locale_uint32 (&file, __cet_other);
+   write_locale_data (output_path, LC_COLLATE, "LC_COLLATE", &file);
+ 
+   obstack_free (&weightpool, NULL);
+diff --git a/string/bug-strcoll2.c b/string/bug-strcoll2.c
+new file mode 100644
+index 0000000..950b090
+--- /dev/null
++++ b/string/bug-strcoll2.c
+@@ -0,0 +1,95 @@
++/* Bug 18589: sort-test.sh fails at random.
++ * Copyright (C) 1998-2015 Free Software Foundation, Inc.
++ * This file is part of the GNU C Library.
++ * Contributed by Ulrich Drepper <[email protected]>, 1998.
++ *
++ * The GNU C Library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * The GNU C Library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with the GNU C Library; if not, see
++ * <http://www.gnu.org/licenses/>.  */
++
++#include <stdio.h>
++#include <string.h>
++#include <locale.h>
++
++/* An incorrect strcoll optimization resulted in incorrect
++ *    results from strcoll for cs_CZ and da_DK.  */
++
++int
++test_cs_CZ (void)
++{
++  const char t1[] = "config";
++  const char t2[] = "choose";
++  if (setlocale (LC_ALL, "cs_CZ.UTF-8") == NULL)
++    {
++      perror ("setlocale");
++      return 1;
++    }
++  /* In Czech the digraph ch sorts after c, therefore we expect
++ *      config to sort before choose.  */
++  int a = strcoll (t1, t2);
++  int b = strcoll (t2, t1);
++  printf ("strcoll (\"%s\", \"%s\") = %d\n", t1, t2, a);
++  printf ("strcoll (\"%s\", \"%s\") = %d\n", t2, t1, b);
++  if (a < 0 && b > 0)
++    {
++      puts ("PASS: config < choose");
++      return 0;
++    }
++  else
++    {
++      puts ("FAIL: Wrong sorting in cz_CZ.UTF-8.");
++      return 1;
++    }
++}
++
++int
++test_da_DK (void)
++{
++  const char t1[] = "AS";
++  const char t2[] = "AA";
++  if (setlocale (LC_ALL, "da_DK.ISO-8859-1") == NULL)
++    {
++      perror ("setlocale");
++      return 1;
++    }
++  /* AA should be treated as the last letter of the Danish alphabet,
++ *      hence sorting after AS.  */
++  int a = strcoll (t1, t2);
++  int b = strcoll (t2, t1);
++  printf ("strcoll (\"%s\", \"%s\") = %d\n", t1, t2, a);
++  printf ("strcoll (\"%s\", \"%s\") = %d\n", t2, t1, b);
++  if (a < 0 && b > 0)
++    {
++      puts ("PASS: AS < AA");
++      return 0;
++    }
++  else
++    {
++      puts ("FAIL: Wrong sorting in da_DK.ISO-8859-1");
++      return 1;
++    }
++}
++
++static int
++do_test (void)
++{
++  int err = 0;
++  err |= test_cs_CZ ();
++  err |= test_da_DK ();
++  return err;
++}
++
++#define TEST_FUNCTION do_test ()
++#include "../test-skeleton.c"
++
++
+diff --git a/string/strcoll_l.c b/string/strcoll_l.c
+index b36b18c..a18b65e 100644
+--- a/string/strcoll_l.c
++++ b/string/strcoll_l.c
+@@ -30,7 +30,6 @@
+ # define STRING_TYPE char
+ # define USTRING_TYPE unsigned char
+ # define STRCOLL __strcoll_l
+-# define STRDIFF __strdiff
+ # define STRCMP strcmp
+ # define WEIGHT_H "../locale/weight.h"
+ # define SUFFIX	MB
+@@ -43,19 +42,6 @@
+ #include "../locale/localeinfo.h"
+ #include WEIGHT_H
+ 
+-#define MASK_UTF8_7BIT  (1 << 7)
+-#define MASK_UTF8_START (3 << 6)
+-
+-size_t
+-STRDIFF (const STRING_TYPE *s, const STRING_TYPE *t)
+-{
+-  size_t n;
+-
+-  for (n = 0; *s != '\0' && *s++ == *t++; ++n)
+-    continue;
+-
+-  return n;
+-}
+ 
+ /* Track status while looking for sequences in a string.  */
+ typedef struct
+@@ -274,29 +260,9 @@ STRCOLL (const STRING_TYPE *s1, const STRING_TYPE *s2, __locale_t l)
+   const USTRING_TYPE *extra;
+   const int32_t *indirect;
+ 
+-  /* In case there is no locale specific sort order (C / POSIX).  */
+   if (nrules == 0)
+     return STRCMP (s1, s2);
+ 
+-  /* Fast forward to the position of the first difference.  Needs to be
+-     encoding aware as the byte-by-byte comparison can stop in the middle
+-     of a char sequence for multibyte encodings like UTF-8.  */
+-  uint_fast32_t encoding =
+-    current->values[_NL_ITEM_INDEX (_NL_COLLATE_ENCODING_TYPE)].word;
+-  if (encoding != __cet_other)
+-    {
+-      size_t diff = STRDIFF (s1, s2);
+-      if (diff > 0)
+-	{
+-	  if (encoding == __cet_utf8 && (*(s1 + diff) & MASK_UTF8_7BIT) != 0)
+-	    do
+-	      diff--;
+-	    while (diff > 0 && (*(s1 + diff) & MASK_UTF8_START) != MASK_UTF8_START);
+-	  s1 += diff;
+-	  s2 += diff;
+-	}
+-    }
+-
+   /* Catch empty strings.  */
+   if (__glibc_unlikely (*s1 == '\0') || __glibc_unlikely (*s2 == '\0'))
+     return (*s1 != '\0') - (*s2 != '\0');
+@@ -363,9 +329,8 @@ STRCOLL (const STRING_TYPE *s1, const STRING_TYPE *s2, __locale_t l)
+ 		     byte-level comparison to ensure that we don't waste time
+ 		     going through multiple passes for totally equal strings
+ 		     before proceeding to subsequent passes.  */
+-		  if (pass == 0 && encoding == __cet_other &&
+-		      STRCMP (s1, s2) == 0)
+-		    return result;
++		  if (pass == 0 && STRCMP (s1, s2) == 0)
++                    return result;
+ 		  else
+ 		    break;
+ 	        }
+diff --git a/wcsmbs/wcscoll_l.c b/wcsmbs/wcscoll_l.c
+index 6d9384a..87f240d 100644
+--- a/wcsmbs/wcscoll_l.c
++++ b/wcsmbs/wcscoll_l.c
+@@ -23,7 +23,6 @@
+ #define STRING_TYPE wchar_t
+ #define USTRING_TYPE wint_t
+ #define STRCOLL __wcscoll_l
+-#define STRDIFF __wcsdiff
+ #define STRCMP __wcscmp
+ #define WEIGHT_H "../locale/weightwc.h"
+ #define SUFFIX	WC
+-- 
+1.8.4.2
+

index 2494ad7..71ff824 100644
@@ -39,6 +39,7 @@ SRC_URI = "${GLIBC_GIT_URI};branch=${SRCBRANCH};name=glibc \
            file://0026-eglibc-dl_debug_mask-is-controlled-by-__OPTION_EGLIB.patch \
            file://0027-eglibc-use-option-groups-Conditionally-exclude-c-tes.patch \
            file://nscd-no-bash.patch \
+           file://strcoll-Remove-incorrect-STRDIFF-based-optimization-.patch \
 "
 
 SRC_URI += "\

index fd56841..659e0bd 100644
@@ -56,3 +56,13 @@ PARALLEL_MAKEINST = ""
 do_configure_prepend() {
   cp ${WORKDIR}/find.pl ${S}/util/find.pl
 }
+
+# The crypto_use_bigint patch means that perl's bignum module needs to be
+# installed, but some distributions (for example Fedora 23) don't ship it by
+# default.  As the resulting error is very misleading check for bignum before
+# building.
+do_configure_prepend() {
+	if ! perl -Mbigint -e true; then
+		bbfatal "The perl module 'bignum' was not found but this is required to build openssl.  Please install this module (often packaged as perl-bignum) and re-run bitbake."
+	fi
+}

index 51391db..0cd27db 100644
@@ -1,6 +1,6 @@
 NATIVELSBSTRING = "universal"
 
-UNINATIVE_LOADER = "${STAGING_DIR_NATIVE}/lib/ld-linux-x86-64.so.2"
+UNINATIVE_LOADER ?= "${@bb.utils.contains('BUILD_ARCH', 'x86_64', '${STAGING_DIR_NATIVE}/lib/ld-linux-x86-64.so.2', '${STAGING_DIR_NATIVE}/lib/ld-linux.so.2', d)}"
 
 addhandler uninative_eventhandler
 uninative_eventhandler[eventmask] = "bb.event.BuildStarted"

index 5a4c1b6..44c06e1 100644
@@ -271,9 +271,9 @@ python do_checkpkg() {
         from bb.fetch2 import FetchError, NoMethodError, decodeurl
 
         """first check whether a uri is provided"""
-        src_uri = d.getVar('SRC_URI', True)
+        src_uri = (d.getVar('SRC_URI', True) or '').split()
         if src_uri:
-            uri_type, _, _, _, _, _ = decodeurl(src_uri)
+            uri_type, _, _, _, _, _ = decodeurl(src_uri[0])
         else:
             uri_type = "none"
 

index f48e6a2..dcdef5a 100644
@@ -582,7 +582,7 @@ class DevtoolTests(DevtoolBase):
         # Now try with auto mode
         runCmd('cd %s; git checkout %s %s' % (os.path.dirname(recipefile), testrecipe, os.path.basename(recipefile)))
         result = runCmd('devtool update-recipe %s' % testrecipe)
-        result = runCmd('git rev-parse --show-toplevel')
+        result = runCmd('git rev-parse --show-toplevel', cwd=os.path.dirname(recipefile))
         topleveldir = result.output.strip()
         relpatchpath = os.path.join(os.path.relpath(os.path.dirname(recipefile), topleveldir), testrecipe)
         expected_status = [(' M', os.path.relpath(recipefile, topleveldir)),

index a82a6c8..4de5034 100644
@@ -46,10 +46,11 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
 SRC_URI_append += "file://appendtest.txt"
 """
-    layerappend = "BBLAYERS += \"COREBASE/meta-layertest0 COREBASE/meta-layertest1 COREBASE/meta-layertest2\""
+    layerappend = ''
 
     def tearDownLocal(self):
-        ftools.remove_from_file(self.builddir + "/conf/bblayers.conf", self.layerappend.replace("COREBASE", self.builddir + "/.."))
+        if self.layerappend:
+            ftools.remove_from_file(self.builddir + "/conf/bblayers.conf", self.layerappend)
 
     @testcase(1196)
     def test_layer_appends(self):

@@ -79,7 +80,9 @@ SRC_URI_append += "file://appendtest.txt"
                 with open(layer + "/recipes-test/layerappendtest/appendtest.txt", "w") as f:
                     f.write("Layer 2 test")
             self.track_for_cleanup(layer)
-        ftools.append_file(self.builddir + "/conf/bblayers.conf", self.layerappend.replace("COREBASE", self.builddir + "/.."))
+
+        self.layerappend = "BBLAYERS += \"{0}/meta-layertest0 {0}/meta-layertest1 {0}/meta-layertest2\"".format(corebase)
+        ftools.append_file(self.builddir + "/conf/bblayers.conf", self.layerappend)
         bitbake("layerappendtest")
         data = ftools.read_file(stagingdir + "/appendtest.txt")
         self.assertEqual(data, "Layer 2 test")

index 64465fa..0f7f423 100644
@@ -65,19 +65,19 @@ def base_get_metadata_svn_revision(path, d):
     return revision
 
 def base_get_metadata_git_branch(path, d):
-    import subprocess
+    import bb.process
 
     try:
-        return subprocess.check_output(["git", "rev-parse", "--abbrev-ref", "HEAD"],
-                                       cwd=path).strip()
-    except:
-        return "<unknown>"
+        rev, _ = bb.process.run('git rev-parse --abbrev-ref HEAD', cwd=path)
+    except bb.process.ExecutionError:
+        rev = '<unknown>'
+    return rev.strip()
 
 def base_get_metadata_git_revision(path, d):
-    import subprocess
+    import bb.process
 
     try:
-        return subprocess.check_output(["git", "rev-parse", "HEAD"],
-                                       cwd=path).strip()
-    except:
-        return "<unknown>"
+        rev, _ = bb.process.run('git rev-parse HEAD', cwd=path)
+    except bb.process.ExecutionError:
+        rev = '<unknown>'
+    return rev.strip()

index c616a20..8ad4614 100644
@@ -474,6 +474,7 @@ do_populate_lic[sstate-inputdirs] = "${LICSSTATEDIR}"
 do_populate_lic[sstate-outputdirs] = "${LICENSE_DIRECTORY}/"
 
 ROOTFS_POSTPROCESS_COMMAND_prepend = "write_package_manifest; license_create_manifest; "
+do_rootfs[recrdeptask] += "do_populate_lic"
 
 do_populate_lic_setscene[dirs] = "${LICSSTATEDIR}/${PN}"
 do_populate_lic_setscene[cleandirs] = "${LICSSTATEDIR}"

index 249ec36..d368d4f 100644
@@ -249,7 +249,8 @@ sdk_ext_postinst() {
 		# dash which is /bin/sh on Ubuntu will not preserve the
 		# current working directory when first ran, nor will it set $1 when
 		# sourcing a script. That is why this has to look so ugly.
-		sh -c ". buildtools/environment-setup* > preparing_build_system.log && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> preparing_build_system.log && $target_sdk_dir/ext-sdk-prepare.sh $target_sdk_dir '${SDK_TARGETS}' >> preparing_build_system.log 2>&1" || { echo "SDK preparation failed: see `pwd`/preparing_build_system.log" ; exit 1 ; }
+		LOGFILE="$target_sdk_dir/preparing_build_system.log"
+		sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && $target_sdk_dir/ext-sdk-prepare.sh $target_sdk_dir '${SDK_TARGETS}' >> $LOGFILE 2>&1" || { echo "SDK preparation failed: see $LOGFILE" ; exit 1 ; }
 	fi
 	rm -f $target_sdk_dir/ext-sdk-prepare.sh
 	echo done

index d368d4f..e806d32 100644
@@ -250,7 +250,7 @@ sdk_ext_postinst() {
 		# current working directory when first ran, nor will it set $1 when
 		# sourcing a script. That is why this has to look so ugly.
 		LOGFILE="$target_sdk_dir/preparing_build_system.log"
-		sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && $target_sdk_dir/ext-sdk-prepare.sh $target_sdk_dir '${SDK_TARGETS}' >> $LOGFILE 2>&1" || { echo "SDK preparation failed: see $LOGFILE" ; exit 1 ; }
+		sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && $target_sdk_dir/ext-sdk-prepare.sh $target_sdk_dir '${SDK_TARGETS}' >> $LOGFILE 2>&1" || { echo "ERROR: SDK preparation failed: see $LOGFILE"; echo "printf 'ERROR: this SDK wasn't fully installed and needs reinstalling\n'" >> $env_setup_script ; exit 1 ; }
 	fi
 	rm -f $target_sdk_dir/ext-sdk-prepare.sh
 	echo done

index e806d32..736f17f 100644
@@ -51,7 +51,7 @@ python copy_buildsystem () {
     core_meta_subdir = ''
 
     # Copy in all metadata layers + bitbake (as repositories)
-    buildsystem = oe.copy_buildsystem.BuildSystem(d)
+    buildsystem = oe.copy_buildsystem.BuildSystem('extensible SDK', d)
     baseoutpath = d.getVar('SDK_OUTPUT', True) + '/' + d.getVar('SDKPATH', True)
     layers_copied = buildsystem.copy_bitbake_and_layers(baseoutpath + '/layers')
 

index 979578c..c0e7541 100644
@@ -14,8 +14,9 @@ def _smart_copy(src, dest):
         shutil.copymode(src, dest)
 
 class BuildSystem(object):
-    def __init__(self, d):
+    def __init__(self, context, d):
         self.d = d
+        self.context = context
         self.layerdirs = d.getVar('BBLAYERS', True).split()
 
     def copy_bitbake_and_layers(self, destdir):

@@ -38,7 +39,7 @@ class BuildSystem(object):
             if os.path.exists(layerconf):
                 with open(layerconf, 'r') as f:
                     if f.readline().startswith("# ### workspace layer auto-generated by devtool ###"):
-                        bb.warn("Skipping local workspace layer %s" % layer)
+                        bb.plain("NOTE: Excluding local workspace layer %s from %s" % (layer, self.context))
                         continue
 
             # If the layer was already under corebase, leave it there

index 736f17f..dc05261 100644
@@ -261,6 +261,11 @@ SDK_POST_INSTALL_COMMAND_task-populate-sdk-ext = "${sdk_ext_postinst}"
 SDK_POSTPROCESS_COMMAND_prepend_task-populate-sdk-ext = "copy_buildsystem; install_tools; "
 
 fakeroot python do_populate_sdk_ext() {
+    # FIXME hopefully we can remove this restriction at some point, but uninative
+    # currently forces this upon us
+    if d.getVar('SDK_ARCH', True) != d.getVar('BUILD_ARCH', True):
+        bb.fatal('The extensible SDK can currently only be built for the same architecture as the machine being built on - SDK_ARCH is set to %s (likely via setting SDKMACHINE) which is different from the architecture of the build machine (%s). Unable to continue.' % (d.getVar('SDK_ARCH', True), d.getVar('BUILD_ARCH', True)))
+
     bb.build.exec_func("do_populate_sdk", d)
 }
 

index dc05261..8601c78 100644
@@ -187,10 +187,7 @@ python copy_buildsystem () {
 }
 
 def extsdk_get_buildtools_filename(d):
-    # This is somewhat of a hack
-    localdata = bb.data.createCopy(d)
-    localdata.setVar('PN', 'buildtools-tarball')
-    return localdata.expand('${SDK_NAME}-buildtools-nativesdk-standalone-*.sh')
+    return '*-buildtools-nativesdk-standalone-*.sh'
 
 install_tools() {
 	install -d ${SDK_OUTPUT}/${SDKPATHNATIVE}${bindir_nativesdk}

index 4ef2927..d58e4ed 100644
@@ -1,3 +1,5 @@
+#reset the env_setup_script value to the proper value
+env_setup_script=$target_sdk_dir/environment-setup-@REAL_MULTIMACH_TARGET_SYS@
 # fix dynamic loader paths in all ELF SDK binaries
 native_sysroot=$($SUDO_EXEC cat $env_setup_script |grep 'OECORE_NATIVE_SYSROOT='|cut -d'=' -f2|tr -d '"')
 dl_path=$($SUDO_EXEC find $native_sysroot/lib -name "ld-linux*")

index 98b9f1c..6af37b7 100644
@@ -169,9 +169,20 @@ echo "done"
 
 printf "Setting it up..."
 # fix environment paths
+real_env_setup_script=""
 for env_setup_script in `ls $target_sdk_dir/environment-setup-*`; do
+	if grep -q 'OECORE_NATIVE_SYSROOT=' $env_setup_script; then
+		# Handle custom env setup scripts that are only named
+		# environment-setup-* so that they have relocation
+		# applied - what we want beyond here is the main one
+		# rather than the one that simply sorts last
+		real_env_setup_script="$env_setup_script"
+	fi
 	$SUDO_EXEC sed -e "s:@SDKPATH@:$target_sdk_dir:g" -i $env_setup_script
 done
+if [ -n "$real_env_setup_script" ] ; then
+	env_setup_script="$real_env_setup_script"
+fi
 
 @SDK_POST_INSTALL_COMMAND@
 

index d58e4ed..4ef2927 100644
@@ -1,5 +1,3 @@
-#reset the env_setup_script value to the proper value
-env_setup_script=$target_sdk_dir/environment-setup-@REAL_MULTIMACH_TARGET_SYS@
 # fix dynamic loader paths in all ELF SDK binaries
 native_sysroot=$($SUDO_EXEC cat $env_setup_script |grep 'OECORE_NATIVE_SYSROOT='|cut -d'=' -f2|tr -d '"')
 dl_path=$($SUDO_EXEC find $native_sysroot/lib -name "ld-linux*")

index 806c1e4..9c16506 100755
@@ -1,7 +1,4 @@
 #!/usr/bin/env python
-#
-# gen-lockedsig-cache <locked-sigs.inc> <input-cachedir> <output-cachedir>
-#
 
 import os
 import sys

@@ -18,14 +15,17 @@ def mkdir(d):
 
 if len(sys.argv) < 3:
     print("Incorrect number of arguments specified")
+    print("syntax: gen-lockedsig-cache <locked-sigs.inc> <input-cachedir> <output-cachedir>")
     sys.exit(1)
 
+print('Reading %s' % sys.argv[1])
 sigs = []
 with open(sys.argv[1]) as f:
     for l in f.readlines():
         if ":" in l:
             sigs.append(l.split(":")[2].split()[0])
 
+print('Gathering file list')
 files = set()
 for s in sigs:
     p = sys.argv[2] + "/" + s[:2] + "/*" + s + "*"

@@ -33,10 +33,13 @@ for s in sigs:
     p = sys.argv[2] + "/*/" + s[:2] + "/*" + s + "*"
     files |= set(glob.glob(p))
 
+print('Processing files')
 for f in files:
+    sys.stdout.write('Processing %s... ' % f)
     _, ext = os.path.splitext(f)
     if not ext in ['.tgz', '.siginfo', '.sig']:
         # Most likely a temp file, skip it
+        print('skipping')
         continue
     dst = f.replace(sys.argv[2], sys.argv[3])
     destdir = os.path.dirname(dst)

@@ -45,6 +48,10 @@ for f in files:
     if os.path.exists(dst):
         os.remove(dst)
     if (os.stat(f).st_dev == os.stat(destdir).st_dev):
+        print('linking')
         os.link(f, dst)
     else:
+        print('copying')
         shutil.copyfile(f, dst)
+
+print('Done!')

index 6af37b7..35d3c75 100644
@@ -101,9 +101,9 @@ fi
 
 if [ "$SDK_EXTENSIBLE" = "1" ]; then
 	# We're going to be running the build system, additional restrictions apply
-	if echo "$target_sdk_dir" | grep -q '[+\ @]'; then
+	if echo "$target_sdk_dir" | grep -q '[+\ @$]'; then
 		echo "The target directory path ($target_sdk_dir) contains illegal" \
-		     "characters such as spaces, @ or +. Abort!"
+		     "characters such as spaces, @, \$ or +. Abort!"
 		exit 1
 	fi
 else

index 1285974..c5c647b 100644
@@ -593,7 +593,7 @@ def modify(args, config, basepath, workspace):
             f.write('EXTERNALSRC_BUILD_pn-%s = "%s"\n' % (pn, srctree))
 
         if bb.data.inherits_class('kernel', rd):
-            f.write('SRCTREECOVEREDTASKS = "do_validate_branches do_kernel_checkout do_fetch do_unpack"\n')
+            f.write('SRCTREECOVEREDTASKS = "do_validate_branches do_kernel_checkout do_fetch do_unpack do_patch"\n')
         if initial_rev:
             f.write('\n# initial_rev: %s\n' % initial_rev)
             for commit in commits:

index c5c647b..d9b624d 100644
@@ -456,7 +456,7 @@ def _add_md5(config, recipename, filename):
             f.write('%s|%s|%s\n' % (recipename, os.path.relpath(fn, config.workspace_path), md5))
 
     if os.path.isdir(filename):
-        for root, _, files in os.walk(os.path.dirname(filename)):
+        for root, _, files in os.walk(filename):
             for f in files:
                 addfile(os.path.join(root, f))
     else:

index d387623..ace0b76 100644
@@ -91,15 +91,13 @@ def _remove_patch_dirs(recipefolder):
         for d in dirs:
             shutil.rmtree(os.path.join(root,d))
 
-def _recipe_contains(rf, var):
-    import re
-    found = False
-    with open(rf) as f:
-        for line in f:
-            if re.match("^%s.*=.*" % var, line):
-                found = True
-                break
-    return found
+def _recipe_contains(rd, var):
+    rf = rd.getVar('FILE', True)
+    varfiles = oe.recipeutils.get_var_files(rf, [var], rd)
+    for var, fn in varfiles.iteritems():
+        if fn and fn.startswith(os.path.dirname(rf) + os.sep):
+            return True
+    return False
 
 def _rename_recipe_dirs(oldpv, newpv, path):
     for root, dirs, files in os.walk(path):

@@ -257,7 +255,7 @@ def _extract_new_source(newpv, srctree, no_patch, srcrev, branch, keep_temp, tin
 
     return (rev, md5, sha256)
 
-def _create_new_recipe(newpv, md5, sha256, workspace, rd):
+def _create_new_recipe(newpv, md5, sha256, srcrev, workspace, tinfoil, rd):
     """Creates the new recipe under workspace"""
     crd = rd.createCopy()
 

@@ -271,8 +269,16 @@ def _create_new_recipe(newpv, md5, sha256, workspace, rd):
         newpv = oldpv
     fullpath = _rename_recipe_files(bpn, oldpv, newpv, path)
 
-    if _recipe_contains(fullpath, 'PV') and newpv != oldpv:
-        oe.recipeutils.patch_recipe(d, fullpath, {'PV':newpv})
+    newvalues = {}
+    if _recipe_contains(rd, 'PV') and newpv != oldpv:
+        newvalues['PV'] = newpv
+
+    if srcrev:
+        newvalues['SRCREV'] = srcrev
+
+    if newvalues:
+        rd = oe.recipeutils.parse_recipe(fullpath, None, tinfoil.config_data)
+        oe.recipeutils.patch_recipe(rd, fullpath, newvalues)
 
     if md5 and sha256:
         # Unfortunately, oe.recipeutils.patch_recipe cannot update flags.

@@ -294,7 +300,7 @@ def upgrade(args, config, basepath, workspace):
     if reason:
         raise DevtoolError(reason)
 
-    tinfoil = setup_tinfoil(basepath=basepath)
+    tinfoil = setup_tinfoil(basepath=basepath, tracking=True)
 
     rd = parse_recipe(config, tinfoil, args.recipename, True)
     if not rd:

@@ -316,7 +322,7 @@ def upgrade(args, config, basepath, workspace):
         rev2, md5, sha256 = _extract_new_source(args.version, args.srctree, args.no_patch,
                                                 args.srcrev, args.branch, args.keep_temp,
                                                 tinfoil, rd)
-        rf = _create_new_recipe(args.version, md5, sha256, config.workspace_path, rd)
+        rf = _create_new_recipe(args.version, md5, sha256, args.srcrev, config.workspace_path, tinfoil, rd)
     except bb.process.CmdError as e:
         _upgrade_error(e, rf, args.srctree)
     except DevtoolError as e:

index ace0b76..f033fc8 100644
@@ -117,7 +117,6 @@ def _rename_recipe_file(bpn, oldpv, newpv, path):
         recipe = "%s_git.bb" % bpn
         if os.path.isfile(os.path.join(path, recipe)):
             newrecipe = recipe
-            raise DevtoolError("Original recipe not found on workspace")
     return os.path.join(path, newrecipe)
 
 def _rename_recipe_files(bpn, oldpv, newpv, path):

index f033fc8..6bac44b 100644
@@ -199,6 +199,7 @@ def _extract_new_source(newpv, srctree, no_patch, srcrev, branch, keep_temp, tin
     if srcrev:
         rev = srcrev
     if uri.startswith('git://'):
+        __run('git fetch')
         __run('git checkout %s' % rev)
         __run('git tag -f devtool-base-new')
         md5 = None

index d0b2b91..ab4feb0 100644
@@ -32,6 +32,7 @@ toolchain_create_sdk_env_script () {
 	echo 'export OECORE_TARGET_SYSROOT="$SDKTARGETSYSROOT"' >> $script
 	echo "export OECORE_ACLOCAL_OPTS=\"-I $sdkpathnative/usr/share/aclocal\"" >> $script
 	echo "export PYTHONHOME=$sdkpathnative$prefix" >> $script
+	echo 'unset command_not_found_handle' >> $script
 
 	toolchain_shared_env_script
 }

index 078f58f..d546a5c 100644
@@ -77,16 +77,20 @@ CONFIGUREOPTS = " --build=${BUILD_SYS} \
 		  ${@append_libtool_sysroot(d)}"
 CONFIGUREOPT_DEPTRACK ?= "--disable-dependency-tracking"
 
+AUTOTOOLS_SCRIPT_PATH ?= "${S}"
+CONFIGURE_SCRIPT ?= "${AUTOTOOLS_SCRIPT_PATH}/configure"
+
+AUTOTOOLS_AUXDIR ?= "${AUTOTOOLS_SCRIPT_PATH}"
 
 oe_runconf () {
-	cfgscript="${S}/configure"
+	cfgscript="${CONFIGURE_SCRIPT}"
 	if [ -x "$cfgscript" ] ; then
 		bbnote "Running $cfgscript ${CONFIGUREOPTS} ${EXTRA_OECONF} $@"
 		set +e
 		${CACHED_CONFIGUREVARS} $cfgscript ${CONFIGUREOPTS} ${EXTRA_OECONF} "$@"
 		if [ "$?" != "0" ]; then
 			echo "Configure failed. The contents of all config.log files follows to aid debugging"
-			find ${S} -ignore_readdir_race -name config.log -print -exec cat {} \;
+			find ${B} -ignore_readdir_race -name config.log -print -exec cat {} \;
 			die "oe_runconf failed"
 		fi
 		set -e

@@ -95,8 +99,6 @@ oe_runconf () {
 	fi
 }
 
-AUTOTOOLS_AUXDIR ?= "${S}"
-
 CONFIGURESTAMPFILE = "${WORKDIR}/configure.sstate"
 
 autotools_preconfigure() {

@@ -134,7 +136,7 @@ do_configure[postfuncs] += "autotools_postconfigure"
 ACLOCALDIR = "${B}/aclocal-copy"
 
 python autotools_copy_aclocals () {
-    s = d.getVar("S", True)
+    s = d.getVar("AUTOTOOLS_SCRIPT_PATH", True)
     if not os.path.exists(s + "/configure.in") and not os.path.exists(s + "/configure.ac"):
         if not d.getVar("AUTOTOOLS_COPYACLOCAL", False):
             return

@@ -228,13 +230,13 @@ autotools_do_configure() {
 	( for ac in `find ${S} -ignore_readdir_race -name configure.in -o -name configure.ac`; do
 		rm -f `dirname $ac`/configure
 		done )
-	if [ -e ${S}/configure.in -o -e ${S}/configure.ac ]; then
+	if [ -e ${AUTOTOOLS_SCRIPT_PATH}/configure.in -o -e ${AUTOTOOLS_SCRIPT_PATH}/configure.ac ]; then
 		olddir=`pwd`
-		cd ${S}
+		cd ${AUTOTOOLS_SCRIPT_PATH}
 		ACLOCAL="aclocal --system-acdir=${ACLOCALDIR}/"
 		if [ x"${acpaths}" = xdefault ]; then
 			acpaths=
-			for i in `find ${S} -ignore_readdir_race -maxdepth 2 -name \*.m4|grep -v 'aclocal.m4'| \
+			for i in `find ${AUTOTOOLS_SCRIPT_PATH} -ignore_readdir_race -maxdepth 2 -name \*.m4|grep -v 'aclocal.m4'| \
 				grep -v 'acinclude.m4' | grep -v 'aclocal-copy' | sed -e 's,\(.*/\).*$,\1,'|sort -u`; do
 				acpaths="$acpaths -I $i"
 			done

@@ -265,21 +267,20 @@ autotools_do_configure() {
 				bbnote Executing glib-gettextize --force --copy
 				echo "no" | glib-gettextize --force --copy
 			fi
-		else if grep "^[[:space:]]*AM_GNU_GETTEXT" $CONFIGURE_AC >/dev/null; then
+		elif grep "^[[:space:]]*AM_GNU_GETTEXT" $CONFIGURE_AC >/dev/null; then
 			# We'd call gettextize here if it wasn't so broken...
-				cp ${STAGING_DATADIR_NATIVE}/gettext/config.rpath ${AUTOTOOLS_AUXDIR}/
-				if [ -d ${S}/po/ ]; then
-					cp -f ${STAGING_DATADIR_NATIVE}/gettext/po/Makefile.in.in ${S}/po/
-					if [ ! -e ${S}/po/remove-potcdate.sin ]; then
-						cp ${STAGING_DATADIR_NATIVE}/gettext/po/remove-potcdate.sin ${S}/po/
-					fi
+			cp ${STAGING_DATADIR_NATIVE}/gettext/config.rpath ${AUTOTOOLS_AUXDIR}/
+			if [ -d ${S}/po/ ]; then
+				cp -f ${STAGING_DATADIR_NATIVE}/gettext/po/Makefile.in.in ${S}/po/
+				if [ ! -e ${S}/po/remove-potcdate.sin ]; then
+					cp ${STAGING_DATADIR_NATIVE}/gettext/po/remove-potcdate.sin ${S}/po/
 				fi
-				for i in gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4; do
-					for j in `find ${S} -ignore_readdir_race -name $i | grep -v aclocal-copy`; do
-						rm $j
-					done
-				done
 			fi
+			for i in gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4; do
+				for j in `find ${S} -ignore_readdir_race -name $i | grep -v aclocal-copy`; do
+					rm $j
+				done
+			done
 		fi
 		mkdir -p m4
 		if grep "^[[:space:]]*[AI][CT]_PROG_INTLTOOL" $CONFIGURE_AC >/dev/null; then

@@ -290,7 +291,7 @@ autotools_do_configure() {
 		ACLOCAL="$ACLOCAL" autoreconf -Wcross --verbose --install --force ${EXTRA_AUTORECONF} $acpaths || die "autoreconf execution failed."
 		cd $olddir
 	fi
-	if [ -e ${S}/configure ]; then
+	if [ -e ${CONFIGURE_SCRIPT} ]; then
 		oe_runconf
 	else
 		bbnote "nothing to configure"

index 79a5f501..e223ef6 100644
@@ -8,7 +8,7 @@ and executables, so that far fewer relocations need to be resolved at \
 runtime and thus programs come up faster."
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=c93c0550bd3173f4504b2cbd8991e50b"
-SRCREV = "cdee5a4dd226cc5e9f30f370067a9031f398ef3c"
+SRCREV = "927979bbd115eeb8a75db3231906ef6aca4c4eb6"
 PV = "1.0+git${SRCPV}"
 
 #

@@ -35,7 +35,7 @@ SRC_URI = "git://git.yoctoproject.org/prelink-cross.git;branch=cross_prelink \
 TARGET_OS_ORIG := "${TARGET_OS}"
 OVERRIDES_append = ":${TARGET_OS_ORIG}"
 
-S = "${WORKDIR}/git/trunk"
+S = "${WORKDIR}/git"
 
 inherit autotools 
 

index d63c07f..6f2f224 100644
@@ -25,6 +25,11 @@ def get_gcc_mips_plt_setting(bb, d):
         return "--with-mips-plt"
     return ""
 
+def get_gcc_ppc_plt_settings(bb, d):
+    if d.getVar('TRANSLATED_TARGET_ARCH', True) in [ 'powerpc' ] and not bb.utils.contains('DISTRO_FEATURES', 'bssplt', True, False, d):
+        return "--enable-secureplt"
+    return ""
+
 def get_long_double_setting(bb, d):
     if d.getVar('TRANSLATED_TARGET_ARCH', True) in [ 'powerpc', 'powerpc64' ] and d.getVar('TCLIBC', True) in [ 'uclibc', 'glibc' ]:
         return "--with-long-double-128"

index a14be73..cee6f4a 100644
@@ -47,6 +47,7 @@ EXTRA_OECONF = "\
     ${EXTRA_OECONF_GCC_FLOAT} \
     ${EXTRA_OECONF_PATHS} \
     ${@get_gcc_mips_plt_setting(bb, d)} \
+    ${@get_gcc_ppc_plt_settings(bb, d)} \
     ${@get_long_double_setting(bb, d)} \
     ${@get_gcc_multiarch_setting(bb, d)} \
 "

index 7197447..c0fa139 100644
@@ -26,6 +26,7 @@ EXTRA_OECONF = "\
     ${EXTRA_OECONF_INITIAL} \
     ${@bb.utils.contains('DISTRO_FEATURES', 'ld-is-gold', '--with-ld=${STAGING_BINDIR_TOOLCHAIN}/${TARGET_PREFIX}ld.bfd', '', d)} \
     ${EXTRA_OECONF_GCC_FLOAT} \
+    ${@get_gcc_ppc_plt_settings(bb, d)} \
 "
 
 EXTRA_OECONF += "--with-native-system-header-dir=${SYSTEMHEADERS}"

new file mode 100644
index 0000000..3455df1
@@ -0,0 +1,84 @@
+From cadaf1336332ca7bcdfe4a400776e5782a20e26d Mon Sep 17 00:00:00 2001
+From: "H.J. Lu" <[email protected]>
+Date: Wed, 28 Oct 2015 07:49:44 -0700
+Subject: [PATCH] Keep only ELF_RTYPE_CLASS_{PLT|COPY} bits for prelink
+
+prelink runs ld.so with the environment variable LD_TRACE_PRELINKING
+set to dump the relocation type class from _dl_debug_bindings.  prelink
+has the following relocation type classes:
+
+ #define RTYPE_CLASS_VALID       8
+ #define RTYPE_CLASS_PLT         (8|1)
+ #define RTYPE_CLASS_COPY        (8|2)
+ #define RTYPE_CLASS_TLS         (8|4)
+
+where ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has a conflict with
+RTYPE_CLASS_TLS.
+
+Since prelink only uses ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY
+bits, we should clear the other bits when the DL_DEBUG_PRELINK bit is
+set.
+
+	[BZ #19178]
+	* elf/dl-lookup.c (RTYPE_CLASS_VALID): New.
+	(RTYPE_CLASS_PLT): Likewise.
+	(RTYPE_CLASS_COPY): Likewise.
+	(RTYPE_CLASS_TLS): Likewise.
+	(_dl_debug_bindings): Use RTYPE_CLASS_TLS and RTYPE_CLASS_VALID
+	to set relocation type class for DL_DEBUG_PRELINK.  Keep only
+	ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY bits for
+	DL_DEBUG_PRELINK.
+
+Upstream-Status: submitted (https://sourceware.org/bugzilla/show_bug.cgi?id=19178)
+
+Signed-off-by: Mark Hatle <[email protected]>
+---
+ elf/dl-lookup.c | 21 +++++++++++++++++++--
+ 1 file changed, 19 insertions(+), 2 deletions(-)
+
+diff --git a/elf/dl-lookup.c b/elf/dl-lookup.c
+index 581fb20..6ae6cc3 100644
+--- a/elf/dl-lookup.c
++++ b/elf/dl-lookup.c
+@@ -1016,6 +1016,18 @@ _dl_debug_bindings (const char *undef_name, struct link_map *undef_map,
+ #ifdef SHARED
+   if (GLRO(dl_debug_mask) & DL_DEBUG_PRELINK)
+     {
++/* ELF_RTYPE_CLASS_XXX must match RTYPE_CLASS_XXX used by prelink with
++   LD_TRACE_PRELINKING.  */
++#define RTYPE_CLASS_VALID	8
++#define RTYPE_CLASS_PLT		(8|1)
++#define RTYPE_CLASS_COPY	(8|2)
++#define RTYPE_CLASS_TLS		(8|4)
++#if ELF_RTYPE_CLASS_PLT != 0 && ELF_RTYPE_CLASS_PLT != 1
++# error ELF_RTYPE_CLASS_PLT must be 0 or 1!
++#endif
++#if ELF_RTYPE_CLASS_COPY != 0 && ELF_RTYPE_CLASS_COPY != 2
++# error ELF_RTYPE_CLASS_COPY must be 0 or 2!
++#endif
+       int conflict = 0;
+       struct sym_val val = { NULL, NULL };
+ 
+@@ -1071,12 +1083,17 @@ _dl_debug_bindings (const char *undef_name, struct link_map *undef_map,
+ 
+       if (value->s)
+ 	{
++	  /* Keep only ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY
++	     bits since since prelink only uses them.  */
++	  type_class &= ELF_RTYPE_CLASS_PLT | ELF_RTYPE_CLASS_COPY;
+ 	  if (__glibc_unlikely (ELFW(ST_TYPE) (value->s->st_info)
+ 				== STT_TLS))
+-	    type_class = 4;
++	    /* Clear the RTYPE_CLASS_VALID bit in RTYPE_CLASS_TLS.  */
++	    type_class = RTYPE_CLASS_TLS & ~RTYPE_CLASS_VALID;
+ 	  else if (__glibc_unlikely (ELFW(ST_TYPE) (value->s->st_info)
+ 				     == STT_GNU_IFUNC))
+-	    type_class |= 8;
++	    /* Set the RTYPE_CLASS_VALID bit.  */
++	    type_class |= RTYPE_CLASS_VALID;
+ 	}
+ 
+       if (conflict
+-- 
+1.9.3
+

index 71ff824..c1f6b4e 100644
@@ -40,6 +40,7 @@ SRC_URI = "${GLIBC_GIT_URI};branch=${SRCBRANCH};name=glibc \
            file://0027-eglibc-use-option-groups-Conditionally-exclude-c-tes.patch \
            file://nscd-no-bash.patch \
            file://strcoll-Remove-incorrect-STRDIFF-based-optimization-.patch \
+           file://0028-Clear-ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA-for-prel.patch \
 "
 
 SRC_URI += "\

index 1e45318..45651ba 100644
@@ -9,11 +9,14 @@ Extension."
 HOMEPAGE = "http://cairographics.org"
 BUGTRACKER = "http://bugs.freedesktop.org"
 SECTION = "libs"
+
 LICENSE = "MPL-1 & LGPLv2.1 & GPLv3+"
 LICENSE_${PN} = "MPL-1 & LGPLv2.1"
 LICENSE_${PN}-dev = "MPL-1 & LGPLv2.1"
 LICENSE_${PN}-gobject = "MPL-1 & LGPLv2.1"
+LICENSE_${PN}-script-interpreter = "MPL-1 & LGPLv2.1"
 LICENSE_${PN}-perf-utils = "GPLv3+"
+
 X11DEPENDS = "virtual/libx11 libsm libxrender libxext"
 DEPENDS = "libpng fontconfig pixman glib-2.0 zlib"