Skip to contentSkip to conversation

usb: add clock support for generic EHCI

PATCH New Masahiro Yamada 2 participants 3 messages Jan 25, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 usb: add clock support for generic EHCI

This driver is designed in a generic manner, so clocks should be handled genericly as well.

---

Changes in v3:
- use for () instead of whilt (1)

Changes in v2:
- rephrase git-log
- rebase on commit 12f229ea
- do not store clk devices and IDs in the private data

 drivers/usb/host/ehci-generic.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/usb/host/ehci-generic.c +14 -0
index 1292caa..84114c5 100644
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include "ehci.h"
 
@@ -21,6 +22,19 @@ static int ehci_usb_probe(struct udevice *dev)
 {
 	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
 	struct ehci_hcor *hcor;
+	int i;
+
+	for (i = 0; ; i++) {
+		struct udevice *clk_dev;
+		int clk_id;
+
+		clk_id = clk_get_by_index(dev, i, &clk_dev);
+		if (clk_id < 0)
+			break;
+		if (clk_enable(clk_dev, clk_id))
+			printf("failed to enable clock (dev=%s, id=%d)\n",
+			       clk_dev->name, clk_id);
+	}
 
 	hcor = (struct ehci_hcor *)((uintptr_t)hccr +
 				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
Signature · 1 line
1.9.1