ARM: s3c64xx: Select GPIO_GENERIC_PLATFORM for Cragganmore
Subsystems (3)
PATCH 1/1 ARM: s3c64xx: Select GPIO_GENERIC_PLATFORM for Cragganmore
The Cragganmore machine driver provides platform data for the generic GPIO platform driver which uses structures only defined if the driver is enabled. Since there is little reason to use the platform without the GPIOs add a select to avoid build failures.
--- arch/arm/mach-s3c64xx/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-s3c64xx/Kconfig +1 -0
@@ -310,6 +310,7 @@ config MACH_WLF_CRAGG_6410 depends on I2C=y select CPU_S3C6410 select LEDS_GPIO_REGISTER + select GPIO_GENERIC_PLATFORM select S3C64XX_DEV_SPI0 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_I2C1
Signature · 1 line
2.7.0.rc3
PATCH 1/1 ARM: s3c64xx: Select GPIO_GENERIC_PLATFORM for Cragganmore
Quoted 16 lines · Mark Brown
The Cragganmore machine driver provides platform data for the generic GPIO platform driver which uses structures only defined if the driver is enabled. Since there is little reason to use the platform without the GPIOs add a select to avoid build failures.
Signed-off-by Mark Brown <[email protected]>--- arch/arm/mach-s3c64xx/Kconfig | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-s3c64xx/Kconfig +0
-0
arch/arm/mach-s3c64xx/Kconfig config MACH_WLF_CRAGG_6410 · line 316
Quoted 7 lines
arch/arm/mach-s3c64xx/Kconfig +1
-0@@ -310,6 +310,7 @@ config MACH_WLF_CRAGG_6410 depends on I2C=y select CPU_S3C6410 select LEDS_GPIO_REGISTER + select GPIO_GENERIC_PLATFORM select S3C64XX_DEV_SPI0 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_I2C1
Thanks for the patch!
This was already fixed by Arnd:
http://marc.info/?l=linux-gpio&m=145237423205247&w=2
Best regards,
Krzysztof
PATCH 1/1 ARM: s3c64xx: Select GPIO_GENERIC_PLATFORM for Cragganmore
In reply to Mark BrownQuoted 7 lines · Mark Brown
The Cragganmore machine driver provides platform data for the generic GPIO platform driver which uses structures only defined if the driver is enabled. Since there is little reason to use the platform without the GPIOs add a select to avoid build failures.
Signed-off-by Mark Brown <[email protected]>---
All looks good to me and doesn't cause any issues on my Speyside.
Thanks,
Charles