ARM: dts: imx: ventana: add alternate PWM4 pinmux for GW54xx
Subsystems (2)
PATCH 1/1 ARM: dts: imx: ventana: add alternate PWM4 pinmux for GW54xx
The GW54xx can provide PWM4 out either the off-board backlight connector or the off-board digital I/O connector. By default the pinmux routes it to the backlight connector but this pinctl alternate provides documentation for those who may want to change it.
Signed-off-by Tim Harvey <[email protected]>
--- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +12 -3
@@ -397,8 +397,9 @@ }; &pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; + pinctrl-names = "default", "state_dio"; + pinctrl-0 = <&pinctrl_pwm4_backlight>; + pinctrl-1 = <&pinctrl_pwm4_dio>; status = "okay"; };
@@ -573,12 +574,20 @@ >; }; - pinctrl_pwm4: pwm4grp { + pinctrl_pwm4_backlight: pwm4grpbacklight { fsl,pins = < + /* LVDS_PWM J6.5 */ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; + pinctrl_pwm4_dio: pwm4grpdio { + fsl,pins = < + /* DIO3 J16.4 */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
Signature · 1 line
1.9.1
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx: ventana: add alternate PWM4 pinmux for GW54xx
Quoted 6 lines · Tim Harvey
The GW54xx can provide PWM4 out either the off-board backlight connector or the off-board digital I/O connector. By default the pinmux routes it to the backlight connector but this pinctl alternate provides documentation for those who may want to change it.
Signed-off-by Tim Harvey <[email protected]>
Applied, thanks.