ARM: dts: imx6: remove bogus interrupt-parent from CAAM node

The interrupt-parent property is not needed as it is inherited from the parent bus and in the case of the CAAM node actively points to the wrong interrupt controller (GIC instead of GPC). This leads to the CAAM IRQs not getting unmasked at the GPC level, leaving them unable to wake the CPU from wait mode, potentially impacting performance of the CAAM unit when CPUidle is enabled.

---
 arch/arm/boot/dts/imx6qdl.dtsi | 1 -
 1 file changed, 1 deletion(-)

index 7e4cd4dce593..91dd1f78956a 100644
@@ -876,7 +876,6 @@
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
 				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
 					 <&clks IMX6QDL_CLK_CAAM_IPG>,

2.6.4

Applied, thanks.