Skip to contentSkip to conversation

ARM: imx6sx-sdb: add i2c3 node

PATCH New Christoph Fritz 2 participants 2 messages Jan 24, 2016 – Feb 1, 2016

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Christoph Fritz

author
#0 lore raw

PATCH 1/1 ARM: imx6sx-sdb: add i2c3 node

This patch adds node i2c bus 3 to get the appropriate userland device file. So for prototyping it's possible to experiment within userland.

Signed-off-by Christoph Fritz <[email protected]>
---
 arch/arm/boot/dts/imx6sx-sdb.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/arm/boot/dts/imx6sx-sdb.dtsi +14 -0
index e0dc1ee..3d91627 100644
@@ -197,6 +197,13 @@
 	status = "okay";
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &i2c4 {
         clock-frequency = <100000>;
         pinctrl-names = "default";

@@ -398,6 +405,13 @@
 			>;
 		};
 
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
 		pinctrl_i2c4: i2c4grp {
 			fsl,pins = <
 				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
Signature · 1 line
2.1.4
Applied
#1 lore raw

PATCH 1/1 ARM: imx6sx-sdb: add i2c3 node

Quoted 4 lines · Christoph Fritz

This patch adds node i2c bus 3 to get the appropriate userland device file. So for prototyping it's possible to experiment within userland.

Signed-off-by Christoph Fritz <[email protected]>

Applied, thanks.