ARM: dts: shmobile: Rename the serial port clock to fck
Subsystems (2)
Geert Uytterhoeven
maintainerv4 cover ARM: dts: shmobile: Rename the serial port clock to fck
Hi Simon, Magnus,
This patch series renames the serial port clock to fck, as accepted in the DT bindings in v4.5-rc1.
Changes compared to v4:
- Changed one-line summary prefix to match current arm-soc practices,
- Split off h8/300 patch,
- Rebased,
Changes compared to v3:
- Add Acked-by,
- Update for "[PATCH 0/2] ARM: shmobile: r8a7793: Increase scif support".
Dependencies:
- This series was created on top of "[PATCH v4 0/7] ARM: dts: R-Car:
Add SCIF fallback compatibility strings", but I think it applies to plain renesas-devel-20160129-v4.5-rc1, too.
Thanks for applying!
Geert Uytterhoeven (1):
arm64: dts: r8a7795: Rename the serial port clock to fck
Laurent Pinchart (10):
ARM: dts: sh73a0: Rename the serial port clock to fck
ARM: dts: r7s72100: Rename the serial port clock to fck
ARM: dts: r8a73a4: Rename the serial port clock to fck
ARM: dts: r8a7740: Rename the serial port clock to fck
ARM: dts: r8a7778: Rename the serial port clock to fck
ARM: dts: r8a7779: Rename the serial port clock to fck
ARM: dts: r8a7790: Rename the serial port clock to fck
ARM: dts: r8a7791: Rename the serial port clock to fck
ARM: dts: r8a7793: Rename the serial port clock to fck
ARM: dts: r8a7794: Rename the serial port clock to fck
arch/arm/boot/dts/r7s72100.dtsi | 16 +++++++------- arch/arm/boot/dts/r8a73a4.dtsi | 12 +++++------ arch/arm/boot/dts/r8a7740.dtsi | 18 ++++++++-------- arch/arm/boot/dts/r8a7778.dtsi | 12 +++++------ arch/arm/boot/dts/r8a7779.dtsi | 12 +++++------ arch/arm/boot/dts/r8a7790.dtsi | 20 +++++++++--------- arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++---------------- arch/arm/boot/dts/r8a7793.dtsi | 36 ++++++++++++++++---------------- arch/arm/boot/dts/r8a7794.dtsi | 36 ++++++++++++++++---------------- arch/arm/boot/dts/sh73a0.dtsi | 18 ++++++++-------- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++---------- 11 files changed, 119 insertions(+), 119 deletions(-)
Signature · 12 lines
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsGeert Uytterhoeven
maintainerPATCH v4 1/11 ARM: dts: sh73a0: Rename the serial port clock to fck
From: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/sh73a0.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/boot/dts/sh73a0.dtsi +9 -9
@@ -359,7 +359,7 @@ reg = <0xe6c40000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -369,7 +369,7 @@ reg = <0xe6c50000 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -379,7 +379,7 @@ reg = <0xe6c60000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -389,7 +389,7 @@ reg = <0xe6c70000 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -399,7 +399,7 @@ reg = <0xe6c80000 0x100>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -409,7 +409,7 @@ reg = <0xe6cb0000 0x100>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -419,7 +419,7 @@ reg = <0xe6cc0000 0x100>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -429,7 +429,7 @@ reg = <0xe6cd0000 0x100>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -439,7 +439,7 @@ reg = <0xe6c30000 0x100>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 2/11 ARM: dts: r7s72100: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r7s72100.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
arch/arm/boot/dts/r7s72100.dtsi +8 -8
@@ -158,7 +158,7 @@ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -171,7 +171,7 @@ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -184,7 +184,7 @@ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -197,7 +197,7 @@ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -210,7 +210,7 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -223,7 +223,7 @@ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -236,7 +236,7 @@ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -249,7 +249,7 @@ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 3/11 ARM: dts: r8a73a4: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a73a4.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/r8a73a4.dtsi +6 -6
@@ -335,7 +335,7 @@ reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -345,7 +345,7 @@ reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -355,7 +355,7 @@ reg = <0 0xe6c40000 0 0x100>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -365,7 +365,7 @@ reg = <0 0xe6c50000 0 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -375,7 +375,7 @@ reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -385,7 +385,7 @@ reg = <0 0xe6cf0000 0 0x100>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 4/11 ARM: dts: r8a7740: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7740.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/boot/dts/r8a7740.dtsi +9 -9
@@ -214,7 +214,7 @@ reg = <0xe6c40000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -224,7 +224,7 @@ reg = <0xe6c50000 0x100>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -234,7 +234,7 @@ reg = <0xe6c60000 0x100>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -244,7 +244,7 @@ reg = <0xe6c70000 0x100>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -254,7 +254,7 @@ reg = <0xe6c80000 0x100>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -264,7 +264,7 @@ reg = <0xe6cb0000 0x100>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -274,7 +274,7 @@ reg = <0xe6cc0000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -284,7 +284,7 @@ reg = <0xe6cd0000 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
@@ -294,7 +294,7 @@ reg = <0xe6c30000 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 5/11 ARM: dts: r8a7778: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7778.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/r8a7778.dtsi +6 -6
@@ -302,7 +302,7 @@ reg = <0xffe40000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -313,7 +313,7 @@ reg = <0xffe41000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -324,7 +324,7 @@ reg = <0xffe42000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -335,7 +335,7 @@ reg = <0xffe43000 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -346,7 +346,7 @@ reg = <0xffe44000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -357,7 +357,7 @@ reg = <0xffe45000 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 6/11 ARM: dts: r8a7779: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/r8a7779.dtsi +6 -6
@@ -216,7 +216,7 @@ reg = <0xffe40000 0x100>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -227,7 +227,7 @@ reg = <0xffe41000 0x100>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -238,7 +238,7 @@ reg = <0xffe42000 0x100>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -249,7 +249,7 @@ reg = <0xffe43000 0x100>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -260,7 +260,7 @@ reg = <0xffe44000 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
@@ -271,7 +271,7 @@ reg = <0xffe45000 0x100>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 7/11 ARM: dts: r8a7790: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
arch/arm/boot/dts/r8a7790.dtsi +10 -10
@@ -590,7 +590,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -603,7 +603,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -616,7 +616,7 @@ reg = <0 0xe6c60000 0 64>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -629,7 +629,7 @@ reg = <0 0xe6c20000 0 64>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -642,7 +642,7 @@ reg = <0 0xe6c30000 0 64>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -655,7 +655,7 @@ reg = <0 0xe6ce0000 0 64>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -668,7 +668,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -681,7 +681,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -694,7 +694,7 @@ reg = <0 0xe62c0000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -707,7 +707,7 @@ reg = <0 0xe62c8000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 8/11 ARM: dts: r8a7791: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/r8a7791.dtsi +18 -18
@@ -569,7 +569,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -582,7 +582,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -595,7 +595,7 @@ reg = <0 0xe6c60000 0 64>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -608,7 +608,7 @@ reg = <0 0xe6c70000 0 64>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -621,7 +621,7 @@ reg = <0 0xe6c78000 0 64>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -634,7 +634,7 @@ reg = <0 0xe6c80000 0 64>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -647,7 +647,7 @@ reg = <0 0xe6c20000 0 64>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -660,7 +660,7 @@ reg = <0 0xe6c30000 0 64>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -673,7 +673,7 @@ reg = <0 0xe6ce0000 0 64>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -686,7 +686,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -699,7 +699,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -712,7 +712,7 @@ reg = <0 0xe6e58000 0 64>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -725,7 +725,7 @@ reg = <0 0xe6ea8000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -738,7 +738,7 @@ reg = <0 0xe6ee0000 0 64>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -751,7 +751,7 @@ reg = <0 0xe6ee8000 0 64>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -764,7 +764,7 @@ reg = <0 0xe62c0000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -777,7 +777,7 @@ reg = <0 0xe62c8000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -790,7 +790,7 @@ reg = <0 0xe62d0000 0 96>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 9/11 ARM: dts: r8a7793: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- Rebase on top of "[PATCH 0/2] ARM: shmobile: r8a7793: Increase scif support",
- Rename new clock references added by the series above,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7793.dtsi | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/r8a7793.dtsi +18 -18
@@ -484,7 +484,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -497,7 +497,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -510,7 +510,7 @@ reg = <0 0xe6c60000 0 64>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -523,7 +523,7 @@ reg = <0 0xe6c70000 0 64>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -536,7 +536,7 @@ reg = <0 0xe6c78000 0 64>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -549,7 +549,7 @@ reg = <0 0xe6c80000 0 64>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -562,7 +562,7 @@ reg = <0 0xe6c20000 0 64>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -575,7 +575,7 @@ reg = <0 0xe6c30000 0 64>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -588,7 +588,7 @@ reg = <0 0xe6ce0000 0 64>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -601,7 +601,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -614,7 +614,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -627,7 +627,7 @@ reg = <0 0xe6e58000 0 64>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -640,7 +640,7 @@ reg = <0 0xe6ea8000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -653,7 +653,7 @@ reg = <0 0xe6ee0000 0 64>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -666,7 +666,7 @@ reg = <0 0xe6ee8000 0 64>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -679,7 +679,7 @@ reg = <0 0xe62c0000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -692,7 +692,7 @@ reg = <0 0xe62c8000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -705,7 +705,7 @@ reg = <0 0xe62d0000 0 96>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 10/11 ARM: dts: r8a7794: Rename the serial port clock to fck
In reply to Geert UytterhoevenFrom: Laurent Pinchart <[email protected]>
The clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
--- arch/arm/boot/dts/r8a7794.dtsi | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/r8a7794.dtsi +18 -18
@@ -287,7 +287,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -300,7 +300,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -313,7 +313,7 @@ reg = <0 0xe6c60000 0 64>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -326,7 +326,7 @@ reg = <0 0xe6c70000 0 64>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -339,7 +339,7 @@ reg = <0 0xe6c78000 0 64>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -352,7 +352,7 @@ reg = <0 0xe6c80000 0 64>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -365,7 +365,7 @@ reg = <0 0xe6c20000 0 64>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -378,7 +378,7 @@ reg = <0 0xe6c30000 0 64>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -391,7 +391,7 @@ reg = <0 0xe6ce0000 0 64>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -404,7 +404,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -417,7 +417,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -430,7 +430,7 @@ reg = <0 0xe6e58000 0 64>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -443,7 +443,7 @@ reg = <0 0xe6ea8000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -456,7 +456,7 @@ reg = <0 0xe6ee0000 0 64>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -469,7 +469,7 @@ reg = <0 0xe6ee8000 0 64>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -482,7 +482,7 @@ reg = <0 0xe62c0000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -495,7 +495,7 @@ reg = <0 0xe62c8000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
@@ -508,7 +508,7 @@ reg = <0 0xe62d0000 0 96>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v4 11/11 arm64: dts: r8a7795: Rename the serial port clock to fck
In reply to Geert UytterhoevenThe clock is really the device functional clock, not the interface clock. Rename it.
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- Add Acked-by,
v2:
- New.
--- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +11 -11
@@ -480,7 +480,7 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -494,7 +494,7 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -508,7 +508,7 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -522,7 +522,7 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -536,7 +536,7 @@ reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -549,7 +549,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -562,7 +562,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -575,7 +575,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -588,7 +588,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -601,7 +601,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>;
@@ -614,7 +614,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>;
Signature · 1 line
1.9.1
v4 cover ARM: dts: shmobile: Rename the serial port clock to fck
In reply to Geert UytterhoevenQuoted 4 lines · Geert Uytterhoeven
Hi Simon, Magnus,
This patch series renames the serial port clock to fck, as accepted in the DT bindings in v4.5-rc1.
Thanks, I have queued this up.