mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver
PATCH 1/1 mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver
This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>
Acked-by Christian Rauch <[email protected]>
--- drivers/mfd/Kconfig | 2 ++ drivers/mfd/kempld-core.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+)
drivers/mfd/Kconfig +2 -0
@@ -435,6 +435,8 @@ config MFD_KEMPLD * COMe-cDC2 (microETXexpress-DC) * COMe-cHL6 * COMe-cPC2 (microETXexpress-PC) + * COMe-cSL6 + * COMe-mAL10 * COMe-mBT10 * COMe-mCT10 * COMe-mTT10 (nanoETXexpress-TT)
drivers/mfd/kempld-core.c +16 -0
@@ -624,6 +624,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "CSL6", + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Kontron" ), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident ="CVV6" , .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -647,6 +655,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "MAL1", + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Kontron" ), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident ="MBR1" , .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
Signature · 1 line
2.5.0
Quoted 6 lines · Michael Brunner
This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>Acked-by Christian Rauch <[email protected]>
Acked-by Guenter Roeck <[email protected]>
Quoted 53 lines
--- drivers/mfd/Kconfig | 2 ++ drivers/mfd/kempld-core.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+)drivers/mfd/Kconfig +2
-0@@ -435,6 +435,8 @@ config MFD_KEMPLD * COMe-cDC2 (microETXexpress-DC) * COMe-cHL6 * COMe-cPC2 (microETXexpress-PC) + * COMe-cSL6 + * COMe-mAL10 * COMe-mBT10 * COMe-mCT10 * COMe-mTT10 (nanoETXexpress-TT)drivers/mfd/kempld-core.c +16
-0@@ -624,6 +624,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "CSL6", + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Kontron" ), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident ="CVV6" , .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),@@ -647,6 +655,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "MAL1", + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Kontron" ), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident ="MBR1" , .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
Quoted 6 lines · Michael Brunner
This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>Acked-by Christian Rauch <[email protected]>
Consistent with established practice for this driver.
Reviewed-by Darren Hart <[email protected]>
Signature · 2 lines
Darren Hart Intel Open Source Technology Center