Skip to contentSkip to conversation

ixgbe: make __ixgbe_setup_tc static

PATCH New Emil Tantilov 3 participants 3 messages Feb 17, 2016 – Mar 3, 2016

Subsystems (2)
Network drivers Intel Ethernet
lore
Share & tools
lore

Emil Tantilov

author
#0 lore raw

PATCH 1/1 ixgbe: make __ixgbe_setup_tc static

This function is only used in ixgbe_main.c
Resolves a "missing prototype" warning when building the driver with W=1

Reported-by Phil Schmitt <[email protected]>
Signed-off-by Emil Tantilov <[email protected]>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +2 -2
index 46b0ac5..e8e0818 100644
@@ -8355,8 +8355,8 @@ err_out:
 	return -EINVAL;
 }
 
-int __ixgbe_setup_tc(struct net_device *dev, u32 handle, __be16 proto,
-		     struct tc_to_netdev *tc)
+static int __ixgbe_setup_tc(struct net_device *dev, u32 handle, __be16 proto,
+			    struct tc_to_netdev *tc)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
#2 lore raw

PATCH 1/1 ixgbe: make __ixgbe_setup_tc static

In reply to Emil Tantilov
Quoted 7 lines

-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Emil Tantilov
Sent: Wednesday, February 17, 2016 3:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH] ixgbe: make __ixgbe_setup_tc static

Quoted 8 lines

This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1

Reported-by Phil Schmitt <[email protected]>
Signed-off-by Emil Tantilov <[email protected]>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Tested-by Andrew Bowers <[email protected]>

No "missing prototype" warning at compile time