rc: sunxi-cir: support module autoloading
Subsystems (6)
PATCH 1/3 rc: sunxi-cir: support module autoloading
From: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on systems supporting infrared. This commit adds the missing line so it works out of the box when built as a module and running on a sunxi system with an infrared receiver.
--- drivers/media/rc/sunxi-cir.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/rc/sunxi-cir.c +1 -0
@@ -326,6 +326,7 @@ static const struct of_device_id sunxi_ir_match[] = { { .compatible = "allwinner,sun5i-a13-ir", }, {}, }; +MODULE_DEVICE_TABLE (of, sunxi_ir_match);static struct platform_driver sunxi_ir_driver = { .probe = sunxi_ir_probe,
Signature · 1 line
2.7.1
PATCH 2/3 dmaengine: sun4i: support module autoloading
From: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on supported systems. This commit adds the missing line so it loads automatically when building it as a module and running on a system with the early sunxi DMA engine.
--- drivers/dma/sun4i-dma.c | 1 + 1 file changed, 1 insertion(+)
drivers/dma/sun4i-dma.c +1 -0
@@ -1271,6 +1271,7 @@ static const struct of_device_id sun4i_dma_match[] = { { .compatible = "allwinner,sun4i-a10-dma" }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE (of, sun4i_dma_match);static struct platform_driver sun4i_dma_driver = { .probe = sun4i_dma_probe,
Signature · 1 line
2.7.1
PATCH 2/3 dmaengine: sun4i: support module autoloading
Hello Emilio,
Quoted 9 lines · Emilio L?pez
From: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE()is missing, so the module isn't auto-loading on supported systems. This commit adds the missing line so it loads automatically when building it as a module and running on a system with the early sunxi DMA engine.Signed-off-by Emilio L?pez <[email protected]>---
Best regards,
Javier
Vinod Koul
AppliedPATCH 2/3 dmaengine: sun4i: support module autoloading
In reply to Emilio LópezQuoted 6 lines · Emilio López
From: Emilio López <[email protected]>
MODULE_DEVICE_TABLE()is missing, so the module isn't auto-loading on supported systems. This commit adds the missing line so it loads automatically when building it as a module and running on a system with the early sunxi DMA engine.
Applied, thanks
Signature · 1 line
~Vinod
PATCH 3/3 usb: musb: sunxi: support module autoloading
In reply to Emilio LópezFrom: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on sunxi systems using the OTG controller. This commit adds the missing line so it loads automatically when building it as a module and running on a system with an USB OTG port.
--- drivers/usb/musb/sunxi.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/musb/sunxi.c +1 -0
@@ -752,6 +752,7 @@ static const struct of_device_id sunxi_musb_match[] = { { .compatible = "allwinner,sun8i-a33-musb", }, {} }; +MODULE_DEVICE_TABLE (of, sunxi_musb_match);static struct platform_driver sunxi_musb_driver = { .probe = sunxi_musb_probe,
Signature · 1 line
2.7.1
PATCH 3/3 usb: musb: sunxi: support module autoloading
Hello Emilio,
Quoted 9 lines · Emilio L?pez
From: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE()is missing, so the module isn't auto-loading on sunxi systems using the OTG controller. This commit adds the missing line so it loads automatically when building it as a module and running on a system with an USB OTG port.Signed-off-by Emilio L?pez <[email protected]>---
Best regards,
Javier
PATCH 1/3 rc: sunxi-cir: support module autoloading
In reply to Emilio LópezHello Emilio,
Quoted 8 lines · Emilio L?pez
From: Emilio L?pez <[email protected]>
MODULE_DEVICE_TABLE()is missing, so the module isn't auto-loading on systems supporting infrared. This commit adds the missing line so it works out of the box when built as a module and running on a sunxi system with an infrared receiver.Signed-off-by Emilio L?pez <[email protected]>
Looks good to me.
Best regards,
Javier