ARM: dts: sun5i-a13-inet98v-rev2: Remove mmc2 node
Subsystems (3)
PATCH 1/3 ARM: dts: sun5i-a13-inet98v-rev2: Remove mmc2 node
The sun5i-a13-inet98v-rev2 does not have an emmc, it uses nand, the mmc2 node in the dts comes from a copy and paste error from the utoo-p66 dts, remove it.
--- arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts | 15 --------------- 1 file changed, 15 deletions(-)
arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts +0 -15
@@ -123,21 +123,6 @@ status = "okay"; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; - - mmccard: mmccard at 0 { - reg = <0>; - compatible = "mmc-card"; - broken-hpi; - }; -}; - &otg_sram { status = "okay"; };
Signature · 1 line
2.7.2
PATCH 2/3 ARM: dts: sun5i-a13-empire-electronix-d709: Remove mmc2 node
The empire-electronix-d709 does not have an emmc, it uses nand, the mmc2 node in the dts comes from a copy and paste error from the inet98fv2 dts, remove it.
While at it also do s/inet98fv2/d709/ to fix some other copy/paste leftovers.
--- .../arm/boot/dts/sun5i-a13-empire-electronix-d709.dts | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)
arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +2 -17
@@ -123,7 +123,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
@@ -131,27 +131,12 @@ status = "okay"; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; - - mmccard: mmccard at 0 { - reg = <0>; - compatible = "mmc-card"; - broken-hpi; - }; -}; - &otg_sram { status = "okay"; }; &pio { - mmc0_cd_pin_inet98fv2: mmc0_cd_pin at 0 { + mmc0_cd_pin_d709: mmc0_cd_pin at 0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>;
Signature · 1 line
2.7.2
Maxime Ripard
AppliedPATCH 2/3 ARM: dts: sun5i-a13-empire-electronix-d709: Remove mmc2 node
Quoted 8 lines · Hans de Goede
The empire-electronix-d709 does not have an emmc, it uses nand, the mmc2 node in the dts comes from a copy and paste error from the inet98fv2 dts, remove it.
While at it also do s/inet98fv2/d709/ to fix some other copy/paste leftovers.
Signed-off-by Hans de Goede <[email protected]>
Queued for 4.7, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160311/4895e4f3/attachment.sig>
PATCH 3/3 ARM: dts: sun5i: Add dts for Difrence DIT4350 tablet
In reply to Hans de GoedeThe Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and rtl8188etv wifi.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts | 226 ++++++++++++++++++++++++ 2 files changed, 227 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -640,6 +640,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a10s-wobo-i5.dtb \ + sun5i-a13-difrnce-dit4350.dtb \ sun5i-a13-empire-electronix-d709.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \
arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts new file +226 -0
226 lines not on this page · raw message
Signature · 1 line
2.7.2
Maxime Ripard
AppliedPATCH 3/3 ARM: dts: sun5i: Add dts for Difrence DIT4350 tablet
Quoted 6 lines · Hans de Goede
The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address
0x48, Memsic MXC622X accelerometer at i2c1 address0x15and rtl8188etv wifi.Signed-off-by Hans de Goede <[email protected]>
Queued, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160311/38d429c8/attachment.sig>
Maxime Ripard
AppliedPATCH 1/3 ARM: dts: sun5i-a13-inet98v-rev2: Remove mmc2 node
In reply to Hans de GoedeQuoted 5 lines · Hans de Goede
The sun5i-a13-inet98v-rev2 does not have an emmc, it uses nand, the mmc2 node in the dts comes from a copy and paste error from the utoo-p66 dts, remove it.
Signed-off-by Hans de Goede <[email protected]>
Queued for 4.7, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160311/0d5ac9be/attachment.sig>