dmaengine: sun6i: Upgrade for audio transfers
Subsystems (2)
v3 cover dmaengine: sun6i: Upgrade for audio transfers
This patch series replaces the 2nd part of the previous series 'dmaengine: sun6i: Fixes and upgrade for audio transfers'. It contains the required changes to the sun6i DMA driver for audio streaming.
These ones have been tested in a Allwinner H3 (Orange PI 2).
Changes since v2
- do some optimizations
- add a check about the maxburst value '4' (Maxime Ripard)
- remove the driver fixes
Changes since v1 (comments from Vinod Koul and Sergei Shtylyov - thanks)
- typo fixes
- change some comments
- better handling of burst and bus width
- remove useless code in the cyclic capability patch
Jean-Francois Moine (5):
dmaengine: sun6i: Simplify and fix lli setting
dmaengine: sun6i: Add 4 as a possible burst value for H3
dmaengine: sun6i: Add cyclic capability
dmaengine: sun6i: Simplify some macros
dmaengine: sun6i: Compact a bit some config constants
drivers/dma/sun6i-dma.c | 264 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 197 insertions(+), 67 deletions(-)
Signature · 1 line
2.7.4
PATCH v3 1/5 dmaengine: sun6i: Simplify and fix lli setting
Checking the DMA config before setting the lli list avoids to do tests inside the setting loop.
Also, in case of audio streaming, the sound PCM DMA engine sets only the burst and bus width of the device. Set the lacking memory values to system values while checking the config.
--- drivers/dma/sun6i-dma.c | 116 +++++++++++++++++++++++++----------------------- 1 file changed, 61 insertions(+), 55 deletions(-)
drivers/dma/sun6i-dma.c +61 -55
@@ -276,45 +276,6 @@ static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,return next; } -static inline int sun6i_dma_cfg_lli (struct sun6i_dma_lli *lli, -dma_addr_t src, -dma_addr_t dst,u32 len, -struct dma_slave_config *config) -{ -s8 src_width, dst_width, src_burst, dst_burst; - -if (!config) -return -EINVAL ; - - src_burst =convert_burst (config->src_maxburst); -if (src_burst <0 ) -return src_burst; - - dst_burst =convert_burst (config->dst_maxburst); -if (dst_burst <0 ) -return dst_burst; - - src_width =convert_buswidth (config->src_addr_width); -if (src_width <0 ) -return src_width; - - dst_width =convert_buswidth (config->dst_addr_width); -if (dst_width <0 ) -return dst_width; - - lli->cfg =DMA_CHAN_CFG_SRC_BURST (src_burst) | -DMA_CHAN_CFG_SRC_WIDTH (src_width) | -DMA_CHAN_CFG_DST_BURST (dst_burst) | -DMA_CHAN_CFG_DST_WIDTH (dst_width); - - lli->src = src; - lli->dst = dst; - lli->len = len; - lli->para =NORMAL_WAIT ; - -return 0 ; -} -static inline void sun6i_dma_dump_lli (struct sun6i_vchan *vchan,struct sun6i_dma_lli *lli) {
@@ -502,6 +463,49 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)return ret; } +static int set_config (struct sun6i_dma_dev *sdev, +struct dma_slave_config *sconfig, +enum dma_transfer_direction direction, +u32 *p_cfg) +{ +s8 src_width, dst_width, src_burst, dst_burst; + +if (direction ==DMA_MEM_TO_DEV ) { + src_burst =convert_burst (sconfig->src_maxburst ? + sconfig->src_maxburst :8 ); + src_width =convert_buswidth (sconfig->src_addr_width != +DMA_SLAVE_BUSWIDTH_UNDEFINED ? + sconfig->src_addr_width : +DMA_SLAVE_BUSWIDTH_4_BYTES ); + dst_burst =convert_burst (sconfig->dst_maxburst); + dst_width =convert_buswidth (sconfig->dst_addr_width); + }else {/* DMA_DEV_TO_MEM */ + src_burst =convert_burst (sconfig->src_maxburst); + src_width =convert_buswidth (sconfig->src_addr_width); + dst_burst =convert_burst (sconfig->dst_maxburst ? + sconfig->dst_maxburst :8 ); + dst_width =convert_buswidth (sconfig->dst_addr_width != +DMA_SLAVE_BUSWIDTH_UNDEFINED ? + sconfig->dst_addr_width : +DMA_SLAVE_BUSWIDTH_4_BYTES ); + } +if (src_burst <0 ) +return src_burst; +if (src_width <0 ) +return src_width; +if (dst_burst <0 ) +return dst_burst; +if (dst_width <0 ) +return dst_width; + + *p_cfg =DMA_CHAN_CFG_SRC_BURST (src_burst) | +DMA_CHAN_CFG_SRC_WIDTH (src_width) | +DMA_CHAN_CFG_DST_BURST (dst_burst) | +DMA_CHAN_CFG_DST_WIDTH (dst_width); + +return 0 ; +} +static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy (struct dma_chan *chan,dma_addr_t dest,dma_addr_t src,size_t len,unsigned long flags)
@@ -569,6 +573,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(struct sun6i_desc *txd;struct scatterlist *sg;dma_addr_t p_lli; +u32 lli_cfg;int i, ret;if (!sgl)
@@ -579,6 +584,12 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(return NULL ; } + ret =set_config (sdev, sconfig, dir, &lli_cfg); +if (ret) { +dev_err (chan2dev (chan),"Invalid DMA configuration\n" ); +return NULL ; + } + txd =kzalloc (sizeof (*txd),GFP_NOWAIT );if (!txd)return NULL ;
@@ -588,14 +599,14 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(if (!v_lli) goto err_lli_free; -if (dir ==DMA_MEM_TO_DEV ) { - ret =sun6i_dma_cfg_lli (v_lli,sg_dma_address (sg), - sconfig->dst_addr,sg_dma_len (sg), - sconfig); -if (ret) - goto err_cur_lli_free; + v_lli->len =sg_dma_len (sg); + v_lli->para =NORMAL_WAIT ; - v_lli->cfg |=DMA_CHAN_CFG_DST_IO_MODE | +if (dir ==DMA_MEM_TO_DEV ) { + v_lli->src =sg_dma_address (sg); + v_lli->dst = sconfig->dst_addr; + v_lli->cfg = lli_cfg | +DMA_CHAN_CFG_DST_IO_MODE |DMA_CHAN_CFG_SRC_LINEAR_MODE |DMA_CHAN_CFG_SRC_DRQ (DRQ_SDRAM ) |DMA_CHAN_CFG_DST_DRQ (vchan->port);
@@ -607,13 +618,10 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg( sg_dma_len(sg), flags); }else { - ret =sun6i_dma_cfg_lli (v_lli, sconfig->src_addr, -sg_dma_address (sg),sg_dma_len (sg), - sconfig); -if (ret) - goto err_cur_lli_free; - - v_lli->cfg |=DMA_CHAN_CFG_DST_LINEAR_MODE | + v_lli->src = sconfig->src_addr; + v_lli->dst =sg_dma_address (sg); + v_lli->cfg = lli_cfg | +DMA_CHAN_CFG_DST_LINEAR_MODE |DMA_CHAN_CFG_SRC_IO_MODE |DMA_CHAN_CFG_DST_DRQ (DRQ_SDRAM ) |DMA_CHAN_CFG_SRC_DRQ (vchan->port);
@@ -634,8 +642,6 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(return vchan_tx_prep (&vchan->vc, &txd->vd, flags); -err_cur_lli_free: -dma_pool_free (sdev->pool, v_lli, p_lli); err_lli_free:for (prev = txd->v_lli; prev; prev = prev->v_lli_next)dma_pool_free (sdev->pool, prev,virt_to_phys (prev));
Signature · 1 line
2.7.4
PATCH v3 1/5 dmaengine: sun6i: Simplify and fix lli setting
Quoted 5 lines · Jean-Francois Moine
Checking the DMA config before setting the lli list avoids to do tests inside the setting loop.
Also, in case of audio streaming, the sound PCM DMA engine sets only the burst and bus width of the device. Set the lacking memory values to system values while checking the config.
You're doing two separate and unrelated things here, please make two patches.
Also, you commit title says you fix something, but you never say what the issue actually is in the commit log.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160321/d45b98a5/attachment.sig>
PATCH v3 2/5 dmaengine: sun6i: Add 4 as a possible burst value for the H3
In reply to Jean-Francois MoineThe H3 accepts 4 as a burst value.
--- drivers/dma/sun6i-dma.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/dma/sun6i-dma.c +9 -0
@@ -101,6 +101,7 @@ struct sun6i_dma_config {u32 nr_max_channels;u32 nr_max_requests;u32 nr_max_vchans; +u32 burst_4; };/*
@@ -238,6 +239,8 @@ static inline s8 convert_burst(u32 maxburst)switch (maxburst) {case 1 :return 0 ; +case 4 : +return 1 ;case 8 :return 2 ;default :
@@ -470,6 +473,10 @@ static int set_config(struct sun6i_dma_dev *sdev, {s8 src_width, dst_width, src_burst, dst_burst; +if (!sdev->cfg->burst_4 && + (sconfig->src_maxburst ==4 || sconfig->dst_maxburst ==4 )) +return -EINVAL ; +if (direction ==DMA_MEM_TO_DEV ) { src_burst =convert_burst (sconfig->src_maxburst ? sconfig->src_maxburst :8 );
@@ -900,12 +907,14 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {/* * The H3 has 12 physical channels, a maximum DRQ port id of 27, * and a total of 34 usable source and destination endpoints. +* Setting the maxburst to '4' is possible. */ static struct sun6i_dma_config sun8i_h3_dma_cfg = { .nr_max_channels =12 , .nr_max_requests =27 , .nr_max_vchans =34 , + .burst_4 =1 , };static const struct of_device_id sun6i_dma_match[] = {
Signature · 1 line
2.7.4
PATCH v3 2/5 dmaengine: sun6i: Add 4 as a possible burst value for the H3
Quoted 29 lines · Jean-Francois Moine
The H3 accepts 4 as a burst value.
Signed-off-by Jean-Francois Moine <[email protected]>--- drivers/dma/sun6i-dma.c | 9 +++++++++ 1 file changed, 9 insertions(+)drivers/dma/sun6i-dma.c +3
-0@@ -101,6 +101,7 @@ struct sun6i_dma_config {u32 nr_max_channels;u32 nr_max_requests;u32 nr_max_vchans; +u32 burst_4; };/* @@ -238,6 +239,8 @@ static inline s8 convert_burst(u32 maxburst)switch (maxburst) {case 1 :return 0 ; +case 4 : +return 1 ;case 8 :return 2 ;default :
drivers/dma/sun6i-dma.c static int set_config(struct sun6i_dma_dev *sdev, · line 479
Quoted 7 lines
drivers/dma/sun6i-dma.c +4
-0@@ -470,6 +473,10 @@ static int set_config(struct sun6i_dma_dev *sdev, {s8 src_width, dst_width, src_burst, dst_burst; +if (!sdev->cfg->burst_4 && + (sconfig->src_maxburst ==4 || sconfig->dst_maxburst ==4 )) +return -EINVAL ; +
I still believe this should be dealt with at the framework level.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160321/b12e55d5/attachment.sig>
PATCH v3 2/5 dmaengine: sun6i: Add 4 as a possible burst value for the H3
Quoted 10 lines · On Mon, 21 Mar 2016 08:29:18 +0100 Maxime Ripard…
drivers/dma/sun6i-dma.c static int set_config(struct sun6i_dma_dev *sdev, · line 479
Quoted 8 lines
drivers/dma/sun6i-dma.c +4
-0@@ -470,6 +473,10 @@ static int set_config(struct sun6i_dma_dev *sdev, {s8 src_width, dst_width, src_burst, dst_burst; +if (!sdev->cfg->burst_4 && + (sconfig->src_maxburst ==4 || sconfig->dst_maxburst ==4 )) +return -EINVAL ; +I still believe this should be dealt with at the framework level.
What do you mean? In the DMA clients?
Signature · 2 lines
Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
PATCH v3 2/5 dmaengine: sun6i: Add 4 as a possible burst value for the H3
Quoted 7 lines · Jean-Francois Moine
Quoted 4 lines · On Mon, 21 Mar 2016 08:29:18 +0100 Maxime Ripard…
Quoted 4 lines
drivers/dma/sun6i-dma.c +0
-0@@ -470,6 +473,10 @@ static int set_config(struct sun6i_dma_dev *sdev, {s8 src_width, dst_width, src_burst, dst_burst;
Quoted 8 lines
Quoted 6 lines
drivers/dma/sun6i-dma.c static int set_config(struct sun6i_dma_dev *sdev, · line 479
Quoted 4 lines
drivers/dma/sun6i-dma.c +4
-0+if (!sdev->cfg->burst_4 && + (sconfig->src_maxburst ==4 || sconfig->dst_maxburst ==4 )) +return -EINVAL ; +I still believe this should be dealt with at the framework level.
What do you mean? In the DMA clients?
No, in the dmaengine framework.
A driver should register the burst size they support, and dmaengine_slave_config would reject any invalid burst size based on that.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160329/3d482454/attachment-0001.sig>
PATCH v3 2/5 dmaengine: sun6i: Add 4 as a possible burst value for the H3
Quoted 15 lines · On Tue, 29 Mar 2016 08:46:50 +0200 Maxime Ripard…
Quoted 14 lines · Jean-Francois Moine
Quoted 10 lines · On Mon, 21 Mar 2016 08:29:18 +0100 Maxime Ripard…
drivers/dma/sun6i-dma.c static int set_config(struct sun6i_dma_dev *sdev, · line 479
Quoted 8 lines
drivers/dma/sun6i-dma.c +4
-0@@ -470,6 +473,10 @@ static int set_config(struct sun6i_dma_dev *sdev, {s8 src_width, dst_width, src_burst, dst_burst; +if (!sdev->cfg->burst_4 && + (sconfig->src_maxburst ==4 || sconfig->dst_maxburst ==4 )) +return -EINVAL ; +I still believe this should be dealt with at the framework level.
Quoted 7 lines
Quoted 1 line
What do you mean? In the DMA clients?
No, in the dmaengine framework.
A driver should register the burst size they support, and
dmaengine_slave_configwould reject any invalid burst size based on that.
Maybe you are right, but this does not seem to be very easy: the max burst size is on a u32 value, and, as a bit map (256Mb) is forbidden, the DMA drivers should declare a list of (min, max) authorized values.
Well, I will not start such a development for just testing if 4 is a good burst size when calling the sun6i DMA driver...
Signature · 2 lines
Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
PATCH v3 3/5 dmaengine: sun6i: Add cyclic capability
In reply to Jean-Francois MoineDMA cyclic transfers are required by audio streaming.
--- drivers/dma/sun6i-dma.c | 129 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 122 insertions(+), 7 deletions(-)
drivers/dma/sun6i-dma.c +122 -7
@@ -147,6 +147,8 @@ struct sun6i_vchan {struct dma_slave_config cfg;struct sun6i_pchan *phy;u8 port; +u8 irq_type; +bool cyclic; };struct sun6i_dma_dev {
@@ -257,6 +259,30 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)return addr_width >>1 ; } +static size_t sun6i_get_chan_size (struct sun6i_pchan *pchan) +{ +struct sun6i_desc *txd = pchan->desc; +struct sun6i_dma_lli *lli; +size_t bytes; +dma_addr_t pos; + + pos =readl (pchan->base +DMA_CHAN_LLI_ADDR ); + bytes =readl (pchan->base +DMA_CHAN_CUR_CNT ); + +if (pos ==LLI_LAST_ITEM ) +return bytes; + +for (lli = txd->v_lli; lli; lli = lli->v_lli_next) { +if (lli->p_lli_next == pos) { +for (lli = lli->v_lli_next; lli; lli = lli->v_lli_next) + bytes += lli->len; +break ; + } + } + +return bytes; +} + static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev, struct sun6i_dma_lli *next, dma_addr_t next_phy,
@@ -345,8 +371,12 @@ static int sun6i_dma_start_desc(struct sun6i_vchan *vchan) irq_reg = pchan->idx /DMA_IRQ_CHAN_NR ; irq_offset = pchan->idx %DMA_IRQ_CHAN_NR ; + vchan->irq_type = vchan->cyclic ?DMA_IRQ_PKG :DMA_IRQ_QUEUE ; + irq_val =readl (sdev->base +DMA_IRQ_EN (irq_reg)); - irq_val |=DMA_IRQ_QUEUE << (irq_offset *DMA_IRQ_CHAN_WIDTH ); + irq_val &= ~((DMA_IRQ_HALF |DMA_IRQ_PKG |DMA_IRQ_QUEUE ) << + (irq_offset *DMA_IRQ_CHAN_WIDTH )); + irq_val |= vchan->irq_type << (irq_offset *DMA_IRQ_CHAN_WIDTH );writel (irq_val, sdev->base +DMA_IRQ_EN (irq_reg));writel (pchan->desc->p_lli, pchan->base +DMA_CHAN_LLI_ADDR );
@@ -443,11 +473,12 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)writel (status, sdev->base +DMA_IRQ_STAT (i));for (j =0 ; (j <DMA_IRQ_CHAN_NR ) && status; j++) { -if (status &DMA_IRQ_QUEUE ) { - pchan = sdev->pchans + j; - vchan = pchan->vchan; - -if (vchan) { + pchan = sdev->pchans + j; + vchan = pchan->vchan; +if (vchan && (status & vchan->irq_type)) { +if (vchan->cyclic) { +vchan_cyclic_callback (&pchan->desc->vd); + }else {spin_lock (&vchan->vc.lock);vchan_cookie_complete (&pchan->desc->vd); pchan->done = pchan->desc;
@@ -656,6 +687,78 @@ err_lli_free:return NULL ; } +static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic ( +struct dma_chan *chan, +dma_addr_t buf_addr, +size_t buf_len, +size_t period_len, +enum dma_transfer_direction dir, +unsigned long flags) +{ +struct sun6i_dma_dev *sdev =to_sun6i_dma_dev (chan->device); +struct sun6i_vchan *vchan =to_sun6i_vchan (chan); +struct dma_slave_config *sconfig = &vchan->cfg; +struct sun6i_dma_lli *v_lli, *prev =NULL ; +struct sun6i_desc *txd; +dma_addr_t p_lli; +u32 lli_cfg; +unsigned int i, periods = buf_len / period_len; +int ret; + + ret =set_config (sdev, sconfig, dir, &lli_cfg); +if (ret) { +dev_err (chan2dev (chan),"Invalid DMA configuration\n" ); +return NULL ; + } + + txd =kzalloc (sizeof (*txd),GFP_NOWAIT ); +if (!txd) +return NULL ; + +for (i =0 ; i < periods; i++){ + v_lli =dma_pool_alloc (sdev->pool,GFP_NOWAIT , &p_lli); +if (!v_lli) { +dev_err (sdev->slave.dev,"Failed to alloc lli memory\n" ); + goto err_lli_free; + } + + v_lli->len = period_len; + v_lli->para =NORMAL_WAIT ; + +if (dir ==DMA_MEM_TO_DEV ) { + v_lli->src = buf_addr + period_len * i; + v_lli->dst = sconfig->dst_addr; + v_lli->cfg = lli_cfg | +DMA_CHAN_CFG_DST_IO_MODE | +DMA_CHAN_CFG_SRC_LINEAR_MODE | +DMA_CHAN_CFG_SRC_DRQ (DRQ_SDRAM ) | +DMA_CHAN_CFG_DST_DRQ (vchan->port); + }else { + v_lli->src = sconfig->src_addr; + v_lli->dst = buf_addr + period_len * i; + v_lli->cfg = lli_cfg | +DMA_CHAN_CFG_DST_LINEAR_MODE | +DMA_CHAN_CFG_SRC_IO_MODE | +DMA_CHAN_CFG_DST_DRQ (DRQ_SDRAM ) | +DMA_CHAN_CFG_SRC_DRQ (vchan->port); + } + + prev =sun6i_dma_lli_add (prev, v_lli, p_lli, txd); + } + + prev->p_lli_next = txd->p_lli;/* cyclic list */ + + vchan->cyclic = true; + +return vchan_tx_prep (&vchan->vc, &txd->vd, flags); + +err_lli_free: +for (prev = txd->v_lli; prev; prev = prev->v_lli_next) +dma_pool_free (sdev->pool, prev,virt_to_phys (prev)); +kfree (txd); +return NULL ; +} +static int sun6i_dma_config (struct dma_chan *chan,struct dma_slave_config *config) {
@@ -725,6 +828,16 @@ static int sun6i_dma_terminate_all(struct dma_chan *chan)spin_lock_irqsave (&vchan->vc.lock, flags); +if (vchan->cyclic) { + vchan->cyclic = false; +if (pchan && pchan->desc) { +struct virt_dma_desc *vd = &pchan->desc->vd; +struct virt_dma_chan *vc = &vchan->vc; + +list_add_tail (&vd->node, &vc->desc_completed); + } + } +vchan_get_all_descriptors (&vchan->vc, &head);if (pchan) {
@@ -772,7 +885,7 @@ static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan, }else if (!pchan || !pchan->desc) { bytes =0 ; }else { - bytes =readl (pchan->base +DMA_CHAN_CUR_CNT ); + bytes =sun6i_get_chan_size (pchan); }spin_unlock_irqrestore (&vchan->vc.lock, flags);
@@ -978,6 +1091,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)dma_cap_set (DMA_PRIVATE , sdc->slave.cap_mask);dma_cap_set (DMA_MEMCPY , sdc->slave.cap_mask);dma_cap_set (DMA_SLAVE , sdc->slave.cap_mask); +dma_cap_set (DMA_CYCLIC , sdc->slave.cap_mask);INIT_LIST_HEAD (&sdc->slave.channels); sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources;
@@ -985,6 +1099,7 @@ static int sun6i_dma_probe(struct platform_device *pdev) sdc->slave.device_issue_pending = sun6i_dma_issue_pending; sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg; sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy; + sdc->slave.device_prep_dma_cyclic = sun6i_dma_prep_dma_cyclic; sdc->slave.copy_align =DMAENGINE_ALIGN_4_BYTES ; sdc->slave.device_config = sun6i_dma_config; sdc->slave.device_pause = sun6i_dma_pause;
Signature · 1 line
2.7.4
PATCH v3 3/5 dmaengine: sun6i: Add cyclic capability
Quoted 3 lines · Jean-Francois Moine
DMA cyclic transfers are required by audio streaming.
Signed-off-by Jean-Francois Moine <[email protected]>
Thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160321/0e0a1055/attachment.sig>
PATCH v3 4/5 dmaengine: sun6i: Simplify some macros
In reply to Jean-Francois MoineAs the max burst and bus width values are now checked, there is no reason to check them again when setting the hardware registers.
--- drivers/dma/sun6i-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/sun6i-dma.c +2 -2
@@ -65,8 +65,8 @@#define DMA_CHAN_CFG_SRC_DRQ (x) ((x) & 0x1f)#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5) -#define DMA_CHAN_CFG_SRC_BURST (x) (((x) & 0x3) << 7) -#define DMA_CHAN_CFG_SRC_WIDTH (x) (((x) & 0x3) << 9) +#define DMA_CHAN_CFG_SRC_BURST (x) ((x) << 7) +#define DMA_CHAN_CFG_SRC_WIDTH (x) ((x) << 9)#define DMA_CHAN_CFG_DST_DRQ (x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16)#define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16)
Signature · 1 line
2.7.4
PATCH v3 4/5 dmaengine: sun6i: Simplify some macros
Quoted 13 lines · Jean-Francois Moine
As the max burst and bus width values are now checked, there is no reason to check them again when setting the hardware registers.
Signed-off-by Jean-Francois Moine <[email protected]>--- drivers/dma/sun6i-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/dma/sun6i-dma.c +0
-0
drivers/dma/sun6i-dma.c line 69
Quoted 7 lines
drivers/dma/sun6i-dma.c +2
-2@@ -65,8 +65,8 @@#define DMA_CHAN_CFG_SRC_DRQ (x) ((x) & 0x1f)#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5) -#define DMA_CHAN_CFG_SRC_BURST (x) (((x) & 0x3) << 7) -#define DMA_CHAN_CFG_SRC_WIDTH (x) (((x) & 0x3) << 9) +#define DMA_CHAN_CFG_SRC_BURST (x) ((x) << 7) +#define DMA_CHAN_CFG_SRC_WIDTH (x) ((x) << 9)
Well, you can easily end up with values higher than that. I still believe that making sure you only always write what is expected is a good thing.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160321/8f446f4c/attachment.sig>
PATCH v3 4/5 dmaengine: sun6i: Simplify some macros
Quoted 9 lines · On Mon, 21 Mar 2016 08:48:43 +0100 Maxime Ripard…
Quoted 8 lines · Jean-Francois Moine
As the max burst and bus width values are now checked, there is no reason to check them again when setting the hardware registers.
Signed-off-by Jean-Francois Moine <[email protected]>--- drivers/dma/sun6i-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Quoted 16 lines
drivers/dma/sun6i-dma.c line 69
Quoted 12 lines
drivers/dma/sun6i-dma.c +2
-2@@ -65,8 +65,8 @@#define DMA_CHAN_CFG_SRC_DRQ (x) ((x) & 0x1f)#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5) -#define DMA_CHAN_CFG_SRC_BURST (x) (((x) & 0x3) << 7) -#define DMA_CHAN_CFG_SRC_WIDTH (x) (((x) & 0x3) << 9) +#define DMA_CHAN_CFG_SRC_BURST (x) ((x) << 7) +#define DMA_CHAN_CFG_SRC_WIDTH (x) ((x) << 9)Well, you can easily end up with values higher than that. I still believe that making sure you only always write what is expected is a good thing.
How the values could be higher? They are locally generated in convert_burst() and convert_buswidth() from checked client values.
Signature · 2 lines
Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
PATCH v3 5/5 dmaengine: sun6i: Compact a bit some config constants
In reply to Jean-Francois MoineAll config SoC specific values are less than 128. Store them as bytes.
--- drivers/dma/sun6i-dma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/dma/sun6i-dma.c +4 -4
@@ -98,10 +98,10 @@* to a certain compatible string. */ struct sun6i_dma_config { -u32 nr_max_channels; -u32 nr_max_requests; -u32 nr_max_vchans; -u32 burst_4; +u8 nr_max_channels; +u8 nr_max_requests; +u8 nr_max_vchans; +u8 burst_4; };/*
Signature · 1 line
2.7.4