Skip to contentSkip to conversation

configs: rename Zynq defconfig files

PATCH New Masahiro Yamada 2 participants 2 messages Mar 3, 2016 – Mar 31, 2016 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs: rename Zynq defconfig files

These three are Zynq boards and the build procedure is almost the same. Having the SoC name prefix "zynq_" would be more consistent. Also, this is the way in which the Linux Device Trees and the U-Boot configuration files do.

This commit renames as follows:

zedboard_defconfig -> zynq_zed_defconfig
microzed_defconfig -> zynq_microzed_defconfig
xilinx_zc706_defconfig -> zynq_zc706_defconfig

---

 board/avnet/microzed/readme.txt                          | 2 +-
 board/avnet/zedboard/readme.txt                          | 2 +-
 board/xilinx/zc706/readme.txt                            | 2 +-
 configs/{microzed_defconfig => zynq_microzed_defconfig}  | 0
 configs/{xilinx_zc706_defconfig => zynq_zc706_defconfig} | 0
 configs/{zedboard_defconfig => zynq_zed_defconfig}       | 0
 6 files changed, 3 insertions(+), 3 deletions(-)
 rename configs/{microzed_defconfig => zynq_microzed_defconfig} (100%)
 rename configs/{xilinx_zc706_defconfig => zynq_zc706_defconfig} (100%)
 rename configs/{zedboard_defconfig => zynq_zed_defconfig} (100%)
board/avnet/microzed/readme.txt +1 -1
index ab47069..d0fc5ee 100644
@@ -7,7 +7,7 @@ available from http://www.zedboard.org .
 
 Steps to create a working system for Microzed:
 
-1) make microzed_defconfig
+1) make zynq_microzed_defconfig
 2) make
 3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
 	uImage, zynq-zed.dtb into your SD card
board/avnet/zedboard/readme.txt +1 -1
index 0f72d0d..01ef97c 100644
@@ -7,7 +7,7 @@ available from http://www.zedboard.org .
 
 Steps to create a working system for Zedboard:
 
-1) make zedboard_defconfig
+1) make zynq_zed_defconfig
 2) make
 3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
 	uImage, zynq-zed.dtb into your SD card
board/xilinx/zc706/readme.txt +1 -1
index 273752f..b180dea 100644
@@ -16,7 +16,7 @@ boot.bin file.
 If you already have the Xilinx tools installed, the following sequence
 will unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
 
-make xilinx_zc706_defconfig
+make zynq_zc706_defconfig
 make uboot-patch
 cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \
    output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
configs/zynq_microzed_defconfig renamed from configs/microzed_defconfig +0 -0
similarity index 100%
rename from configs/microzed_defconfig
rename to configs/zynq_microzed_defconfig
configs/zynq_zc706_defconfig renamed from configs/xilinx_zc706_defconfig +0 -0
similarity index 100%
rename from configs/xilinx_zc706_defconfig
rename to configs/zynq_zc706_defconfig
configs/zynq_zed_defconfig renamed from configs/zedboard_defconfig +0 -0
similarity index 100%
rename from configs/zedboard_defconfig
rename to configs/zynq_zed_defconfig
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 configs: rename Zynq defconfig files

Hello,

Quoted 5 lines · Masahiro Yamada

These three are Zynq boards and the build procedure is almost the same. Having the SoC name prefix "zynq_" would be more consistent. Also, this is the way in which the Linux Device Trees and the U-Boot configuration files do.

Quoted 8 lines

This commit renames as follows:

   zedboard_defconfig     -> zynq_zed_defconfig
   microzed_defconfig     -> zynq_microzed_defconfig
   xilinx_zc706_defconfig -> zynq_zc706_defconfig

---

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com