arm: dts: imx6q-ba16: Disable pwm2 by default
Subsystems (2)
PATCH 1/1 arm: dts: imx6q-ba16: Disable pwm2 by default
From: Justin Waters <[email protected]>
pwm2 is provided on the BA16 Q7 module, but is not used on any of the current configurations. However, future platforms may utilize this device, so we are simply disabling the node rather than removing it completely.
Signed-off-by Justin Waters <[email protected]>
Signed-off-by Akshay Bhat <[email protected]>
--- arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6q-ba16.dtsi +1 -1
@@ -337,7 +337,7 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; + status = "disabled"; }; &sata {
Signature · 1 line
2.8.0
PATCH 1/1 arm: dts: imx6q-ba16: Disable pwm2 by default
Quoted 9 lines · Akshay Bhat
From: Justin Waters <[email protected]>
pwm2 is provided on the BA16 Q7 module, but is not used on any of the current configurations. However, future platforms may utilize this device, so we are simply disabling the node rather than removing it completely.
Signed-off-by Justin Waters <[email protected]>Signed-off-by Akshay Bhat <[email protected]>
Changed the lowercase 'arm' to 'ARM' in subject and applied the patch.
Shawn
Quoted 21 lines
--- arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/imx6q-ba16.dtsi +1
-1@@ -337,7 +337,7 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; + status = "disabled"; }; &sata {Signature · 1 line
2.8.0