Skip to contentSkip to conversation

ARM: dts: imx28: add alternative pinmuxing for mac0

PATCH New Uwe Kleine-König 2 participants 2 messages Apr 6, 2016 – Apr 12, 2016

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Uwe Kleine-König

author
#0 lore raw

PATCH 1/1 ARM: dts: imx28: add alternative pinmuxing for mac0

Signed-off-by Uwe Kleine-K?nig <[email protected]>
---
 arch/arm/boot/dts/imx28.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
arch/arm/boot/dts/imx28.dtsi +26 -0
index 4e073e854742..8058adf42ea6 100644
@@ -423,6 +423,32 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
+				mac0_pins_b: mac0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				mac1_pins_a: mac1 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
Signature · 1 line
2.7.0
Applied
#1 lore raw

PATCH 1/1 ARM: dts: imx28: add alternative pinmuxing for mac0

Quoted 1 line · Uwe Kleine-K?nig
Signed-off-by Uwe Kleine-K?nig <[email protected]>

Applied, thanks.

Quoted 49 lines
---
 arch/arm/boot/dts/imx28.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
arch/arm/boot/dts/imx28.dtsi +26 -0
index 4e073e854742..8058adf42ea6 100644
@@ -423,6 +423,32 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
+				mac0_pins_b: mac0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				mac1_pins_a: mac1 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
Signature · 7 lines
2.7.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel