Please pull u-boot-marvell/master

Hi Tom,

please pull the following small fixes and board-specific changes:

The following changes since commit bbf8bef196ae52517284a0a2e2ffc94a4ff89f5f:

Prepare v2016.05-rc1 (2016-04-11 22:22:25 -0400)

are available in the git repository at:

git://www.denx.de/git/u-boot-marvell.git

for you to fetch changes up to aca84a214d70953505d56b7c9717d1a7c019902c:

arm: mvebu: theadorable: Remove Board name output in checkboard (2016-04-12 11:13:40 +0200)

----------------------------------------------------------------
Stefan Roese (7):
gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register
arm: mvebu: theadorable: Add bootcounter support
arm: mvebu: Add base address for 2nd I2C controller
arm: mvebu: theadorable: Enable 2nd I2C controller
arm: mvebu: theadorable: Add PEX-switch detection and reset code
arm: mvebu: theadorable: Remove Board name output in checkboard

 arch/arm/mach-mvebu/include/mach/soc.h |   1 +
 board/theadorable/theadorable.c        | 103 ++++++++++++++++++++++++++++++++-
 drivers/gpio/mvebu_gpio.c              |   4 ++
 include/configs/theadorable.h          |  10 ++++
 4 files changed, 116 insertions(+), 2 deletions(-)

Applied to u-boot/master, thanks!

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160412/5d186afa/attachment.sig>

Applied to u-boot/master, thanks!

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160412/05c2cb08/attachment.sig>