ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
Subsystems (3)
PATCH 1/1 ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
The Lenovo 100S netbook has a codec controller for which there is a driver, but doesn't know how to access the device. This adds the necessary ACPI table for the driver to find the device.
Device (TTLV)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "10TI3100") // _HID: Hardware ID
Name (_CID, "10TI3100") // _CID: Compatible ID
Name (_DDN, "TI TLV320AIC3100 Codec Controller ") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID
--- sound/soc/codecs/tlv320aic31xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
sound/soc/codecs/tlv320aic31xx.c +10 -0
@@ -28,6 +28,7 @@#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> +#include <linux/acpi.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/slab.h>
@@ -1280,10 +1281,19 @@ static const struct i2c_device_id aic31xx_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, aic31xx_i2c_id); +#ifdef CONFIG_ACPI +static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (acpi, aic31xx_acpi_match); +#endif +static struct i2c_driver aic31xx_i2c_driver = { .driver = { .name ="tlv320aic31xx-codec" , .of_match_table =of_match_ptr (tlv320aic31xx_of_match), + .acpi_match_table =ACPI_PTR (aic31xx_acpi_match), }, .probe = aic31xx_i2c_probe, .remove = aic31xx_i2c_remove,
Signature · 1 line
2.7.3
Mark Brown
maintainersound/soc/codecs/tlv320aic31xx.c static const struct i2c_device_id aic31xx_i2c_id[] = { · line 1286
Quoted 2 lines · Bastien Nocera
sound/soc/codecs/tlv320aic31xx.c +2
-0+static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 },
An ACPI identifier that actually bears some resemblance to the name of the part, will wonders never cease! :)
Quoted 6 lines · Mark Brown
sound/soc/codecs/tlv320aic31xx.c static const struct i2c_device_id aic31xx_i2c_id[] = { · line 1286
Quoted 2 lines · Bastien Nocera
sound/soc/codecs/tlv320aic31xx.c +2
-0+static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 },An ACPI identifier that actually bears some resemblance to the name of the part, will wonders never cease! :)
It's not a legit ACPI id but at least it's consistent with other BIOS. I see the same in a couple of DSDT I extracted. it'd be curious to see the schematics if you have them to help progress with Baytrail-CR support.
Mark Brown
maintainerQuoted 9 lines · Pierre-Louis Bossart
Quoted 7 lines · Mark Brown
sound/soc/codecs/tlv320aic31xx.c static const struct i2c_device_id aic31xx_i2c_id[] = { · line 1286
Quoted 2 lines · Bastien Nocera
sound/soc/codecs/tlv320aic31xx.c +2
-0+static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 },An ACPI identifier that actually bears some resemblance to the name of the part, will wonders never cease! :)
Quoted 3 lines
It's not a legit ACPI id but at least it's consistent with other BIOS. I see the same in a couple of DSDT I extracted. it'd be curious to see the schematics if you have them to help progress with Baytrail-CR support.
It's in the right form at least, dunno if TI actually registered 10TI properly or not though.
Quoted 7 lines · Mark Brown
Quoted 6 lines · Pierre-Louis Bossart
Quoted 5 lines · Mark Brown
sound/soc/codecs/tlv320aic31xx.c static const struct i2c_device_id aic31xx_i2c_id[] = { · line 1286
Quoted 2 lines · Bastien Nocera
sound/soc/codecs/tlv320aic31xx.c +2
-0+static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 },An ACPI identifier that actually bears some resemblance to the name of the part, will wonders never cease! :)
Quoted 5 lines
Quoted 3 lines
It's not a legit ACPI id but at least it's consistent with other BIOS. I see the same in a couple of DSDT I extracted. it'd be curious to see the schematics if you have them to help progress with Baytrail-CR support.
It's in the right form at least, dunno if TI actually registered 10TI properly or not though.
The PNP ID for TI is TXN
The ACPI ID is TXNW
TI's PCI ID is 0x104C.
so nope, none of the legit vendor IDs match 10TI, which doesn't follow the rules... No one seems to care in the BIOS world though, it's becoming a lost cause.
Quoted 6 lines · Pierre-Louis Bossart
Quoted 4 lines · Mark Brown
Quoted 1 line · Bastien Nocera
Quoted 7 lines
Quoted 4 lines
sound/soc/codecs/tlv320aic31xx.c static const struct i2c_device_id aic31xx_i2c_id[] = { · line 1286
Quoted 2 lines
sound/soc/codecs/tlv320aic31xx.c +2
-0+static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 },An ACPI identifier that actually bears some resemblance to the name of the part, will wonders never cease! :)
It's not a legit ACPI id but at least it's consistent with other BIOS. I see the same in a couple of DSDT I extracted. it'd be curious to see the schematics if you have them to help progress with Baytrail-CR support.
The DSDT for that device is at:
http://noraisin.net/lenovo-100s/dsdt.dsl
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Mark Brown
maintainerApplied "ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S" to the asoc tree
In reply to Bastien NoceraThe patch
ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
f5cc17720b61af382a053d49a4a14c3d14857a5bMon Sep 17 00:00:00 2001
From: Bastien Nocera <[email protected]>
Date: Tue, 19 Apr 2016 18:00:20 +0200
Subject: [PATCH] ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
The Lenovo 100S netbook has a codec controller for which there is a driver, but doesn't know how to access the device. This adds the necessary ACPI table for the driver to find the device.
Device (TTLV)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "10TI3100") // _HID: Hardware ID
Name (_CID, "10TI3100") // _CID: Compatible ID
Name (_DDN, "TI TLV320AIC3100 Codec Controller ") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID
--- sound/soc/codecs/tlv320aic31xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
sound/soc/codecs/tlv320aic31xx.c +10 -0
@@ -28,6 +28,7 @@#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> +#include <linux/acpi.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/slab.h>
@@ -1280,10 +1281,19 @@ static const struct i2c_device_id aic31xx_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, aic31xx_i2c_id); +#ifdef CONFIG_ACPI +static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (acpi, aic31xx_acpi_match); +#endif +static struct i2c_driver aic31xx_i2c_driver = { .driver = { .name ="tlv320aic31xx-codec" , .of_match_table =of_match_ptr (tlv320aic31xx_of_match), + .acpi_match_table =ACPI_PTR (aic31xx_acpi_match), }, .probe = aic31xx_i2c_probe, .remove = aic31xx_i2c_remove,
Signature · 1 line
2.8.0.rc3
Mark Brown
maintainerApplied "ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S" to the asoc tree
In reply to Bastien NoceraThe patch
ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
11f9192cc16cd26f16fb0fa2b18ce4440a7a1623Mon Sep 17 00:00:00 2001
From: Bastien Nocera <[email protected]>
Date: Tue, 19 Apr 2016 18:00:20 +0200
Subject: [PATCH] ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100S
The Lenovo 100S netbook has a codec controller for which there is a driver, but doesn't know how to access the device. This adds the necessary ACPI table for the driver to find the device.
Device (TTLV)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "10TI3100") // _HID: Hardware ID
Name (_CID, "10TI3100") // _CID: Compatible ID
Name (_DDN, "TI TLV320AIC3100 Codec Controller ") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID
--- sound/soc/codecs/tlv320aic31xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
sound/soc/codecs/tlv320aic31xx.c +10 -0
@@ -28,6 +28,7 @@#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> +#include <linux/acpi.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/slab.h>
@@ -1280,10 +1281,19 @@ static const struct i2c_device_id aic31xx_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, aic31xx_i2c_id); +#ifdef CONFIG_ACPI +static const struct acpi_device_id aic31xx_acpi_match[] = { + {"10TI3100" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (acpi, aic31xx_acpi_match); +#endif +static struct i2c_driver aic31xx_i2c_driver = { .driver = { .name ="tlv320aic31xx-codec" , .of_match_table =of_match_ptr (tlv320aic31xx_of_match), + .acpi_match_table =ACPI_PTR (aic31xx_acpi_match), }, .probe = aic31xx_i2c_probe, .remove = aic31xx_i2c_remove,
Signature · 1 line
2.8.1