Skip to contentSkip to conversation

Blinking display with 4.6-rc*

BUG Steinar H. Gunderson 2 participants 3 messages Apr 23, 2016 – Apr 25, 2016

lore
Share & tools
lore
#0 lore raw

Hi,

I have a Lenovo X240, which has Haswell integrated graphics. On upgrade from 4.5.0 to 4.6-rc1, I noticed an extremely irritating issue; about every minute, the display shows black for a brief moment (perhaps one or two frames), then reverts back to the correct display. There are no other ill effects that I can see, in particular nothing in dmesg. I tried with 4.6-rc4, and it has the same issue.

Do I need to run a full bisect to figure out what's causing this, or does it ring a bell with someone?

/* Steinar */

Signature · 5 lines
Homepage: https://www.sesse.net/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 9 lines · Steinar H. Gunderson

I have a Lenovo X240, which has Haswell integrated graphics. On upgrade from 4.5.0 to 4.6-rc1, I noticed an extremely irritating issue; about every minute, the display shows black for a brief moment (perhaps one or two frames), then reverts back to the correct display. There are no other ill effects that I can see, in particular nothing in dmesg. I tried with 4.6-rc4, and it has the same issue.

Do I need to run a full bisect to figure out what's causing this, or does it ring a bell with someone?

Please file a bug at [1]. Please add drm.debug=14 module parameter and attach dmesg to the bug, all the way from boot to exhibiting the problem.

You might also want to give drm-intel-nightly branch of [2] a try.

BR,
Jani.

[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
[2] http://cgit.freedesktop.org/drm-intel

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
Quoted 3 lines · Jani Nikula

Please file a bug at [1]. Please add drm.debug=14 module parameter and attach dmesg to the bug, all the way from boot to exhibiting the problem.

Done, thanks.

https://bugs.freedesktop.org/show_bug.cgi?id=95124

/* Steinar */

Signature · 5 lines
Homepage: https://www.sesse.net/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx