ARM: dts: imx6ul: Fix operating points
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/2 ARM: dts: imx6ul: Fix operating points
From: Fabio Estevam <[email protected]>
Adjust the VDD_ARM_CAP and VDD_SOC_CAP voltages according to Table-11 from MX6UL datasheet:
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6ULCEC.pdf
(a 25mV offset is added to the minimum allowed values for safety).
--- arch/arm/boot/dts/imx6ul.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx6ul.dtsi +6 -6
@@ -55,15 +55,15 @@ clock-latency = <61036>; /* two CLK32 periods */ operating-points = < /* kHz uV */ - 528000 1250000 - 396000 1150000 - 198000 1150000 + 528000 1175000 + 396000 1025000 + 198000 950000 >; fsl,soc-operating-points = < /* KHz uV */ - 528000 1250000 - 396000 1150000 - 198000 1150000 + 528000 1175000 + 396000 1175000 + 198000 1175000 >; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>,
Signature · 1 line
1.9.1
Fabio Estevam
reviewerPATCH 2/2 ARM: dts: imx6sx: Add 198MHz operating point
From: Fabio Estevam <[email protected]>
198MHz is a valid operating point for mx6sx.
Add entries for VDD_ARM_CAP and VDD_SOC_CAP voltages for 198MHz according to the imx6sx datahseet:
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SXIEC.pdf
(a 25mV offset is added to the minimum allowed values for safety).
These values also match the ones from the NXP kernel.
--- arch/arm/boot/dts/imx6sx.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx6sx.dtsi +2 -0
@@ -63,12 +63,14 @@ 996000 1250000 792000 1175000 396000 1075000 + 198000 975000 >; fsl,soc-operating-points = < /* ARM kHz SOC uV */ 996000 1175000 792000 1175000 396000 1175000 + 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX6SX_CLK_ARM>,
Signature · 1 line
1.9.1
Shawn Guo
AppliedPATCH 1/2 ARM: dts: imx6ul: Fix operating points
In reply to Fabio EstevamQuoted 9 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Adjust the
VDD_ARM_CAPandVDD_SOC_CAPvoltages according to Table-11 from MX6UL datasheet:
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6ULCEC.pdf(a 25mV offset is added to the minimum allowed values for safety).
Signed-off-by Fabio Estevam <[email protected]>
Applied both, thanks.