Skip to contentSkip to conversation

clk: mvebu: clock drivers for Marvell Armada 7K/8K

PATCH Superseded Thomas Petazzoni 3 participants 10 messages Apr 14, 2016 – May 7, 2016

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v5 cover clk: mvebu: clock drivers for Marvell Armada 7K/8K

Hello,

Here is the fifth version of the clock drivers for Armada 7K/8K. The first two patches have already been applied by Stephen Boyd, but I'm still including them for completeness.

Changes since v4:

- Remove the gatable-clock-indices from the CP110 driver, use "none" when a given bit does not provide a clock. Suggested by Rob Herring.

- Update the gatable clock tree with the latest technical information received.

- Turn the clock drivers into proper platform drivers. Suggested by Stephen Boyd.

- Remove useless headers include from the clock drivers. Suggested by Stephen Boyd.

- Add proper handling in the clock driver ->probe() function.

Thanks!

Thomas

Thomas Petazzoni (5):
clk: unconditionally recurse into clk/mvebu/
dt-bindings: arm: add DT binding for Marvell AP806 system controller
clk: mvebu: new driver for Armada AP806 system controller
dt-bindings: arm: add DT binding for Marvell CP110 system controller
clk: mvebu: new driver for Armada CP110 system controller

 .../arm/marvell/ap806-system-controller.txt        |  35 ++
 .../arm/marvell/cp110-system-controller0.txt       |  83 +++++
 drivers/clk/Makefile                               |   2 +-
 drivers/clk/mvebu/Kconfig                          |   6 +
 drivers/clk/mvebu/Makefile                         |   2 +
 drivers/clk/mvebu/ap806-system-controller.c        | 168 +++++++++
 drivers/clk/mvebu/cp110-system-controller.c        | 399 +++++++++++++++++++++
 7 files changed, 694 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
 create mode 100644 drivers/clk/mvebu/ap806-system-controller.c
 create mode 100644 drivers/clk/mvebu/cp110-system-controller.c
Signature · 1 line
2.6.4
#1 lore raw

PATCH v5 1/5 clk: unconditionally recurse into clk/mvebu/

The drivers/clk/mvebu directory is only being built when CONFIG_PLAT_ORION=y. As we are going to support additional mvebu platforms in drivers/clk/mvebu, which don't have CONFIG_PLAT_ORION=y, we need to recurse into this directory regardless of the value of CONFIG_PLAT_ORION.

Since all files in drivers/clk/mvebu/ are already conditionally compiled depending on various Kconfig options, we can recurse unconditionally into drivers/clk/mvebu without any other change.

---
 drivers/clk/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/Makefile +1 -1
index 46869d69..f9ad66e 100644
@@ -61,7 +61,7 @@ obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)			+= mmp/
 endif
-obj-$(CONFIG_PLAT_ORION)		+= mvebu/
+obj-y					+= mvebu/
 obj-$(CONFIG_ARCH_MESON)		+= meson/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
 obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/
Signature · 1 line
2.6.4
#2 lore raw

PATCH v5 2/5 dt-bindings: arm: add DT binding for Marvell AP806 system controller

In reply to Thomas Petazzoni

This commit adds the Device Tree binding documentation for the system controller found in Marvell AP806 HW block, which is one of the core HW blocks of the 64-bits Marvell Armada 7K/8K family.

---
 .../arm/marvell/ap806-system-controller.txt        | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt new file +35 -0
new file mode 100644
index 0000000..8968371
@@ -0,0 +1,35 @@
+Marvell Armada AP806 System Controller
+======================================
+
+The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K
+SoCs. It contains a system controller, which provides a number
+registers giving access to numerous features: clocks, pin-muxing and
+many other SoC configuration items. This DT binding allows to describe
+this system controller.
+
+The Device Tree node representing the AP806 system controller provides
+a number of clocks:
+
+ - 0: clock of CPU cluster 0
+ - 1: clock of CPU cluster 1
+ - 2: fixed PLL at 1200 Mhz
+ - 3: MSS clock, derived from the fixed PLL
+
+Required properties:
+
+ - compatible: must be:
+     "marvell,ap806-system-controller", "syscon"
+ - reg: register area of the AP806 system controller
+ - #clock-cells: must be set to 1
+ - clock-output-names: must be defined to:
+    "ap-cpu-cluster-0", "ap-cpu-cluster-1", "ap-fixed", "ap-mss"
+
+Example:
+
+	syscon: system-controller at 6f4000 {
+		compatible = "marvell,ap806-system-controller", "syscon";
+		#clock-cells = <1>;
+		clock-output-names = "ap-cpu-cluster-0", "ap-cpu-cluster-1",
+				     "ap-fixed", "ap-mss";
+		reg = <0x6f4000 0x1000>;
+	};
Signature · 1 line
2.6.4
#3 lore raw

PATCH v5 3/5 clk: mvebu: new driver for Armada AP806 system controller

In reply to Thomas Petazzoni

The Armada AP806 system controller, amongst other things, provides a number of clocks for the platform: the CPU cluster clocks, whose frequencies are found by reading the Sample At Reset register, one fixed clock, and another clock derived from the fixed clock, which is the one used by most peripherals in AP806.

The AP806 is one of the two core HW blocks used in the Marvell 7K/8K SoCs.

---
 drivers/clk/mvebu/Kconfig                   |   3 +
 drivers/clk/mvebu/Makefile                  |   1 +
 drivers/clk/mvebu/ap806-system-controller.c | 168 ++++++++++++++++++++++++++++
 3 files changed, 172 insertions(+)
 create mode 100644 drivers/clk/mvebu/ap806-system-controller.c
drivers/clk/mvebu/Kconfig +3 -0
index eaee8f0..bf7ae00 100644
@@ -29,6 +29,9 @@ config ARMADA_XP_CLK
 	select MVEBU_CLK_COMMON
 	select MVEBU_CLK_CPU
 
+config ARMADA_AP806_SYSCON
+	bool
+
 config DOVE_CLK
 	bool
 	select MVEBU_CLK_COMMON
drivers/clk/mvebu/Makefile +1 -0
index 8866115..f4aa481 100644
@@ -7,6 +7,7 @@ obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
 obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
 obj-$(CONFIG_ARMADA_39X_CLK)	+= armada-39x.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o
+obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o dove-divider.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
 obj-$(CONFIG_ORION_CLK)		+= orion.o
drivers/clk/mvebu/ap806-system-controller.c new file +168 -0

168 lines not on this page · raw message

Signature · 1 line
2.6.4
#4 lore raw

PATCH v5 4/5 dt-bindings: arm: add DT binding for Marvell CP110 system controller

In reply to Thomas Petazzoni

This commit adds the DT binding documentation for the Marvell CP110 system controller, which is part of the CP110 HW block, itself used in the Marvell Armada 7K and 8K SoCs.

---
 .../arm/marvell/cp110-system-controller0.txt       | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt new file +83 -0
new file mode 100644
index 0000000..30c5469
@@ -0,0 +1,83 @@
+Marvell Armada CP110 System Controller 0
+========================================
+
+The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
+SoCs. It contains two sets of system control registers, System
+Controller 0 and System Controller 1. This Device Tree binding allows
+to describe the first system controller, which provides registers to
+configure various aspects of the SoC.
+
+The Device Tree node representing this System Controller 0 provides a
+number of clocks:
+
+ - a set of core clocks
+ - a set of gatable clocks
+
+Those clocks can be referenced by other Device Tree nodes using two
+cells:
+ - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
+   gatable clocks.
+ - The second cell identifies the particular core clock or gatable
+   clocks.
+
+The following clocks are available:
+ - Core clocks
+   - 0 0	APLL
+   - 0 1	PPv2 core
+   - 0 2	EIP
+   - 0 3	Core
+   - 0 4	NAND core
+ - Gatable clocks
+   - 1 0	Audio
+   - 1 1	Comm Unit
+   - 1 2	NAND
+   - 1 3	PPv2
+   - 1 4	SDIO
+   - 1 5	MG Domain
+   - 1 6	MG Core
+   - 1 7	XOR1
+   - 1 8	XOR0
+   - 1 9	GOP DP
+   - 1 11	PCIe x1 0
+   - 1 12	PCIe x1 1
+   - 1 13	PCIe x4
+   - 1 14	PCIe / XOR
+   - 1 15	SATA
+   - 1 16	SATA USB
+   - 1 17	Main
+   - 1 18	SD/MMC
+   - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
+   - 1 22	USB3H0
+   - 1 23	USB3H1
+   - 1 24	USB3 Device
+   - 1 25	EIP150
+   - 1 26	EIP197
+
+Required properties:
+
+ - compatible: must be:
+     "marvell,cp110-system-controller0", "syscon";
+ - reg: register area of the CP110 system controller 0
+ - #clock-cells: must be set to 2
+ - core-clock-output-names must be set to:
+	"cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"
+ - gate-clock-output-names must be set to:
+	"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
+	"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
+	"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
+	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+	"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+
+Example:
+
+	cpm_syscon0: system-controller at 440000 {
+		compatible = "marvell,cp110-system-controller0", "syscon";
+		reg = <0x440000 0x1000>;
+		#clock-cells = <2>;
+		core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core";
+		gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
+			"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
+			"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
+			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+			"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+	};
Signature · 1 line
2.6.4
maintainer
#5 lore raw

PATCH v5 4/5 dt-bindings: arm: add DT binding for Marvell CP110 system controller

Quoted 9 lines · Thomas Petazzoni

This commit adds the DT binding documentation for the Marvell CP110 system controller, which is part of the CP110 HW block, itself used in the Marvell Armada 7K and 8K SoCs.

---
 .../arm/marvell/cp110-system-controller0.txt       | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
#6 lore raw

PATCH v5 5/5 clk: mvebu: new driver for Armada CP110 system controller

In reply to Thomas Petazzoni

The Armada CP110 system controller provides, amongst other things, a number of clocks for the platform: a small number of core clocks, and then a number of gatable clocks, derived from some of the core clocks. Those clocks are configured via registers of the CP110 System Controller.

The CP110 is the other core HW block (next to the AP806) used in the Marvel Armada 7K and 8K SoCs.

---
 drivers/clk/mvebu/Kconfig                   |   3 +
 drivers/clk/mvebu/Makefile                  |   1 +
 drivers/clk/mvebu/cp110-system-controller.c | 399 ++++++++++++++++++++++++++++
 3 files changed, 403 insertions(+)
 create mode 100644 drivers/clk/mvebu/cp110-system-controller.c
drivers/clk/mvebu/Kconfig +3 -0
index bf7ae00..3165da7 100644
@@ -32,6 +32,9 @@ config ARMADA_XP_CLK
 config ARMADA_AP806_SYSCON
 	bool
 
+config ARMADA_CP110_SYSCON
+	bool
+
 config DOVE_CLK
 	bool
 	select MVEBU_CLK_COMMON
drivers/clk/mvebu/Makefile +1 -0
index f4aa481..7172ef6 100644
@@ -8,6 +8,7 @@ obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
 obj-$(CONFIG_ARMADA_39X_CLK)	+= armada-39x.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o
 obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
+obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o dove-divider.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
 obj-$(CONFIG_ORION_CLK)		+= orion.o
drivers/clk/mvebu/cp110-system-controller.c new file +399 -0

399 lines not on this page · raw message

Signature · 1 line
2.6.4
#7 lore raw

v5 cover clk: mvebu: clock drivers for Marvell Armada 7K/8K

In reply to Thomas Petazzoni

Stephen, Michael,

Quoted 3 lines · Thomas Petazzoni

clk: mvebu: new driver for Armada AP806 system controller
dt-bindings: arm: add DT binding for Marvell CP110 system controller
clk: mvebu: new driver for Armada CP110 system controller

Do you have any comments on those three patches? Rob Herring gave his Acked-by on the DT binding for both drivers and as you can imagine, those drivers are essential to making this new platform work in mainline.

Do not hesitate to let me know if anything still needs some adaptations/changes in the clock drivers.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#8 lore raw

v5 cover clk: mvebu: clock drivers for Marvell Armada 7K/8K

In reply to Thomas Petazzoni
Quoted 15 lines · Thomas Petazzoni

Hello,

Here is the fifth version of the clock drivers for Armada 7K/8K. The first two patches have already been applied by Stephen Boyd, but I'm still including them for completeness.

Changes since v4:

- Remove the gatable-clock-indices from the CP110 driver, use "none" when a given bit does not provide a clock. Suggested by Rob Herring.

- Update the gatable clock tree with the latest technical information received.

Quoted 8 lines

- Turn the clock drivers into proper platform drivers. Suggested by Stephen Boyd.

- Remove useless headers include from the clock drivers. Suggested by Stephen Boyd.

- Add proper handling in the clock driver ->probe() function.

Applied the last three with this squashed in to shut up checkpatch.

---8<---

drivers/clk/mvebu/ap806-system-controller.c +6 -6
index ac9201c7c730..02023baf86c9 100644
@@ -23,7 +23,7 @@
 #define AP806_SAR_REG			0x400
 #define AP806_SAR_CLKFREQ_MODE_MASK	0x1f
 
-#define AP806_CLK_NUM 			4
+#define AP806_CLK_NUM			4
 
 static struct clk *ap806_clks[AP806_CLK_NUM];
 
@@ -54,7 +54,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
 	}
 
 	freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK;
-	switch(freq_mode) {
+	switch (freq_mode) {
 	case 0x0 ... 0x5:
 		cpuclk_freq = 2000;
 		break;
@@ -100,8 +100,8 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
 	/* Fixed clock is always 1200 Mhz */
 	of_property_read_string_index(np, "clock-output-names",
 				      2, &fixedclk_name);
-	ap806_clks[2] = clk_register_fixed_rate(&pdev->dev, fixedclk_name, NULL, 0,
-						1200 * 1000 * 1000);
+	ap806_clks[2] = clk_register_fixed_rate(&pdev->dev, fixedclk_name, NULL,
+						0, 1200 * 1000 * 1000);
 	if (IS_ERR(ap806_clks[2])) {
 		ret = PTR_ERR(ap806_clks[2]);
 		goto fail2;
@@ -147,8 +147,8 @@ static int ap806_syscon_clk_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ap806_syscon_of_match[] = {
-        { .compatible = "marvell,ap806-system-controller", },
-        {},
+	{ .compatible = "marvell,ap806-system-controller", },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, armada8k_pcie_of_match);
 
drivers/clk/mvebu/cp110-system-controller.c +21 -14
index f45e7cabd811..f1f41443e466 100644
@@ -109,6 +109,7 @@ static int cp110_gate_enable(struct clk_hw *hw)
 static void cp110_gate_disable(struct clk_hw *hw)
 {
 	struct cp110_gate_clk *gate = to_cp110_gate_clk(hw);
+
 	regmap_update_bits(gate->regmap, CP110_PM_CLOCK_GATING_REG,
 			   BIT(gate->bit_idx), 0);
 }
@@ -129,7 +130,8 @@ static const struct clk_ops cp110_gate_ops = {
 	.is_enabled = cp110_gate_is_enabled,
 };
 
-static struct clk *cp110_register_gate(const char *name, const char *parent_name,
+static struct clk *cp110_register_gate(const char *name,
+				       const char *parent_name,
 				       struct regmap *regmap, u8 bit_idx)
 {
 	struct cp110_gate_clk *gate;
@@ -205,10 +207,10 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-        /* Register the APLL which is the root of the clk tree */
+	/* Register the APLL which is the root of the clk tree */
 	of_property_read_string_index(np, "core-clock-output-names",
                                       CP110_CORE_APLL, &apll_name);
-        clk = clk_register_fixed_rate(NULL, apll_name, NULL, 0,
+	clk = clk_register_fixed_rate(NULL, apll_name, NULL, 0,
 				      1000 * 1000 * 1000);
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
@@ -217,7 +219,7 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 
 	cp110_clks[CP110_CORE_APLL] = clk;
 
-        /* PPv2 is APLL/3 */
+	/* PPv2 is APLL/3 */
 	of_property_read_string_index(np, "core-clock-output-names",
 				      CP110_CORE_PPV2, &ppv2_name);
 	clk = clk_register_fixed_factor(NULL, ppv2_name, apll_name, 0, 1, 3);
@@ -228,7 +230,7 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 
 	cp110_clks[CP110_CORE_PPV2] = clk;
 
-        /* EIP clock is APLL/2 */
+	/* EIP clock is APLL/2 */
 	of_property_read_string_index(np, "core-clock-output-names",
 				      CP110_CORE_EIP, &eip_name);
 	clk = clk_register_fixed_factor(NULL, eip_name, apll_name, 0, 1, 2);
@@ -239,7 +241,7 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 
 	cp110_clks[CP110_CORE_EIP] = clk;
 
-        /* Core clock is EIP/2 */
+	/* Core clock is EIP/2 */
 	of_property_read_string_index(np, "core-clock-output-names",
 				      CP110_CORE_CORE, &core_name);
 	clk = clk_register_fixed_factor(NULL, core_name, eip_name, 0, 1, 2);
@@ -270,7 +272,8 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 		const char *parent, *name;
 		int ret;
 
-		ret = of_property_read_string_index(np, "gate-clock-output-names",
+		ret = of_property_read_string_index(np,
+						    "gate-clock-output-names",
 						    i, &name);
 		/* Reached the end of the list? */
 		if (ret < 0)
@@ -279,13 +282,14 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 		if (!strcmp(name, "none"))
 			continue;
 
-		switch(i) {
+		switch (i) {
 		case CP110_GATE_AUDIO:
 		case CP110_GATE_COMM_UNIT:
 		case CP110_GATE_EIP150:
 		case CP110_GATE_EIP197:
 		case CP110_GATE_SLOW_IO:
-			of_property_read_string_index(np, "gate-clock-output-names",
+			of_property_read_string_index(np,
+						      "gate-clock-output-names",
 						      CP110_GATE_MAIN, &parent);
 			break;
 		case CP110_GATE_NAND:
@@ -295,7 +299,8 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 			parent = ppv2_name;
 			break;
 		case CP110_GATE_SDIO:
-			of_property_read_string_index(np, "gate-clock-output-names",
+			of_property_read_string_index(np,
+						      "gate-clock-output-names",
 						      CP110_GATE_SDMMC, &parent);
 			break;
 		case CP110_GATE_XOR1:
@@ -303,14 +308,16 @@ static int cp110_syscon_clk_probe(struct platform_device *pdev)
 		case CP110_GATE_PCIE_X1_0:
 		case CP110_GATE_PCIE_X1_1:
 		case CP110_GATE_PCIE_X4:
-			of_property_read_string_index(np, "gate-clock-output-names",
+			of_property_read_string_index(np,
+						      "gate-clock-output-names",
 						      CP110_GATE_PCIE_XOR, &parent);
 			break;
 		case CP110_GATE_SATA:
 		case CP110_GATE_USB3H0:
 		case CP110_GATE_USB3H1:
 		case CP110_GATE_USB3DEV:
-			of_property_read_string_index(np, "gate-clock-output-names",
+			of_property_read_string_index(np,
+						      "gate-clock-output-names",
 						      CP110_GATE_SATA_USB, &parent);
 			break;
 		default:
@@ -378,8 +385,8 @@ static int cp110_syscon_clk_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id cp110_syscon_of_match[] = {
-        { .compatible = "marvell,cp110-system-controller0", },
-        {},
+	{ .compatible = "marvell,cp110-system-controller0", },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, armada8k_pcie_of_match);
 
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
#9 lore raw

v5 cover clk: mvebu: clock drivers for Marvell Armada 7K/8K

Hello,

Quoted 2 lines · Stephen Boyd

Applied the last three with this squashed in to shut up checkpatch.

Thanks a lot, it all looks good!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com