Skip to contentSkip to conversation

Linux 4.5.6

DISCUSSION Greg KH 1 participant 2 messages Jun 1, 2016 Stable branch

lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

I'm announcing the release of the 4.5.6 kernel.

All users of the 4.5 kernel series must upgrade.

The updated 4.5.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.5.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Documentation/serial/tty.txt                 |    3 
 Makefile                                     |    7 -
 arch/arm/kvm/mmu.c                           |   17 +-
 arch/arm64/include/asm/pgtable-hwdef.h       |    1 
 arch/arm64/include/asm/pgtable.h             |   25 +++-
 arch/arm64/kernel/cpuinfo.c                  |    3 
 arch/arm64/kvm/inject_fault.c                |    2 
 arch/arm64/mm/fault.c                        |   50 ++++++++
 arch/mips/include/asm/kvm_host.h             |    2 
 arch/mips/kvm/emulate.c                      |   89 ++++++++-------
 arch/mips/kvm/trap_emul.c                    |    2 
 arch/x86/kernel/cpu/perf_event_intel_pt.c    |    2 
 arch/x86/kvm/cpuid.c                         |    1 
 arch/x86/kvm/mtrr.c                          |    2 
 arch/x86/kvm/vmx.c                           |    2 
 arch/x86/pci/xen.c                           |    7 -
 drivers/acpi/device_pm.c                     |    1 
 drivers/acpi/osl.c                           |   16 +-
 drivers/bluetooth/hci_vhci.c                 |   28 +++-
 drivers/clk/bcm/clk-bcm2835.c                |    4 
 drivers/clk/qcom/gcc-msm8916.c               |    2 
 drivers/crypto/caam/jr.c                     |    2 
 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c    |   10 +
 drivers/crypto/talitos.c                     |   64 +++++++++++
 drivers/infiniband/ulp/srp/ib_srp.c          |    2 
 drivers/input/misc/pwm-beeper.c              |   69 ++++++++----
 drivers/irqchip/irq-gic-v3.c                 |   19 +++
 drivers/irqchip/irq-gic.c                    |    8 +
 drivers/mcb/mcb-parse.c                      |    2 
 drivers/mfd/omap-usb-tll.c                   |   13 +-
 drivers/misc/mei/amthif.c                    |    4 
 drivers/misc/mei/bus.c                       |   15 ++
 drivers/misc/mei/client.c                    |    4 
 drivers/misc/mei/hbm.c                       |    3 
 drivers/misc/mei/interrupt.c                 |    6 -
 drivers/misc/mei/mei_dev.h                   |    2 
 drivers/mmc/card/block.c                     |    5 
 drivers/mmc/core/core.c                      |    4 
 drivers/mmc/core/mmc.c                       |    7 +
 drivers/mmc/host/sdhci-acpi.c                |   13 +-
 drivers/mmc/host/sdhci-pci-core.c            |    5 
 drivers/mtd/ubi/eba.c                        |   21 +++
 drivers/mtd/ubi/fastmap.c                    |    1 
 drivers/mtd/ubi/ubi.h                        |    2 
 drivers/net/can/dev.c                        |   56 +++++++++
 drivers/net/can/m_can/m_can.c                |    2 
 drivers/net/usb/asix_common.c                |    2 
 drivers/nfc/st21nfca/i2c.c                   |    6 -
 drivers/platform/x86/dell-rbtn.c             |   56 +++++++++
 drivers/scsi/scsi_scan.c                     |    1 
 drivers/scsi/scsi_sysfs.c                    |    6 -
 drivers/staging/comedi/drivers/das1800.c     |   22 ++-
 drivers/thunderbolt/eeprom.c                 |    1 
 drivers/tty/n_gsm.c                          |    4 
 drivers/tty/n_hdlc.c                         |    4 
 drivers/tty/n_tty.c                          |   70 +++++-------
 drivers/tty/pty.c                            |    4 
 drivers/tty/serial/8250/8250_mid.c           |   35 +++---
 drivers/tty/serial/8250/8250_pci.c           |    3 
 drivers/tty/serial/atmel_serial.c            |   14 ++
 drivers/tty/serial/samsung.c                 |    4 
 drivers/tty/tty_buffer.c                     |   34 +----
 drivers/tty/vt/vt.c                          |    5 
 drivers/usb/core/driver.c                    |   40 ++++--
 drivers/usb/gadget/function/f_fs.c           |    2 
 drivers/usb/gadget/function/f_mass_storage.c |   36 ++----
 drivers/usb/gadget/function/f_mass_storage.h |    2 
 drivers/usb/gadget/legacy/acm_ms.c           |    4 
 drivers/usb/gadget/legacy/mass_storage.c     |    4 
 drivers/usb/gadget/legacy/multi.c            |   12 --
 drivers/usb/gadget/legacy/nokia.c            |    7 -
 drivers/usb/gadget/udc/udc-core.c            |    2 
 drivers/usb/misc/usbtest.c                   |    4 
 drivers/usb/serial/io_edgeport.c             |   56 ++++++---
 drivers/usb/serial/keyspan.c                 |    4 
 drivers/usb/serial/mxuport.c                 |   10 +
 drivers/usb/serial/option.c                  |  155 +++++++++++++++++++++++++--
 drivers/usb/serial/quatech2.c                |    1 
 drivers/watchdog/sp5100_tco.c                |   15 +-
 fs/cifs/sess.c                               |  139 +++++++++++++-----------
 fs/cifs/smb2glob.h                           |    1 
 fs/cifs/smb2inode.c                          |    8 +
 fs/cifs/smb2pdu.c                            |   16 ++
 fs/cifs/smb2proto.h                          |    2 
 fs/hpfs/super.c                              |   42 +++++--
 include/asm-generic/qspinlock.h              |   27 ++++
 include/asm-generic/siginfo.h                |   15 --
 include/linux/can/dev.h                      |   22 +++
 include/linux/signal.h                       |   15 ++
 include/linux/tty.h                          |    2 
 include/linux/usb.h                          |    2 
 include/scsi/scsi_device.h                   |    1 
 kernel/events/core.c                         |   52 ++++++---
 kernel/sched/loadavg.c                       |   11 +
 kernel/trace/ring_buffer.c                   |   35 +++---
 scripts/Makefile.extrawarn                   |    1 
 sound/pci/hda/patch_realtek.c                |   31 +++++
 97 files changed, 1179 insertions(+), 473 deletions(-)

Adrian Hunter (4):
mmc: mmc: Fix partition switch timeout for some eMMCs
mmc: sdhci-acpi: Ensure connected devices are powered when probing
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers

Alan Stern (1):
USB: leave LPM alone if possible when binding/unbinding interface drivers

Alexander Shishkin (1):
perf/x86/intel/pt: Generate PMI in the STOP region as well

Alexander Usyskin (3):
mei: fix NULL dereferencing during FW initiated disconnection
mei: amthif: discard not read messages
mei: bus: call mei_cl_read_start under device lock

Alexandre Belloni (1):
tty/serial: atmel: fix hardware handshake selection

Andreas Noever (1):
thunderbolt: Fix double free of drom buffer

Andreas Werner (1):
mcb: Fixed bar number assignment for the gdd

Andy Gross (1):
clk: qcom: msm8916: Fix crypto clock flags

Andy Honig (1):

      KVM: MTRR: remove MSR 0x2f8

Andy Shevchenko (2):
serial: 8250_mid: use proper bar for DNV platform
serial: 8250_mid: recognize interrupt source in handler

Arnd Bergmann (1):
kbuild: move -Wunused-const-variable to W=1 warning level

Bart Van Assche (1):
IB/srp: Fix a debug kernel crash

Brian Bloniarz (1):
Fix OpenSSH pty regression on close

Bruce Rogers (1):
KVM: x86: fix ordering of cr0 initialization code in vmx_cpu_reset

Catalin Marinas (4):
arm64: Fix typo in the pmdp_huge_get_and_clear() definition
arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
arm64: Implement ptep_set_access_flags() for hardware AF/DBM
arm64: Implement pmdp_set_access_flags() for hardware AF/DBM

Catalin Vasile (1):
crypto: caam - fix caam_jr_alloc() ret code

Chanwoo Choi (1):
serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

Christophe Ricard (1):
nfc: st21nfca: Fix static checker warning

Corentin LABBE (1):

      crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}

David Müller (1):
serial: 8250_pci: fix divide error bug if baud rate is 0

Gabriele Mazzotta (1):
dell-rbtn: Ignore ACPI notifications if device is suspended

Greg Kroah-Hartman (1):

      Linux 4.5.6

H Hartley Sweeten (1):
staging: comedi: das1800: fix possible NULL dereference

Horia Geant? (1):
crypto: talitos - fix ahash algorithms registration

Hui Wang (1):
ALSA: hda - Fix headset mic detection problem for one Dell machine

James Hogan (3):
MIPS: KVM: Fix timer IRQ race when freezing timer
MIPS: KVM: Fix timer IRQ race when writing CP0_Compare
SIGNAL: Move generic copy_siginfo() to signal.h

Jiri Slaby (4):
Bluetooth: vhci: fix open_timeout vs. hdev race
Bluetooth: vhci: purge unhandled skbs
tty: vt, return error when con_startup fails
TTY: n_gsm, fix false positive WARN_ON

Johan Hovold (5):
USB: serial: mxuport: fix use-after-free in probe error path
USB: serial: keyspan: fix use-after-free in probe error path
USB: serial: quatech2: fix use-after-free in probe error path
USB: serial: io_edgeport: fix memory leaks in attach error path
USB: serial: io_edgeport: fix memory leaks in probe error path

Johannes Thumshirn (2):
scsi: Add intermediate STARGET_REMOVE state to scsi_target_state Revert "scsi: fix soft lockup in scsi_remove_target() on module removal"

John Stultz (1):
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions

Julien Grall (1):
arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str

Kai-Heng Feng (1):
ALSA: hda - Fix headphone noise on Dell XPS 13 9360

Kailang Yang (2):
ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294
ALSA: hda/realtek - Add support for ALC295/ALC3254

Lars-Peter Clausen (1):
usb: gadget: f_fs: Fix EFAULT generation for async read operations

Lei Liu (1):
USB: serial: option: add even more ZTE device ids

Lucas Stach (1):
watchdog: sp5100_tco: properly check for new register layouts

Lv Zheng (1):
ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings

Manfred Schlaegl (1):
Input: pwm-beeper - fix - scheduling while atomic

Marc Zyngier (2):
arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables irqchip/gic-v3: Configure all interrupts as non-secure Group-1

Martin Sperl (1):
clk: bcm2835: add locking to pll*_on/off methods

Mathias Nyman (1):
usb: misc: usbtest: fix pattern tests for scatterlists.

Matt Evans (1):
kvm: arm64: Fix EC field in inject_abt64

Matt Gumbel (1):
mmc: longer timeout for long read time quirk

Michal Nazarewicz (1):
usb: f_mass_storage: test whether thread is running before starting another

Mikulas Patocka (2):
hpfs: fix remount failure when there are no options changed
hpfs: implement the show_options method

Oliver Hartkopp (1):
can: fix handling of unmodifiable configuration options

Paolo Bonzini (1):

      KVM: x86: mask CPUID(0xD,0x1).EAX against host value

Peter Zijlstra (2):
perf/core: Fix perf_event_open() vs. execve() race locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()

Richard Weinberger (1):
UBI: Fix static volume checks when Fastmap is used

Roger Quadros (1):
mfd: omap-usb-tll: Fix scheduling while atomic BUG

Schemmel Hans-Christoph (1):
USB: serial: option: add support for Cinterion PH8 and AHxx

Stefan Metzmacher (4):
fs/cifs: correctly to anonymous authentication via NTLMSSP fs/cifs: correctly to anonymous authentication for the LANMAN authentication fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication

Stefano Stabellini (1):
xen/x86: actually allocate legacy interrupts on PV guests

Steve French (1):
remove directory incorrectly tries to set delete on close on non-empty directories

Steven Rostedt (Red Hat) (2):
ring-buffer: Use long for nr_pages to avoid overflow failures
ring-buffer: Prevent overflow of size in ring_buffer_resize()

Takashi Iwai (1):
Bluetooth: vhci: Fix race at creating hci device

Ulf Hansson (1):
ACPI / PM: Export acpi_device_fix_up_power()

Vik Heyndrickx (1):
sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems

Will Deacon (1):
irqchip/gic: Ensure ordering between read of INTACK and shared data

Yoshihiro Shimoda (1):
usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request()

lei liu (1):
USB: serial: option: add more ZTE device ids

author maintainer
#1 lore raw
Documentation/serial/tty.txt +0 -3
index bc3842dc323a..e2dea3dc4307 100644
@@ -213,9 +213,6 @@ TTY_IO_ERROR		If set, causes all subsequent userspace read/write
 
 TTY_OTHER_CLOSED	Device is a pty and the other side has closed.
 
-TTY_OTHER_DONE		Device is a pty and the other side has closed and
-			all pending input processing has been completed.
-
 TTY_NO_WRITE_SPLIT	Prevent driver from splitting up writes into
 			smaller chunks.
 
Makefile +4 -3
index a23df411d393..07a1786f695a 100644
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 5
-SUBLEVEL = 5
+SUBLEVEL = 6
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 
@@ -688,9 +688,10 @@ KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
 else
 
-# This warning generated too much noise in a regular build.
-# Use make W=1 to enable this warning (see scripts/Makefile.build)
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.build)
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 endif
 
 ifdef CONFIG_FRAME_POINTER
arch/arm/kvm/mmu.c +11 -6
index aba61fd3697a..88323ffb1ee0 100644
@@ -886,11 +886,14 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
 	VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
 
 	old_pmd = *pmd;
-	kvm_set_pmd(pmd, *new_pmd);
-	if (pmd_present(old_pmd))
+	if (pmd_present(old_pmd)) {
+		pmd_clear(pmd);
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pmd));
+	}
+
+	kvm_set_pmd(pmd, *new_pmd);
 	return 0;
 }
 
@@ -939,12 +942,14 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 
 	/* Create 2nd stage page table mapping - Level 3 */
 	old_pte = *pte;
-	kvm_set_pte(pte, *new_pte);
-	if (pte_present(old_pte))
+	if (pte_present(old_pte)) {
+		kvm_set_pte(pte, __pte(0));
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pte));
+	}
 
+	kvm_set_pte(pte, *new_pte);
 	return 0;
 }
 
arch/arm64/include/asm/pgtable-hwdef.h +0 -1
index 5c25b831273d..9786f770088d 100644
@@ -133,7 +133,6 @@
  * Section
  */
 #define PMD_SECT_VALID		(_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE	(_AT(pmdval_t, 1) << 58)
 #define PMD_SECT_USER		(_AT(pmdval_t, 1) << 6)		/* AP[1] */
 #define PMD_SECT_RDONLY		(_AT(pmdval_t, 1) << 7)		/* AP[2] */
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
arch/arm64/include/asm/pgtable.h +20 -5
index 7273210782d5..137d3bf88e2a 100644
@@ -356,6 +356,7 @@ static inline pgprot_t mk_sect_prot(pgprot_t prot)
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
+#define pmd_present(pmd)	pte_present(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -364,7 +365,7 @@ static inline pgprot_t mk_sect_prot(pgprot_t prot)
 #define pmd_mkclean(pmd)       pte_pmd(pte_mkclean(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd)	(__pmd(pmd_val(pmd) & ~PMD_TYPE_MASK))
+#define pmd_mknotpresent(pmd)	(__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
 
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
@@ -403,7 +404,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				     unsigned long size, pgprot_t vma_prot);
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
 
 #define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
 
@@ -547,6 +547,21 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 }
 
 #ifdef CONFIG_ARM64_HW_AFDBM
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
+					unsigned long address, pmd_t *pmdp,
+					pmd_t entry, int dirty)
+{
+	return ptep_set_access_flags(vma, address, (pte_t *)pmdp, pmd_pte(entry), dirty);
+}
+#endif
+
 /*
  * Atomic pte/pmd modifications.
  */
@@ -599,9 +614,9 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define __HAVE_ARCH_PMDP_GET_AND_CLEAR
-static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
-				       unsigned long address, pmd_t *pmdp)
+#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
+static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
+					    unsigned long address, pmd_t *pmdp)
 {
 	return pte_pmd(ptep_get_and_clear(mm, address, (pte_t *)pmdp));
 }
arch/arm64/kernel/cpuinfo.c +2 -1
index 212ae6361d8b..a5f234039616 100644
@@ -85,7 +85,8 @@ static const char *const compat_hwcap_str[] = {
 	"idivt",
 	"vfpd32",
 	"lpae",
-	"evtstrm"
+	"evtstrm",
+	NULL
 };
 
 static const char *const compat_hwcap2_str[] = {
arch/arm64/kvm/inject_fault.c +1 -1
index 4d1ac81870d2..e9e0e6db73f6 100644
@@ -162,7 +162,7 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 		esr |= (ESR_ELx_EC_IABT_CUR << ESR_ELx_EC_SHIFT);
 
 	if (!is_iabt)
-		esr |= ESR_ELx_EC_DABT_LOW;
+		esr |= ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT;
 
 	vcpu_sys_reg(vcpu, ESR_EL1) = esr | ESR_ELx_FSC_EXTABT;
 }
arch/arm64/mm/fault.c +50 -0

56 lines not on this page · raw message

arch/mips/include/asm/kvm_host.h +1 -1
index f6b12790716c..942b8f6bf35b 100644
@@ -747,7 +747,7 @@ extern enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
 
 uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu);
 void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count);
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare);
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack);
 void kvm_mips_init_count(struct kvm_vcpu *vcpu);
 int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl);
 int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume);
arch/mips/kvm/emulate.c +50 -39

134 lines not on this page · raw message

arch/mips/kvm/trap_emul.c +1 -1
index ad988000563f..1664589d4746 100644
@@ -546,7 +546,7 @@ static int kvm_trap_emul_set_one_reg(struct kvm_vcpu *vcpu,
 		kvm_mips_write_count(vcpu, v);
 		break;
 	case KVM_REG_MIPS_CP0_COMPARE:
-		kvm_mips_write_compare(vcpu, v);
+		kvm_mips_write_compare(vcpu, v, false);
 		break;
 	case KVM_REG_MIPS_CP0_CAUSE:
 		/*
arch/x86/kernel/cpu/perf_event_intel_pt.c +2 -0
index c0bbd1033b7c..a5286d0bbb43 100644
@@ -695,6 +695,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
 
 	/* clear STOP and INT from current entry */
 	buf->topa_index[buf->stop_pos]->stop = 0;
+	buf->topa_index[buf->stop_pos]->intr = 0;
 	buf->topa_index[buf->intr_pos]->intr = 0;
 
 	/* how many pages till the STOP marker */
@@ -719,6 +720,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
 	buf->intr_pos = idx;
 
 	buf->topa_index[buf->stop_pos]->stop = 1;
+	buf->topa_index[buf->stop_pos]->intr = 1;
 	buf->topa_index[buf->intr_pos]->intr = 1;
 
 	return 0;
arch/x86/kvm/cpuid.c +1 -0
index 6525e926f566..2e1fd586b895 100644
@@ -509,6 +509,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			do_cpuid_1_ent(&entry[i], function, idx);
 			if (idx == 1) {
 				entry[i].eax &= kvm_supported_word10_x86_features;
+				cpuid_mask(&entry[i].eax, 10);
 				entry[i].ebx = 0;
 				if (entry[i].eax & (F(XSAVES)|F(XSAVEC)))
 					entry[i].ebx =
arch/x86/kvm/mtrr.c +0 -2
index 3f8c732117ec..c146f3c262c3 100644
@@ -44,8 +44,6 @@ static bool msr_mtrr_valid(unsigned msr)
 	case MSR_MTRRdefType:
 	case MSR_IA32_CR_PAT:
 		return true;
-	case 0x2f8:
-		return true;
 	}
 	return false;
 }
arch/x86/kvm/vmx.c +1 -1
index 539062e24de1..60946a5d3812 100644
@@ -5021,8 +5021,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 		vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
 
 	cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
-	vmx_set_cr0(vcpu, cr0); /* enter rmode */
 	vmx->vcpu.arch.cr0 = cr0;
+	vmx_set_cr0(vcpu, cr0); /* enter rmode */
 	vmx_set_cr4(vcpu, 0);
 	vmx_set_efer(vcpu, 0);
 	vmx_fpu_activate(vcpu);
arch/x86/pci/xen.c +5 -2
index beac4dfdade6..349b8ce92bf2 100644
@@ -491,8 +491,11 @@ int __init pci_xen_initial_domain(void)
 #endif
 	__acpi_register_gsi = acpi_register_gsi_xen;
 	__acpi_unregister_gsi = NULL;
-	/* Pre-allocate legacy irqs */
-	for (irq = 0; irq < nr_legacy_irqs(); irq++) {
+	/*
+	 * Pre-allocate the legacy IRQs.  Use NR_LEGACY_IRQS here
+	 * because we don't have a PIC and thus nr_legacy_irqs() is zero.
+	 */
+	for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
 		int trigger, polarity;
 
 		if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
drivers/acpi/device_pm.c +1 -0
index cd2c3d6d40e0..993fd31394c8 100644
@@ -319,6 +319,7 @@ int acpi_device_fix_up_power(struct acpi_device *device)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(acpi_device_fix_up_power);
 
 int acpi_device_update_power(struct acpi_device *device, int *state_p)
 {
drivers/acpi/osl.c +11 -5
index 67da6fb72274..c45fdc49ff28 100644
@@ -135,7 +135,7 @@ static struct osi_linux {
 	unsigned int	enable:1;
 	unsigned int	dmi:1;
 	unsigned int	cmdline:1;
-	unsigned int	default_disabling:1;
+	u8		default_disabling;
 } osi_linux = {0, 0, 0, 0};
 
 static u32 acpi_osi_handler(acpi_string interface, u32 supported)
@@ -1713,10 +1713,13 @@ void __init acpi_osi_setup(char *str)
 	if (*str == '!') {
 		str++;
 		if (*str == '\0') {
-			osi_linux.default_disabling = 1;
+			/* Do not override acpi_osi=!* */
+			if (!osi_linux.default_disabling)
+				osi_linux.default_disabling =
+					ACPI_DISABLE_ALL_VENDOR_STRINGS;
 			return;
 		} else if (*str == '*') {
-			acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS);
+			osi_linux.default_disabling = ACPI_DISABLE_ALL_STRINGS;
 			for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
 				osi = &osi_setup_entries[i];
 				osi->enable = false;
@@ -1789,10 +1792,13 @@ static void __init acpi_osi_setup_late(void)
 	acpi_status status;
 
 	if (osi_linux.default_disabling) {
-		status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
+		status = acpi_update_interfaces(osi_linux.default_disabling);
 
 		if (ACPI_SUCCESS(status))
-			printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n");
+			printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors%s\n",
+				osi_linux.default_disabling ==
+				ACPI_DISABLE_ALL_STRINGS ?
+				" and feature groups" : "");
 	}
 
 	for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
drivers/bluetooth/hci_vhci.c +21 -7
index 80783dcb7f57..aba31210c802 100644
@@ -50,6 +50,7 @@ struct vhci_data {
 	wait_queue_head_t read_wait;
 	struct sk_buff_head readq;
 
+	struct mutex open_mutex;
 	struct delayed_work open_timeout;
 };
 
@@ -87,12 +88,15 @@ static int vhci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
-static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
 {
 	struct hci_dev *hdev;
 	struct sk_buff *skb;
 	__u8 dev_type;
 
+	if (data->hdev)
+		return -EBADFD;
+
 	/* bits 0-1 are dev_type (BR/EDR or AMP) */
 	dev_type = opcode & 0x03;
 
@@ -151,6 +155,17 @@ static int vhci_create_device(struct vhci_data *data, __u8 opcode)
 	return 0;
 }
 
+static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+{
+	int err;
+
+	mutex_lock(&data->open_mutex);
+	err = __vhci_create_device(data, opcode);
+	mutex_unlock(&data->open_mutex);
+
+	return err;
+}
+
 static inline ssize_t vhci_get_user(struct vhci_data *data,
 				    struct iov_iter *from)
 {
@@ -189,11 +204,6 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 		break;
 
 	case HCI_VENDOR_PKT:
-		if (data->hdev) {
-			kfree_skb(skb);
-			return -EBADFD;
-		}
-
 		cancel_delayed_work_sync(&data->open_timeout);
 
 		opcode = *((__u8 *) skb->data);
@@ -320,6 +330,7 @@ static int vhci_open(struct inode *inode, struct file *file)
 	skb_queue_head_init(&data->readq);
 	init_waitqueue_head(&data->read_wait);
 
+	mutex_init(&data->open_mutex);
 	INIT_DELAYED_WORK(&data->open_timeout, vhci_open_timeout);
 
 	file->private_data = data;
@@ -333,15 +344,18 @@ static int vhci_open(struct inode *inode, struct file *file)
 static int vhci_release(struct inode *inode, struct file *file)
 {
 	struct vhci_data *data = file->private_data;
-	struct hci_dev *hdev = data->hdev;
+	struct hci_dev *hdev;
 
 	cancel_delayed_work_sync(&data->open_timeout);
 
+	hdev = data->hdev;
+
 	if (hdev) {
 		hci_unregister_dev(hdev);
 		hci_free_dev(hdev);
 	}
 
+	skb_queue_purge(&data->readq);
 	file->private_data = NULL;
 	kfree(data);
 
drivers/clk/bcm/clk-bcm2835.c +4 -0
index 9f4df8f645f8..dd2856b5633c 100644
@@ -1078,10 +1078,12 @@ static void bcm2835_pll_divider_off(struct clk_hw *hw)
 	struct bcm2835_cprman *cprman = divider->cprman;
 	const struct bcm2835_pll_divider_data *data = divider->data;
 
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, data->cm_reg,
 		     (cprman_read(cprman, data->cm_reg) &
 		      ~data->load_mask) | data->hold_mask);
 	cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+	spin_unlock(&cprman->regs_lock);
 }
 
 static int bcm2835_pll_divider_on(struct clk_hw *hw)
@@ -1090,12 +1092,14 @@ static int bcm2835_pll_divider_on(struct clk_hw *hw)
 	struct bcm2835_cprman *cprman = divider->cprman;
 	const struct bcm2835_pll_divider_data *data = divider->data;
 
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, data->a2w_reg,
 		     cprman_read(cprman, data->a2w_reg) &
 		     ~A2W_PLL_CHANNEL_DISABLE);
 
 	cprman_write(cprman, data->cm_reg,
 		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+	spin_unlock(&cprman->regs_lock);
 
 	return 0;
 }
drivers/clk/qcom/gcc-msm8916.c +2 -0
index 8cc9b2868b41..5f56d6aae31d 100644
@@ -2346,6 +2346,7 @@ static struct clk_branch gcc_crypto_ahb_clk = {
 				"pcnoc_bfdcd_clk_src",
 			},
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2381,6 +2382,7 @@ static struct clk_branch gcc_crypto_clk = {
 				"crypto_clk_src",
 			},
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
drivers/crypto/caam/jr.c +1 -1
index f7e0d8d4c3da..8f50a02ff68d 100644
@@ -248,7 +248,7 @@ static void caam_jr_dequeue(unsigned long devarg)
 struct device *caam_jr_alloc(void)
 {
 	struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
-	struct device *dev = NULL;
+	struct device *dev = ERR_PTR(-ENODEV);
 	int min_tfm_cnt	= INT_MAX;
 	int tfm_cnt;
 
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c +6 -4
index a19ee127edca..e72fea737a0d 100644
@@ -35,6 +35,7 @@ static int sun4i_ss_opti_poll(struct ablkcipher_request *areq)
 	unsigned int todo;
 	struct sg_mapping_iter mi, mo;
 	unsigned int oi, oo; /* offset for in and out */
+	unsigned long flags;
 
 	if (areq->nbytes == 0)
 		return 0;
@@ -49,7 +50,7 @@ static int sun4i_ss_opti_poll(struct ablkcipher_request *areq)
 		return -EINVAL;
 	}
 
-	spin_lock_bh(&ss->slock);
+	spin_lock_irqsave(&ss->slock, flags);
 
 	for (i = 0; i < op->keylen; i += 4)
 		writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -117,7 +118,7 @@ release_ss:
 	sg_miter_stop(&mi);
 	sg_miter_stop(&mo);
 	writel(0, ss->base + SS_CTL);
-	spin_unlock_bh(&ss->slock);
+	spin_unlock_irqrestore(&ss->slock, flags);
 	return err;
 }
 
@@ -149,6 +150,7 @@ static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq)
 	unsigned int ob = 0;	/* offset in buf */
 	unsigned int obo = 0;	/* offset in bufo*/
 	unsigned int obl = 0;	/* length of data in bufo */
+	unsigned long flags;
 
 	if (areq->nbytes == 0)
 		return 0;
@@ -181,7 +183,7 @@ static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq)
 	if (no_chunk == 1)
 		return sun4i_ss_opti_poll(areq);
 
-	spin_lock_bh(&ss->slock);
+	spin_lock_irqsave(&ss->slock, flags);
 
 	for (i = 0; i < op->keylen; i += 4)
 		writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -308,7 +310,7 @@ release_ss:
 	sg_miter_stop(&mi);
 	sg_miter_stop(&mo);
 	writel(0, ss->base + SS_CTL);
-	spin_unlock_bh(&ss->slock);
+	spin_unlock_irqrestore(&ss->slock, flags);
 
 	return err;
 }
drivers/crypto/talitos.c +64 -0

154 lines not on this page · raw message

drivers/infiniband/ulp/srp/ib_srp.c +1 -1
index 03022f6420d7..a09841abae50 100644
@@ -1541,7 +1541,7 @@ static int srp_map_idb(struct srp_rdma_ch *ch, struct srp_request *req,
 
 	if (dev->use_fast_reg) {
 		state.sg = idb_sg;
-		sg_set_buf(idb_sg, req->indirect_desc, idb_len);
+		sg_init_one(idb_sg, req->indirect_desc, idb_len);
 		idb_sg->dma_address = req->indirect_dma_addr; /* hack! */
 #ifdef CONFIG_NEED_SG_DMA_LENGTH
 		idb_sg->dma_length = idb_sg->length;	      /* hack^2 */
drivers/input/misc/pwm-beeper.c +48 -21

128 lines not on this page · raw message

drivers/irqchip/irq-gic-v3.c +19 -0
index d7be6ddc34f6..2fc499a2207e 100644
@@ -361,6 +361,13 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
 			if (static_key_true(&supports_deactivate))
 				gic_write_dir(irqnr);
 #ifdef CONFIG_SMP
+			/*
+			 * Unlike GICv2, we don't need an smp_rmb() here.
+			 * The control dependency from gic_read_iar to
+			 * the ISB in gic_write_eoir is enough to ensure
+			 * that any shared data read by handle_IPI will
+			 * be read after the ACK.
+			 */
 			handle_IPI(irqnr, regs);
 #else
 			WARN_ONCE(true, "Unexpected SGI received!\n");
@@ -380,6 +387,15 @@ static void __init gic_dist_init(void)
 	writel_relaxed(0, base + GICD_CTLR);
 	gic_dist_wait_for_rwp();
 
+	/*
+	 * Configure SPIs as non-secure Group-1. This will only matter
+	 * if the GIC only has a single security state. This will not
+	 * do the right thing if the kernel is running in secure mode,
+	 * but that's not the intended use case anyway.
+	 */
+	for (i = 32; i < gic_data.irq_nr; i += 32)
+		writel_relaxed(~0, base + GICD_IGROUPR + i / 8);
+
 	gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
 
 	/* Enable distributor with ARE, Group1 */
@@ -494,6 +510,9 @@ static void gic_cpu_init(void)
 
 	rbase = gic_data_rdist_sgi_base();
 
+	/* Configure SGIs/PPIs as non-secure Group-1 */
+	writel_relaxed(~0, rbase + GICR_IGROUPR0);
+
 	gic_cpu_config(rbase, gic_redist_wait_for_rwp);
 
 	/* Give LPIs a spin */
drivers/irqchip/irq-gic.c +8 -0
index 8f9ebf714e2b..eef950046ac0 100644
@@ -344,6 +344,14 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 			if (static_key_true(&supports_deactivate))
 				writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE);
 #ifdef CONFIG_SMP
+			/*
+			 * Ensure any shared data written by the CPU sending
+			 * the IPI is read after we've read the ACK register
+			 * on the GIC.
+			 *
+			 * Pairs with the write barrier in gic_raise_softirq
+			 */
+			smp_rmb();
 			handle_IPI(irqnr, regs);
 #endif
 			continue;
drivers/mcb/mcb-parse.c +1 -1
index 004926955263..b0155b05cddb 100644
@@ -57,7 +57,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus,
 	mdev->id = GDD_DEV(reg1);
 	mdev->rev = GDD_REV(reg1);
 	mdev->var = GDD_VAR(reg1);
-	mdev->bar = GDD_BAR(reg1);
+	mdev->bar = GDD_BAR(reg2);
 	mdev->group = GDD_GRP(reg2);
 	mdev->inst = GDD_INS(reg2);
 
drivers/mfd/omap-usb-tll.c +9 -4
index b7b3e8ee64f2..c30290f33430 100644
@@ -269,6 +269,8 @@ static int usbtll_omap_probe(struct platform_device *pdev)
 
 		if (IS_ERR(tll->ch_clk[i]))
 			dev_dbg(dev, "can't get clock : %s\n", clkname);
+		else
+			clk_prepare(tll->ch_clk[i]);
 	}
 
 	pm_runtime_put_sync(dev);
@@ -301,9 +303,12 @@ static int usbtll_omap_remove(struct platform_device *pdev)
 	tll_dev = NULL;
 	spin_unlock(&tll_lock);
 
-	for (i = 0; i < tll->nch; i++)
-		if (!IS_ERR(tll->ch_clk[i]))
+	for (i = 0; i < tll->nch; i++) {
+		if (!IS_ERR(tll->ch_clk[i])) {
+			clk_unprepare(tll->ch_clk[i]);
 			clk_put(tll->ch_clk[i]);
+		}
+	}
 
 	pm_runtime_disable(&pdev->dev);
 	return 0;
@@ -420,7 +425,7 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 			if (IS_ERR(tll->ch_clk[i]))
 				continue;
 
-			r = clk_prepare_enable(tll->ch_clk[i]);
+			r = clk_enable(tll->ch_clk[i]);
 			if (r) {
 				dev_err(tll_dev,
 				 "Error enabling ch %d clock: %d\n", i, r);
@@ -448,7 +453,7 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			if (!IS_ERR(tll->ch_clk[i]))
-				clk_disable_unprepare(tll->ch_clk[i]);
+				clk_disable(tll->ch_clk[i]);
 		}
 	}
 
drivers/misc/mei/amthif.c +3 -1
index cd0403f09267..e79c0371ee6f 100644
@@ -417,8 +417,10 @@ int mei_amthif_irq_read_msg(struct mei_cl *cl,
 
 	dev = cl->dev;
 
-	if (dev->iamthif_state != MEI_IAMTHIF_READING)
+	if (dev->iamthif_state != MEI_IAMTHIF_READING) {
+		mei_irq_discard_msg(dev, mei_hdr);
 		return 0;
+	}
 
 	ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list);
 	if (ret)
drivers/misc/mei/bus.c +12 -3
index 1a173d0af694..a77643954523 100644
@@ -222,17 +222,23 @@ EXPORT_SYMBOL_GPL(mei_cldev_recv);
 static void mei_cl_bus_event_work(struct work_struct *work)
 {
 	struct mei_cl_device *cldev;
+	struct mei_device *bus;
 
 	cldev = container_of(work, struct mei_cl_device, event_work);
 
+	bus = cldev->bus;
+
 	if (cldev->event_cb)
 		cldev->event_cb(cldev, cldev->events, cldev->event_context);
 
 	cldev->events = 0;
 
 	/* Prepare for the next read */
-	if (cldev->events_mask & BIT(MEI_CL_EVENT_RX))
+	if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
+		mutex_lock(&bus->device_lock);
 		mei_cl_read_start(cldev->cl, 0, NULL);
+		mutex_unlock(&bus->device_lock);
+	}
 }
 
 /**
@@ -296,6 +302,7 @@ int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
 				unsigned long events_mask,
 				mei_cldev_event_cb_t event_cb, void *context)
 {
+	struct mei_device *bus = cldev->bus;
 	int ret;
 
 	if (cldev->event_cb)
@@ -308,15 +315,17 @@ int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
 	INIT_WORK(&cldev->event_work, mei_cl_bus_event_work);
 
 	if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
+		mutex_lock(&bus->device_lock);
 		ret = mei_cl_read_start(cldev->cl, 0, NULL);
+		mutex_unlock(&bus->device_lock);
 		if (ret && ret != -EBUSY)
 			return ret;
 	}
 
 	if (cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)) {
-		mutex_lock(&cldev->cl->dev->device_lock);
+		mutex_lock(&bus->device_lock);
 		ret = mei_cl_notify_request(cldev->cl, NULL, event_cb ? 1 : 0);
-		mutex_unlock(&cldev->cl->dev->device_lock);
+		mutex_unlock(&bus->device_lock);
 		if (ret)
 			return ret;
 	}
drivers/misc/mei/client.c +4 -0
index a6c87c713193..958af84884b5 100644
@@ -1735,6 +1735,10 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb)
 			wake_up(&cl->wait);
 
 		break;
+	case MEI_FOP_DISCONNECT_RSP:
+		mei_io_cb_free(cb);
+		mei_cl_set_disconnected(cl);
+		break;
 	default:
 		BUG_ON(0);
 	}
drivers/misc/mei/hbm.c +1 -2
index e7b7aad0999b..fd8a9f057ea6 100644
@@ -873,8 +873,7 @@ static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
 		cb = mei_io_cb_init(cl, MEI_FOP_DISCONNECT_RSP, NULL);
 		if (!cb)
 			return -ENOMEM;
-		cl_dbg(dev, cl, "add disconnect response as first\n");
-		list_add(&cb->list, &dev->ctrl_wr_list.list);
+		list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
 	}
 	return 0;
 }
drivers/misc/mei/interrupt.c +1 -5
index 64b568a0268d..d1df797c7568 100644
@@ -76,7 +76,6 @@ static inline int mei_cl_hbm_equal(struct mei_cl *cl,
  * @dev: mei device
  * @hdr: message header
  */
-static inline
 void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr)
 {
 	/*
@@ -184,10 +183,7 @@ static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb,
 		return -EMSGSIZE;
 
 	ret = mei_hbm_cl_disconnect_rsp(dev, cl);
-	mei_cl_set_disconnected(cl);
-	mei_io_cb_free(cb);
-	mei_me_cl_put(cl->me_cl);
-	cl->me_cl = NULL;
+	list_move_tail(&cb->list, &cmpl_list->list);
 
 	return ret;
 }
drivers/misc/mei/mei_dev.h +2 -0
index 4250555d5e72..1b06e2fd6858 100644
@@ -782,6 +782,8 @@ bool mei_hbuf_acquire(struct mei_device *dev);
 
 bool mei_write_is_idle(struct mei_device *dev);
 
+void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr);
+
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 int mei_dbgfs_register(struct mei_device *dev, const char *name);
 void mei_dbgfs_deregister(struct mei_device *dev);
drivers/mmc/card/block.c +3 -2
index c6f36f3ca5d2..7630b6b7eb75 100644
@@ -2494,11 +2494,12 @@ static const struct mmc_fixup blk_fixups[] =
 		  MMC_QUIRK_BLK_NO_CMD23),
 
 	/*
-	 * Some Micron MMC cards needs longer data read timeout than
-	 * indicated in CSD.
+	 * Some MMC cards need longer data read timeout than indicated in CSD.
 	 */
 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
+	MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_LONG_READ_TIME),
 
 	/*
 	 * On these Samsung MoviNAND parts, performing secure erase or
drivers/mmc/core/core.c +2 -2
index f95d41ffc766..228a81bcea49 100644
@@ -868,11 +868,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 	/*
 	 * Some cards require longer data read timeout than indicated in CSD.
 	 * Address this by setting the read timeout to a "reasonably high"
-	 * value. For the cards tested, 300ms has proven enough. If necessary,
+	 * value. For the cards tested, 600ms has proven enough. If necessary,
 	 * this value can be increased if other problematic cards require this.
 	 */
 	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
-		data->timeout_ns = 300000000;
+		data->timeout_ns = 600000000;
 		data->timeout_clks = 0;
 	}
 
drivers/mmc/core/mmc.c +7 -0
index bf49e44571f2..07a419fedd43 100644
@@ -333,6 +333,9 @@ static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd)
 	}
 }
 
+/* Minimum partition switch timeout in milliseconds */
+#define MMC_MIN_PART_SWITCH_TIME	300
+
 /*
  * Decode extended CSD.
  */
@@ -397,6 +400,10 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 
 		/* EXT_CSD value is in units of 10ms, but we store in ms */
 		card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
+		/* Some eMMC set the value too low so set a minimum */
+		if (card->ext_csd.part_time &&
+		    card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+			card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
 
 		/* Sleep / awake timeout in 100ns units */
 		if (sa_shift > 0 && sa_shift <= 0x17)
drivers/mmc/host/sdhci-acpi.c +9 -4
index 975139f97498..e517be7f03bf 100644
@@ -307,7 +307,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
 	.chip    = &sdhci_acpi_chip_int,
 	.caps    = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
 		   MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
-		   MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+		   MMC_CAP_WAIT_WHILE_BUSY,
 	.caps2   = MMC_CAP2_HC_ERASE_SZ,
 	.flags   = SDHCI_ACPI_RUNTIME_PM,
 	.quirks  = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -322,7 +322,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
 		   SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
 	.caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
-		   MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+		   MMC_CAP_WAIT_WHILE_BUSY,
 	.flags   = SDHCI_ACPI_RUNTIME_PM,
 	.pm_caps = MMC_PM_KEEP_POWER,
 	.probe_slot	= sdhci_acpi_sdio_probe_slot,
@@ -334,7 +334,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
 	.quirks  = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
 		   SDHCI_QUIRK2_STOP_WITH_TC,
-	.caps    = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+	.caps    = MMC_CAP_WAIT_WHILE_BUSY,
 	.probe_slot	= sdhci_acpi_sd_probe_slot,
 };
 
@@ -396,7 +396,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	acpi_handle handle = ACPI_HANDLE(dev);
-	struct acpi_device *device;
+	struct acpi_device *device, *child;
 	struct sdhci_acpi_host *c;
 	struct sdhci_host *host;
 	struct resource *iomem;
@@ -408,6 +408,11 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	if (acpi_bus_get_device(handle, &device))
 		return -ENODEV;
 
+	/* Power on the SDHCI controller and its children */
+	acpi_device_fix_up_power(device);
+	list_for_each_entry(child, &device->children, node)
+		acpi_device_fix_up_power(child);
+
 	if (acpi_bus_get_status(device) || !device->status.present)
 		return -ENODEV;
 
drivers/mmc/host/sdhci-pci-core.c +1 -4
index a04d0f7ee00e..807f930a7c14 100644
@@ -361,7 +361,6 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 {
 	slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
 				 MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
-				 MMC_CAP_BUS_WIDTH_TEST |
 				 MMC_CAP_WAIT_WHILE_BUSY;
 	slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
 	slot->hw_reset = sdhci_pci_int_hw_reset;
@@ -377,15 +376,13 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
 {
 	slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
-				 MMC_CAP_BUS_WIDTH_TEST |
 				 MMC_CAP_WAIT_WHILE_BUSY;
 	return 0;
 }
 
 static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
 {
-	slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
-				 MMC_CAP_WAIT_WHILE_BUSY;
+	slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
 	slot->cd_con_id = NULL;
 	slot->cd_idx = 0;
 	slot->cd_override_level = true;
drivers/mtd/ubi/eba.c +19 -2
index 5b9834cf2820..96fddb016bf1 100644
@@ -426,8 +426,25 @@ retry:
 						 pnum, vol_id, lnum);
 					err = -EBADMSG;
 				} else {
-					err = -EINVAL;
-					ubi_ro_mode(ubi);
+					/*
+					 * Ending up here in the non-Fastmap case
+					 * is a clear bug as the VID header had to
+					 * be present at scan time to have it referenced.
+					 * With fastmap the story is more complicated.
+					 * Fastmap has the mapping info without the need
+					 * of a full scan. So the LEB could have been
+					 * unmapped, Fastmap cannot know this and keeps
+					 * the LEB referenced.
+					 * This is valid and works as the layer above UBI
+					 * has to do bookkeeping about used/referenced
+					 * LEBs in any case.
+					 */
+					if (ubi->fast_attach) {
+						err = -EBADMSG;
+					} else {
+						err = -EINVAL;
+						ubi_ro_mode(ubi);
+					}
 				}
 			}
 			goto out_free;
drivers/mtd/ubi/fastmap.c +1 -0
index 263b439e21a8..990898b9dc72 100644
@@ -1058,6 +1058,7 @@ int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
 	ubi_msg(ubi, "fastmap WL pool size: %d",
 		ubi->fm_wl_pool.max_size);
 	ubi->fm_disabled = 0;
+	ubi->fast_attach = 1;
 
 	ubi_free_vid_hdr(ubi, vh);
 	kfree(ech);
drivers/mtd/ubi/ubi.h +2 -0
index 2974b67f6c6c..de1ea2e4c37d 100644
@@ -462,6 +462,7 @@ struct ubi_debug_info {
  * @fm_eba_sem: allows ubi_update_fastmap() to block EBA table changes
  * @fm_work: fastmap work queue
  * @fm_work_scheduled: non-zero if fastmap work was scheduled
+ * @fast_attach: non-zero if UBI was attached by fastmap
  *
  * @used: RB-tree of used physical eraseblocks
  * @erroneous: RB-tree of erroneous used physical eraseblocks
@@ -570,6 +571,7 @@ struct ubi_device {
 	size_t fm_size;
 	struct work_struct fm_work;
 	int fm_work_scheduled;
+	int fast_attach;
 
 	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
drivers/net/can/dev.c +52 -4

94 lines not on this page · raw message

drivers/net/can/m_can/m_can.c +1 -1
index 39cf911f7a1e..195f15edb32e 100644
@@ -955,7 +955,7 @@ static struct net_device *alloc_m_can_dev(void)
 	priv->can.do_get_berr_counter = m_can_get_berr_counter;
 
 	/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
-	priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+	can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
 
 	/* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
drivers/net/usb/asix_common.c +1 -1
index 0c5c22b84da8..7de5ab589e4e 100644
@@ -66,7 +66,7 @@ int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
 	 * buffer.
 	 */
 	if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
-		offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
+		offset = ((rx->remaining + 1) & 0xfffe);
 		rx->header = get_unaligned_le32(skb->data + offset);
 		offset = 0;
 
drivers/nfc/st21nfca/i2c.c +4 -2
index 1f44a151d206..d5a099b022e4 100644
@@ -524,8 +524,10 @@ static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
 	/* Get EN GPIO from ACPI */
 	gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1,
 					 GPIOD_OUT_LOW);
-	if (!IS_ERR(gpiod_ena))
-		phy->gpio_ena = desc_to_gpio(gpiod_ena);
+	if (!IS_ERR(gpiod_ena)) {
+		nfc_err(dev, "Unable to get ENABLE GPIO\n");
+		return -ENODEV;
+	}
 
 	phy->gpio_ena = desc_to_gpio(gpiod_ena);
 
drivers/platform/x86/dell-rbtn.c +56 -0

77 lines not on this page · raw message

drivers/scsi/scsi_scan.c +1 -0
index 6a820668d442..b7cc6027cb7b 100644
@@ -315,6 +315,7 @@ static void scsi_target_destroy(struct scsi_target *starget)
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
 	unsigned long flags;
 
+	BUG_ON(starget->state == STARGET_DEL);
 	starget->state = STARGET_DEL;
 	transport_destroy_device(dev);
 	spin_lock_irqsave(shost->host_lock, flags);
drivers/scsi/scsi_sysfs.c +3 -3
index 00bc7218a7f8..9e5f893aa3ad 100644
@@ -1272,18 +1272,18 @@ static void __scsi_remove_target(struct scsi_target *starget)
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget, *last_target = NULL;
+	struct scsi_target *starget;
 	unsigned long flags;
 
 restart:
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
 		if (starget->state == STARGET_DEL ||
-		    starget == last_target)
+		    starget->state == STARGET_REMOVE)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
 			kref_get(&starget->reap_ref);
-			last_target = starget;
+			starget->state = STARGET_REMOVE;
 			spin_unlock_irqrestore(shost->host_lock, flags);
 			__scsi_remove_target(starget);
 			scsi_target_reap(starget);
drivers/staging/comedi/drivers/das1800.c +13 -9
index 940781183fac..3be10963f98b 100644
@@ -567,14 +567,17 @@ static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 	struct comedi_isadma_desc *desc;
 	int i;
 
-	outb(0x0, dev->iobase + DAS1800_STATUS);	/* disable conversions */
-	outb(0x0, dev->iobase + DAS1800_CONTROL_B);	/* disable interrupts and dma */
-	outb(0x0, dev->iobase + DAS1800_CONTROL_A);	/* disable and clear fifo and stop triggering */
-
-	for (i = 0; i < 2; i++) {
-		desc = &dma->desc[i];
-		if (desc->chan)
-			comedi_isadma_disable(desc->chan);
+	/* disable and stop conversions */
+	outb(0x0, dev->iobase + DAS1800_STATUS);
+	outb(0x0, dev->iobase + DAS1800_CONTROL_B);
+	outb(0x0, dev->iobase + DAS1800_CONTROL_A);
+
+	if (dma) {
+		for (i = 0; i < 2; i++) {
+			desc = &dma->desc[i];
+			if (desc->chan)
+				comedi_isadma_disable(desc->chan);
+		}
 	}
 
 	return 0;
@@ -934,13 +937,14 @@ static void das1800_ai_setup_dma(struct comedi_device *dev,
 {
 	struct das1800_private *devpriv = dev->private;
 	struct comedi_isadma *dma = devpriv->dma;
-	struct comedi_isadma_desc *desc = &dma->desc[0];
+	struct comedi_isadma_desc *desc;
 	unsigned int bytes;
 
 	if ((devpriv->irq_dma_bits & DMA_ENABLED) == 0)
 		return;
 
 	dma->cur_dma = 0;
+	desc = &dma->desc[0];
 
 	/* determine a dma transfer size to fill buffer in 0.3 sec */
 	bytes = das1800_ai_transfer_size(dev, s, desc->maxsize, 300000000);
drivers/thunderbolt/eeprom.c +1 -0
index 0dde34e3a7c5..545c60c826a1 100644
@@ -444,6 +444,7 @@ int tb_drom_read(struct tb_switch *sw)
 	return tb_drom_parse_entries(sw);
 err:
 	kfree(sw->drom);
+	sw->drom = NULL;
 	return -EIO;
 
 }
drivers/tty/n_gsm.c +3 -1
index c3fe026d3168..9aff37186246 100644
@@ -2045,7 +2045,9 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
 		}
 	}
 	spin_unlock(&gsm_mux_lock);
-	WARN_ON(i == MAX_MUX);
+	/* open failed before registering => nothing to do */
+	if (i == MAX_MUX)
+		return;
 
 	/* In theory disconnecting DLCI 0 is sufficient but for some
 	   modems this is apparently not the case. */
drivers/tty/n_hdlc.c +2 -2
index bbc4ce66c2c1..644ddb841d9f 100644
@@ -600,7 +600,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
 	add_wait_queue(&tty->read_wait, &wait);
 
 	for (;;) {
-		if (test_bit(TTY_OTHER_DONE, &tty->flags)) {
+		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
 			ret = -EIO;
 			break;
 		}
@@ -828,7 +828,7 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
 		/* set bits for operations that won't block */
 		if (n_hdlc->rx_buf_list.head)
 			mask |= POLLIN | POLLRDNORM;	/* readable */
-		if (test_bit(TTY_OTHER_DONE, &tty->flags))
+		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
 			mask |= POLLHUP;
 		if (tty_hung_up_p(filp))
 			mask |= POLLHUP;
drivers/tty/n_tty.c +33 -37

102 lines not on this page · raw message

drivers/tty/pty.c +1 -3
index 2348fa613707..6427a39bd360 100644
@@ -59,7 +59,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 	if (!tty->link)
 		return;
 	set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
-	tty_flip_buffer_push(tty->link->port);
+	wake_up_interruptible(&tty->link->read_wait);
 	wake_up_interruptible(&tty->link->write_wait);
 	if (tty->driver->subtype == PTY_TYPE_MASTER) {
 		set_bit(TTY_OTHER_CLOSED, &tty->flags);
@@ -247,9 +247,7 @@ static int pty_open(struct tty_struct *tty, struct file *filp)
 		goto out;
 
 	clear_bit(TTY_IO_ERROR, &tty->flags);
-	/* TTY_OTHER_CLOSED must be cleared before TTY_OTHER_DONE */
 	clear_bit(TTY_OTHER_CLOSED, &tty->link->flags);
-	clear_bit(TTY_OTHER_DONE, &tty->link->flags);
 	set_bit(TTY_THROTTLED, &tty->flags);
 	return 0;
 
drivers/tty/serial/8250/8250_mid.c +22 -13
index 88531a36b69c..ed489880e62b 100644
@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 
 #include <linux/dma/hsu.h>
+#include <linux/8250_pci.h>
 
 #include "8250.h"
 
@@ -24,6 +25,7 @@
 #define PCI_DEVICE_ID_INTEL_DNV_UART	0x19d8
 
 /* Intel MID Specific registers */
+#define INTEL_MID_UART_DNV_FISR		0x08
 #define INTEL_MID_UART_PS		0x30
 #define INTEL_MID_UART_MUL		0x34
 #define INTEL_MID_UART_DIV		0x38
@@ -31,6 +33,7 @@
 struct mid8250;
 
 struct mid8250_board {
+	unsigned int flags;
 	unsigned long freq;
 	unsigned int base_baud;
 	int (*setup)(struct mid8250 *, struct uart_port *p);
@@ -88,16 +91,16 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
 static int dnv_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
-	int ret;
-
-	ret = hsu_dma_irq(&mid->dma_chip, 0);
-	ret |= hsu_dma_irq(&mid->dma_chip, 1);
-
-	/* For now, letting the HW generate separate interrupt for the UART */
-	if (ret)
-		return ret;
-
-	return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+	unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+	int ret = IRQ_NONE;
+
+	if (fisr & BIT(2))
+		ret |= hsu_dma_irq(&mid->dma_chip, 1);
+	if (fisr & BIT(1))
+		ret |= hsu_dma_irq(&mid->dma_chip, 0);
+	if (fisr & BIT(0))
+		ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+	return ret;
 }
 
 #define DNV_DMA_CHAN_OFFSET 0x80
@@ -106,12 +109,13 @@ static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
 {
 	struct hsu_dma_chip *chip = &mid->dma_chip;
 	struct pci_dev *pdev = to_pci_dev(p->dev);
+	unsigned int bar = FL_GET_BASE(mid->board->flags);
 	int ret;
 
 	chip->dev = &pdev->dev;
 	chip->irq = pdev->irq;
 	chip->regs = p->membase;
-	chip->length = pci_resource_len(pdev, 0);
+	chip->length = pci_resource_len(pdev, bar);
 	chip->offset = DNV_DMA_CHAN_OFFSET;
 
 	/* Falling back to PIO mode if DMA probing fails */
@@ -217,6 +221,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct uart_8250_port uart;
 	struct mid8250 *mid;
+	unsigned int bar;
 	int ret;
 
 	ret = pcim_enable_device(pdev);
@@ -230,6 +235,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENOMEM;
 
 	mid->board = (struct mid8250_board *)id->driver_data;
+	bar = FL_GET_BASE(mid->board->flags);
 
 	memset(&uart, 0, sizeof(struct uart_8250_port));
 
@@ -242,8 +248,8 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	uart.port.set_termios = mid8250_set_termios;
 
-	uart.port.mapbase = pci_resource_start(pdev, 0);
-	uart.port.membase = pcim_iomap(pdev, 0, 0);
+	uart.port.mapbase = pci_resource_start(pdev, bar);
+	uart.port.membase = pcim_iomap(pdev, bar, 0);
 	if (!uart.port.membase)
 		return -ENOMEM;
 
@@ -282,18 +288,21 @@ static void mid8250_remove(struct pci_dev *pdev)
 }
 
 static const struct mid8250_board pnw_board = {
+	.flags = FL_BASE0,
 	.freq = 50000000,
 	.base_baud = 115200,
 	.setup = pnw_setup,
 };
 
 static const struct mid8250_board tng_board = {
+	.flags = FL_BASE0,
 	.freq = 38400000,
 	.base_baud = 1843200,
 	.setup = tng_setup,
 };
 
 static const struct mid8250_board dnv_board = {
+	.flags = FL_BASE1,
 	.freq = 133333333,
 	.base_baud = 115200,
 	.setup = dnv_setup,
drivers/tty/serial/8250/8250_pci.c +3 -0
index 7cd6f9a90542..c1d4a8fa9be8 100644
@@ -1401,6 +1401,9 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
 	unsigned long m, n;
 	u32 reg;
 
+	/* Gracefully handle the B0 case: fall back to B9600 */
+	fuart = fuart ? fuart : 9600 * 16;
+
 	/* Get Fuart closer to Fref */
 	fuart *= rounddown_pow_of_two(fref / fuart);
 
drivers/tty/serial/atmel_serial.c +13 -1
index 1c0884d8ef32..172a8ccb0b63 100644
@@ -273,6 +273,13 @@ static bool atmel_use_dma_rx(struct uart_port *port)
 	return atmel_port->use_dma_rx;
 }
 
+static bool atmel_use_fifo(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	return atmel_port->fifo_size;
+}
+
 static unsigned int atmel_get_lines_status(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -2082,7 +2089,12 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 		mode |= ATMEL_US_USMODE_RS485;
 	} else if (termios->c_cflag & CRTSCTS) {
 		/* RS232 with hardware handshake (RTS/CTS) */
-		mode |= ATMEL_US_USMODE_HWHS;
+		if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
+			dev_info(port->dev, "not enabling hardware flow control because DMA is used");
+			termios->c_cflag &= ~CRTSCTS;
+		} else {
+			mode |= ATMEL_US_USMODE_HWHS;
+		}
 	} else {
 		/* RS232 without hadware handshake */
 		mode |= ATMEL_US_USMODE_NORMAL;
drivers/tty/serial/samsung.c +2 -2
index d72cd736bdc6..8320173af846 100644
@@ -1263,6 +1263,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	/* check to see if we need  to change clock source */
 
 	if (ourport->baudclk != clk) {
+		clk_prepare_enable(clk);
+
 		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (!IS_ERR(ourport->baudclk)) {
@@ -1270,8 +1272,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 			ourport->baudclk = ERR_PTR(-EINVAL);
 		}
 
-		clk_prepare_enable(clk);
-
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
drivers/tty/tty_buffer.c +6 -28
index 3cd31e0d4bd9..fb31eecb708d 100644
@@ -37,29 +37,6 @@
 
 #define TTY_BUFFER_PAGE	(((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
 
-/*
- * If all tty flip buffers have been processed by flush_to_ldisc() or
- * dropped by tty_buffer_flush(), check if the linked pty has been closed.
- * If so, wake the reader/poll to process
- */
-static inline void check_other_closed(struct tty_struct *tty)
-{
-	unsigned long flags, old;
-
-	/* transition from TTY_OTHER_CLOSED => TTY_OTHER_DONE must be atomic */
-	for (flags = ACCESS_ONCE(tty->flags);
-	     test_bit(TTY_OTHER_CLOSED, &flags);
-	     ) {
-		old = flags;
-		__set_bit(TTY_OTHER_DONE, &flags);
-		flags = cmpxchg(&tty->flags, old, flags);
-		if (old == flags) {
-			wake_up_interruptible(&tty->read_wait);
-			break;
-		}
-	}
-}
-
 /**
  *	tty_buffer_lock_exclusive	-	gain exclusive access to buffer
  *	tty_buffer_unlock_exclusive	-	release exclusive access
@@ -254,8 +231,6 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld)
 	if (ld && ld->ops->flush_buffer)
 		ld->ops->flush_buffer(tty);
 
-	check_other_closed(tty);
-
 	atomic_dec(&buf->priority);
 	mutex_unlock(&buf->lock);
 }
@@ -505,10 +480,8 @@ static void flush_to_ldisc(struct work_struct *work)
 		 */
 		count = smp_load_acquire(&head->commit) - head->read;
 		if (!count) {
-			if (next == NULL) {
-				check_other_closed(tty);
+			if (next == NULL)
 				break;
-			}
 			buf->head = next;
 			tty_buffer_free(port, head);
 			continue;
@@ -597,3 +570,8 @@ bool tty_buffer_cancel_work(struct tty_port *port)
 {
 	return cancel_work_sync(&port->buf.work);
 }
+
+void tty_buffer_flush_work(struct tty_port *port)
+{
+	flush_work(&port->buf.work);
+}
drivers/tty/vt/vt.c +3 -2
index bd51bdd0a7bf..2b5382ea4842 100644
@@ -3583,9 +3583,10 @@ static int do_register_con_driver(const struct consw *csw, int first, int last)
 		goto err;
 
 	desc = csw->con_startup();
-
-	if (!desc)
+	if (!desc) {
+		retval = -ENODEV;
 		goto err;
+	}
 
 	retval = -EINVAL;
 
drivers/usb/core/driver.c +23 -17
index 2057d91d8336..dadd1e8dfe09 100644
@@ -284,7 +284,7 @@ static int usb_probe_interface(struct device *dev)
 	struct usb_device *udev = interface_to_usbdev(intf);
 	const struct usb_device_id *id;
 	int error = -ENODEV;
-	int lpm_disable_error;
+	int lpm_disable_error = -ENODEV;
 
 	dev_dbg(dev, "%s\n", __func__);
 
@@ -336,12 +336,14 @@ static int usb_probe_interface(struct device *dev)
 	 * setting during probe, that should also be fine.  usb_set_interface()
 	 * will attempt to disable LPM, and fail if it can't disable it.
 	 */
-	lpm_disable_error = usb_unlocked_disable_lpm(udev);
-	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
-		dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
-				__func__, driver->name);
-		error = lpm_disable_error;
-		goto err;
+	if (driver->disable_hub_initiated_lpm) {
+		lpm_disable_error = usb_unlocked_disable_lpm(udev);
+		if (lpm_disable_error) {
+			dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+					__func__, driver->name);
+			error = lpm_disable_error;
+			goto err;
+		}
 	}
 
 	/* Carry out a deferred switch to altsetting 0 */
@@ -391,7 +393,8 @@ static int usb_unbind_interface(struct device *dev)
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct usb_host_endpoint *ep, **eps = NULL;
 	struct usb_device *udev;
-	int i, j, error, r, lpm_disable_error;
+	int i, j, error, r;
+	int lpm_disable_error = -ENODEV;
 
 	intf->condition = USB_INTERFACE_UNBINDING;
 
@@ -399,12 +402,13 @@ static int usb_unbind_interface(struct device *dev)
 	udev = interface_to_usbdev(intf);
 	error = usb_autoresume_device(udev);
 
-	/* Hub-initiated LPM policy may change, so attempt to disable LPM until
+	/* If hub-initiated LPM policy may change, attempt to disable LPM until
 	 * the driver is unbound.  If LPM isn't disabled, that's fine because it
 	 * wouldn't be enabled unless all the bound interfaces supported
 	 * hub-initiated LPM.
 	 */
-	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+	if (driver->disable_hub_initiated_lpm)
+		lpm_disable_error = usb_unlocked_disable_lpm(udev);
 
 	/*
 	 * Terminate all URBs for this interface unless the driver
@@ -505,7 +509,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	struct device *dev;
 	struct usb_device *udev;
 	int retval = 0;
-	int lpm_disable_error;
+	int lpm_disable_error = -ENODEV;
 
 	if (!iface)
 		return -ENODEV;
@@ -526,12 +530,14 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 
 	iface->condition = USB_INTERFACE_BOUND;
 
-	/* Disable LPM until this driver is bound. */
-	lpm_disable_error = usb_unlocked_disable_lpm(udev);
-	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
-		dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
-				__func__, driver->name);
-		return -ENOMEM;
+	/* See the comment about disabling LPM in usb_probe_interface(). */
+	if (driver->disable_hub_initiated_lpm) {
+		lpm_disable_error = usb_unlocked_disable_lpm(udev);
+		if (lpm_disable_error) {
+			dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+					__func__, driver->name);
+			return -ENOMEM;
+		}
 	}
 
 	/* Claimed interfaces are initially inactive (suspended) and
drivers/usb/gadget/function/f_fs.c +1 -1
index 79d895c2dd71..97ef75af9632 100644
@@ -651,7 +651,7 @@ static void ffs_user_copy_worker(struct work_struct *work)
 	if (io_data->read && ret > 0) {
 		use_mm(io_data->mm);
 		ret = copy_to_iter(io_data->buf, ret, &io_data->data);
-		if (iov_iter_count(&io_data->data))
+		if (ret != io_data->req->actual && iov_iter_count(&io_data->data))
 			ret = -EFAULT;
 		unuse_mm(io_data->mm);
 	}
drivers/usb/gadget/function/f_mass_storage.c +15 -21
index 223ccf89d226..a4f664062e0c 100644
@@ -2977,25 +2977,6 @@ void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
 
-int fsg_common_run_thread(struct fsg_common *common)
-{
-	common->state = FSG_STATE_IDLE;
-	/* Tell the thread to start working */
-	common->thread_task =
-		kthread_create(fsg_main_thread, common, "file-storage");
-	if (IS_ERR(common->thread_task)) {
-		common->state = FSG_STATE_TERMINATED;
-		return PTR_ERR(common->thread_task);
-	}
-
-	DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
-
-	wake_up_process(common->thread_task);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(fsg_common_run_thread);
-
 static void fsg_common_release(struct kref *ref)
 {
 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
@@ -3005,6 +2986,7 @@ static void fsg_common_release(struct kref *ref)
 	if (common->state != FSG_STATE_TERMINATED) {
 		raise_exception(common, FSG_STATE_EXIT);
 		wait_for_completion(&common->thread_notifier);
+		common->thread_task = NULL;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
@@ -3050,9 +3032,21 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 		if (ret)
 			return ret;
 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
-		ret = fsg_common_run_thread(fsg->common);
-		if (ret)
+	}
+
+	if (!common->thread_task) {
+		common->state = FSG_STATE_IDLE;
+		common->thread_task =
+			kthread_create(fsg_main_thread, common, "file-storage");
+		if (IS_ERR(common->thread_task)) {
+			int ret = PTR_ERR(common->thread_task);
+			common->thread_task = NULL;
+			common->state = FSG_STATE_TERMINATED;
 			return ret;
+		}
+		DBG(common, "I/O thread pid: %d\n",
+		    task_pid_nr(common->thread_task));
+		wake_up_process(common->thread_task);
 	}
 
 	fsg->gadget = gadget;
drivers/usb/gadget/function/f_mass_storage.h +0 -2
index 445df6775609..b6a9918eaefb 100644
@@ -153,8 +153,6 @@ int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg);
 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
 				   const char *pn);
 
-int fsg_common_run_thread(struct fsg_common *common);
-
 void fsg_config_from_params(struct fsg_config *cfg,
 			    const struct fsg_module_parameters *params,
 			    unsigned int fsg_num_buffers);
drivers/usb/gadget/legacy/acm_ms.c +0 -4
index c16089efc322..c39de65a448b 100644
@@ -133,10 +133,6 @@ static int acm_ms_do_config(struct usb_configuration *c)
 	if (status < 0)
 		goto put_msg;
 
-	status = fsg_common_run_thread(opts->common);
-	if (status)
-		goto remove_acm;
-
 	status = usb_add_function(c, f_msg);
 	if (status)
 		goto remove_acm;
drivers/usb/gadget/legacy/mass_storage.c +0 -4
index e61af53c7d2b..125974f32f50 100644
@@ -132,10 +132,6 @@ static int msg_do_config(struct usb_configuration *c)
 	if (IS_ERR(f_msg))
 		return PTR_ERR(f_msg);
 
-	ret = fsg_common_run_thread(opts->common);
-	if (ret)
-		goto put_func;
-
 	ret = usb_add_function(c, f_msg);
 	if (ret)
 		goto put_func;
drivers/usb/gadget/legacy/multi.c +0 -12
index 229d704a620b..a70a406580ea 100644
@@ -137,7 +137,6 @@ static struct usb_function *f_msg_rndis;
 
 static int rndis_do_config(struct usb_configuration *c)
 {
-	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -169,11 +168,6 @@ static int rndis_do_config(struct usb_configuration *c)
 		goto err_fsg;
 	}
 
-	fsg_opts = fsg_opts_from_func_inst(fi_msg);
-	ret = fsg_common_run_thread(fsg_opts->common);
-	if (ret)
-		goto err_run;
-
 	ret = usb_add_function(c, f_msg_rndis);
 	if (ret)
 		goto err_run;
@@ -225,7 +219,6 @@ static struct usb_function *f_msg_multi;
 
 static int cdc_do_config(struct usb_configuration *c)
 {
-	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -258,11 +251,6 @@ static int cdc_do_config(struct usb_configuration *c)
 		goto err_fsg;
 	}
 
-	fsg_opts = fsg_opts_from_func_inst(fi_msg);
-	ret = fsg_common_run_thread(fsg_opts->common);
-	if (ret)
-		goto err_run;
-
 	ret = usb_add_function(c, f_msg_multi);
 	if (ret)
 		goto err_run;
drivers/usb/gadget/legacy/nokia.c +0 -7
index 09975046c694..b1e535f4022e 100644
@@ -152,7 +152,6 @@ static int nokia_bind_config(struct usb_configuration *c)
 	struct usb_function *f_ecm;
 	struct usb_function *f_obex2 = NULL;
 	struct usb_function *f_msg;
-	struct fsg_opts *fsg_opts;
 	int status = 0;
 	int obex1_stat = -1;
 	int obex2_stat = -1;
@@ -222,12 +221,6 @@ static int nokia_bind_config(struct usb_configuration *c)
 		goto err_ecm;
 	}
 
-	fsg_opts = fsg_opts_from_func_inst(fi_msg);
-
-	status = fsg_common_run_thread(fsg_opts->common);
-	if (status)
-		goto err_msg;
-
 	status = usb_add_function(c, f_msg);
 	if (status)
 		goto err_msg;
drivers/usb/gadget/udc/udc-core.c +1 -1
index b86a6f03592e..e272b3ba1d14 100644
@@ -75,7 +75,7 @@ int usb_gadget_map_request(struct usb_gadget *gadget,
 		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
 				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 		if (mapped == 0) {
-			dev_err(&gadget->dev, "failed to map SGs\n");
+			dev_err(dev, "failed to map SGs\n");
 			return -EFAULT;
 		}
 
drivers/usb/misc/usbtest.c +3 -1
index 92fdb6e9faff..c78ff95a43be 100644
@@ -529,6 +529,7 @@ static struct scatterlist *
 alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe)
 {
 	struct scatterlist	*sg;
+	unsigned int		n_size = 0;
 	unsigned		i;
 	unsigned		size = max;
 	unsigned		maxpacket =
@@ -561,7 +562,8 @@ alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe)
 			break;
 		case 1:
 			for (j = 0; j < size; j++)
-				*buf++ = (u8) ((j % maxpacket) % 63);
+				*buf++ = (u8) (((j + n_size) % maxpacket) % 63);
+			n_size += size;
 			break;
 		}
 
drivers/usb/serial/io_edgeport.c +38 -18

97 lines not on this page · raw message

drivers/usb/serial/keyspan.c +4 -0
index e07b15ed5814..7faa901ee47f 100644
@@ -2376,6 +2376,10 @@ static void keyspan_release(struct usb_serial *serial)
 
 	s_priv = usb_get_serial_data(serial);
 
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
drivers/usb/serial/mxuport.c +10 -0
index 31a8b47f1ac6..c6596cbcc4b6 100644
@@ -1259,6 +1259,15 @@ static int mxuport_attach(struct usb_serial *serial)
 	return 0;
 }
 
+static void mxuport_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+
+	usb_serial_generic_close(port1);
+	usb_serial_generic_close(port0);
+}
+
 static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1361,6 +1370,7 @@ static struct usb_serial_driver mxuport_device = {
 	.probe			= mxuport_probe,
 	.port_probe		= mxuport_port_probe,
 	.attach			= mxuport_attach,
+	.release		= mxuport_release,
 	.calc_num_ports		= mxuport_calc_num_ports,
 	.open			= mxuport_open,
 	.close			= mxuport_close,
drivers/usb/serial/option.c +148 -7

192 lines not on this page · raw message

drivers/usb/serial/quatech2.c +1 -0
index 504f5bff79c0..b18974cbd995 100644
@@ -141,6 +141,7 @@ static void qt2_release(struct usb_serial *serial)
 
 	serial_priv = usb_get_serial_data(serial);
 
+	usb_kill_urb(serial_priv->read_urb);
 	usb_free_urb(serial_priv->read_urb);
 	kfree(serial_priv->read_buffer);
 	kfree(serial_priv);
drivers/watchdog/sp5100_tco.c +10 -5
index 6467b91f2245..028618c5eeba 100644
@@ -73,6 +73,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
 /*
  * Some TCO specific functions
  */
+
+static bool tco_has_sp5100_reg_layout(struct pci_dev *dev)
+{
+	return dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	       dev->revision < 0x40;
+}
+
 static void tco_timer_start(void)
 {
 	u32 val;
@@ -129,7 +136,7 @@ static void tco_timer_enable(void)
 {
 	int val;
 
-	if (sp5100_tco_pci->revision >= 0x40) {
+	if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
 		/* For SB800 or later */
 		/* Set the Watchdog timer resolution to 1 sec */
 		outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
@@ -342,8 +349,7 @@ static unsigned char sp5100_tco_setupdevice(void)
 	/*
 	 * Determine type of southbridge chipset.
 	 */
-	if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
-	    sp5100_tco_pci->revision < 0x40) {
+	if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
 		dev_name = SP5100_DEVNAME;
 		index_reg = SP5100_IO_PM_INDEX_REG;
 		data_reg = SP5100_IO_PM_DATA_REG;
@@ -388,8 +394,7 @@ static unsigned char sp5100_tco_setupdevice(void)
 	 * Secondly, Find the watchdog timer MMIO address
 	 * from SBResource_MMIO register.
 	 */
-	if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
-	    sp5100_tco_pci->revision < 0x40) {
+	if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
 		/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
 		pci_read_config_dword(sp5100_tco_pci,
 				      SP5100_SB_RESOURCE_MMIO_BASE, &val);
fs/cifs/sess.c +80 -59

167 lines not on this page · raw message

fs/cifs/smb2glob.h +1 -0
index bc0bb9c34f72..0ffa18094335 100644
@@ -44,6 +44,7 @@
 #define SMB2_OP_DELETE 7
 #define SMB2_OP_HARDLINK 8
 #define SMB2_OP_SET_EOF 9
+#define SMB2_OP_RMDIR 10
 
 /* Used when constructing chained read requests. */
 #define CHAINED_REQUEST 1
fs/cifs/smb2inode.c +6 -2
index 899bbc86f73e..4f0231e685a9 100644
@@ -80,6 +80,10 @@ smb2_open_op_close(const unsigned int xid, struct cifs_tcon *tcon,
 		 * SMB2_open() call.
 		 */
 		break;
+	case SMB2_OP_RMDIR:
+		tmprc = SMB2_rmdir(xid, tcon, fid.persistent_fid,
+				   fid.volatile_fid);
+		break;
 	case SMB2_OP_RENAME:
 		tmprc = SMB2_rename(xid, tcon, fid.persistent_fid,
 				    fid.volatile_fid, (__le16 *)data);
@@ -191,8 +195,8 @@ smb2_rmdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
 	   struct cifs_sb_info *cifs_sb)
 {
 	return smb2_open_op_close(xid, tcon, cifs_sb, name, DELETE, FILE_OPEN,
-				  CREATE_NOT_FILE | CREATE_DELETE_ON_CLOSE,
-				  NULL, SMB2_OP_DELETE);
+				  CREATE_NOT_FILE,
+				  NULL, SMB2_OP_RMDIR);
 }
 
 int
fs/cifs/smb2pdu.c +16 -0
index 42e1f440eb1e..8f38e33d365b 100644
@@ -2575,6 +2575,22 @@ SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
 }
 
 int
+SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+		  u64 persistent_fid, u64 volatile_fid)
+{
+	__u8 delete_pending = 1;
+	void *data;
+	unsigned int size;
+
+	data = &delete_pending;
+	size = 1; /* sizeof __u8 */
+
+	return send_set_info(xid, tcon, persistent_fid, volatile_fid,
+			current->tgid, FILE_DISPOSITION_INFORMATION, 1, &data,
+			&size);
+}
+
+int
 SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
 		  u64 persistent_fid, u64 volatile_fid, __le16 *target_file)
 {
fs/cifs/smb2proto.h +2 -0
index 4f07dc93608d..eb2cde2f64ba 100644
@@ -141,6 +141,8 @@ extern int SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon,
 extern int SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
 		       u64 persistent_fid, u64 volatile_fid,
 		       __le16 *target_file);
+extern int SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+		      u64 persistent_fid, u64 volatile_fid);
 extern int SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
 			     u64 persistent_fid, u64 volatile_fid,
 			     __le16 *target_file);
fs/hpfs/super.c +32 -10

80 lines not on this page · raw message

include/asm-generic/qspinlock.h +26 -1
index 39e1cb201b8e..332da3ad8eb5 100644
@@ -28,7 +28,30 @@
  */
 static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
 {
-	return atomic_read(&lock->val);
+	/*
+	 * queued_spin_lock_slowpath() can ACQUIRE the lock before
+	 * issuing the unordered store that sets _Q_LOCKED_VAL.
+	 *
+	 * See both smp_cond_acquire() sites for more detail.
+	 *
+	 * This however means that in code like:
+	 *
+	 *   spin_lock(A)		spin_lock(B)
+	 *   spin_unlock_wait(B)	spin_is_locked(A)
+	 *   do_something()		do_something()
+	 *
+	 * Both CPUs can end up running do_something() because the store
+	 * setting _Q_LOCKED_VAL will pass through the loads in
+	 * spin_unlock_wait() and/or spin_is_locked().
+	 *
+	 * Avoid this by issuing a full memory barrier between the spin_lock()
+	 * and the loads in spin_unlock_wait() and spin_is_locked().
+	 *
+	 * Note that regular mutual exclusion doesn't care about this
+	 * delayed store.
+	 */
+	smp_mb();
+	return atomic_read(&lock->val) & _Q_LOCKED_MASK;
 }
 
 /**
@@ -108,6 +131,8 @@ static __always_inline void queued_spin_unlock(struct qspinlock *lock)
  */
 static inline void queued_spin_unlock_wait(struct qspinlock *lock)
 {
+	/* See queued_spin_is_locked() */
+	smp_mb();
 	while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
 		cpu_relax();
 }
include/asm-generic/siginfo.h +0 -15
index 3d1a3af5cf59..a2508a8f9a9c 100644
@@ -17,21 +17,6 @@
 struct siginfo;
 void do_schedule_next_timer(struct siginfo *info);
 
-#ifndef HAVE_ARCH_COPY_SIGINFO
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(*to));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-}
-
-#endif
-
 extern int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
 
 #endif
include/linux/can/dev.h +20 -2
index 735f9f8c4e43..5261751f6bd4 100644
@@ -40,8 +40,11 @@ struct can_priv {
 	struct can_clock clock;
 
 	enum can_state state;
-	u32 ctrlmode;
-	u32 ctrlmode_supported;
+
+	/* CAN controller features - see include/uapi/linux/can/netlink.h */
+	u32 ctrlmode;		/* current options setting */
+	u32 ctrlmode_supported;	/* options that can be modified by netlink */
+	u32 ctrlmode_static;	/* static enabled options for driver/hardware */
 
 	int restart_ms;
 	struct timer_list restart_timer;
@@ -108,6 +111,21 @@ static inline bool can_is_canfd_skb(const struct sk_buff *skb)
 	return skb->len == CANFD_MTU;
 }
 
+/* helper to define static CAN controller features at device creation time */
+static inline void can_set_static_ctrlmode(struct net_device *dev,
+					   u32 static_mode)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/* alloc_candev() succeeded => netdev_priv() is valid at this point */
+	priv->ctrlmode = static_mode;
+	priv->ctrlmode_static = static_mode;
+
+	/* override MTU which was set by default in can_setup()? */
+	if (static_mode & CAN_CTRLMODE_FD)
+		dev->mtu = CANFD_MTU;
+}
+
 /* get data length from can_dlc with sanitized can_dlc */
 u8 can_dlc2len(u8 can_dlc);
 
include/linux/signal.h +15 -0
index 92557bbce7e7..d80259afb9e5 100644
@@ -28,6 +28,21 @@ struct sigpending {
 	sigset_t signal;
 };
 
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
 /*
  * Define some primitives to manipulate sigset_t.
  */
include/linux/tty.h +1 -1
index 19199c26783f..e5b996d887ce 100644
@@ -338,7 +338,6 @@ struct tty_file_private {
 #define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
 #define TTY_DEBUG 		4	/* Debugging */
 #define TTY_DO_WRITE_WAKEUP 	5	/* Call write_wakeup after queuing new */
-#define TTY_OTHER_DONE		6	/* Closed pty has completed input processing */
 #define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
 #define TTY_PTY_LOCK 		16	/* pty private */
 #define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
@@ -464,6 +463,7 @@ extern void tty_buffer_init(struct tty_port *port);
 extern void tty_buffer_set_lock_subclass(struct tty_port *port);
 extern bool tty_buffer_restart_work(struct tty_port *port);
 extern bool tty_buffer_cancel_work(struct tty_port *port);
+extern void tty_buffer_flush_work(struct tty_port *port);
 extern speed_t tty_termios_baud_rate(struct ktermios *termios);
 extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
 extern void tty_termios_encode_baud_rate(struct ktermios *termios,
include/linux/usb.h +1 -1
index 89533ba38691..f3dbc217ff41 100644
@@ -1066,7 +1066,7 @@ struct usbdrv_wrap {
  *	for interfaces bound to this driver.
  * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
  *	endpoints before calling the driver's disconnect method.
- * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ * @disable_hub_initiated_lpm: if set to 1, the USB core will not allow hubs
  *	to initiate lower power link state transitions when an idle timeout
  *	occurs.  Device-initiated USB 3.0 link PM will still be allowed.
  *
include/scsi/scsi_device.h +1 -0
index ba93c0f69870..a5d31f794cac 100644
@@ -240,6 +240,7 @@ scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
 enum scsi_target_state {
 	STARGET_CREATED = 1,
 	STARGET_RUNNING,
+	STARGET_REMOVE,
 	STARGET_DEL,
 };
 
kernel/events/core.c +36 -16

24 lines not on this page · raw message

kernel/sched/loadavg.c +7 -4
index ef7159012cf3..b0b93fd33af9 100644

Lines of this file are not shown. View the raw message.

kernel/trace/ring_buffer.c +18 -17
index 95181e36891a..9c143739b8d7 100644

Lines of this file are not shown. View the raw message.

scripts/Makefile.extrawarn +1 -0
index f9e47a70509c..53449a6ff6aa 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_realtek.c +30 -1
index 4918ffa5ba68..d53c25e7a1c1 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.